User manual

ManualsBrandsSamsung ManualsHome building and DecorSCV-2080

COLOR DOME CAMERA SCV-2080



AWC ĄSET :

To find the optimal luminance level for the current environment, point the

camera towards a sheet of white paper and press the Function Setup switch.

If the environment changes, readjust it.

• White Balance may not work properly under the following conditions. In this case select

the OUTDOOR mode.

❶ When the color temperature of the environment surrounding the subject is out of

the control range (e.g. clear sky or sunset).

➋



When the ambient illumination of the subject is dim.

➌



If the camera is directed towards a fluorescent light or is installed in a place where

illumination changes dramatically, the White Balance operation may become unstable.

Notes

MAIN SETUP

1.LENS DC

2.EXPOSURE

3.WHITE BAL ATW

4.SSDR

OFF

5.BACKLIGHT OFF

44%34BNTVOH4VQFS%ZOBNJD3BOHF

SSDR illuminates darker areas of an image while retaining the same light level for brighter

areas to even out the overall brightness of images with high contrast between bright and

dark areas.

1. When the SETUP menu screen is displayed, select ‘SSDR’ by using the Function Setup

switch so that the arrow indicates ‘SSDR’.

2. Use the Function Setup switch to change the SSDR level in the sub menu according to the

contrast between bright and dark areas.

SSDR OFF

SSDR ON

BACKLIGHT

Unlike conventional cameras, the SCV-2080 is designed so that it delivers a distinctive

subject and background at the same time, even when the subject is in backlight, by

adopting a function of the proprietary W-V DSP chip.

1. When the SETUP menu screen is displayed, select ‘BACKLIGHT’ by using the Function

Setup switch so that the arrow indicates ‘BACKLIGHT’.

Select a desired mode using the Function Setup switch depending on the camera purpose.

OFF : Not being used



BLC :

Enables a user to select a desired area on a picture and view that area more clearly.

- LEVEL : Adjusts the brightness level of a monitoring area.

- TOP/BOTTOM/LEFT/RIGHT : Adjust the area to be enhanced.