Service manual

Disassembly and Reassembly
Samsung Electronics
3-11
3-7 Fuser Ass'y
1. Before you remove the Fuser Ass'y, you should
be power off and remove:
- Side Cover Ass'y (see page 3-9)
2. Remove the one screw and take out the Cover
Sheet Connector.
3. Unplug the one connector.
4. Remove the three screws and take out the Fuser
Ass'y.
6. Remove the two screws and take out the Halo-
gen Lamp.
5. Remove the four screws and take out the Ther-
mostat.
7. After remove the two screw and open the Lower
Ass’y froward tack out the Heat Roller Ass’y
from Upper Fuser Ass’y.
Halogen Lamp
Thermostat
Heat Roller