ENG FRE GER SCX-RD100 COAXIAL REMOTE CONTROLLER SPA user manual ITA JAP RUS CZE TUR imagine the possibilities Thank you for purchasing this Samsung product. To receive more complete service, please register your product at www.samsungsecurity.
Safety information 9 CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN 1 CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. C This symbol indicates that dangerous voltage consisting a risk of electric shock is present within this unit.
Safety information 9. If this product fails to operate normally, contact the nearest service center. Never disassemble or modify this product in any way. (SAMSUNG is not liable for problems caused by unauthorized modifications or attempted repair.) 10. When cleaning, do not spray water directly onto parts of the product. Doing so may cause fire or electric shock. ENG CAUTION 1. Do not drop objects on the product or apply strong blows to it.
Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, or other apparatus (including amplifiers) that produce heat. 9.
Contents Introduction Introduction 6 Part names and functions 7 ENG Installation Checking Installation Environment 11 Installation precautions 11 Connection & Control To Control the camera coaxial communications 12 To control the camera using RS-485 device via coaxial communications 13 To control the camera using RS-232 device via coaxial communications 14 To control the camera using RS-485 signal output 15 To control the camera using RS-485 signal output via RS-232 communications 16 Switc
Introduction INTRODUCTION P This product is a remote controller for Samsung’s CCTV cameras of New-generation DSP, via coaxial cable not requiring additional control wirings. ❖ ❖ Features • Long-distance remote control Through RS-485 communication, remote control is possible up to 1.2 kilometers. • Easy Control Easy and simple 5-way keys for controlling the camera.
Introduction PART NAMES AND FUNCTIONS ❖ Front Panel ENG n o p s STATUS r (X)1 23 23 901 (X)10 901 23 78 L ON ON 1 2 1 2 3 4 5 6 7 8 TERMINATION PROTOCOL t 456 S 456 901 ADDRESS (X)100 78 ON 78 OFF CABLE COMPENSATION 456 q POWER POWER REMOTE CONTROLLER SCX-RD100 ❶ STATUS LED - Displays the status of the current operation. ❷ POWER LED - When the controller turns on, it will be turn light. ❸ POWER Switch - If you slide it to ON, the controller turns on.
Introduction ❺ RS-485 TERMINATION & PROTOCOL Setting Switch - You can select to set the RS-485 termination. - Turn this switch ON, if RS-485 termination is required. ON ON 1 2 1 2 3 4 5 6 7 8 TERMINATION PROTOCOL P ❖ - For multi-protocol settings, you can set the protocol and baud rate, and selection of COAXIAL/RS-485 or RS-232. ON ON 1 2 1 2 3 4 5 6 7 8 TERMINATION PROTOCOL - Use pin 1,2,3,4 of the Protocol setting switch to select a protocol.
Introduction PART NAMES AND FUNCTIONS ❖ Rear Panel ENG - AA BATTERY You can use 4 AA-sized batteries for the power. . - The average operation time is 20 hours based on the alkaline battery. (If the battery is discharged, it can cause a distortion of the video signal, or electric interference.) NOTE Remove the battery if you do not use the controller for a longer period. Otherwise, it may cause damage to the controller from a leak of the battery solution.
Introduction ❖ Top C REMOTE CONTROLLER SCX-RD100 TERMINATION 1 2 ON S OFF PROTOCOL 1 2 3 4 5 6 7 8 ON L CABLE COMPENSATION ADDRESS (X)100 ON (X)10 (X)1 POWER STATUS RS-232C n TX o POWER RS-485 VIDEO RX p OUT DC 12V IN IN q r ❶ USB Port - This terminal is used for updating the product’s firmware. ❷ RS-232 Port (9-pin D SUB) - Used to control remotely using RS-232 communication. ❸ RS-485 Port (4-pin) - Used to control remotely using RS-485 communication.
Installation CHECKING INSTALLATION ENVIRONMENT • Please check the following instructions before installation for your safety. • The way of connecting the main product with external devices (COAXIAL BNC) is very important to build up a proper system. INSTALLATION PRECAUTIONS • Make sure you turn off the product before installation. • Do not put a strong force on or shake the product; otherwise it may cause malfunction.
Connection & Control TO CONTROL THE CAMERA COAXIAL COMMUNICATIONS T V REMOTE CONTROLLER SCX-RD100 TERMINATION 1 2 ON S OFF PROTOCOL 1 2 3 4 5 6 7 8 ON L CABLE COMPENSATION ON ADDRESS (X)100 (X)10 (X)1 POWER POWER STATUS 1. Connect the product to DC 12V power source or insert 4 AA-sized batteries into the battery compartment. 1 2. Set the protocol switch 7 to ON. 2 3. Connect the VIDEO IN of the unit and VIDEO OUT of the AI Camera directly.
TO CONTROL THE CAMERA USING RS-485 DEVICE VIA COAXIAL COMMUNICATIONS ENG REMOTE CONTROLLER SCX-RD100 TERMINATION 1 2 ON S OFF PROTOCOL 1 2 3 4 5 6 7 8 ON L CABLE COMPENSATION ON ADDRESS (X)100 (X)10 (X)1 POWER POWER STATUS S Connection & Control 1. Connect the product to DC 12V power source or insert 4 AA-sized batteries into the battery compartment. 2. Set the protocol switch 7 to ON. 3. Connect the VIDEO IN of the unit and VIDEO OUT of the AI Camera directly.
Connection & Control TO CONTROL THE CAMERA USING RS-232 DEVICE VIA COAXIAL COMMUNICATIONS T O REMOTE CONTROLLER SCX-RD100 TERMINATION 1 2 ON S OFF PROTOCOL 1 2 3 4 5 6 7 8 ON L CABLE COMPENSATION ON ADDRESS (X)100 (X)10 (X)1 POWER POWER STATUS 1. Connect the product to DC 12V power source or insert 4 AA-sized batteries into the battery compartment. 1 2. Set the protocol switches 7 and 8 to ON. 2 3. Connect the VIDEO IN of the unit and VIDEO OUT of the AI Camera directly.
Connection & Control TO CONTROL THE CAMERA USING RS-485 SIGNAL OUTPUT REMOTE CONTROLLER SCX-RD100 TERMINATION 1 2 ON S ENG OFF PROTOCOL 1 2 3 4 5 6 7 8 ON L CABLE COMPENSATION ON ADDRESS (X)100 (X)10 (X)1 POWER POWER STATUS 1. Connect the product to DC 12V power source or insert 4 AA-sized batteries into the battery compartment. 2. Set the protocol switches 7 and 8 to OFF. 3. Connect the RX(+/-) of the unit to the RS-485 (+/-) port of the camera. 4.
Connection & Control TO CONTROL THE CAMERA USING RS-485 SIGNAL OUTPUT VIA RS-232 COMMUNICATIONS S ❖ REMOTE CONTROLLER SCX-RD100 TERMINATION 1 2 ON S OFF PROTOCOL 1 2 3 4 5 6 7 8 ON L CABLE COMPENSATION ON ADDRESS (X)100 (X)10 (X)1 POWER POWER STATUS 1. Connect the product to DC 12V power source or insert 4 AA-sized batteries into the battery compartment. 2. Set the protocol switch 8 to ON. 3. Connect the RX(+/-) of the unit to the RS-485(+/-) port of the camera. N 4.
Connection & Control SWITCH SETTING TABLE ❖ Use a combination of pin 1,2,3,4 of the Protocol setting switch to select a protocol.
Connection & Control – See the following table to set the baud rate. ON ON 1 2 1 2 3 4 5 6 7 8 TERMINATION PROTOCOL 1. SAMSUNG BAUD RATE PIN 5 PIN 6 38400 BPS OFF OFF 19200 BPS ON OFF 9600 BPS OFF ON 4800 BPS ON ON BAUD RATE PIN 5 PIN 6 38400 BPS OFF OFF 9600 BPS ON OFF BAUD RATE PIN 5 PIN 6 19200 BPS OFF OFF 9600 BPS ON OFF 4800 BPS OFF ON BAUD RATE PIN 5 PIN 6 9600 BPS OFF ON 2. PHILIPS 3. PANASONIC 4.
Connection & Control 5. ERNA BAUD RATE PIN 5 PIN 6 2400 BPS ON ON BAUD RATE PIN 5 PIN 6 9600 BPS OFF ON 4800 BPS ON ON ENG Â Only supports 2400 bps 6.
Specifications SPECIFICATIONS D Item Description Communication Method COAXIAL INTERFACE Range Max. 500m (with 5C-HFBT cable) Connector Type D-SUB 9P COAXIAL Port 1 Port BAUD RATE 4800/9600/19200/38400bps (Only Samsung protocol supported) Connector Type 4P Terminal Type RS-232 Port 1 Port BAUD RATE 2400/4800/9600/19200/38400bps (Supports each protocol) RS-485 USB PORT(USB2.0) S/W PROGRAM UPLOAD Composite Video 1.
Specifications DIMENSIONS Unit (mm) ENG English 21
Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with other household waste at the end of their working life.
