User Manual

setup
54_
setup
Others
Sync : Select Internal or Line Lock.
INTERNAL : Synchronizes the camera’s output timing to the
internal crystal.
LINE LOCK : Synchronizes the camera’s output timing to
the AC adapter power to synchronize multiple
cameras. This option is useful when using a
switch such as Matrix Switcher.
LINE LOCK PHASE :
Enables setting the adapter’s
synchronization phase between 0 and 359°.
Image Adj :
Sharpness : Sharpens outlines of an image.
ON : It is used to adjust the boundaries of image.
OFF : It deactivates adjustment of the boundaries of image.
ER : It strengthens the adjustment of boundaries of video to
the maximum.
Color : Adjusts the color density of an image.
Freeze : Stops or reanimates an image.
Stabilizer : The Stabilizer compensates for any small
movements of the camera caused by due to the
wind and other reasonable causes
The Stabilizer uses the digital zoom and may cause low picture quality.
The Stabilizer is disabled if the ambient light is too low.
The Stabilizer is disabled if the fi eld of view has very low or no contrast,
e.g. The sky or a white wall.
Dome Cover (Indoor Model) :
The existence of the dome cover will minimize the quality
difference according to the image formation position.
OFF : If removing the dome cover before use
ON : If using the product by factory default (using the dome cover)
z
-
-
*
z
-



-
z
z
M



z
-
-
Camera Setting
Zoom/Focus
White Balance ATW
Exposure
Back Light OFF
AGC HIGH
SSNR
MEDIUM
SSDR
Day/Night
Others
Æ
Main Menu
Camera Setting
Sequence Setting
P/T Setting
OSD Setting
Alarm Setting
Initialize
Password Setting
Status
Æ
Others
Sync INTERNAL
Image Adj
Freeze OFF
Stabilizer OFF
Dome Cover ON