High Resolution 12X IR Camera SCO-2120R User Guide Before installing and operating this product, please read this manual thoroughly.
Before operating the camera, confirm the camera model and correct input power voltage. In order to that you can understand this manual thoroughly, we will explain the model description.
Contents Contents Features • Features………………………………………………………………… 5 • Warnings & cautions…………………………………………………… 6 • Precautions…………………………………………………………… 7 A/F 12X Optical ZOOM Outdoor Visibility range 70M The built-in SCO-2120R optical zoom lens is a highly durable component. It feature auto focus, auto iris, and zoom functions. The IR LEDs of the SOC-2120R automatically illuminates viewing area in the extreme darkness allowing the camera a long-range visibility of up to 70 meters.
Precautions Samsung Techwin cares for the environment at all product manufacturing stages to preserve the environment, and is taking a number of steps to provide customers with more environment-friendly products. The Eco mark represents Samsung Techwin's will to create environment-friendly products, and indicates that the product satisfies the EU RoHS Directive. Do not install under extreme temperature conditions. Do not install in high humidity environment.
Components and Accessories Precautions Do not drop the camera or subject it to physical shock. Never keep the camera face to strong light directly. ❶ 2 ❻ May cause a product malfunction. May damage the CCD. 3 ❹ ➎ ➐ ❶ SCO-2120R 2 Sunshield 3 L-type hexagon wrenches (3.0mm) 4 Sunshield Adaptor (1EA) 5 Tapping Screw (3EA) ❻ User Guide ➐ Installation Video Output Cable Overview Do not expose the camera to radioactivity. FRONT 3 2 ❶ 5 6 Radioactivity exposure may damage the CCD.
Overview Notes SIDE • To ensure the weatherproof integrity is maintained, ensure the front cover is tightened correctly. BACK Front cover Function Setup Switch 7 9 8 7P ower input terminal : Connect the power as specified for each model here. 8 Video output terminal : V ideo signals are output through this port. Connect this port to the Video IN port of a monitor.
Connection Connecting to Monitor Connecting to Power Please connect the video output terminal located on the back of the camera to the monitor. The recommended adaptor specification for SCO-2120RN/P is DC 12V/4A, AC 24V/1A over. Please check the standard power requirement before connecting the power. Monitor CCD Camera • The connection method varies depending on the type of monitor and accessories. Please refer to the user's manual for each instrument. • Please turn off the power when connecting.
Connection Using Coaxial Communications RS-485 communication control •C oaxial Communications System • OSD Control method Connecting to RS-485 Control Cable CONTROL CABLE SPEC WHITE (TRX+) BLUE (TRX-) RS-485+ RS-485- Using RS-485 communication will enable you to control the OSD menu from a SAMSUNG TECHWIN System Controller or DVR. (1) Connection to a PC.
Operating Your Camera Menu Configuration Menu Setup Use the Function Setup switch within the camera.
Operating Your Camera ※ Select one of the following 5 modes, as appropriate for your purpose. SSDR (Samsung Super Dynamic Range) SSDR illuminates darker spots of an image while retaining the same light level for brighter spots to even out the overall brightness of images with high contrast between bright and dark spots. MAIN SETUP SSDR WHITE BAL ON ATW 1. When the SETUP menu screen is displayed, select ‘SSDR’ by using the switch so that the arrow indicates ‘SSDR’. 2.
Operating Your Camera 2. Select a desired mode using the Function Setup Switch. OFF : Not being used BLC : Enables a user to directly select a desired area from a picture, and to view the area more clearly. HLC (High Light Compensation) : If the scene contains extremely bright light areas such as; from car headlight, the light can mask out much of the on-screen detail. - LEVEL : Adjust level of the HLC function.
Operating Your Camera - START ZOOM : By moving the left or right direction of the Function Setup Switch in the ‘START ZOOM’ item to select the zoom position from 1x to 12x to be returned after the ‘SMART ZOOM’ action is over. - TARGET ZOOM : By moving the left or right direction of the Function Setup Switch in the ‘TARGET ZOOM’ item to select the zoom position from 1x to 12x to be used during MOTION DETECTION.
Operating Your Camera - MANUAL : Select 'MANUAL' and press the Function Setup Switch to confirm. Increase or decrease optical zoom (ZOOM) or digital zoom (D-ZOOM) positions moving directional key of Function Setup Switch while verifying the changes on screen. Press the Function Setup Switch until the desired image quality is obtained. Focus can be manually adjusted, independent of moving zoom. - AUTO : Select AUTO and press the Function Setup Switch to confirm.
Operating Your Camera ZOOM POS INIT : Moves to the controlled ZOOM position when the power is truned on and the initial ZOOM position has been set. FOCUS SETUP MODE AUTO ZOOM TRACK AUTO TRACK ZOOM SPEED FAST D-ZOOM OFF ZOOM POS INIT OFF USER PRESET OFF • AUTO : If you turn the power off and on, the zoom magnification level is set to the previous level that was set before the power went off. • MANUAL : The zoom magnification level can be set from 1x to 12X.
Operating Your Camera direction of the Function Setup Switch and then press the Function Setup Switch. Increase or decrease iris level by moving the left or right direction of the Function Setup Switch while verifying the changes on screen. EXPOSURE MAIN SETUP SSDR WHITE BAL BACKLIGHT MOTION DET FOCUS EXPOSURE SPECIAL ON ATW OFF OFF 1.
Operating Your Camera Notes Notes • Image may become unstable if the camera is set to 'ESC' mode and faces a strong fluorescent light. •U nder 'ESC' mode, the brightness can be adjusted by moving the left or right direction of the Function Setup Switch. GC (Auto Gain Control) : For brighter images. A P osition the indicator over 'AGC' by moving the up or down direction of the Function Setup Switch.
Operating Your Camera 1. Press the Function Setup Switch to access the main setup menu and then position the indicator over 'SPECIAL' by moving the up or down direction of the Function Setup Switch. 2. Press the Function Setup Switch to confirm. PRIVACY : Hide an area you want to hide on the screen. · IR MODE AUTO : T he IR LED is controlled automatically according to brightness of object which is situated on screen center. · MANUAL : You can control WIDE LED and NARROW LED step from 0 to 32.
Operating Your Camera • INT : I nternal synchronization Notes • When using a Video Auto Iris Lens, if you set the lens level to low, automatic switching between Color and Black & White may not occur. • You cannot control the DAY/NIGHT menu when AGC in the EXPOSURE menu is ‘OFF’. At this time, the exchange between DAY mode and NIGHT mode operates as like selecting ‘COLOR’ mode. • The OSD key does not work for 3 seconds when switching to Color or B/W, to ensure stable camera operation.
Operating Your Camera - RET PKT : You can choose whether to send an ACK signal when the communication control command is issued to the camera. SPECIAL SETUP PRIVACY OFF DAY/NIGHT AUTO DIS OFF SYNC INT COMM ADJ IMAGE ADJ MONITOR CRT DISPLAY IMAGE ADJ : Includes image quality or special function factors. SPECIAL SETUP PRIVACY OFF DAY/NIGHT AUTO DIS OFF SYNC INT COMM ADJ IMAGE ADJ MONITOR CRT - CRT : Please select this menu item when using a CRT monitor.
Operating Your Camera DISPLAY : Us e this feature to designate a name for the camera, which will display on the monitor screen SPECIAL SETUP PRIVACY OFF DAY/NIGHT AUTO DIS OFF SYNC INT COMM ADJ IMAGE ADJ MONITOR CRT DISPLAY RETURN Notes CAM TITLE P ress the Function Setup Switch to display the main setup menu and move the arrow indicator to ‘CAM TITLE’ by moving the up or down direction of the Function Setup Switch.
Operating Your Camera Troubleshooting If you have trouble operating your camera, refer to the following table. If the guidelines do not enable you to solve the problem, contact an authorized technician. RESET To reset your camera to factory default condition. (comm,language,monitor exception) EXIT To finish setup menu. • Nothing appears on the screen. ▶ Check that the power cord and line connection between the camera and monitor are fixed properly.
Specifications SCO-2120RN SCO-2120RP POWER Motion Detection ON / OFF (output via communication) (8 Areas) Control output RS-485 (2400,4800,9600,19200,38400,57600bps) Input Voltage AC 24V(±10%) , DC 12V(±10%) SSNR3 ON / OFF (2D+3D), Level adjustable Power Consumption AC24V, 6.8W / DC12V, 6.
Dimension DECLARATION OF CONFORMITY 118.5mm Application of Council Directive(s) 2004/108/EC Manufacturer's Name SAMSUNG TECHWIN CO., LTD Manufacturer's Address SAMSUNG TECHWIN CO., LTD 42, SUNGJU-DONG CHANGWON-CITY, KYUNGNAM, KOREA, 641-716 European Representative Name Ø77 86mm 274.7mm European Representative Address Equipment Type/Environment CCTV Camera Model Name SCO-2120RP Beginning Serial NO. C3RR6V3Z100001X Year of Manufacture 2010.01.
MEMO COLOR CCD CAMERA 46 User Guide MEMO COLOR CCD CAMERA 47 User Guide
SALES NETWORK • AMSUNG TECHWIN CO., LTD. S Samsungtechwin R&D Center, 701, Sampyeong-dong, Bundang-gu, Seongnam-si, Gyeonggi-do, Korea, 463-400 TEL : +82-70-7147-8740~60 FAX : +82-31-8018-3745 • AMSUNG TECHWIN AMERICA Inc. S 1480 Charles Willard St, Carson, CA 90746, UNITED STATES Tol Free : +1-877-213-1222 FAX : +1-310-632-2195 www.samsungcctvusa.com • AMSUNG TECHWIN EUROPE LTD.
