User manual

COLOR DOME CAMERA SCV-2080
12
COLOR DOME CAMERA SCV-2080
13
Installation
1) Using the L-wrench provided, loosen
3 screws by turning them
counterclockwise and separate the
dome cover.
2) Lift up the inner cover while gently
pressing both ends to separate it from
the unit.
Installation
3) Loosen 3 screws by turning them
counterclockwise, press both left
and right lock releases inwards (in
arrow direction) to unlock the
stopper, and then separate the
camera from the case.
Installing the camera on a ceiling or wall
Disassembling
1) Affix the mounting template(supplied) to
the mounting surface.
2) Drill holes (diameter 5mm, more than 35mm
deep) on the ceiling by matching to the holes
on the case bed, and insert plastic anchors
(HUD 5) fully into the holes. Fix the case bed
on the ceiling by using Tapping Screws
(TH M4xL30). (4 places)
3) Connect power and video cables and
arrange cable running not to damage or
squeeze them, and assemble the camera
unit in the reverse way.
4)
Pass the power and BNC cable through the
hole you want to pass them when mounting
the main body on the mounting bracket.
5) Secure the camera on its mounting bracket
with the four screws.
Ø5 tapping screw x 4 (supplied)
M4 machine screw x 3
Case
Main Body (Camera)
Inner cover
Dome Cover