SCH-u420 Series P O R T A B L E T r i - M o d e T E L E P H O N E User Guide Please read this manual before operating your phone, and keep it for future reference. ZF29.
Intellectual Property All Intellectual Property, as defined below, owned by or which is otherwise the property of Samsung or its respective suppliers relating to the SAMSUNG Phone, including but not limited to, accessories, parts, or software relating there to (the “Phone System”), is proprietary to Samsung and protected under federal laws, state laws, and international treaty provisions.
Samsung Telecommunications America (STA), Inc. Licensed by Qualcomm Incorporated under one or more of the following patents: U.S. Patent No. 4, 901, 307; 5, 056, 109; 5, 099, 204; 5, 101, 501; 5, 103, 459; 5, 107, 225; 5, 109, 390. GH68-011291A Openwave® is a registered Trademark of Openwave, Inc. RSA® is a registered Trademark RSA Security, Inc.
Table of Contents Table of Contents Samsung Telecommunications America (STA), Inc. ..........2 Section 1: Getting Started ................................. 9 Understanding this User Manual .....................................10 Activating Your Phone ....................................................11 Charging the Battery ......................................................13 Setting Up Your Voice Mail .............................................15 Section 2: Understanding Your Phone ............
Table of Contents Changing the Text Entry Mode ........................................74 Entering Text in Alpha (Abc) Mode ..................................75 Entering Text in T9 Word Mode .......................................75 Entering Upper and Lower Case Letters ..........................77 Entering Numbers ..........................................................77 Entering Symbols ...........................................................78 Section 6: Understanding Your Contacts ........
Table of Contents The Photo Gallery .........................................................133 Point, Click, and Send a Photo ......................................134 Section 10: Axcess Web ................................ 135 Axcess Web .................................................................136 Launching Axcess Web ................................................136 Using Axcess Web ........................................................137 Using Links ......................................
Table of Contents Memory Info .................................................................198 Section 14: Phone Info ................................... 201 Phone Number .............................................................202 Icon Glossary ................................................................202 Version .........................................................................202 Section 15: Health and Safety Information ... 203 Health and Safety Information ......................
Section 1: Getting Started Topics Covered • Understanding this User Manual • Activating Your Phone • Charging the Battery • Setting Up Your Voice Mail Section 1 This section explains how to start using your phone by activating your service, setting up your voice mail, or getting an understanding of how this manual is put together.
Understanding this User Manual The chapters of this guide generally follow the same order as the menus and sub-menus in your phone. A robust index for quick reference to most features begins on page 241. Section 1 Also included is important safety information that you should know before using your phone. Most of this information is near the back of the guide, beginning on page 203. Notes and tips Throughout this guide are icons and text that are set apart from the rest.
Activating Your Phone Activating Your Phone Contact your Wireless Carrier and follow their instructions for obtaining service, if necessary. We suggest that you read this guide to fully understand the services your phone supports. Install the Battery Note: Your phone comes packaged with a partially charged rechargeable standard Li-Ion battery and travel adapter. 1. Insert the bottom end of the battery first, matching the gold contacts on the bottom end of the battery to those inside of the phone. 2.
Turn Your Phone On 1. Open the slide on your phone. 2. Press the END key. Note: As with any other radio-transmitting device, do not touch the antenna while using your phone as this can affect call quality and can cause the phone to operate at a higher power level than is necessary. Section 1 3. The phone begins searching for a network signal. 4. Once the phone finds a signal, the time, date and day appear in the bottom of the display. 5. You’re now ready to place and receive calls.
Charging the Battery 2. Press the battery cover at point (1) and slide the cover (2) toward the top end of the phone. 3. Lift the battery (1) up and away from the phone (2), top end first. Your phone is powered by a rechargeable standard LiIon battery. Only use Samsung-approved charging devices and batteries. Samsung accessories are designed to maximize battery life. Using other accessories may invalidate your warranty and may cause damage.
2. Insert the smaller end of the Travel Adapter into the charger/accessory connector at the lower right side of your phone. Section 1 CORRECT INCORRECT! (Incorrect insertion will cause damage to the phone.) Note: With the phone turned OFF, a discharged battery recharges fully in approximately 200 minutes. Low battery indicator The battery indicator ( ) in the upper-right corner of the display indicates power level. Monitor the battery strength and ensure your battery is adequately charged.
Setting Up Your Voice Mail • A blinking empty battery icon ( ) and a tone sounding indicate you have two to three minutes before the battery is too low to operate the phone. If you continue to use your phone without charging its battery, the phone shuts down. Setting Up Your Voice Mail Voice mail allows callers to leave voice messages, which can be retrieved any time.
Section 1
Section 2: Understanding Your Phone Topics Covered • Features of Your Phone • Closed View of Your Phone • Open View of Your Phone • Rear View of Your Phone • Command Keys • Understanding the Display Screen • Your Phone’s Modes Section 2: Understanding Your Phone 17 Section 2 This section outlines some key features of your phone. It also displays the screen and the icons that are displayed when the phone is in use.
Features of Your Phone • Domestic and international voice and text messaging service (available on participating networks).
Closed View of Your Phone Closed View of Your Phone 8. Earpiece/Speaker 1. Volume Keys 7. Speakerphone Key 2. Display 6. Camera Key 3. Left Soft Key 4. External Keypad 5. Power-Accessory Connector Features When receiving a call, mutes the ringer and can reject the call to Voice mail. 2. Display — Indicates the status of your phone, including status icons, message indicators, signal strength, and so on. Shows menus, calls, and messages. 3.
With the phone closed and unlocked, used to navigate through menus and applications and to select the choice available as the Left Soft key option. 4. External Keypad — Used with the phone closed (and when unlocked by the Left Soft key) to navigate through menus, to select options. 5. Power/Accessory Connector — Used to plug in the charging accessories and also connect any available accessory cables to your phone. Lets you plug in an optional headset for safe, convenient, hands-free conversations. 6.
Open View of Your Phone Open View of Your Phone 1. Earpiece/Speaker 2. Display Screen 17. Speakerphone Key 3. Volume Keys 4. Navigation Key 5. Left Soft Key 16. Right Soft Key 15. OK Key 14. Camera Key 6. Send Key 13. End Key Section 2 12. Clear Key 11. Alpha-numeric Keys 10. Power Accessory Connector 9. Voice Recognition Key 7. Special Function Keys 8. Microphone Features 1. Earpiece/Speaker — Lets you hear the other caller.
2. Display Screen — Indicates the status of your phone, including status icons, message indicators, signal strength, and so on. Shows menus, calls, and messages. 3. Volume Keys — During a call, adjusts the earpiece volume. In standby mode with the phone open, adjusts the ring volume. When receiving a call with the phone open or closed, mutes the ringer and can reject the call to Voice mail. 4. Navigation Key — Lets you scroll through the phone menu options. 5.
Open View of Your Phone 12. Clear Key — Deletes characters from the display when you are in text entry mode. Press this key to return to the previous menu or screen when navigating features on your phone. 13. End Key — Ends a call. If you press and hold the END key, the power goes On or Off. When you receive an incoming call, press to mute the ringer and send the call to voicemail. 14. Camera Key — Launches the Camera feature of your phone. 15.
Rear View of Your Phone 1. Mirror 2. Camera 8. Flash 3. Speaker Mode Key 7. Volume Keys Section 2 4. Camera Key 5. Power-Accessory Connector 6. Rear Speaker Features 1. Mirror — Lets you center the camera when taking a picture of yourself.
Command Keys 2. Camera — The lens of your built-in camera. 3. Speaker Mode Key — Enables and disables Speakerphone mode. 4. Camera Key — Launches the Camera feature of your phone. 5. Power/Accessory Connector — Used to plug in the charging accessories and also connect any available accessory cables to your phone. Lets you plug in an optional headset for safe, convenient, hands-free conversations. 6. Rear Speaker — Lets you hear the other caller in Speakerphone mode, alerts, and ringtones. 7.
• When the left soft key function is Edit, press the Edit (left) soft key ( ) to edit a Contact. Right Soft Key Some functions of the right soft key are as follows. • In standby mode, press the Message (right) soft key ( ) to open the Messages menu. • When the right soft key function is Back, press the Back (right) soft key ( ) to back up one menu level. • When the right soft key function is Options, press the Options (right) soft key ( ) and a pop-up menu appears.
Command Keys End Key 1. In standby mode, press and hold the End key ( turn your phone off. 2. Briefly press END END ) to once to disconnect a call. 3. Press END to return to standby mode from any menu, or to cancel the last input. 4. With your phone turned off, press on. END to turn your phone Send Key The Send key ( ) is used to answer calls, dial calls, and to recall the last number(s) dialed, received, or missed. SEND 1. Press SEND once to answer calls. 2.
Speakerphone Key Use the speakerphone key ( ) — located on the right side of your phone — to switch from using the earpiece to the speakerphone before or during a call. Use the volume keys — located on the left side of your phone — to adjust the volume. Press the speakerphone key to enable and disable the speakerphone option. Camera Key Use the camera key ( ) — located on the right side of your phone — to activate the camera built into your phone and to take pictures.
Understanding the Display Screen No service indicator — Indicates your phone cannot find a signal because you’re outside a service area. You cannot make or receive calls. Wait for a signal or move into an open area to try and find a signal. The no service indicator always appears when you turn on your phone and disappears once service is located. Roam — Roaming occurs when you use your phone outside your home area.
Vibrate—The ringer has been set to Vibrate using the volume key on the side of the phone. When you receive a call, the phone vibrates but does not ring. Vibrate plus Ring—The ringer has been set to Vibrate/ High using the volume key on the side of the phone. When you receive a call, the phone vibrates and rings. Ring — The ringer has been set to Low, Low/Medium, Medium, Medium/High, or High using the volume key on the side of the phone. When you receive a call, the phone rings.
Your Phone’s Modes 䢇 Example: “Message saved in drafts” • Information 䢇 Example: “New Message” • Error 䢇 Example: “System Error!” • Warning 䢇 Example: “Battery Low,” “Memory Full!” Backlights Backlights illuminate the internal and external displays and the keypad. When you press any key or open the phone, the backlights come on. They go off when no keys are pressed within a period of time set in the Backlight menu.
To unlock your phone’s front keypad while closed: 1. Press the Unlock (left) soft key ( to press the key. ). You are prompted OK 2. Press the OK key. The phone enters standby mode. Now, all external keys, except the Camera key, are active. You can now use a number of your phone’s functions, such as, reviewing your messages and launching Axcess Shop and Axcess Web. Idle Mode Call Answer Mode You can select how you wish to answer a call. 1.
Your Phone’s Modes Input mode Input mode determines how you enter text, numbers and symbols. While at any text entry screen, press the Option (left) soft key ( ), then choose the input mode from the pop-up menu using the navigation keys. Optional input modes are T9 Word, Abc, ABC, Symbols, 123, and Quick Text. (See “Section 5: Entering Text” on page 73 for more information.) Tip: You can also cycle between T9 Word, ABC, and 123 by repeatedly pressing and holding the key.
1. While in standby mode, enter a phone number, and press to place a call. SEND 2. Press END to return to standby mode. Receive Messages in Standby Mode You can receive messages in standby mode. An alert tone sounds and a notification message appears in the display when a new message arrives. The following options also appear in the display: • View Now • View Later Use the navigation keys to highlight the desired option and press the key.
Your Phone’s Modes Vibrate Mode 䡵 In standby mode, repeatedly press and the Down volume key ( ) until Vibrate appears in the display. The volume key is on the upper left side of phone, near the left soft key ( ). Adjust the Ringer 1. In standby mode, press the volume key ( ) on the left side of the phone up or down. Options are: 䢇 䢇 䢇 䢇 Ringer Off Vibrate Low Low/Medium 䢇 䢇 䢇 䢇 Medium Medium/High High Vibrate/High 2. When you are satisfied with the setting, press the SET ( ) key.
• Entering Camera Mode — In standby mode, press the Camera key ( ) on the keypad or on the upper right side of your phone. Section 2 • Exiting Camera Mode — Press the 36 END key.
Section 3: Call Functions Topics Covered • Making a Call — Number Entry Dialing • Making a Call — Speed Dialing • Making a Call — Voice Dialing • Answering a Call • Ignoring a Call • Adjusting the Call Volume • Calls Log • Phone Modes • Roaming This section explains how to make or answer a call. This section also includes the features and functionality associated with making or answering a call.
Making a Call — Number Entry Dialing 1. With the phone on, enter the number you wish to call using the keypad. 2. Press the SEND key to place the call. Dialing Emergency Numbers To place an emergency call: 1. With the phone on, enter 911 using the keypad. 2. Press the SEND key to place the call. You can specify other numbers as emergency numbers using the Emergency # settings. (See “Emergency #” on page 191 for more information.) IMPORTANT! Emergency number 911 is hard-coded into your phone.
Making a Call — Number Entry Dialing Dialing International Numbers Call another country from the U.S. 1. In standby mode, enter the three-digit exit code (011) for the United States. 2. Enter the country code for the country that you are calling. 3. Enter the number that you wish to call, then press the key. SEND Note: Puerto Rico and Canada are on the North American dialing plan.
• P pause — A hard pause stops the calling sequence until you press the SEND key. • T pause — A two-second pause stops the calling sequence for two seconds and then automatically sends the remaining digits. To manually call a number with pause(s) without storing it to your Contacts: 1. Enter the number you wish to call. 2. Press the Options (right) soft key ( ). A pop-up menu containing the following options appears in the display: 䢇 䢇 P pause — a hard pause (awaits input from you).
Making a Call — Speed Dialing One-Touch Dialing Memory locations 002 through 009 are special OneTouch dialing locations. You can call the phone numbers stored in your phone’s Contacts list from 002 through 009 by pressing and holding a single key. Example: For location number 003, press and hold the 3 key until the name and number appear in the display and the number is dialed. def Two-Touch Dialing Memory locations 010 through 099 are special TwoTouch dialing locations.
Making a Call — Voice Dialing Your SCH-U420 mobile phone includes state-of-the-art voice recognition software that lets you dial numbers using your voice. Using Voice Dial Use the Voice Dial command to dial any number stored in your Contacts list by saying the name of the contact (Name Dialing). You can also use Voice Dial to dial any valid telephone number, even numbers not stored in your contact list, by speaking the individual digits in the number (Digit Dialing).
Making a Call — Voice Dialing If Voice Dial is not sure which name you said, it displays a choice list of up to three names and prompts you with “Did you say?” followed by the first name on the list. 4. Say “Yes” to confirm the name or “No” to hear the next name, or use the keypad to select the correct name from the list. (See “Choice Lists” on page 153, for more information.) 䢇 䢇 Press the Repeat (right) soft key ( ) to say the name again.
3. Speak clearly and say the telephone number of the person you want to call. For example, say “7 8 1 9 7 0 5 2 0 0." If it recognizes the number, Voice Dial repeats it and dials the number. If Voice Dial is not sure it has recognized the number, it displays a choice list of up to three numbers and prompts you with “Did you say?” followed by the first number on the list. 4. Say “Yes” to confirm the number or “No” to hear the next one, or use the keypad to select the correct number from the list.
Ignoring a Call • A phone number (unless blocked by the caller) and a name appear in the display (If the caller’s number and name are stored in your Contacts list). • If the caller can’t be identified, Call from unavailable#, Call from restricted number, or no number appears in the display. • Your phone continues to notify you of the call until one of the following events occurs: • You answer the call. • You ignore the call. • The calling party ends the call. • The call is sent to voicemail.
Calls Log The Calls log retains information about Outgoing, Incoming, and Missed calls. You can also view times for your last call and the time totals for all calls. Review the Calls Log 1. In standby mode, press the Menu (left) soft key ( The Main Menu appears in the display. 2. Press the 6mno ). key (for Calls). 3.
Calls Log Note: To quickly view your most recent calls, briefly press in standby mode. Up to 270 of your most recent outgoing, incoming, and missed calls appear in the display. SEND 1. In standby mode, press the Menu (left) soft key ( ) then press 6 (for Calls) and 1 for Outgoing Calls. A list of your outgoing calls appears in the display. mno @ )) 2. Use the navigation keys to highlight a call, then press to view further information about the call. OK 3. Press the Options (right) soft key ( ).
Incoming Calls Your phone retains information about the last 90 Incoming calls and stores them in the Incoming call log. You can review the Incoming call log for the time and date of the call, as well as other information. 1. In standby mode, press the Menu (left) soft key ( ) then press 6 (for Calls) and 2 for Incoming Calls. A list of your Incoming calls appears in the display. mno abc 2. Use the navigation keys to highlight a call, then press to view further information about the call. OK 3.
Calls Log 6. Press the function. OK key to perform the highlighted option’s Missed Calls Your phone retains information about the last 90 missed calls (calls that were never picked up) and stores them in the Missed call log. You can review the Missed call log for the time and date of the call, as well as other information. 1. In standby mode, press the Menu (left) soft key ( ) then press 6 (for Calls) and 3 for Missed Calls. A list of your missed calls appears in the display. mno def 2.
Note: See “Creating and Sending New Messages” on page 98 for more information. 5. Use the navigation keys to highlight an option. 6. Press the function. key to perform the highlighted option’s OK Data Call Your phone retains information about the last 90 data calls and stores them in the Data call log. You can review the Data call log for the time and date of the call, as well as other information. 1. In standby mode, press the Menu (left) soft key ( ) then press 6 (for Calls) and 4 for Data Call.
Calls Log Erase History You can erase the Outgoing, Incoming, Missed, or Data calls log or you can erase All Calls. Erase All Calls 1. In standby mode, press the Menu (left) soft key ( ) then press 6 (for Calls), 5 (for Erase History), and 5 for All Calls. mno jkl jkl “Erase all entries?” appears in the display as well as the following soft keys: 䢇 䢇 Yes — Press the left soft key ( Calls log. No — Press the right soft key ( ) to erase all calls in the ) to cancel erasing calls.
䢇 䢇 Roaming — View the total calls duration on your phone while roaming since the last erasure. Lifetime Calls — View the duration of all calls on your phone since activation (Lifetime Calls timer cannot be reset). 2. Press the Reset (left) soft key ( counter except Lifetime Calls. ) to reset a selected 3. Press the Reset All (right) soft key ( counters except Lifetime Calls. 4. Press the list.
Phone Modes 䢇 Lifetime Data Counter — View the total amount of data sent or received by your phone since activation (Lifetime Data Counter cannot be reset). 2. Press the Reset (left) soft key ( ) to reset a selected counter except Lifetime Data Counter. 3. Press the Reset All (right) soft key ( ) to reset all counters except Lifetime Data Counter. 4. Press the list.
• Change your phone’s mode. • Activate Voice Command. Receive Messages in Standby Mode You can receive messages in standby mode. An alert tone sounds and a notification message appears in the display when a new message arrives. The following options also appear in the display: • View Now • View Later Use the navigation keys to highlight the desired option and press the key. OK Talk Mode While in a call your phone is in talk mode.
Phone Modes Unlock your phone by following the prompts and entering the lock code. Silent Mode With a single press of the key you can silence the call ringer and tones that your keypad makes whenever you press a key. When you receive a call, the phone vibrates instead of ringing. Enter Silent Mode 䡲 In standby mode, press and hold the # key. “Entering silent mode” briefly appears in the display and your phone returns to standby mode. The Silent Mode icon ( display.
䢇 Press the Left navigation key until “Vibrate” appears in the display, then press the SET soft key ( ) key. OK Text Input Modes You use your phone’s text input modes (Alpha, Symbol, Number, or T9 WORD) to enter text, numbers, or symbols into messages, events, and other functions. The current text input mode is indicated in the lower right part of the display. Note: See “Section 5: Entering Text” on page 73 for more information about text input modes.
Phone Modes You press the key that corresponds with the symbol that you wish to enter. For example, press 4 for an exclamation point (!). ghi Number Mode Number mode lets you use keypad number keys to enter numbers into a text message, event, or email address without going through repeated key presses as with Alpha mode. T9 Word Text Entry Mode T9 Word recognizes a commonly used word that is represented by a sequence of number key presses and inserts that word into your message.
Roaming What is Roaming? Roaming lets you use your SCH-u420 phone when you travel outside of your Wireless Provider’s coverage area. The Roaming icon ( ) appears in the top line of the display when Roaming is active, and extra charges may apply when making or receiving calls. Note: Some features may be unavailable while roaming. Roaming also consumes additional power from the battery requiring more frequent recharging. Contact your Wireless Provider for more information about Roaming.
Section 4: Menu Navigation Section 4 Topics Covered • Menu Navigation • Menu Outline This section explains the menu navigation for your phone. It also includes an outline of the menus available with your phone.
Section 4 Menu Navigation Access menus using the navigation keys, the two soft keys ( ), or a shortcut. 1. In Standby Mode, press the Menu (left) soft key ( The first of several menus appears in the display. ). 2. Use the navigation keys to browse phone menus. 3. Press the key to access a menu or sub-menu highlighted in the display. OK Return to the Previous Menu Press the key or the Back (right) soft key ( return to the previous menu.
Menu Navigation Contacts OK Section 4 Ringer Type Axcess Shop Axcess Web The In-Use Options Access numerous menus and features even while in a call. Note: If the call is disconnected while accessing the In-Use Option, the InUse Option disappears from the display and the phone eventually returns to standby mode. 1. While in a call, press the Options (right) soft key ( ). The following menu items appear in the display: 䢇 Message — The Messages menu appears in the display.
2. Do one of the following: Section 4 䢇 䢇 䢇 Use the navigation key to highlight a menu or feature. Press the OK key to open the highlighted menu or to activate the highlighted feature. Press the Mute/Unmute (left) soft key ( ) to disable/ enable the microphone. Press the Back (right) soft key ( ) to exit the menu. Messaging Access messaging features from within a call. 䡵 While in a call, press the Options (right) soft key ( ), then press 1 for Message. The Messages menu items appear in the display.
Menu Navigation Tip: You can also set your phone to Voice Memo: From Standby Mode. In standby mode, press the Menu (left) soft key ( ), then press Multimedia), 4 (for My Sounds), and 1 for Record New. @ ghi 3 def (for )) 2. Press the key, then start speaking. As it is recording the phone displays a countdown timer that shows the seconds remaining for the recording. OK 䢇 To pause the memo, press the Pause (left) soft key ( When a memo is paused, select Resume to continue recording. ). 3.
Erase One Voice Memo 1. In standby mode, press the Menu (left) soft key ( ), then press 3 (for Multimedia) and 4 for My Sounds. A list of sound files appears in the display. Section 4 def ghi 2. Use the navigation keys to highlight the voice memo you wish to erase. 3. Press the Erase (left) soft key ( appears in the display. ). “Erase Sound?” 4. Press the Yes (left) soft key ( ) to erase the selected voice memo or press the No (right) soft key ( ) to return to the list of sound files.
Menu Outline Menu Outline 1 Section 4 Use the menu shortcuts on the following pages to quickly access sub menus. Press the Menu (left) soft key ( ) to access the Main Menu, then use the navigation keys to highlight a sub-menu. Messages 1.1 1.2 1.3 1.4 1.5 1.6 1.7 Send Message 1.1.1 Text Message 1.1.2 Picture Message Inbox Outbox Drafts Voicemail Erase Messages 1.6.1 Inbox 1.6.2 Outbox 1.6.3 Drafts 1.6.4 All Messages Msg Settings 1.7.1 General 1.7.1.1 1.7.1.2 1.7.1.3 1.7.1.4 1.7.1.5 1.7.1.6 1.7.1.
1.7.2 Text Message Section 4 1.7.2.1 1.7.2.2 1.7.2.3 Auto View Signature Auto Scroll 1.7.3 Picture Message 1.7.3.1 1.7.3.2 2 Axcess Shop 2.1 3 Axcess Web Contacts 5.1 5.2 5.3 5.4 66 Camera My Images My Ringtones My Sounds Shuffle 3.5.1 Image Shuffle 3.5.2 Melody Shuffle Axcess Web 4.1 5 Axcess Shop Multimedia 3.1 3.2 3.3 3.4 3.5 4 Auto Receive Signature Find Add New Entry Speed Dial#s Group 5.4.
Menu Outline 6 Calls 6.1 6.2 6.3 6.4 6.5 6.6 7 Outgoing Calls Incoming Calls Missed Calls Data Call Erase History 6.5.1 Outgoing Calls 6.5.2 Incoming Calls 6.5.3 Missed Calls 6.5.4 Data Call 6.5.5 All Calls Call Timer Tools 7.1 Voice Service 7.1.1 Voice Commands 7.1.2 Voice Settings 7.1.2.1 7.1.2.2 7.1.2.3 Choice Lists Sensitivity Digit Dialing 7.1.2.3.1 Adapt Digits 7.1.2.3.2 Reset Digits 7.1.2.4 Sound Section 4: Menu Navigation 67 Section 4 5.5 5.4.2 Business 5.4.3 Colleague 5.4.4 Family 5.4.
Section 4 7.1.2.4.1 7.1.2.4.2 7.1.2.4.3 7.1.2.4.4 7.1.2.5 7.1.2.6 7.2 7.3 7.4 7.5 7.6 7.7 7.8 7.9 7.10 8 68 Bluetooth Calendar Memo Pad Alarm Clock 7.5.1 Alarm 1 7.5.2 Alarm 2 7.5.3 Alarm 3 World Time Calculator Stop Watch Converter 7.9.1 Currency 7.9.2 Length 7.9.3 Weight 7.9.4 Volume 7.9.5 Area 7.9.6 Temperature Tip Calculator Settings 8.1 8.
Menu Outline 8.2.1 Menu Style 8.2.2 Wallpaper My Images Preset Images Image Shuffle Section 4 8.2.2.1 8.2.2.2 8.2.2.3 8.2.3 Clock Format 8.2.4 Theme 8.2.5 Dialing Font 8.2.5.1 8.2.5.2 Style Size 8.2.6 Banner 8.2.7 Backlight 8.2.7.1 8.2.7.2 8.2.7.3 8.3 Main Display Keypad Brightness Sound Settings 8.3.1 Volume 8.3.1.1 8.3.1.2 8.3.1.3 8.3.1.4 Voice Calls Messages Alarms Key Tone 8.3.2 Ringer Type 8.3.2.1 8.3.2.2 Voice Calls Messages 8.3.3 Alerts 8.3.3.1 8.3.3.2 8.3.3.3 8.3.3.4 8.
8.4.1 Restriction Section 4 8.4.1.1 8.4.1.2 8.4.1.3 8.5 Outgoing Incoming Contacts 8.4.2 Call Answer 8.4.3 Auto Answer 8.4.4 Auto Retry 8.4.5 TTY Mode 8.4.6 Voice Privacy 8.4.7 Data Settings 8.4.8 DTMF Tones Phone Settings 8.5.1 Airplane Mode 8.5.2 Language 8.5.3 Security 8.5.3.1 8.5.3.2 8.5.3.3 8.5.3.4 8.5.3.5 Lock Phone Change Lock Emergency # 8.5.3.3.1 911 8.5.3.3.2 Empty 8.5.3.3.3 Empty Reset Phone Erase All Entry 8.5.4 NAM Selection 8.5.5 System Select 8.5.6 Clock Set 8.5.6.1 8.5.6.
Menu Outline 8.6 Section 4 9 8.5.8 PC Connection Memory Info 8.6.1 Memory Usage 8.6.2 My Images 8.6.3 My Ringtones 8.6.4 My Sounds Phone Info 9.1 9.2 9.
Section 4
Section 5: Entering Text Topics Covered • Text Entry Modes • Changing the Text Entry Mode • Entering Text in Alpha (Abc) Mode Section 5 • Entering Text in T9 Word Mode • Entering Upper and Lower Case Letters • Entering Numbers • Entering Symbols This section outlines how to select the desired text input mode when entering characters into your phone. This section also describes how to use the T9 predictive text entry system to reduce the amount of key strokes associated with entering text.
Text Entry Modes You can compose text messages using alphabetical characters, symbols, and numbers. Each method of character entry (symbol, number, and so on) is called a text entry mode. There are four text entry modes, as indicated: • Alpha—Alphabetical text entry mode. Options are: 䢇 䢇 Section 5 䢇 ABC — All upper case Abc — Initial capital abc — All lower case • Symbols — Symbol entry mode. Enter symbols into your message by pressing the corresponding number that appears above it in the display.
Entering Text in Alpha (Abc) Mode Abc is highlighted. Use the Up and Down navigation keys to choose any of the other four text entry modes. Each of the text entry modes are explained in greater detail in “Section 7: Messaging” on page 97. Entering Text in Alpha (Abc) Mode 1. Enter characters while in Alpha (Abc) mode by pressing the key with the desired characters (such as, pressing 4 once for “G”). ghi 2.
2. When you have completed pressing all the keys for the desired word, review the word displayed in your text. 3. If the word is not the one you meant to enter, press the 0 key to show the next word that matches the sequence of keys that you pressed. For example, when you press the key sequence 2 3 , the word “and” appears on the screen. 6 Suppose the word you want is “cod”. Just press the 0 key until “cod” appears in the display.
Entering Upper and Lower Case Letters Entering Upper and Lower Case Letters In Abc and T9 Word modes, you can select to enter only upper case letters (ABC/T9 WORD), only lower case letters (abc/T9 word), or a mix of the two (Abc/T9 Word). 1. While in T9 Word or Abc mode, repeatedly press the key to change the capitalization setting. The left soft key label changes to indicate the current capitalization setting.
Entering Symbols Symbol mode enables you to enter symbols such as @ or % in a text message. 1. In standby mode, press the Message (right) soft key ( ), then press 1 (for Send Message) and 1 for Text Message to compose a new text message. @ @ )) )) 2. Enter the phone number of the recipient, then press the key. OK Section 5 3. Press the Abc (left) soft key ( ). A pop-up menu containing the following options appears in the display: 䢇 䢇 䢇 䢇 䢇 T9 Word Abc ABC 123 Symbols 4. Abc is highlighted.
Section 6: Understanding Your Contacts Topics Covered • Your Contacts List • Adding a New Contacts Entry • Finding a Contacts Entry • Editing an Existing Contact Entry • Renaming a Contacts Group • Deleting a Contacts Entry • Memory Info Section 6: Understanding Your Contacts Section 6 This section explains how to manage your daily contacts by storing their name and number in your Contacts. Contacts entries can be sorted by name, entry, or group.
Your Contacts List Your Contacts list can store up to 500 numbers, with each contact having up to five associated phone numbers, an email address, and a picture ID. Each phone number can be up to 32 digits in length, including hard pauses. Contact names can be up to 32 characters in length. You can also specify a memory location for each entry, and you can restrict access to the Contacts list to prevent unauthorized use.
Adding a New Contacts Entry Adding a New Contacts Entry You can add an entirely new entry to your Contacts list or add information to an existing entry. Using the Contacts Add Option 1. In standby mode, press the Menu (left) soft key ( ), then press 5 (for Contacts) and 2 for Add New Entry. The Add New Entry screen appears in the display with the Name field highlighted. jkl abc 2. Enter a name or phrase to associate with the type using the keypad.
Note: If the call was incoming and Caller ID information was unavailable, then the Save option is also unavailable. 1. After you press the key to end your call, the call time, length of call, phone number, and name of the other party (if available) appear in the display. END 2. Press the Save (right) soft key ( options appear in the display: 䢇 䢇 ). The following Create New — Lets you create a new Contacts entry.
Adding a New Contacts Entry 7. Press the key to save the entry. OK Storing Number from a Calls Log You can store numbers from the Calls logs to your Contacts. 1. In standby mode, press the Menu (left) soft key ( then press 6 for Calls. ), mno 2. Press the corresponding number on the keypad to view the following Calls logs: 䢇 䢇 䢇 Press Press Press 1@ )) 2 abc 3 def for Outgoing for Incoming for Missed A list of your calls appears in the display. 3.
䢇 Update Existing — Lets you add the number or email address you just entered to an existing Contacts entry. 6. Use the navigation keys to highlight Create New, then press the key. The following (number type) icons appear in the display: OK Mobile 1 Mobile 2 Work Fax Home 7. Use the navigation keys to highlight the number type that matches your new entry and press the key. The Add New Entry/Update Existing information screen appears in the display with the Name field highlighted. OK 8.
Finding a Contacts Entry To look up information for a specific contact: 1. In standby mode, press and hold the VoiceSignal. 0 key to launch “Say a Command” appears in the display and is pronounced through the speaker. 2. Say “Lookup”. VoiceSignal prompts you to “Say the name.” 3. Speak clearly and say the full name of the person you want to call, exactly as it is entered in your contact list. 䢇 䢇 If VoiceSignal recognizes the name you said, the contact information for that name appears in the display.
1. In standby mode, do one of the following: 䢇 䢇 Press the Up navigation key (Contacts Find shortcut). Press the Menu (left) soft key ( ), then press 5 (for Contacts) and 1 for Find. jkl @ )) The FIND screen appears in the display with an alphabetical list of Contacts showing. 2. Enter the first few characters of the name of the contact as it appears in your Contacts list. Example: If you saved a contact name as “Amy Smith”, begin your search for that contact by pressing 2 for “A”.
Finding a Contacts Entry ⳮ ⳮ Send Pic Msg — Lets you send a picture message to the selected contact. Call — Lets you place a call to the highlighted contact. 4. Use the navigation keys to highlight an option, then press the key to enter that option’s sub-menu. OK Group This option lets you find a Contacts list entry with a specific Group name. 1. In standby mode, press the Menu (left) soft key ( ), then press 5 (for Contacts) and 4 for Group. The GROUP LIST appears in the display. jkl ghi 2.
Search by Number This option lets you find a Contacts list entry by one of its phone numbers. 1. In standby mode, enter the first few numbers of the Contacts list entry you wish to find (such as the area code or area code and exchange — for example, 888987). 2. Press the Options (right) soft key ( menu options appear in the display: 䢇 䢇 䢇 䢇 䢇 ). The following Search — Lets you find Contacts list entries by their phone numbers. T pause — Adds a two-second pause.
Editing an Existing Contact Entry Editing an Existing Contact Entry Once stored in the Contacts, an entry can be changed quite easily. 1. Find the desired entry in the Contacts list. (See “Finding a Contacts Entry” on page 84 for more information.) 2. Press the Edit (left) soft key ( ). The Edit Contact screen appears in the display with the contact name highlighted. 3. Use the navigation keys to highlight a number stored in this contact entry. 4. Press CLR to backspace and delete numbers. 5.
• T pause — A two-second pause stops the calling sequence for two seconds and then automatically sends the remaining digits. Tip: You can enter multiple two-second pauses to extend the length of a pause. For example, two consecutive two-second pauses cause a total pause time of four seconds. Note: Keep in mind that pauses count as digits towards the 32-digit maximum. Store Pauses in a New Contacts Entry 1. In standby mode, enter the number you wish to store (such as your bank’s teleservice number). 2.
Editing an Existing Contact Entry Add Pauses to an Existing Contacts Entry 1. Find the desired entry in the Contacts list. (See “Finding a Contacts Entry” on page 84 for more information.) 2. Press the Edit (left) soft key ( ). The Edit Contact screen appears in the display with the contact name highlighted. 3. Use the navigation keys to highlight a number stored in this contact entry. 4.
Assigning Speed Dial Numbers When you add or edit an entry to the Contacts list, you have the option of assigning a Speed Dial number using the Options pop-up menu or of returning to the Contacts menu and using the Speed Dial#s option. You can also change a contact’s Speed Dial number. 1. Find the desired entry in the Contacts list. (See “Finding a Contacts Entry” on page 84 for more information.) 2. Press the Edit (left) soft key ( ).
Editing an Existing Contact Entry 7. Press the key to assign the new Speed Dial number to the selected Contact. You are prompted to confirm the assignment. OK 8. Press the Yes (left) soft key ( ) to assign the selected Speed Dial number. The Edit Contact screen appears in the display. 9. Press the key to save the new Speed Dial number assignment. OK Add a Number or Email Address to an Existing Entry 1. Find the desired entry in the Contacts list.
4. Use the keypad to edit the Email address. (See “Section 5: Entering Text” on page 73 for more information.) 䢇 To insert the @ symbol, do the following: ⳮ Press the abc (left) soft key ( ). A pop-up menu appears in the display with Abc highlighted. ⳮ Use the navigation keys to highlight Symbols, then press the OK key. 2 ⳮ Press the key (@ symbol), and enter the remainder of the email address using the keypad. (See “Section 5: Entering Text” on page 73 for more information.
Deleting a Contacts Entry 䢇 䢇 Family Friends Note: You cannot rename No Group. 2. Use the navigation keys to highlight the group (other than No Group) that you wish to rename, then press the Options (right) soft key ( ). The following options appear in the display: 䢇 䢇 䢇 䢇 䢇 Send TXT Msg — Lets you send a text message to Contacts in the selected Group. Send Pic Msg — Lets you send a picture message to Contacts in the selected Group. Rename — Lets you change the name of the selected Group.
2. Press the Options (right) soft key ( ). A pop-up menu containing the following options appears in the display: 䢇 䢇 䢇 䢇 䢇 New Contact — Lets you add an entry to your Contacts list. Erase — Erases the selected Contact. Send Text Msg — Lets you send a text message to the selected contact. Send Pic Msg — Lets you send a picture message to the selected contact. Call — Calls the highlighted Contact. 3. Use the navigation keys to highlight Erase. 4. Press the erasure. OK key.
Section 7: Messaging Topics Covered • Creating and Sending New Messages • Message Send Options • Receiving New Messages • Voicemail • Message Folders • Erasing Messages • Message Settings This section explains how to create, send, receive, and view different types of messages. This section also describes the features and functionality associated with messaging.
Creating and Sending New Messages This section guides you through procedures for creating and sending text messages and picture messages. Creating and Sending a Text Message 1. In standby mode, press the Message (right) soft key ( ), then press 1 (for Send Message) and 1 for Text Message. The Create Text Msg screen appears in the display showing the Send To list. @ )) @ )) Tip: You can also access Messages by pressing the Menu (left) soft key ( ), and then press 1 for Messages. @ )) 2.
Creating and Sending New Messages 䢇 To enter recipient email address(es), press and hold the key to change the text entry mode from 123 to T9 word or abc. (See “Add a Number or Email Address to an Existing Entry” on page 93 for more information.) 3. When you are finished addressing your message, press the key. The Text field appears in the display. OK 4. Enter the text for your message using the keypad. (See “Section 5: Entering Text” on page 73 for more information.
Creating and Sending a Picture Message 1. In standby mode, press the Message (right) soft key ( ), then press 1 (for Send Message) and 2 for Picture Message. The Create Pic Msg screen appears in the display with the Send To field highlighted. @ )) abc Tip: You can also access Messages by pressing the Menu (left) soft key ( ), and then press 1 for Messages. @ )) 2. Address your message by selecting contacts and/or entering number(s) or email address(es) of message recipient(s).
Creating and Sending New Messages 7. To set message send options, press the Options (right) soft key ( ). (See “Message Send Options” on page 102 for more information.) 8. To add a picture to the message, use the navigation keys to highlight the PIC field. 䢇 䢇 Press the Images (left) soft key ( ) to access the picture gallery. If there are no pictures in the gallery, press the Camera (left) soft key ( ) to launch the camera, then take a picture.
䢇 䢇 䢇 Wait for the beep, then start speaking. As it is recording the phone displays a countdown timer that shows the seconds remaining for the recording. ⳮ To pause the memo, press the Pause (left) soft key ( ). When a memo is paused, press the Resume (left) soft key ( ) to continue recording. Press the SAVE ( OK ) key to stop recording. The Record New option and a list of sound files appear in the display with the Record New option highlighted.
Message Send Options 䢇 䢇 䢇 䢇 䢇 䢇 䢇 䢇 䢇 䢇 䢇 Add — Lets you add Graphics, Animation, Sound, or Quick Text to a Text message. Add Quick Text — Lets you add Quick Text to a Picture message. Edit Text Format — Lets you select text Size, Alignment, Color, Style, and Background in a Text message. Save As Draft — Saves this message in the Drafts folder. Priority Level — Lets you assign a High or Normal priority to the message.
Receiving New Messages When you receive a message in standby mode, an alert sounds (unless turned off) and a New Message notification appears in the display along with the closed envelope icon ( ). The date and time of the message and the following options also appear in the display: • View Now — Opens the message where you have the option to Reply, Forward, Erase, Save Text, Save Msg, Save Contact, Lock/Unlock, Save Media, or Block sender.
Voicemail Voicemail Voicemail allows callers to leave voice messages in your voice mailbox, and lets you review, play, and delete your voice messages any time you are in your Carrier’s network coverage area. Voice Mail Setup Before callers can leave voice mail messages, you must first set up your account. See “Setting Up Your Voice Mail” on page 15 and General Message Settings for more information. Checking your Voicemail 1.
2. Use the navigation keys to highlight a message, then do one of the following: 䢇 䢇 䢇 Section 7 䢇 Press the Erase (left) soft key ( ) to delete the message. Press the OPEN ( OK ) key to view the highlighted message, then proceed to Step 3. Press the Options (right) soft key ( ). The following options appear in the display: ⳮ Reply — Lets you reply to a message. ⳮ Reply With Copy — Text Message only — Lets you reply to a message and include a copy of the original message.
Message Folders 䢇 䢇 䢇 Press the REPLY ( OK ) key to compose and send a message to the sender of the highlighted message. Press the Options (right) soft key ( ), The following options appear in the display: ⳮ Play Again — Picture Messages only — Replay a sound file included with a message. ⳮ Forward — Lets you forward the message to other Email addresses or mobile phone numbers. ⳮ Reply With Copy — Text Message only — Lets you reply to a message and include a copy of the original message.
Outbox Your phone stores outgoing messages in the Outbox, regardless of whether the message was successfully sent to, or received by, the addressee. Tip: Verify whether and when a message or email was successfully received by enabling the Delivery Ack message send option. (See “Message Send Options” on page 102 for more information.) 1. In standby mode, press the Message (right) soft key ( ), then press 3 for Outbox. A list of your outgoing messages appears in the display. def 2.
Message Folders 3. While viewing a selected message, do one of the following: 䢇 䢇 䢇 䢇 Press the Erase (left) soft key ( ) to delete the message. Press the RESEND ( OK ) key to resend a message to the original addressee. Press the Options (right) soft key ( ), The following options appear in the display: ⳮ Play Again — Picture Messages only — Replay a sound file included with a message. ⳮ Forward — Send the message to another addressee. ⳮ Erase — Picture Messages only — Delete the message.
1. In standby mode, press the Message (right) soft key ( ), then press 4 for Drafts. A list of your draft messages appears in the display. ghi 2. Use the navigation keys to highlight the message that you wish to edit, then do one of the following: 䢇 䢇 Section 7 䢇 䢇 110 Press the Erase (left) soft key ( ) to delete the message.
Message Folders 3. In the Text screen/field, do one of the following: 䢇 䢇 䢇 Press the Abc (left) soft key ( ). The following options appear in the display: ⳮ T9 Word — Predictive, single key press per letter text entry mode. ⳮ Abc — Alphabetical, multiple key press text entry mode. The first letter is capitalized. ⳮ ABC — Alphabetical, multiple key press text entry mode. All letters are capitalized. ⳮ 123 — Enter numbers by pressing the corresponding key on the keypad.
Voicemail New voice messages in your voice mailbox are logged in the Voicemail folder of the Messages menu. Open the Voicemail folder to view the Callback # (if available), Urgency, and other details of new voicemail messages. 1. In standby mode, press the Message (right) soft key ( ), then press 5 for Voicemail. A Voicemail status screen indicating the number of new messages in your voice mailbox, their urgency, and any callback numbers appears in the display. jkl 2.
Message Settings 䢇 䢇 Drafts — Lets you delete all draft messages from the Drafts folder. All Messages — Lets you delete all messages from all message folders. 2. Use the navigation keys to highlight the folder containing the messages that you wish to delete. 3. Press the key to select the highlighted folder. You are prompted to confirm the erasure of all messages in the folder. OK 4.
General Message Settings 1. In standby mode, press the Message (right) soft key ( ), then press 7 (for Msg Settings) and 1 for General. The following general message options appear in the display: @ )) pqrs 䢇 䢇 䢇 䢇 䢇 䢇 䢇 䢇 Auto Save — Lets you set whether to automatically save to the Drafts folder, to discard, or to prompt you to save unsent messages when you exit them. Auto Erase — Automatically erase first message received after memory is full.
Message Settings Text Message Settings 1. In standby mode, press the Message (right) soft key ( ), then press 7 (for Msg Settings) and 2 for Text Message. The following Text message options appear in the display: abc pqrs 䢇 䢇 䢇 Auto View — Automatically view messages as they are received. Signature — Lets you disable, enable, and update the text signature that can be inserted in outgoing text messages. (Overrides the General > Signature setting.
2. Use the navigation keys to highlight the desired submenu. 3. Press the key to enter the sub-menu and change the selected message settings.
Section 8: Axcess Shop Section 8 Topics Covered • Finding Applications • Managing Applications This section explains the Axcess Shop features where users can download multimedia, applications, games, and check news and sports.
Section 8 Finding Applications With Axcess Shop, you can download full featured applications over the air including games, personalized ring tones, pictures, and more. Send and receive instant messages, or browse the web to catch up on all the latest news. 1. In standby mode, press the Right navigation key to launch Axcess Shop. The Axcess Shop menu appears in the display with the Axcess Shop icon ( ) highlighted. 2. Press the key.
Managing Applications Managing Applications 1. In standby mode, press the Right navigation key to launch Axcess Shop. The Axcess Shop menu appears in the display with the Axcess Shop icon ( ), highlighted. 2. Use the navigation keys to highlight the Manage Apps icon ( ), then press . The Manage Apps screen appears in the display, listing the apps currently on your phone. OK 3. Use the navigation keys to highlight an application.
Section 8
Section 9: Camera Topics Covered • Taking Pictures • Camera Screen • Saving Pictures Section 9 • Camera Options • Zoom • Brightness • The Photo Gallery • Point, Click, and Send a Photo Use your SCH-U420 phone to take full color digital pictures, display them on your phone’s vivid color display, and instantly share them with family and friends. It’s fun, and as easy to use as a traditional point-and-click camera.
Taking Pictures Taking pictures with the built-in camera is as simple as choosing a subject, pointing the lens [located on the rear of the slide (at the top)], and pressing a button. Note: You cannot use the camera with the phone closed. To use the camera, you must open your phone by moving the slide up. Section 9 Simple Snap Shot To take a single picture using the current camera settings, do the following: 1. In standby mode, press the camera key ( ) on the right side of the phone. The message “Loading..
Camera Screen Camera Screen • Gallery — Pressing the left soft key ( ) opens the My Images multimedia folder so you can view or manage your stored pictures. (See “The Photo Gallery” on page 133 for more information.) • Take — Pressing the OK key takes a picture of the image currently appearing on the display. Pressing the Camera key ( ) on the right side of the phone also takes the picture. • Options — Pressing the right soft key ( ) opens a pop-up menu of camera settings.
White Balance — Indicates camera’s white balance setting. (You can change the camera white balance setting. See “White Balance” on page 128 for more information.) Photo Counter — Indicates the number of photos you can still take. (Depending on the camera resolution setting.) Multi Shot in use — Takes multiple pictures after you press the Camera key ( ) or the OK key. The number of pictures taken depends upon the resolution setting.
Camera Options • Discard the picture by pressing the Erase (right) soft key ( ). Camera Options The Camera Options let you adjust the default camera settings to suite available lighting, the subject of the photo, or the purpose of the photo. Accessing Camera Options 2. Press the Options (right) soft key ( sub-menus appear in the display: 䢇 䢇 䢇 䢇 䢇 䢇 䢇 䢇 ).
Resolution Change the size (in bytes) of your pictures using the Resolution setting. Options are High, Medium, and Low. 1. In camera mode, press the Options (right) soft key ( ). 2. Use the navigation keys to highlight Resolution, and press the key. The following options appear in the display: OK Section 9 䢇 䢇 䢇 High (640 X 480) (pixels) Med (320 X 240) (pixels) Low (160X 120) (pixels) 3. Use the navigation keys to highlight the desired resolution and press the key.
Camera Options 䢇 䢇 䢇 3 seconds 5 seconds 10 seconds 3. Use the navigation keys to highlight the desired delay, then press the key. The camera screen appears in the display. OK The next time you press the Camera key ( ) or the key, a countdown timer appears in the display that indicates the time remaining before the camera takes the picture. A beep tone sounds each of the last five seconds until the picture is taken. OK END key.
Multi Shot Multi Shot lets you take multiple pictures in succession at the touch of a key. The number of pictures you take depends on the Resolution setting, as indicated in the following list: • High resolution — 3 pictures • Medium resolution — 3 pictures • Low resolution — 5 pictures See “Resolution” on page 126 for more information. Section 9 1. In camera mode, press the Options (right) soft key ( ). 2. Use the navigation keys to highlight Multi Shot, then press the key.
Camera Options 2. Use the navigation keys to highlight White Balance, then press the key. The name of the current White Balance setting appears in the second line of the display. The options are: OK 䢇 䢇 䢇 䢇 3. Use the Left and Right navigation keys to show the various White Balances and the effects they have on a picture. 4. When you decide on the White Balance you wish to use, press the key. The camera viewfinder screen appears in the display with your selected White Balance applied.
2. Use the navigation keys to highlight Quality, then press the key. OK 3. Use the navigation keys to highlight Fine, Normal, or Economy. 4. Once the quality setting of your choice is highlighted, press the key. You’re returned to the camera viewfinder screen. OK Section 9 Shutter Sounds Choose from four different sounds whenever you take a picture. Aside from being a cool sound effect, Shutter Sounds acts as an audible reminder that your camera has taken a picture.
Camera Options Color Tones Change the look of your pictures with Color Tones. Choose from five available settings such as Emboss, Negative, and Sepia. The selected color tone previews in the display before you take the picture. 1. In camera mode, press the Options (right) soft key ( ). 2. Use the navigation keys to highlight Color Tones, and press the key. The following options appear in the display: OK Section 9 Note: Choose Normal to disable Color Tones.
Zoom Zoom lets you temporarily enlarge the pictures you take. Increasing the Zoom (X1 – X3) enlarges your pictures (0 is normal). Note: The resolution setting affects zoom capabilities. When resolution is set to High, zoom is not available. When resolution is set to Medium, X1 and X2 are available. When resolution is set to Low, X1, X2, and X3 zoom settings are available. Section 9 1. In standby mode, briefly press the Camera key ( ). The camera viewfinder screen appears in the display. 2.
The Photo Gallery The Photo Gallery Saved pictures are stored in the My Images folder. You can browse the pictures one at a time (expanded mode), or view several pictures at once in thumbnail format. 1. In standby mode, briefly press the Camera key ( ). The Camera viewfinder screen appears in the display. 2. Press the Gallery (left) soft key ( ). Any pictures that you’ve saved appear in the display. 4. Press the Options (right) soft key ( ) while viewing pictures in the Gallery.
䢇 Photo Info — View the Title, time and date created, size, and resolution of the currently highlighted or displayed picture. 5. Use the navigation keys to highlight the desired option. Press the key to perform the function for the option or enter its sub menu. OK Switch From Expanded to Thumbnail Mode 1. Use the navigation keys to highlight a picture that you wish to view full size, press the key. OK Section 9 2. Press the photos.
Section 10: Axcess Web Topics Covered • Axcess Web • Launching Axcess Web • Using Axcess Web • Using Links • How Axcess Web Keys Work Section 10: Axcess Web 135 Section 10 This section outlines how to launch Axcess Web, how to navigate to other pages on the web, and how the keys on the keypad are used with the web application. Additionally, links to other sites are briefly discussed.
Axcess Web With Axcess Web, you can conveniently surf the web and download ringtones and wallpapers using your phone. Each time you launch Axcess Web, your phone connects to the Internet and the service indicator icon ( ) appears in the display. Stored Web Content Section 10 Axcess Web ends an Internet connection after a certain period of inactivity, however some information from your session remains stored in the phone (if you leave your phone turned on).
Using Axcess Web Exit Axcess Web 䡵 Press END to exit Axcess Web. Using Axcess Web When you use Axcess Web, some of the keys operate differently than during a normal phone call. Axcess Web presents on-screen items in any of the following ways: • Text or numeric input. • Links (embedded in content). • Numbered options (some may not be numbered). • Simple text. You can act upon options or links by using the soft keys.
You can normally use the left soft key ( link when it is highlighted. ) to select a How Axcess Web Keys Work The following table lists Axcess Web keys and their functions. navigation keys — Use to browse lists and options OK CLR CLR Key — A browse, back-up key. Press once to back up one page. Press and hold to go back to home page. Press to clear the last number, letter, or symbol entered. Press and hold to completely clear the display.
Section 11: Multimedia Topics Covered • Accessing Multimedia • My Images • My Ringtones • My Sounds • Shuffle This section outlines your phone’s multimedia functions and key features associated with multimedia.
Accessing Multimedia 1. In standby mode, press the Menu (left) soft key ( then press, 3 for Multimedia. The following Multimedia sub-menus appear in the display: ), def 䢇 䢇 䢇 䢇 䢇 Camera — Lets you launch and set up your phone’s camera. (See “Section 9: Camera” on page 121 for more information.) My Images — Lets you choose the multi-media or pictures that appear in your phone’s display. My Ringtones — Lets you assign melody tones for calls, alarms, and other alerts.
My Images Tip: You can also access My Images from: - The Camera screen by pressing the Gallery (left) soft key ( ) - The Edit Contact screen by selecting the picture ID field and pressing the Set (left) soft key ( ) 2. Use the navigation keys to highlight a picture. Press the the screen. OK key to expand the selected picture to fill 3. Press the Options (right) soft key ( ).
My Ringtones My Ringtones lets you assign ringtones (preloaded and downloaded) for calls, alerts, and as distinctive ringers for Contacts. 1. In standby mode, press the Menu (left) soft key ( ), then press, 3 (for Multimedia) and 3 for My Ringtones. A list of ringtones appears in the display.
My Sounds 4. When using a downloaded ringtone, press the Options (right) soft key ( ) and the following options appear in the display: 䢇 䢇 䢇 䢇 Lock / Unlock — Lets you prevent/permit file deletion Erase — Erases the selected file Rename — Lets you rename the selected file Ringtone Info — Displays information about the selected file, such as the file name, the file type, and the data size Use the navigation keys to highlight an option, then press the key. OK 5.
2. Use the navigation keys to highlight the Record New option, then press the key to record a voice memo. (See “Voice Memo” on page 62 for more information.) OK 3. Press the Options (right) soft key ( 䢇 Section 11 䢇 䢇 144 ). For a recorded sound file, a pop-up menu containing the following options appears in the display: ⳮ Send — Lets you send the selected sound file to a specified recipient in a Picture message.
Shuffle ⳮ ⳮ ⳮ ⳮ ⳮ Set As — Lets you assign the selected sound file as the Ringtone or as the Contact ID for a Contact or an Alert Tone for Text, Picture, or Voicemail messages. Rename — Lets you rename the sound file. Lock / Unlock — Lets you protect the sound file from being deleted. Erase All — Erases all sound files. Sound Info — Displays information about the sound file, such as the file name, file type, and the data size. Use the navigation keys to highlight an option and press the key. OK 4.
2. To select images for the Image Shuffle, do the following: 䢇 䢇 䢇 䢇 Press the Add (left) soft key ( ). The following options appear in the display: ⳮ My Images ⳮ Preset Images Use the navigation keys to highlight either option, then press the OK key. A list of image files appears in the display. Use the navigation keys to highlight a picture, then press the OK key. A check mark appears in the check box for the selected picture. Repeat this step for each picture to be included in the Image Shuffle.
Shuffle Melody Shuffle 1. In standby mode, press the Menu (left) soft key ( ), then press, 3 (for Multimedia) and 5 for Shuffle. The following options appear in the display: def 䢇 䢇 jkl Image Shuffle — When set to On, presents a random slide show of a set of specified pictures as Wallpaper in standby mode. Melody Shuffle — When set to On, plays one of a set of specified ringtones and/or sound files, selected randomly, as the ringer for incoming calls.
䢇 The Melody Shuffle screen appears in the display showing a list of the selected sound files. Press the CLR key. You are returned to the Shuffle screen. 3. To activate the Melody Shuffle, use the navigation keys to highlight the Melody Shuffle option, then press the Set As (left) soft key ( ). The following options appear in the display: 䢇 䢇 On Off Use the navigation keys to highlight the On option and press the key.
Section 12: Tools Section 12 Topics Covered • Tools Menu • Voice Service • Bluetooth • Calendar • Memo Pad • Alarm Clock • World Time • Calculator • Stop Watch • Converter • Tip Calculator This section explains how to use your phone’s digital assistant functionality to schedule events, set reminders, create a “to do” list, perform calculations, and more.
Section 12 Tools Menu Tools is a suite of Personal Digital Assistant (PDA) applications such as a Calendar, To Do List, and Memo Pad that run on your phone. You can use your phone to schedule events, set reminders, create a to do list, perform calculations, and more with the functions provided by this useful feature. Opening Tools Menu 1. In standby mode, press the Menu (left) soft key ( ), then press 7 for Tools.
Voice Service The following sections provide detailed descriptions of the applications and how to use their functions. Section 12 Voice Service VoiceSignal is state-of-the-art voice recognition software for your mobile phone that lets you dial numbers, lookup contact information, and open applications using your voice. To access your phone’s voice settings, do the following: 1. In standby mode, press the Menu (left) soft key ( ), then press 7 (for Tools), and 1 for Voice Service.
Section 12 Note: You can also set your phone to start VoiceSignal when you open the phone. See “Voice Launch” on page 157 for more information. VoiceSignal includes the following commands: • Call — Lets you dial the phone by saying any name stored in your contact list, without ever having to record, or “train” that name. VoiceSignal automatically voice-activates all your contacts, even if you have hundreds of them stored on your phone.
Voice Service Voice Command Tips: phone. Voice-Activating Your Contacts List When you first start VoiceSignal, it reads your Contacts list and voice-activates all the names stored there. When you have add or change contacts, VoiceSignal automatically reloads and voice-activates the entire list. Ending Calls Before Restarting the VoiceSignal Software When you use VoiceSignal to make a call, you must end that call before you can use VoiceSignal again.
To change the way VoiceSignal uses choice lists: Section 12 1. In standby mode, press the Menu (left) soft key ( ), then press 7 (for Tools), and 1 (for Voice Service), 2 (for Voice Settings), and 1 for Choice Lists the following options appear in the display: pqrs abc @ )) @ )) Automatic—VoiceSignal displays a choice list only when it is not sure if it has correctly recognized the name or number. Always On—VoiceSignal always displays a choice list, even when there is only one choice.
Voice Service Adaptation involves recording several sequences of four digits each. The recording process takes about a minute. Tips for Adapting Digit Dialing • Use Adapt Digits in a quiet place. • Make sure you wait for the beep before starting to speak. • Speak clearly, and say each digit distinctly. • If you make a mistake while recording a sequence of digits, or if there is an unexpected noise that spoils the recording, rerecord that sequence.
Section 12 3. Wait for the beep and say the digits using your normal tone of voice. After a moment, the phone plays back the recording and prompts “Did the recording sound ok?” 䢇 䢇 If the recording was good, say “Yes.” If you need to re-record, say “No.” If you say “No,” the phone prompts you to pronounce the digits again. Wait for the beep and then say the digits. Repeat this step until you’re satisfied with the recording. 4.
Voice Service 3. Use the navigation keys to select Yes to reset your digit adaptation, or No to cancel. OK key to save and exit. Sound Sound lets you specify what (if any) text prompts you want your phone to read to you through the earpiece. 1. In standby mode, press the Menu (left) soft key ( ), then press 7 (for Tools), and 1 (for Voice Service), 2 (for Voice Settings), and 4 for Sound.
Section 12 䢇 Key/Ear Mic — Attach a headset to your phone. Press and hold 0 to activate VoiceSignal. Now, you can make and end calls using VoiceSignal by pushing the button on the headset. 2. Use the navigation keys to highlight the option you want, then press the key to save and exit. OK About VoiceSignal This option causes the About VoiceSignal screen to appear in the display, showing version and build information about the VoiceSignal software included on your phone. 1.
Bluetooth Turn Bluetooth On/Off When the Bluetooth is turned on, you can use the Bluetooth features available. When the Bluetooth is turned off, you cannot send or receive information via Bluetooth. To save battery life or in situations where Bluetooth use is prohibited, such as airline traveling, you can turn off the Bluetooth wireless technology headset. Add New Device To search for available Bluetooth device(s:, 1.
4. Press the key. Names of the available devices appears in the display. OK Section 12 5. Use the navigation keys to highlight the device you want to pair with your phone. 6. Press the PAIR ( ) key to pair the selected device with the phone. You are prompted to enter the passkey or PIN for the selected device. OK 7. Enter the device passkey or PIN and press the OK key. Registered List This menu provides a list of Bluetooth wireless technology devices discovered by your handset. 1.
Calendar Discovery Mode Device Name Shows the handset name. You may change this name enter the text and press the key. OK Device Info Shows the Bluetooth Type, Status, and Address of your phone. Calendar Calendar lets you view the current, past, or future month in a monthly calendar layout. While viewing the calendar, the current date is highlighted and days with scheduled events are surrounded by a box. View an event 1.
䢇 Section 12 䢇 䢇 䢇 䢇 Press the OK key to open the highlighted date. Press the volume up key ( ) to view previous months. Press the volume down key ( ) to view future months. Press the Options (right) soft key ( ) while viewing the calendar. The following options appear in the display: ⳮ Go to Date — Lets you jump to any date you specify. ⳮ Go to Today — Lets you jump to any date you specify. ⳮ Erase Old — Lets you erase past events. ⳮ Erase all — Lets you erase all events.
Memo Pad 6. Use the Left and Right navigation keys to change between AM and PM. 7. When you’re finished entering the dates and times, use the Up and Down navigation keys to highlight the Alert field. Use the Left and Right navigation keys to select a type of alert. 8. Use the Up and Down navigation keys to highlight the Reminder field. Use the Left and Right navigation keys to select the Reminder off or to select a reminder interval. 9. Use the Up and Down navigation keys to highlight the Alert time field.
Add a Memo Section 12 1. In standby mode, press the Menu (left) soft key ( ), then press 7 (for Tools) and 4 for Memo Pad. pqrs ghi 2. If you have any stored memos, they appear as a list in the display. If this is your first time in Memo Pad, “No memos” appears in the display. Press the Add (left) soft key ( ) to add a new memo. 3. Enter a memo using the keypad. (See “Section 5: Entering Text” on page 73 for more information.) 4. When you’re finished entering details for the memo, press the key.
Alarm Clock Alarm Clock Note: The alarm doesn’t function when the phone is turned off. If the time for an alarm that was set for Once has elapsed and the phone is off, the alarm occurs at the same time on the following day. 1. In standby mode, press the Menu (left) soft key ( ), then press 7 (for Tools) and 5 for Alarm Clock. The following options appear in the display: pqrs 䢇 䢇 䢇 jkl Alarm 1 Alarm 2 Alarm 3 2. Use the navigation keys to highlight an Alarm selection, then press the key.
Section 12 When an Alarm Sounds An animated alarm clock appears in the display with the options Snooze or Dismiss, and an alert sounds when the specified time for the alarm arrives. 䡵 Use the navigation keys to highlight Dismiss, then press the key to silence the alarm. OK 䢇 䢇 䢇 䢇 If the alarm was set as a Daily alarm, the alarm icon remains in the top of the display. If the alarm was set as a Mon.-Fri., the alarm icon remains in the top of the display.
World Time World Time 1. In standby mode, press the Menu (left) soft key ( ), then press 7 (for Tools) and 6 for World Time. A world map appears in the display. mno pqrs 2. Use the Left and Right navigation keys to display the time zone and city that you wish to view. The following time zones/cities are supported: EST/EDT: Detroit Washington D.
Section 12 3. Press the Options (right) soft key ( ) select to display (DST On) or not display (DST Off) Daylight Savings Time (DST) for the selected time zone. 4. Do one of the following: 䢇 䢇 Press the OK key to set the selected time zone as the home time zone for your phone. Press the CLR key to return to the Tools menu. Calculator You can perform calculations, including addition, subtraction, multiplication, and division using your phone. 1.
Stop Watch 4. Use the keypad to enter the second number into your equation. OK key to perform the calculation and view Stop Watch You can use this menu to set a stop watch. 1. In standby mode, press the Menu (left) soft key ( ), then press 7 (for Tools), and 8 for Stop Watch. pqrs tuv 2. Press the key to start, stop, and resume the stopwatch count. OK 3. Press the Record (left) soft key ( ) at the start of each succeeding event/lap to record the completion time for the previous event/lap. 4.
To convert a currency, length, weight, volume, area, or temperature, do the following: Section 12 1. In standby mode, press the Menu (left) soft key ( ), then press 7 (for Tools), and 8 for Converter. pqrs tuv 2. Use the navigation keys to highlight the conversion feature you wish to use, then press the key. OK 3. Use the navigation keys to select the units to be converted From and To. 4. Enter the quantity you want converted in the From field. The converted quantity appears in the To field.
Converter 6. Press the key to save the changed exchange rate. CLR key to return to the Currency Converter Currency — Adding Exchange Rates You can use the Currency Converter to convert from and to obscure currencies by adding exchange rates for these currencies. To add a currency and its exchange rate to the Currency Converter, do the following: 1. In standby mode, press the Menu (left) soft key ( ), then press 7 (for Tools), 9 (for Converter), and 1 for Currency. pqrs wxyz @ )) 2.
Section 12 Notes: Press the key to enter the decimal point. The Exchange Rate field only accepts two digits after the decimal point. 9. Press the OK key to save the new exchange rate. Currency — Erasing Exchange Rates You cannot erase the preloaded currencies from the Exchange Rate list. You can erase a currency that you have added to the list by doing the following: 1. In standby mode, press the Menu (left) soft key ( ), then press 7 (for Tools), 9 (for Converter), and 1 for Currency.
Tip Calculator Tip Calculator • Gratuity (tip) • Individual payment (for groups) Calculations are based on the total amount of the check, a selected percentage, and the number of people paying. 1. In standby mode, press the Menu (left) soft key ( then press 7 (for Tools). ), pqrs 2. Use the navigator keys to highlight Tip Calculator, then press the key. The Bill field is highlighted. OK 3. Use the keypad to enter the total amount of the bill. 4.
Section 12
Section 13: Changing Your Settings Topics Covered • Location • Display Settings • Sound Settings Section 13 • Call Settings • Phone Settings • Memory Info This section explains how to customize your phone to suit your needs and preferences.
Location This function identifies your location to the network via the Global Positioning System (GPS). You can set this function for continuous operation or to operate only in the event that you dial 911. Note: Contact your Wireless Provider to determine whether, when, or where location-based services are available. 1. In standby mode, press the Menu (left) soft key ( ), then press 8 (for Settings), and 1 for Location.
Display Settings 䢇 䢇 䢇 䢇 䢇 2. Use the navigation keys to highlight a sub-menu. 3. Press the key to enter the highlighted sub-menu. The following sections describe the above listed display sub-menus in greater detail. OK Menu Style Menu Style allows you to choose how main menus appear in your display. 1. In idle mode, press the Menu (left) soft key ( ), then press 8 (for Settings), 2 (for Display Settings), and 1 for Menu Style.
Wallpapers Wallpapers lets you choose the pictures that appear in your phone’s display while in standby mode. 1. In standby mode, press the Menu (left) soft key ( ), then press 8 (for Settings), 2 (for Display Settings), and 2 for Wallpapers. The following submenus appear in the display: abc tuv abc 䢇 Section 13 䢇 䢇 My Images — Choose a picture to appear in the display when the phone is in standby mode. Preset Images — Choose a preset image to appear in the display when the phone is in standby mode.
Display Settings Clock Format Clock Format lets you choose whether to show the time in the display in digital or analog format. 1. In standby mode, press the Menu (left) soft key ( ), then press 8 (for Settings), 2 (for Display Settings), and 3 for Clock Format. The following options appear in the display: abc tuv def 䢇 䢇 2. Use the navigation keys to highlight the desired setting, then press the key to save the setting.
1. In standby mode, press the Menu (left) soft key ( ), then press 8 (for Settings), 2 (for Display Settings), and 5 for Dialing Font. The following options appear in the display: abc tuv jkl 䢇 䢇 Style — Sets font (Normal, Quill Pen, Sticky, or Color Dial) used to show dialed numbers. Size — Sets size (Normal or Large) of the font used to show dialed numbers. 2. Use the navigation keys to highlight the desired option and setting, then press the key to save the setting.
Sound Settings Note: Prolonged backlight use drains your battery faster. 1. In standby mode, press the Menu (left) soft key ( ), then press 8 (for Settings), 2 (for Display Settings), and 7 for Backlight. The following submenus appear in the display: abc tuv pqrs 䢇 䢇 2. Use the navigation keys to highlight an option. 3. Press the key to enter the highlighted option’s submenu and to save changed settings as desired.
1. In standby mode, press the Menu (left) soft key ( ), then press 8 (for Settings), 3 (for Sound Settings), and 1 for Volume. The following options appear in the display: def tuv @ 䢇 䢇 䢇 Section 13 䢇 )) Voice Calls — Lets you set the volume and/or vibration for the incoming calls ringer. Messages — Lets you set the volume and/or vibration for the incoming messages ringer. Alarms — Lets you set the volume and/or vibration for the alarm ringer.
Sound Settings Note: You can also access the Ringer Type sub-menu by pressing Menu, 8 , 3 , 2 . def tuv abc 2. Use the navigation keys to highlight the desired submenu, then press the key. OK 䢇 3. Use the navigation keys to highlight an option. 4. Press the key to enter the highlighted option’s submenu and to save changed settings as desired. OK Alerts You can set your phone to sound an alert whenever you enter or leave your service area, connect or disconnect a call, as well as other options. 1.
䢇 Power On/Off — Plays a melody when turn the phone on or off. 2. Use the navigation keys to highlight a sub-menu, then press the key. OK 3. Use the Up and Down navigation keys to highlight On or Off. 4. Press the OK key to confirm your selection. Section 13 Call Settings Restriction Restriction lets you restrict the use of your phone for outgoing calls, incoming calls, and calls placed from your Contacts. 1.
Call Settings • Open the slide 1. In standby mode, press the Menu (left) soft key ( ), then press 8 (for Settings), 4 (for Call Settings), and 2 for Call Answer. The Call Answer sub-menu with the following options appears in the display: ghi tuv abc 䢇 䢇 䢇 Any Key — Press any key except the , , or left soft key ( ) to answer an incoming call. Send Key — Press to answer an incoming call. Slide Up — Open the slide to answer an incoming call. END SEND 2.
2. Use the navigation keys to highlight the desired setting, then press the key. OK Auto Retry Auto Retry automatically re-dials a number if the connection fails. Depending upon your location, the number of times your phone automatically dials the number may vary. 1. In standby mode, press the Menu (left) soft key ( ), then press 8 (for Settings), 4 (for Call Settings), and 4 for Auto Retry.
Call Settings Note: The “Enabling TTY may impair headset use and non-TTY accessory performance” message pops up when you select TTY Mode. 2. Press the Yes (left) soft key ( ) to access the TTY Mode options or press the No (right) soft key ( ) to return to the Call Settings sub-menu. 3.
2. Use the Up and Down navigation keys to highlight the Voice Privacy option of your choice, then press . Your settings are saved. OK Data Settings Use the Data Settings menu to configure data connection settings. 1. In standby mode, press the Menu (left) soft key ( ), then press 8 (for Settings), 4 (for Call Settings), and 7 for Data Settings. tuv ghi pqrs Section 13 2. The following options appear in the display: 䢇 䢇 䢇 Data Off — No incoming data calls accepted.
Phone Settings Phone Settings Airplane Mode When set to On, Airplane Mode disables all radio functions of your phone. This prevents you from making or receiving calls, but allows you to use other features (such as the camera and the Tools) safely in sensitive environments, such as on board an aircraft. 1. In standby mode, press the Menu (left) soft key ( ), then press 8 (for Settings), 5 (for Phone Settings), and 1 for Airplane Mode.
Security Use the Security menu to lock your phone, set up emergency numbers, enable or disable voice privacy, set restrictions, as well as other security options. Section 13 Lock Phone Locking the phone limits all outgoing calls except calls to 911 emergency and the three user-programmable emergency numbers. You can lock the phone manually during use, or set the phone to lock automatically when it is turned on.
Phone Settings 4. Press the key to perform the function for the highlighted option. OK Change Lock The default lock code for your phone is generally the last four digits of your phone number. It is advisable to change the default lock code to a secret code for security purposes. 1. In standby mode, press the Menu (left) soft key ( ), then press 8 (for Settings), 5 (for Phone Settings), and 3 for Security. You’re prompted to enter the lock code. jkl tuv def 2. Press 2 for Change Lock.
Note: Emergency number 911 is hard-coded into your phone. You can dial this number any time, even when the phone is locked or restricted. If you call 911 an audible tone is heard and an Emergency prompt appears in the display for the duration of the call. Section 13 Important: Because of various transmission methods, network parameters, and user settings necessary to complete a call from your wireless phone, a connection cannot always be guaranteed.
Phone Settings 1. In standby mode, enter the emergency number. 2. Press the SEND key to place the call. Resetting Your Phone Reset Phone returns all setup options to their factory default. 1. In standby mode, press the Menu (left) soft key ( ), then press 8 (for Settings), 5 (for Phone Settings), and 3 for Security. You’re prompted to enter the lock code. jkl tuv def 2. Enter the lock code, the press 4 for Reset Phone.
2. Enter the lock code, then press 5 for Erase All Entry. You are prompted to enter the lock code a second time. jkl Note: The default lock code is the last four digits of your telephone number. 3. You are prompted to confirm erasure of all entries. 4. Press the Yes (left) soft key ( press the No (right) soft key ( Security sub-menu. ) to erase all entries or ) to return to the Section 13 NAM Selection The Network menu allows you to select NAM (Number Assignment Module) settings for your phone.
Phone Settings roaming options appear in the display: 䢇 䢇 䢇 Home only — Your phone is available for normal operation only within your designated coverage area. Automatic-A — The Preferred Roaming List (PRL) is used to acquire service. If no preferred systems are found, any digital “A” system is acquired. Automatic-B — The PRL is used to acquire service. If no preferred systems are found, any digital “B” system is acquired. OK Clock Set Use the Clock Set option to set the current date and time.
Press OK to save the your time setting. For Set Date, the Set Date screen appears in the display. ⳮ Enter the current date using your keypad. The month and day must be entered using two digits each. The year must be entered using all four digits. ⳮ Press OK to save your date setting. ⳮ 䢇 Quick Search Quick Search is an easy way to locate Menu items and Contacts. Section 13 1. In standby mode, press the Menu (left) soft key ( ), then press 8 (for Settings), 5 (for Phone Settings), and 7 for Quick Search.
Phone Settings 3. Press the item. OK key to access the content of the menu Searching for a Contact 1. In standby mode, press the first few numeric keys that correspond to the letters of the contacts name. For example, to search for “Sally” you would enter: 7pqrs 2 abc 5 jkl 5 jkl 9 wxyz S A L L Y 3. Press the SEND key to call the contact. PC Connection PC Connection allows you to select how you want to connect your phone to your personal computer. 1.
Memory Info Memory Info lets you quickly and easily review and manage your phone memory usage. Memory Usage Memory Usage lets you review your usage of your phone’s memory. 1. In standby mode, press the Menu (left) soft key ( ), then press 8 (for Settings), 6 (for Memory Info), and 1 for Memory Usage.
Memory Info 2. Use the Up and Down navigator keys to highlight a Memory Info sub-menu, then press the key. A list of all files in the related folder appears in the display. OK Files are listed by name, and each file entry shows the name and size of each file. 3. To erase files, do the following: 䢇 䢇 䢇 4. Press the key to return to the My Images / Ringtones / Sounds sub-menu, then press the key to return to the Memory Info sub-menu. Press the key to return to standby mode.
Section 13
Section 14: Phone Info Topics Covered • Phone Number • Icon Glossary • Version This section explains how to identify the hardware and software versions of your phone and to identify the phone number assigned to your phone.
Phone Number This option causes the Phone Number screen to appear in the display and show the ten-digit number assigned to your phone by your Wireless Provider. 1. In idle mode, press the Menu (left) soft key ( ), then press 9 (for Phone Info) and 1 for Phone Number. The phone number assigned by your Wireless Provider appears in the display. wxyz 2. Press OK @ )) to return to the Phone Info menu.
Section 15: Health and Safety Information Topics Covered • Health and Safety Information This section outlines the safety precautions associated with using your phone. These safety precautions should be followed to safely use your phone.
Health and Safety Information Exposure to Radio Frequency (RF) Signals Certification Information (SAR) Section 15 Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the exposure limits for radio frequency (RF) energy set by the Federal Communications Commission (FCC) of the U.S. government.
Health and Safety Information tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output.
this site uses the phone FCC ID number which is usually printed somewhere on the case of the phone. Sometimes it may be necessary to remove the battery pack to find the number. Once you have the FCC ID number for a particular phone, follow the instructions on the website and it should provide values for typical or maximum SAR for a particular phone. Additional product specific SAR information can also be obtained at www.fcc.gov/cgb/sar.
Consumer Information on Wireless Phones Consumer Information on Wireless Phones The U.S. Food and Drug Administration (FDA) has published a series of Questions and Answers for consumers relating to radio frequency (RF) exposure from wireless phones. The FDA publication includes the following information: What kinds of phones are the subject of this update? The term wireless phone refers here to hand-held wireless phones with built-in antennas, often called “cell,” “mobile,” or “PCS” phones.
levels of radio frequency energy (RF) in the microwave range while being used. They also emit very low levels of RF when in the stand-by mode. Whereas high levels of RF can produce health effects (by heating tissue), exposure to low level RF that does not produce heating effects causes no known adverse health effects. Many studies of low level RF exposures have not found any biological effects.
Consumer Information on Wireless Phones • “Design wireless phones in a way that minimizes any RF exposure to the user that is not necessary for device function; and • “Cooperate in providing users of wireless phones with the best possible information on possible effects of wireless phone use on human health. FDA belongs to an interagency working group of the federal agencies that have responsibility for different aspects of RF safety to ensure coordinated efforts at the federal level.
Base stations are thus not the primary subject of the safety questions discussed in this document. What are the results of the research done already? Section 15 The research done thus far has produced conflicting results, and many studies have suffered from flaws in their research methods. Animal experiments investigating the effects of radio frequency energy (RF) exposures characteristic of wireless phones have yielded conflicting results that often cannot be repeated in other laboratories.
Consumer Information on Wireless Phones about long-term exposures, since the average period of phone use in these studies was around three years. What research is needed to decide whether RF exposure from wireless phones poses a health risk? A combination of laboratory studies and epidemiological studies of people actually using wireless phones would provide some of the data that are needed. Lifetime animal exposure studies could be completed in a few years.
FDA has been a leading participant in the World Health Organization international Electromagnetic Fields (EMF) Project since its inception in 1996. An influential result of this work has been the development of a detailed agenda of research needs that has driven the establishment of new research programs around the world. The Project has also helped develop a series of public information documents on EMF issues.
Consumer Information on Wireless Phones • “If you must conduct extended conversations by wireless phone every day, you could place more distance between your body and the source of the RF, since the exposure level drops off dramatically with distance. For example, you could use a headset and carry the wireless phone away from your body or use a wireless phone connected to a remote antenna. Again, the scientific data do not demonstrate that wireless phones are harmful.
Do hands-free kits for wireless phones reduce risks from exposure to RF emissions? Since there are no known risks from exposure to RF emissions from wireless phones, there is no reason to believe that hands-free kits reduce risks. Hands-free kits can be used with wireless phones for convenience and comfort. These systems reduce the absorption of RF energy in the head because the phone, which is the source of the RF emissions, will not be placed against the head.
Consumer Information on Wireless Phones February 2002, the Federal trade Commission (FTC) charged two companies that sold devices that claimed to protect wireless phone users from radiation with making false and unsubstantiated claims. According to FTC, these defendants lacked a reasonable basis to substantiate their claim. What about wireless phone interference with medical equipment? FDA continues to monitor the use of wireless phones for possible interactions with other medical devices.
Should harmful interference be found to occur, FDA will conduct testing to assess the interference and work to resolve the problem. Additional information on the safety of RF exposures from various sources can be obtained from the following organizations: • FCC RF Safety Program: http://www.fcc.gov/oet/rfsafety/ • Environmental Protection Agency (EPA): http://www.epa.gov/radiation/ • Occupational Safety and Health Administration's (OSHA): http://www.osha.gov/SLTC/radiofrequencyradiation/ index.
Road Safety When driving a car, driving is your first responsibility. When using your wireless phone behind the wheel of a car, practice good common sense and remember the following tips: 1. Get to know your wireless phone and its features, such as speed dial and redial. If available, these features help you to place your call without taking your attention off the road. 2. When available, use a hands-free device.
7. Do not engage in stressful or emotional conversations that may be distracting. Make people you are talking with aware you are driving and suspend conversations that have the potential to divert your attention from the road. 8. Use your wireless phone to call for help. Dial 9-1-1 or other local emergency number in the case of fire, traffic accident or medical emergencies. Remember, it is a free call on your wireless phone! 9. Use your wireless phone to help others in emergencies.
Operating Environment Operating Environment Remember to follow any special regulations in force in any area and always switch your phone off whenever it is forbidden to use it, or when it may cause interference or danger. When connecting the phone or any accessory to another device, read its user's guide for detailed safety instructions. Do not connect incompatible products.
These recommendations are consistent with the independent research and recommendations of Wireless Technology Research. Persons with pacemakers: • should always keep the phone more than 15 cm (6 inches) from their pacemaker when the phone is switched on. • should not carry the phone in a breast pocket. • should use the ear opposite the pacemaker to minimize potential interference. If you have any reason to suspect that interference is taking place, switch your phone off immediately.
Using Your Phone Near Other Electronic Devices device is the best way to evaluate it for your personal needs. M-Ratings: Phones rated M3 or M4 meet FCC requirements and are likely to generate less interference to hearing devices than phones that are not labeled. M4 is the better/higher of the two ratings. T-Ratings: Phones rated T3 or T4 meet FCC requirements and are likely to be more usable with a hearing device’s telecoil (“T Switch” or “Telephone Switch”) than unrated phones.
Vehicles RF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles. Check with the manufacturer or its representative regarding your vehicle. You should also consult the manufacturer of any equipment that has been added to your vehicle. Posted Facilities Switch your phone off in any facility where posted notices require you to do so.
Emergency Calls powders, and any other area where you would normally be advised to turn off your vehicle engine. Emergency Calls This phone, like any wireless phone, operates using radio signals, wireless and landline networks as well as user-programmed functions, which cannot guarantee connection in all conditions. Therefore, you should never rely solely on any wireless phone for essential communications (medical emergencies, for example).
communication at the scene of an accident; do not cut off the call until given permission to do so. Restricting Children's access to your Phone Your phone is not a toy. Children should not be allowed to play with it because they could hurt themselves and others, damage the phone or make calls that increase your phone bill. FCC Notice and Cautions FCC Notice The phone may cause TV or radio interference if used in close proximity to receiving equipment.
Other Important Safety Information warranty if said accessories cause damage or a defect to the phone. Although your phone is quite sturdy, it is a complex piece of equipment and can be broken. Avoid dropping, hitting, bending or sitting on it. Other Important Safety Information • Only qualified personnel should service the phone or install the phone in a vehicle. Faulty installation or service may be dangerous and may invalidate any warranty applicable to the device.
Product Performance Getting the Most Out of Your Signal Reception The quality of each call you make or receive depends on the signal strength in your area. Your phone informs you of the current signal strength by displaying a number of bars next to the signal strength icon. The more bars displayed, the stronger the signal. If you're inside a building, being near a window may give you better reception.
Availability of Various Features/Ring Tones Maintaining Your Phone's Peak Performance For the best care of your phone, only authorized personnel should service your phone and accessories. Faulty service may void the warranty. There are several simple guidelines to operating your phone properly and maintaining safe, satisfactory service. • If your phone is equipped with an external antenna, hold the phone with the antenna raised, fully-extended and over your shoulder.
Battery Standby and Talk Time Standby and talk times will vary depending on phone usage patterns and conditions. Battery power consumption depends on factors such as network configuration, signal strength, operating temperature, features selected, frequency of calls, and voice, data, and other application usage patterns. Battery Precautions • Avoid dropping the cell phone. Dropping it, especially on a hard surface, can potentially cause damage to the phone and battery.
Battery Precautions the battery connected to a charger for more than a week, since overcharging may shorten its life. • Do not use incompatible cell phone batteries and chargers. Some Web sites and second-hand dealers, not associated with reputable manufacturers and carriers, might be selling incompatible or even counterfeit batteries and chargers. Consumers should purchase manufacturer or carrier recommended products and accessories.
• Dispose of used batteries in accordance with local regulations. In some areas, the disposal of batteries in household or business trash may be prohibited. For safe disposal options for Li-Ion batteries, contact your nearest Samsung authorized service center. Always recycle. Do not dispose of batteries in a fire. Care and Maintenance Your phone is a product of superior design and craftsmanship and should be treated with care.
Care and Maintenance • Do not paint the phone. Paint can clog the device's moving parts and prevent proper operation. • Do not put the phone in or on heating devices, such as a microwave oven, a stove or a radiator. The phone may explode when overheated. • If your phone has an external antenna, use only the supplied or an approved replacement antenna. Unauthorized antennas or modified accessories may damage the phone and violate regulations governing radio devices.
Section 15
Section 16: Warranty Information Section 16 Topics Covered • Standard Limited Warranty Section 16: Warranty Information 233
Section 16 Standard Limited Warranty What is Covered and For How Long? SAMSUNG TELECOMMUNICATIONS AMERICA, L.P.
Standard Limited Warranty What are SAMSUNG's Obligations? During the applicable warranty period, SAMSUNG will repair or replace, at SAMSUNG's sole option, without charge to Purchaser, any defective component part of Product.
Section 16 will be warranted for a period of ninety (90) days. All other repaired/replaced Product will be warranted for a period equal to the remainder of the original Limited Warranty on the original Product or for 90 days, whichever is longer. All replaced parts, components, boards and equipment shall become the property of SAMSUNG.
Standard Limited Warranty Section 16: Warranty Information 237 Section 16 WHATSOEVER WITH RESPECT TO THE PRODUCT. ALL IMPLIED WARRANTIES AND CONDITIONS THAT MAY ARISE BY OPERATION OF LAW, INCLUDING IF APPLICABLE THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY LIMITED TO THE SAME DURATION OF TIME AS THE EXPRESS WRITTEN WARRANTY STATED HEREIN.
Section 16 NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY FROM STATE TO STATE/PROVINCE TO PROVINCE. THIS LIMITED WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL PURCHASER OF THIS PRODUCT AND STATES PURCHASER'S EXCLUSIVE REMEDY.
Standard Limited Warranty This Limited Warranty allocates risk of Product failure between Purchaser and SAMSUNG, and SAMSUNG's Product pricing reflects this allocation of risk and the limitations of liability contained in this Limited Warranty. The agents, employees, distributors, and dealers of SAMSUNG are not authorized to make modifications to this Limited Warranty, or make additional warranties binding on SAMSUNG.
Section 16
Index Call Options Auto Answer 185 Auto Retry 186 Call Answer 184 Data 188 TTY 186 Settings 184 A Adjust Ringer setting 35 Axcess Shop 117 Axcess Web 135 How Axcess Web Keys Work 138 Launching Axcess Web 136 Using Axcess Web 137 Using Links 137 B Backup to last menu 60 Battery 11 Charging 13 Low battery indicator 14 Removal 12 Travel adapter 13 C Call Answer mode 32 Call Functions Adjusting the Call Volume 45 Answering a Call 44 Call Log 46 Making a Call — Number Entry Dialing 38 Making a Call — Speed
Display Settings 176 Backlight 180 Banner 180 Dial Screen 179 Menu Style 177 Theme Color 179 E Emergency Calls 38 End key 27 Entering Text 73 Alpha (Abc) Mode 75 Entering Numbers 77 Entering Symbols 78 Entering Upper and Lower Case Letters 77 Text Entry Modes 74 Erase memos 64 Exit Axcess Web 137 F Fast fact, description 10 G Gallery, photo 133 Getting Started 9 Activating Your Phone 11 Understanding this User Manual 10 Voicemail 15 H Health and Safety Information 203 I Icon Glossary 202 242 Input mo
Lock 33 Silent 34 Standby 33 Talk 34 Vibrate 35 Multi shot 128 Photos Multimedia 139 R N Receiving New Messages 104 Navigation key 27 Navigation key shortcuts 60 Notes and tips 10 Notes, description 10 Number Entry Dialing 38 O OK key 26 P Personal Organizer Alarm Clock 165 Calculator 168 Calendar 161 Memo Pad 163 Voice Memo 62 World Time 167 Phone Info 201 Icon Glossary 202 Phone Number 202 Version 202 Phone Modes 53 Phone Number 202 Photo gallery 133 Sending 134 Picture (Pic) message 100 Q Qua
Setup Location 176 Voicemail 105 Shortcut to menus 60 Shutter sound 130 Silent mode U Understanding Your Contacts 79 Adding a New Contact Entry 81 Deleting a Contact Entry 95 Editing an Existing Contact Entry 89 Finding a Contact Entry 84 Memory 96 Pauses 89 Entering 34 Exiting 34 Sound Settings 181 Alerts 183 Ringer Type 182 Volume/Vibrate 181 Speakerphone Key 28 Speed Dialing 40 One-Touch Dialing 41 Three Touch Dialing 41 Two-Touch Dialing 41 Understanding Your Phone 17 Closed View of Your Phone 19
Review memos 63 Voice Service 151 Voicemail 105 Checking 105 Setup 105 VoiceSignal About VoiceSignal 158 Voice Memos 62 W Warranty Information 233 245
