User Manual

58_
setup
setup
Tracking :
This will detect and trace a moving object. You can use the fence
function to count the moving objects. The default setting is the
same as in the Detect menu, to which the Fence Position function
is added.
Fence : Specify the position and detectable direction of the line
fence or area fence, depending on the fence type.
Display: Specify the display of the fence status.
Type : You can select one of two types for the fence LINE and
AREA.
Count : Display the number of times that an object enters or
exits from the fence.
In some cases, the Count function may have a difference between number
of the detected objects and counter number.
Fill : Specify the use of color fi lling on the selected fence.
Position : Specify the position and detectable direction of the line
fence or area fence, depending on the fence type.
LINE FENCE
SEL POS: Select a changing point from position 1 and
position 2.
X POS/Y POS: Specify the position of the changing point that
you have selected in the SEL POS menu.
DIRECTION:
DIR 1: Detect an object that moves from left to right based on the specifi ed fence line.
DIR 2: Detect an object that moves from right to left based on the specifi ed fence line.
DIR 1/2: Detect an object that moves in any direction of right to left or left to right based on the
specifi ed fence line.
AREA FENCE
SEL POS: Select a changing point from position 1 through
position 4.
X POS/Y POS: Specify the position of the changing point that
you have selected in the SEL POS menu.
DIRECTION:
IN: Detect any object that enters the specifi ed fence area.
OUT: Detect any object that exits from the specifi ed fence area.
IN/OUT: Detect any object that enters or exits from the specifi ed fence area.
z
-
y
y
y
M

y
y

-
-
-

-
-
-
Tracking
Fence
Detect Box ON
Detect Area
Mask Area
Sensitivity 3
Det. Size 3
Fence
Display ON
Type LINE
Count ON
Fill ON
Position
Æ
Fence
SEL POS POS1
X POS 25
Y POS 01
Direction DIR 1
Fence
SEL POS POS1
X POS 20
Y POS 20
Direction IN