SCH-u340 Series A L L D I G I T A L T r i - M o d e P H O N E User Guide Please read this manual before operating your phone, and keep it for future reference.
Intellectual Property All Intellectual Property, as defined below, owned by or which is otherwise the property of Samsung or its respective suppliers relating to the SAMSUNG Phone, including but not limited to, accessories, parts, or software relating there to (the “Phone System”), is proprietary to Samsung and protected under federal laws, state laws, and international treaty provisions.
Disclaimer of Warranties; Exclusion of Liability EXCEPT AS SET FORTH IN THE EXPRESS WARRANTY CONTAINED ON THE WARRANTY PAGE ENCLOSED WITH THE PRODUCT, THE PURCHASER TAKES THE PRODUCT “AS IS”, AND SAMSUNG MAKES NO EXPRESS OR IMPLIED WARRANTY OF ANY KIND WHATSOEVER WITH RESPECT TO THE PRODUCT, INCLUDING BUT NOT LIMITED TO THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR ANY PARTICULAR PURPOSE OR USE; THE DESIGN, CONDITION OR QUALITY OF THE PRODUCT; THE PERFORMANCE OF THE PRODUCT; THE WORKMANSHIP OF THE P
Table of Contents Intellectual Property ..................................................................................................2 Samsung Telecommunications America (STA), LLC ...................................................2 Disclaimer of Warranties; Exclusion of Liability .........................................................3 Getting Started .............................................................................................7 Understanding this User Manual ......................
Editing an Existing Contact Entry .............................................................................59 Renaming a Contacts Group ....................................................................................63 Deleting a Contacts Entry ........................................................................................63 My Phone# .............................................................................................................64 Memory .......................................
Gallery ..................................................................................................................102 Using Image Gallery ..............................................................................................102 Using Melody Gallery ............................................................................................ 103 Tools .........................................................................................................105 Tools Menu .......................
Understanding this User Manual Section 1: Getting Started Topics Covered • Understanding this User Manual • Activating Your Phone • Charging the Battery • Setting Up Your Voice Mail This section explains how to start using your phone by activating your service, setting up your voice mail, or getting an understanding of how this manual is put together. Understanding this User Manual The chapters of this guide generally follow the same order as the menus and submenus in your phone.
Activating Your Phone Contact your Wireless Carrier and follow their instructions for obtaining service, if necessary. We suggest that you read this guide to fully understand the services your phone supports. Install the Battery Note: Your phone comes packaged with a partially charged rechargeable standard Li-Ion battery and travel adapter. Important!: You must fully charge the battery the first time you use your phone, otherwise you could damage the battery. 1.
Charging the Battery Tip: Your phone has an internal antenna. Do not touch the phone case over the antenna while using your phone as this can affect call quality and can cause the phone to operate at a higher power level than is necessary. Antenna Note: If you are outside of your carrier’s coverage or roaming area, the No Service icon ( ) appears at the top of the phone’s display. If you cannot place or receive calls, try later when service is available, or at another location.
Use the Travel Adapter The travel adapter included with your phone is a convenient, light-weight charger that rapidly charges your phone from any 120/220 VAC outlet. 1. Plug the large end of the Travel Adapter into a standard 120 VAC or 220 VAC wall outlet. Note: For connection to an electrical supply not located in North America, you must use an adaptor of the proper configuration for the power outlet. Use of the wrong adapter could damage your phone and void your warranty. 2.
Setting Up Your Voice Mail Listen to voice mail 1. In idle mode, press and hold the key or dial your own mobile number to dial voice mail. After connecting, you will hear your voice greeting. @ 2. Interrupt your greeting by pressing . 3. You are then prompted to enter your password.
Section 2: Understanding Your Phone Topics Covered • Features of Your Phone • Closed View of Your Phone • Open View of Your Phone • Command Keys • Understanding the Display Screen • Your Phone’s Modes This section outlines some key features of your phone. This section also explains the screen and the icons that are displayed when the phone is in use.
Closed View of Your Phone Closed View of Your Phone 1. Headset Connector 7. Camera Lens 6. Camera Key 2. Volume Key 5. Speakerphone Key 3. External LCD 4. Speaker 1. Headset Connector 6. Camera Key 2. Volume Key 5. Speakerphone Key Command Keys and Features 1. Headset Connector — Used for handsfree, Teletypewriter (TTY), and Telecommunication Device for the Deaf (TDD) equipment. 2.
5. Speakerphone Key — Lets you enable and disable speakerphone mode. 6. Camera Key — In standby mode, press this key to launch the Camera menu. Press and hold this key for a few seconds to launch the camera. 7. Camera Lens — The lens of your built-in camera. Open View of Your Phone 15. Earpiece 14. Internal Display 13. Navigation Key 1. Left Soft Key 2. SEND Key 12. Right Soft Key 11. OK Key 10. END/Power/Menu Exit Key 3. Clear Key 4. Voice Mail Hot Key 9. Alpha-numeric Keys 8.
Command Keys 4. Voice Mail Hot Key — Press and hold to automatically dial your voicemail. 5. Special Function Keys — Enter special characters. Perform various functions. 6. Power/Accessory Connector — Used to plug in the Travel Charger and to connect any available accessory cable. 7. Microphone — The microphone used during phone calls and voice memo recordings. 8. Voice Recognition Key — Lets you access your phone’s voice recognition features. 9.
• In standby mode, press the Contacts (right) soft key ( ) to open the Find screen. • When the right soft key function is Back, press the Back (right) soft key ( ) to back up one menu level. OK Key • In standby mode, press the MENU ( OK ) key to open the main menu. key to accept the highlighted selection. • When the OK key function is Edit, press the Edit ( OK ) key to edit a Draft message.
Understanding the Display Screen Navigation Key Use the directional keys on the navigation key OK to browse menus, sub menus, and lists. Each key also acts as a shortcut to launch applications. Speakerphone Key Use the speakerphone key ( ) — located on the right side of your phone — to switch from using the earpiece to the speakerphone before or during a call. Use the volume keys — located on the left side of your phone — to adjust the volume.
Analog mode indicator — Indicates your phone is operating in an analog service area or that digital service has been interrupted. Also indicates that some network features are not available. Also, you may need to recharge your phone’s battery more often while in an analog service area. Roam — Extended roaming indicator. Roaming occurs when you use your phone outside your home area.
Understanding the Display Screen GPS (911 only) — This icon represents Global Positioning Service (GPS) for 911. GPS — Indicates GPS is on for location. Battery strength — Indicates the battery charge level. The more black bars, the greater the charge. When the battery becomes very low, a flashing empty battery icon displays and the phone sounds an audible alert, which indicates your phone is about to shut down.
External Display Your phone has an external display on the outside of the folder. When you close the phone, the external display shows a digital clock. Icons that appear in the external display indicate the following: • Incoming calls and messages • Alarms and alerts • Battery charge level • Signal strength Your Phone’s Modes Call Answer Mode You can select how you wish to answer a call. 1. In standby mode, press the MENU ( wxyz ) key, then press (for Settings), (for Call Options), and for Call Answer.
Your Phone’s Modes Standby Mode Standby mode is the state of the phone once it has found service and is idle. The phone goes into standby mode: • After you power the phone on. • When you press after a call or from within a menu. END In standby mode, you will see the time, day, and date as well as all phone status icons. 1. While in standby mode, enter a phone number, and press SEN D to place a call. 2. Press END to return to standby mode.
Adjust the Ringer 1. In standby mode, press the volume key ( phone up or down. Options are: • Silent • • Vibrate • • 1 Beep • • Level 1 • • Level 2 ) on the left side of the Level 3 Level 4 Level 5 Vib+Ring 2. When you are satisfied with the setting, press the OK key. Your phone returns to standby mode. Tip: You can also enter the Calls sub-menu by pressing the MENU ( OK ) key, then pressing the and and keys. Use the Volume key on the left side of your phone to adjust the ringer setting.
Section 3: Call Functions Topics Covered • Making a Call — Number Entry Dialing • Making a Call — Speed Dialing • Making a Call — Voice Dialing • Answering a Call • Rejecting a Call • Adjusting the Call Volume • Calls Log • Phone Modes • Roaming This section explains how to make or answer a call. This section also includes the features and functionality associated with making or answering a call.
Making a Call — Number Entry Dialing 1. With the phone on, enter the number you wish to call using the keypad. 2. Press the SEN D key to place the call. Dialing Emergency Numbers You can dial any of the numbers 911, *911, or #911 to place an emergency call. If you dial 911, *911, or #911 and press the emergency number 911, automatically. SEN D key, your phone dials the Important!: Emergency number 911 is hard-coded into your phone.
Making a Call — Speed Dialing • Calling Voicemail from Mexico: Dial 001, plus your ten-digit wireless number. Once you hear the recorded prompt, press and enter your passcode. Manual Pause Calling When you call automated systems (like banking services), you are often required to enter a password or account number. Instead of manually entering the numbers each time, you can store the numbers in your Contacts along with special characters called pauses.
Two-Touch Dialing Memory locations 010 through 099 are special Two-Touch dialing locations. Example: For location number 013, briefly press the key, then press and hold the name and number appear in the display and the number is dialed. @ def key until the Three-Touch Dialing Memory locations 100 through 500 are special Three-Touch dialing locations.
Making a Call — Voice Dialing 2. Say, “Voice Dial”. You are prompted to “Say the name or number”. 3. Speak clearly and say the name of a person in your Contacts list, first name followed by last name. If the name is recognized, Voice Dial repeats the name and dials the number. If Voice Dial is not sure which name you said, it displays a choice list of up to three names and prompts you with “Did you say?” followed by the first name on the list. 4.
If it recognizes the number, Voice Dial repeats it and dials the number. If Voice Dial is not sure it has recognized the number, it displays a choice list of up to three numbers and prompts you with “Did you say?” followed by the first number on the list. 4. Say “Yes” to confirm the number or “No” to hear the next one, or use the keypad to select the correct number from the list. (See “Choice Lists Settings” on page 112, for more information.) • Press the Repeat (right) soft key ( ) to say the name again.
Rejecting a Call Answering an Incoming Call 䊳 Press the key. The ring tone and/or vibration stop and the caller’s voice can be heard in the earpiece. SEN D Tip: You can set your phone to answer calls when you open the folder, when you press any key but the key, or automatically. (See “Call Options” on page 128 for more information. END Rejecting a Call When you reject an incoming call, the call is immediately forwarded to your voice mail.
Outgoing Calls Your phone retains information about the last 20 outgoing calls and stores them in the Outgoing calls log. You can review the Outgoing calls log for the time and date of a call, as well as other information. Note: To quickly view your most recent calls, briefly press in standby mode. Up to 20 of your most recent outgoing, incoming, and missed calls appear in the display. SEND 1. In standby mode, press the MENU ( and OK ) key, then press (for Calls) for Outgoing.
Calls Log 5. Press the OK key to perform the highlighted option’s function. Missed Calls Your phone retains information about the last 20 missed calls (calls that were never answered) and stores them in the Missed call log. You can review the Missed call log for the time and date of the call, as well as other information. 1. In standby mode, press the MENU ( and def OK ) key, then press (for Calls) for Missed. A list of your missed calls appears in the display. abc 2.
1. In standby mode, press the MENU ( OK ) key, then press (for Calls) and for Call Timer. The following options appear in the display: • Last Call — View the duration of your last call. • Total — View the duration of the total call, incoming and outgoing, made on your phone since the last erasure. • LifeTime — View the duration of all calls on your phone since activation (LifeTime timers cannot be erased). • Erase Total — Erases the counters for the Total call timer.
Phone Modes When in standby mode, you will see the time, day, and date in the display as well as all currently active icons. When in standby mode, you can: • Make calls. • Receive calls and messages. • Access your phone’s menus. • Change your phone’s mode. • Activate Voice Command. Receive Messages in Standby Mode You can receive messages while in standby mode. An alert tone sounds and a notification message appears in the display when a new message arrives.
“Entering Silent Mode” briefly appears in the display and your phone returns to standby mode. The Silent Mode icon ( ) appears in the top line of the display. Exit Silent Mode 䡲 In standby mode, press and hold the key. “Exit Silent Mode” briefly appears in the display and your phone returns to standby mode.
Roaming Symbol Mode Symbol mode lets you use keypad number keys to enter symbols such as @ or % into a text message, event, or e-mail address without going through repeated key presses as with Alpha mode. You press the key that corresponds with the symbol that you wish to enter. For example, press for an exclamation point (!).
How Roaming Works Roam Option lets you set roaming preferences if you move in and out of your home network. The following roaming options are available: • Home only — Your phone is available for normal operation only in the designated coverage area. • Automatic-A — Your Wireless Provider’s Preferred Roaming List (PRL) of networks is used to acquire service. If no preferred networks are found, any digital “A” system is acquired. • Automatic-B — Your Wireless Provider’s PRL is used to acquire service.
Section 4: Menu Navigation Topics Covered • Menu Navigation • In Use Menu Outline • Menus and sub-menus This section explains the menu navigation for your phone. It also includes an outline of all the available menus associated with your phone.
Menu Navigation You access the menus and sub-menus in your phone by using the navigation keys ( OK ), soft keys ( ), or a shortcut. Navigate Using Keys 1. In standby mode, press the MENU ( OK ) key. The Main menu (the first of several menus) appears in the display. 2. Use the navigation keys to browse through the menus in your phone. 3. Press the OK key to select a menu or sub-menu that then appears in the display. Return to the Previous Menu There are two methods for exiting a menu or list.
In Use Menu Outline Navigation key shortcuts Some applications can be launched by pressing one of the four navigation keys (see the illustration) while in standby mode. Ringer Type Camera OK easyedgeTM Calendar * Calendar can be customized. Press the MENU jkl key ( OK ), then press wxyz , . In Use Menu Outline Your phone includes both a Main menu and an In-Use Menu. The In-Use Menu is accessible only when you are in a call. 1.
3. Press the MSG (right) soft key ( ) to access the Messages menu to receive, review, and send messages during the current call. Menus and sub-menus 1 Contacts 1.1 1.2 Find Add 1.2.1 1.2.2 1.3 Rename Group 1.3.1 1.3.2 1.3.3 1.3.4 1.3.5 1.4 1.5 2 Friend Family Colleague VIP No Name My Phone# Memory Calls 2.1 2.2 2.3 2.4 Outgoing Incoming Missed Erase Logs 2.4.1 2.4.2 2.4.3 2.4.4 2.5 2.6 Outgoing Incoming Missed All Calls Call Timer 2.5.1 2.5.2 2.5.3 2.5.
Menus and sub-menus 2.6.3 2.6.4 3 Total Erase Total Messages 3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8 New Text Msg New Pic Msg New Handwr.Msg Inbox Outbox Drafts Voice Mail Msg Setting 3.8.1 Text Msg 3.8.1.1 3.8.1.2 3.8.1.3 3.8.1.4 3.8.1.5 3.8.1.6 3.8.1.7 SaveInOutbox Insert Sign. Delivery Ack Direct View Signature Callback # Block Address 3.8.1.7.1 3.8.1.7.2 3.8.1.7.3 3.8.2 Pic Msg 3.8.2.1 3.8.2.2 3.8.2.3 3.8.2.4 3.8.
3.9 Erase Msg 3.9.1 3.9.2 3.9.3 3.9.4 3.9.5 4 Voice Inbox Outbox Drafts All Messages easyedgeSM 4.1 4.2 easyedge Gallery 4.2.1 Image Gallery 4.2.1.1 4.2.1.2 4.2.2 Melody Gallery 4.2.2.1 4.2.2.2 5 Preloaded Downloaded Display 5.1 5.2 Menu Style Animation 5.2.1 Opening 5.2.1.1 5.2.1.2 5.2.2 5.2.3 My Image Preloaded Wallpaper 5.2.3.1 5.2.3.2 5.3 5.4 5.5 My Image Preloaded Closing 5.2.2.1 5.2.2.2 My Image Preloaded Theme Banner Backlight 5.5.1 5.5.2 5.5.3 5.5.
Menus and sub-menus 5.6 5.7 5.8 5.9 6 Auto-Hyphen Dial Digits Dial Screen Front Contrast Sounds 6.1 Volume/Vibrate 6.1.1 6.1.2 6.2 Ringer Type 6.2.1 6.2.2 6.2.3 6.2.4 6.3 7 Minute Beep Service Connect Disconnect Fade Roam Privacy Power On/Off Roam Ringer Whisper Mode Camera 7.1 7.2 8 Volume Tone Length Alerts 6.4.1 6.4.2 6.4.3 6.4.4 6.4.5 6.4.6 6.4.7 6.5 6.6 6.7 Calls Alarm Data Calendar Key Beep 6.3.1 6.3.2 6.4 Calls Alarm Take a Photo Photo Gallery Tools 8.
8.1.1 8.1.2 Voice Command Voice Memo 8.1.2.1 8.1.2.2 8.1.2.3 8.1.3 Record Review Erase All Voice Setting 8.1.3.1 Digit Dialing 8.1.3.1.1 8.1.3.1.2 8.1.3.2 Sensitivity 8.1.3.2.1 8.1.3.2.2 8.1.3.3 8.2 8.3 8.4 8.5 8.6 8.7 8.8 8.9 8.0 9 Settings 9.1 44 Alarm Clock 1 Alarm Clock 2 Alarm Clock 3 World Time Calculator Location Prompts Digits Names Name Settings Voice Launch About Today Calendar Jump To Date To Do List Memo Pad Count Down Alarm Clock 8.8.1 8.8.2 8.8.
Menus and sub-menus 9.2 Network 9.2.1 9.2.2 9.3 Set NAM Roam Option Security 9.3.1 9.3.2 9.3.3 9.3.4 9.3.5 Lock Phone Change Lock Emergency # Voice Privacy Restriction 9.3.5.1 9.3.5.2 9.3.6 9.3.7 9.4 Erase Memory Reset Phone Call Options 9.4.1 9.4.2 Auto Retry Data 9.4.2.1 9.4.2.2 9.4.3 9.4.4 9.4.5 9.4.6 9.5 9.6 9.7 9.8 9.
Section 5: Entering Text Topics Covered • Text Entry Modes • Changing the Text Entry Mode • Entering Text in Alpha Mode • Entering Text in T9 Word Mode • Entering Upper and Lower Case Letters • Entering Symbols • Entering Numbers This section outlines how to select the desired text input mode when entering characters into your phone. This section also describes how to use the T9 predictive text entry system to reduce the number of key strokes associated with entering text.
Text Entry Modes Text Entry Modes You can compose text messages using alphabetical characters, symbols, and numbers. Each method of character entry (symbol, number, and so on) is called a text entry mode. There are four text entry modes, as indicated: • Alpha — Alphabetical text entry mode. Options are: • ABC — All upper case • Abc — Initial capital • abc — All lower case • Symbol — Symbol entry mode. Enter symbols into your message by pressing the corresponding number that appears above it in the display.
1. Enter characters while in Alpha (ABC) mode by pressing the key with the desired characters (such as, pressing ghi once for “g”). 2. Press the key repeatedly until the desired character appears in the display (such as, pressing ghi two times for “h”). 3. Pause briefly and the displayed character is accepted and inserted into your message. 4. Press the key to enter a space.
Entering Upper and Lower Case Letters T9 Word recognizes that the most commonly used word for the numeric sequence you just entered is “Samsung.” Entering Upper and Lower Case Letters In Alpha (ABC) and T9 Word modes, you can select to enter only upper case letters (ABC/T9 WORD), only lower case letters (abc/T9 word), or a mix of the two (Abc/T9 Word). 1. While in T9 Word or Alpha mode, use the capitalization setting. Simply press the desired capitalization mode appears.
Entering Numbers Enter numbers into a text message while in Number mode (123). for instructions on changing text entry modes. Note: See “Changing the Text Entry Mode” on page 47 for instructions on changing text entry modes. 䊳 50 While in Number mode, press the key containing the corresponding number that you wish to insert into your message.
Section 6: Understanding Your Contacts Topics Covered • Your Contacts List • Adding a New Contacts Entry • Finding a Contacts Entry • Editing an Existing Contact Entry • Renaming a Contacts Group • Deleting a Contacts Entry • Memory This section explains how to manage your daily contacts by storing their name and number in your Contacts. Contacts entries can be sorted by name, entry, or group.
Your Contacts List Your Contacts list can store up to 500 numbers, with each contact having up to five associated phone numbers, an e-mail address, and a picture ID. Each phone number can be up to 32 digits in length, including hard pauses. Contact names can be up to 22 characters in length. You can also specify a memory location for each entry, and you can restrict access to the Contacts list to prevent unauthorized use.
Adding a New Contacts Entry 3. Enter the phone number or e-mail address for the new Contacts entry, then press the OK key. The following options appear in the display: • New Entry — Lets you create a new Contacts entry. • Find — Lets you add the number or e-mail address you just entered to an existing Contacts entry. 4. Use the navigation keys to highlight New Entry, then press the OK key. The following (number type) icons appear in the display: Home Office Pager Fax Mobile 5.
• Wait — a hard pause (awaits input from you). 3. Use the navigation keys to highlight the pause option of your choice. 4. Press the OK key to enter the highlighted pause into your number sequence. 5. When you’re finished entering the number and pauses, press the Save (right) soft key ( ) to store the number in your Contacts. Saving a Number from a Call Once you’ve finished a call, you can save the number of the caller to your Contacts list.
Adding a New Contacts Entry Storing Number from a Calls Log You can store numbers from the Calls logs to your Contacts. 1. In standby mode, press the MENU ( OK ) key, then press abc for Calls. 2. Press the corresponding number on the keypad to view the following Calls logs: • Press for Outgoing • Press for Incoming • Press for Missed A list of your calls appears in the display. @ abc def 3. Use the navigation keys to highlight the number you wish to store in Contacts, then press the OK key. 4.
Finding a Contacts Entry Voice Method Use the VoiceSignal Contacts command to view contact information for any named contact stored in your Contacts list by saying the name. Note: The Contacts command shows the requested contact information in the display but does not dial any phone numbers for the contact. To look up information for a specific contact: 1. In standby mode, press and hold to launch VoiceSignal. “Say a Command” appears in the display and is pronounced through the speaker. 2.
Finding a Contacts Entry 2. Use the navigation keys to select the method you wish to use to find the entry. The available Find methods are: • By Name — Search the Contacts alphabetically by name. • By Entry — Search the Contacts by entry number. • By Group — Search the Contacts by selecting from one of the five available groups. • By Number — Search the Contacts numerically by phone number. Find by Name This option lets you find a Contacts list entry by its contact name. 1.
1. In the Find screen, use the Left and Right navigation keys to show By Entry in the display. 2. When the desired Contacts entry is listed in the display, highlight the contact using the navigation keys (if necessary). Then do one of the following: • Press the key to dial the number associated with the named contact. • Press the key to dial the number associated with the named contact. • Press the OK key to view information about the contact. • Press the Option (left) soft key ( ).
Editing an Existing Contact Entry – Send Text Msg — Lets you send a text message to the selected contact. – Send Pic Msg — Lets you send a picture message to the selected contact. 5. Use the navigation keys to highlight an option, then press the OK key to enter that option’s sub-menu. Find by Number This option lets you find a Contacts list entry by its Location number. 1. In the Find screen, use the Left and Right navigation keys to show By Number in the display. 2.
• Erase — Erases the selected contact. • Add New — Lets you add a new number to your Contacts list or to the selected contact. • Send Text Msg — Lets you send a text message to the selected contact. • Send Pic Msg — Lets you send a picture message to the selected contact. The Edit option is highlighted. 5. Press the OK key. The Contacts information screen appears in the display with the contact name highlighted. 6. Use the navigation keys to highlight a number stored in this contact entry. 7.
Editing an Existing Contact Entry Selecting the Number to be Speed Dialed If a contact has more than one stored number (such as Home and Office), you can select which of these numbers your phone will dial when you speed dial that contact. 1. In standby mode, press the Contacts (right) soft key ( ). The Find screen appears in the display with By Name showing. 2. Use the navigation keys to display the search method that you wish to use (By Name, By Entry, By Group, or By Number). 3.
The following number types appear in the display: Home Office Pager Fax Mobile — Or — The following address types appear in the display: Alias E-mail 7. Use the navigation keys to highlight the number type or address type that matches the number or e-mail address you are adding, then press the key. OK 8. Press the OK key again at the Contacts menu. The number is added to the existing entry. Edit an Existing E-mail Address 1.
Renaming a Contacts Group 9. Press (@ symbol), and enter the remainder of the e-mail address using the keypad. (See “Entering Text“ on page 46 for more information.) abc 10. Press the Option (left) soft key ( ). 11. Use the navigation keys to highlight .com, then use the navigation keys to show the desired domain type (.com, .edu, .net), then press the 12. Press the OK OK key. key to save your changes. Renaming a Contacts Group Use this option to rename a group in your Contacts list. 1.
• Send Text Msg — Lets you send a text message to the selected contact. • Send Pic Msg — Lets you send a picture message to the selected contact. 5. Use the navigation keys to highlight Erase. 6. Press the OK key. The phone prompts you to confirm the erasure. 7. Use the navigation keys to highlight Yes or No, then press the OK key. My Phone# Use the My Phone# option to view the phone number assigned to your phone.
Section 7: Messaging Topics Covered • Types of Messages • Creating and Sending Text Messages • Message Send Options • Creating and Sending Picture Messages • Creating and Sending Handwritten Messages • Retrieving New Messages • Voicemail • Message Folders • Message Settings • Erasing Messages This section explains how to create, send, receive, and view different types of messages. This section also includes the features and functionality associated with messaging.
Types of Messages Your phone is able to send and receive Text and Picture messages to compatible phones and devices. Text messages can be up to 160 characters in length. Picture message text can be up to 1,000 characters in length. To access the types of messages, do the following: 1. In standby mode, press the Message (left) soft key ( ), then press for Send Message.
Message Send Options 5. Once you’re finished entering your message, press the OK key. The following New Message options appear in the display: • Edit Send To — Edit the recipient’s Send To number. • Edit Text — Edit the content of your message. • Send Options — Choose the Priority, Validity, whether you wish to receive a Delivery Ack (acknowledgement) message, to insert a Call Back #, and whether you wish to Defer Delivery of the message to another day or time.
Creating and Sending Picture Messages Send Picture messages to recipients with a compatible phone or other device, and accompany the Picture message with a voice memo, ring tone, or downloaded ring tone. 1. In standby mode, press the Message (left) soft key ( ), then press for New Pic Msg. The New Pic Message screen appears in the display with the Send To field highlighted. abc 2. Enter the phone number(s) or e-mail address(s) of an intended recipient of the Picture message.
Creating and Sending Picture Messages 7. Use the Up and Down navigation keys to highlight the desired sub-menu or option and press the OK key. The photos or images Gallery screen appears in the display. 8. Use the navigation keys to highlight a photo or image to insert into your picture message, then press the OK key. 9. Press the Down navigation key to highlight the Message field. 10. Enter the message text using the keypad. See “Entering Text” on page 46 for more information. 11.
Creating and Sending Handwritten Messages New Handwr.Msg lets you quickly send handwritten messages as pictures, rather than using the keypad to enter the text into a message. 1. In standby mode, press the Message (left) soft key ( ), then press for New Handwr.Message. The camera viewfinder screen appears in the display in Sketch color tone with normal brightness, Fine quality, and low resolution with Zoom functionality. def 2.
Voicemail • Press the Ignore (left) soft key ( ) to ignore the message and save it to your inbox where you can view it later. • Press the View (right) soft key ( ) to open the message, your call remains connected. Voicemail Voicemail allows callers to leave voice messages in your voice mailbox, and lets you review, play, and delete your voice messages any time you are in a network coverage area. Voicemail Setup Before callers can leave voice mail messages, you must first set up your account.
5. Use the navigation keys to highlight an option. Press the OK key to perform the function for the highlighted option. Outbox Your phone stores outgoing messages in the Outbox, regardless of whether the message was successfully transmitted to, or received by, the addressee. Tip: Verify whether and when a message or e-mail was successfully received by enabling the Delivery Ack feature. 1. In standby mode, press the Message (left) soft key ( jkl ), then press for Outbox.
Message Settings 6. Press the OK key to perform the function for the highlighted option. Voicemail New voice messages in your voice mailbox are logged in the Voicemail folder of the Messages menu. Open the Voice Mail folder to view the Callback # (if available), Urgency, and other details of new voice mail messages. 1. In standby mode, press the Message (left) soft key ( ), then press for Voicemail.
Message Alert The Message Alert menu lets you set Volume level, Ringer type, and Reminder for message alerts. 1. In standby mode, press the Message (left) soft key ( ), then press (for Msg Setting), (for General), and Msg Alert. The following options appear in the display: • Volume/Vibrate — Lets you set the default volume for message alerts. • Type — Lets you assign ringer types and melody tones for message alerts.
Erasing Messages • Drafts — Lets you delete all draft messages from the Drafts folder. • All Messages — Lets you delete all messages from all message folders. 2. Use the navigation keys to highlight the folder containing the messages that you wish to delete. 3. Press the OK key to open the highlighted folder. You are prompted to confirm the erasure of all messages in the folder. 4. Use the navigation keys to highlight Yes or No, then press the Messaging OK 75 key.
Section 8: easyedgeSM Topics Covered • easyedgeSM Features • Accessing easyedgeSM With easyedgeSM, you can download full featured applications over the air including games, personalized ring tones, pictures, and more. You can send and receive instant messages and email, or browse the web to catch up on all the latest news. This section outlines how to obtain games and other applications for your phone. For more information, contact U.S. Cellular.
easyedgeSM Features easyedge SM Features 1. In standby mode, press the MENU ( ghi OK ) key, then press for easyedge. The following options appear in the display: • easyedge • Gallery 2. Use the Up/Down navigation key to highlight easyedge, then press the OK key. Accessing easyedgeSM Applications Shopping and Downloading Download games, ring tones, e-mail, and more using easyedgeSM. For information on airtime charges, contact U.S. Cellular. 1.
2. At the easyedgeSM menu, use the navigation keys to highlight the Settings icon ( ), then press the OK key. The following options appear in the display: • Order Apps — Download applications over the network. • Move Apps — Move previously downloaded applications between available folders. • Manage Apps — View used and available memory. • Main Menu View — Select whether you wish to view the main easyedgeSM menu in a list or icon format. • Screen Savers — View downloaded screensavers.
Accessing easyedgeSM Airtime Charges Charges will apply for data usage. Data usage is used when you are browsing the easyedgeSM Shop, downloading and restoring applications, or canceling subscription applications. Charges will also apply when you use applications that require network connections, such as downloading information and sending text messages. Cancelling Subscription To cancel a subscription to an application, do the following: 1.
7. Use the navigation keys to highlight Remove. 8. Press the OK key. Disabled Applications You can install new applications even if the memory of your phone is full by partially removing (disabling) applications you haven’t used recently. When you need to use a disabled application, you can restore it at no additional purchase cost. Restoring Applications Disabled applications can be quickly restored at no additional purchase cost.
Section 9: Display Topics Covered • Display Settings • Menu Style • Animation • Theme • Banner • Backlight • Auto Hyphen • Dial Digits • Dial Screen • Front Contrast This section shows you how to change your phone’s menu appearance, display brightness and contrast, and display content to better meet your needs.
Display Settings You can set the menu style, standby mode animation, customize backlight settings, and more in the Display sub menu. 1. In standby mode, press the MENU ( OK ) key, then press for Display. The following menus appear in the display: • Menu Style — Choose how main menus appear in the display when the MENU ( OK ) key is pressed. • Animation — Choose the images that display on your phone when you turn it on, turn if off, and while in standby mode.
Theme • Opening — Lets you select an animated image file that appears in the display during the phone’s power on sequence. • Closing — Lets you select an animated image file that appears in the display during the phone’s power off sequence. • Wallpaper — Lets you select an animated image file that appears in the display when your phone is in standby mode. 2. Use the navigation keys to highlight the desired animation, then press the OK key.
3. Press the OK key to save the new banner. Backlight You can set the backlight for your display or keypad to remain on for a specified period of time or remain on as long as the folder is open. Note: Prolonged backlight use drains your battery faster. 1. In standby mode, press the MENU ( OK ) key, then press (for Display) and for Backlight. The following sub menus appear in the display: • Main LCD — Sets the time the internal display backlight remains on after a period of inactivity.
Dial Screen 1. In standby mode, press the MENU ( ) key, then press (for for Dial Digits. The following options appear in the jkl OK Display) and display: • Hyphenated — Each set of entered digits (area code, exchange, and directory number) each appear in a different color. pqrs Note: To select the Hyphenated option, you must first set the Auto Hyphen to On. • Rainbow — Entered digits each appear in a different color in the dialing screen. • Basic — Entered digits appear as black in the dialing screen.
Taking Pictures Section 10: Camera Topics Covered • Taking Pictures • Understanding Your Camera • Saving Pictures • The Photo Gallery Use your SCH-u340 phone to take full color digital pictures, display them on your phone’s vivid color display, and instantly share them with family and friends. It’s fun, and as easy to use as a traditional point-and-click camera. Depending on the resolution you choose, you can save dozens of pictures in your phone’s memory.
3. Using the display as a viewfinder, press the OK key when the image that you wish to capture appears in the display. 4. Press the Save (left) soft key ( 5. Press the OK key ( OK ) to save the picture to memory. ) to include the picture in a new picture message. 6. Press the Erase (right) soft key ( ) to erase the photo. Tip: You can change a number of the camera’s settings to suit particular uses for your pictures. See “Understanding Your Camera” on page 89 for more information.
Understanding Your Camera Understanding Your Camera Camera Screen When you activate your phone’s camera, the first and second lines of the display are reserved for the current camera setting and option icons. The center of the display shows a viewfinder image of the subject at which the camera is pointed. The soft key labels on the bottom line of the display change to the following: • Option — Pressing the left soft key ( ) opens a pop-up menu of camera options.
Counter — Indicates the remaining number of pictures you can take (up to 200). Multi Shot — Indicates the Multi Shot option is active and that you will take and save multiple pictures of the current subject in quick succession when you press the Camera key ( ) or the OK key. The number of pictures taken depends upon the Resolution setting (High = 3 shots, Med = 5 shots, Low = 7 shots).
Understanding Your Camera 3. When the image is at the desired brightness, press the OK key or the Camera key ( ) to take the picture. Camera Options The Camera Options let you override the default camera settings. To access the Camera Options, do the following: 1. Press and hold the Camera key ( ) on the right hand side of your camera. The camera viewfinder screen appears in the display indicating your phone is in camera mode. 2. Press the Option (left) soft key ( ).
2. Use the Up and Down navigation keys to highlight the desired resolution. 3. Press the OK key to save the selected setting. You’re returned to the Settings menu. Note: The resolution setting affects zoom capabilities. When resolution is set to High, only X1 zoom is available. When resolution is set to Med, X1 and X2 are available. When resolution is set to Low, X1, X2, and X3 zoom settings are available.
Understanding Your Camera The next time you press the Camera key ( ) or the takes several pictures in rapid succession. OK key, the camera Fun Frame The Fun Frame option lets you temporarily apply one of the preloaded picture frames in your phone to characterize or enhance one or more pictures. 1. In camera mode, press the Option (left) soft key ( ), then press for Fun Frame (or use the navigation keys to highlight Fun Frame, then press the OK key).
3. When you decide on the Color Tone you wish to use, press the Select (left) soft key ( ) or the OK key. The camera screen appears in the display with your selected Color Tone applied. The next time you press the Camera key ( ) or the applies the selected Color Tone to your picture.
Saving Pictures Shutter Sound The Shutter Sound setting lets you choose the sound our phone plays whenever you take a picture. Aside from being a cool sound effect, Shutter Sound acts as an audible reminder that your camera has taken a picture. 1. In camera mode, press the Option (left) soft key ( ), then press for Shutter Sound. The following options appear in the display: • Sound 1 • Sound 2 • Sound 3 • Sound 4 • Sound 5 2. Use the navigation keys to highlight shutter sounds.
2. Use the navigation keys to highlight Photo Gallery, then press the OK key. Any pictures that you’ve saved appear in the display. 3. Use the navigation keys to browse pictures in the gallery. 4. Press the Option (left) soft key ( ) while viewing pictures in the Picture Gallery. The following options appear in the display: • Pic Msg — Send the currently displayed or highlighted picture as a Picture message.
Section 11: Sounds Topics Covered • Volume/Vibrate • Ringer Type • Key Beep • Alerts • Power On/Off • Roam Ringer • Whisper Mode This section shows you how to customize your phone’s audio properties, such as ringers, keypad tones, alerts, shut down sounds, and more.
Volume/Vibrate Use the Volume/Vibrate sub menu to set the default volume for incoming calls and alarms. 1. In standby mode, press the MENU ( OK ) key, then press (for Sounds) and for Volume/Vibrate. The following options appear in the display: • Calls — Lets you set your phone to be silent, play a sound, and/or vibrate in response to incoming calls. • Alarm — Lets you set your phone to be silent, play a sound, and/or vibrate in response to a preset alarm time being reached. 2.
Key Beep Key Beep Key Beep allows you to adjust the volume level and length of tone that the keypad generates each time you press a key. 1. In standby mode, press the MENU ( OK ) key, then press (for Sounds) and for Key Beep. The following options appear in the display: • Volume — Silent, or Levels 1 – 5 • Tone Length — Long or Normal Volume is highlighted. mno def 2. Press the key to adjust the Key Beep volume. • Use the volume keys or navigation keys to set the volume level for keypad tones.
Power On/Off Set your phone to play a sound whenever you turn the phone on and off. 1. In standby mode, press the MENU ( and OK ) key, then press mno (for Sounds) for Power On/Off. jkl 2. Use the navigation keys to highlight Off or On, then press the OK key. Roam Ringer Set your phone to sound a unique tone when a call is received outside a network service area. This feature is set to Off by default. 1.
Section 12: Gallery Topics Covered • Gallery • Using Image Gallery • Using Melody Gallery This section outlines Gallery and key features associated with Gallery.
Gallery 1. In standby mode, press the MENU ( ghi OK ) key, then press (for easyedgeSM) and for Gallery. The following Gallery sub-menus appear in the display: • Image Gallery — Lets you choose the multi-media or pictures that appear in your phone’s display. • Melody Gallery — Lets you assign melody tones for calls, alarms, and other alerts. 2. Use the navigation keys to highlight a sub-menu. abc 3. Press OK to enter the highlighted sub-menu.
Using Melody Gallery 7. Press the Back (right) soft key ( END ), to return to previous menu or press to return to standby mode. Image Gallery Options • Assign — use to assign selected images, melodies, and animelodies. • Image Info — displays information about the image, such as the title (name), and the data size. Using Melody Gallery Melody Gallery lets you assign ringer types and melody tones for calls, alarms, and other alerts. 1.
7. Press the Back (right) soft key ( the END ) to return to previous menu or press key to return to standby mode. Melody Gallery Options • Assign — use to assign selected image, melody, and animelody. Downloaded Melody Gallery Options • Assign — use to assign selected image, melody, and animelody. • Rename — Lets you rename the image • Lock — Lets you protect files from being deleted. • Erase — erases a selected file. • Erase All — erases all files.
Section 13: Tools Topics Covered • Tools Menu • Voice Kit • Today • Calendar • To Do List • Alarm Clock • Memo Pad • World Time • Calculator • Count Down This section explains how to use your phone’s voice recognition and digital assistant functionalities to schedule events, set reminders, create a “to do” list, perform calculations, and more.
Tools Menu Tools is a suite of Personal Digital Assistant (PDA) applications such as a Calendar, To Do List, and Memo Pad that run on your phone. You can use your phone to schedule events, set reminders, create a to do list, perform calculations, and more with the functions provided by this useful feature. Opening Tools Menu 1. In standby mode, press the MENU ( OK ) key, then press for Tools.
Voice Kit To access your phone’s voice settings, do the following: 1. In standby mode, press the MENU ( OK ) key, then press (for Tools) and for Voice Kit. The following options appear in the display: • Voice Command — Lets you place calls, access your Contacts List, review your appointments, and more by speaking commands into your phone. Also see “Making a Call — Voice Dialing” on page 26 and “Voice Commands” on page 107 for more information. • Voice Memo — Lets you record, review, and erase voice memos.
• Contacts — Lets you look up and display contact information for any name stored in your Contacts list by saying the name. (See “Finding a Contacts Entry” on page 56 for more information.) • Status — Lets you say a single command (“Status”) to check your phone's network coverage, signal strength, and battery. Note: Speaking clearly, say the command that you want to use. If, after a few seconds, the device has not recognized a command, it prompts you to repeat the command.
Voice Kit 2. Wait for the beep, then start speaking. As it is recording the phone displays a countdown timer that shows the seconds remaining for the recording. • To pause the memo, press the Pause (left) soft key ( ). When a memo is paused, select Resume to resume recording. 3. Press the Stop (right) soft key ( ) once you’re finished recording. The Memo Review list appears in the display with the newest memo highlighted. 4. Press the Play (right) soft key ( ) to review the newest memo. 5.
Voice Setting VoiceSignal is state-of-the-art voice recognition software for your mobile phone that lets you dial numbers, lookup contact information, and open applications using your voice. To access your phone’s voice settings, do the following: OK ) key, then press (for Tools), (for Voice Kit), and for Voice Setting. The following options appear in the display: • Digit Dialing — Lets you adapt the voice recognition function to your voice.
Voice Kit • Only adapt digits if you are regularly having problems with digit dialing. Once you adapt, digit dialing will not work as well for other people using your phone. (You can always reset digit adaptation to its original state, as described below.) Adapt Digits To adapt digit dialing, do the following: OK ) key, then press (for Tools), (for Voice Kit), and (for Voice Setting), and for Digit Dialing. The following options appear in the display: • Adapt Digits • Reset Digits 2.
3. Press the OK (left) soft key ( ) or the OK key to reset your digit adaptation, or press the Back (right) soft key ( ) to cancel. Sensitivity OK ) key, then press (for Tools), (for Voice Kit), and (for Voice Setting), and for Sensitivity. The following options appear in the display: • Commands — Lets you control your phone’s sensitivity to spoken voice commands. • Names — Lets you control your phone’s sensitivity to spoken names from your Contact list. 2.
Voice Kit • Always On — VoiceSignal always displays a choice list, even when there is only one choice. • Always Off — VoiceSignal never displays a choice list. 4. Press the OK key or the OK (left) soft key ( ) to accept the new setting. Sound Sound lets you specify what (if any) text prompts you want your phone to read to you through the earpiece. OK ) key, then press (for Tools), (for Voice Kit), and (for Voice Setting), and for Sound.
About VoiceSignal This option causes the About VoiceSignal screen to appear in the display, showing version and build information about the VoiceSignal software included on your phone. 䊳 In standby mode, press the MENU ( OK ) key, then press (for Tools), (for Voice Kit), and (for Voice Setting), and for About. The About VoiceSignal screen appears in the display showing the version level of the VoiceSignal software currently installed on your phone.
Calendar 5. When you’re finished entering details for the event, press the OK key. You’re prompted to enter the time and date for the event. 6. Use the Left and Right navigation keys to change between am or pm. 7. Enter the time and date for the event using the keypad. 8. When you’re finished entering the time and date, use the navigation keys to highlight Alarm Option field. 9. Use the navigation keys to highlight the amount of time before the event occurs that you wish to be notified by an alert.
Jump To Date You can to go directly to any date that you specify in the Jump to Date entry screen. 1. In standby mode, press the MENU ( OK ) key, then press (for Tools) and for Jump To Date. The Jump To Date screen appears in the display with the current month highlighted. tuv ghi 2. Enter the desired Jump to Date and press OK . The calendar month for the date that you specified appears in the display. • The Jump to Date is underlined. • The current date is surrounded by a box.
Memo Pad 2. Use the Left and Right navigation keys to browse tasks in your To Do List. Events are presented in order of priority. 3. Press the Option (left) soft key ( ) while viewing your To Do List. A pop-up menu containing the following options appears in the display: • Add new — Add new task to the To Do List. • Edit — Edit the task currently appearing in the display. • Erase — Erase the task currently appearing in the display. • Erase All — Erase all tasks from your To Do List. 4.
3. Press the Option (left) soft key ( ) while viewing your memos. A popup menu with the options listed in the following table appears in the display: • Add new — Add a new memo to Memo Pad. • Edit — Edit the memo currently highlighted or appearing in the display. • Erase — Erase the memo currently highlighted or appearing in the display. • Erase All — Erase all memos from Memo Pad. 4. Use the navigation keys to highlight an option. 5. Press the OK key to perform the function for the highlighted option.
Alarm Clock Review, Add, Edit, and Erase Count Down Events Review scheduled Count Down event to determine how much time remains between the current time/date and any event that you’ve scheduled. You can also add another event, or edit and erase previously scheduled events. 1. In standby mode press the MENU ( and pqrs OK ) key, then press tuv (for Tools) for Count Down. 2. Any stored Count Down events appear in the display.
• Alarm Interval Use the navigation keys to select options and to select values for the options. Use the keypad to enter the time for the alarm. 3. Press the OK key when you’re finished entering the time for the alarm. The alarm is set and the alarm icon ( ) appears in the top of the display. When an Alarm Sounds An animated alarm clock appears in the display and an alert sounds when the specified time for the alarm arrives. 䊳 Press the OK key to silence the alarm.
Calculator 1. In standby mode, press the MENU ( and wxyz ) key, then press (for Tools) for World Time. A world map appears in the display. tuv OK 2. Use the navigation keys to display the city and time that you wish to view.
5. Press the 122 OK key to perform the calculation and view the result.
Section 14: Settings Topics Covered • Location Setting • Network Settings • Security Settings • Call Options • Short Cut • Language • Clock Set • Version • Airplane Mode This section explains how to customize your phone to suit your needs and preferences.
Location Setting This function identifies your location to the network via the Global Positioning System (GPS). You can set this function for continuous operation or to operate only in the event that you dial 911. Note: Contact your Wireless Provider to determine whether, when, or where location-based services are available. 1. In standby mode, press the MENU ( Settings) and @ OK ) key, then press wxyz (for for Location.
Security Settings Lock Phone Locking the phone limits all outgoing calls except calls to 911 emergency and the three user-programmable emergency numbers. You can lock the phone manually during use, or set the phone to lock automatically when it is turned on. With the phone in lock mode, you can answer incoming calls, but you must unlock the phone to place outgoing calls (except to emergency and secret numbers). 1.
Emergency # Your phone provides the option of storing three emergency numbers. Each number can be up to 32 digits in length. All emergency numbers can be manually called at any time, even when your phone is locked or restricted. This can be a useful feature for controlling outgoing calls from your phone. Note: Emergency number 911 is hard-coded into your phone. You can dial this number any time, even when the phone is locked or restricted.
Security Settings Note: The default lock code is the last four digits of your telephone number. 2. Enter the lock code, the press for Voice Privacy. The following options listed appear in the display: • Standard — Voice privacy is disabled. • Enhanced — Voice privacy is enabled. 3. Use the navigation keys to highlight the Voice Privacy option of your choice, then press OK .
Reset Phone Reset Phone returns all setup options to their factory default values. Important!: Contact US Cellular Customer Service before using the Reset Phone option. 1. In standby mode, press the MENU ( Settings) and def OK ) key, then press (for for Security. You’re prompted to enter the lock code. wxyz Note: The default lock code is the last four digits of your telephone number. 2. Enter the lock code, the press for Reset Phone.
Call Options • Auto Detect • Baud Rate 2. Use the navigation keys to highlight Auto Detect, then press the OK key. The following options appear in the display: • Data off — No incoming data calls accepted. • Data for next call — Wait for data call for the next 10 minutes. • Data until powered off — Data calls only, no voice calls accepted, until you power the phone off and on again. 3. Use the navigation keys to highlight the Auto Detect option you want, then press the OK key.
1. In standby mode, press the MENU ( OK ) key, then press (for Settings), (for Call Options), and for Call Answer. The Call Answer sub-menu with the following options appears in the display: • Send Key — Press to answer an incoming call. • Flip Open — Open the flip to answer an incoming call. • Any Key — Press any key except , , or the Ignore (left) soft key ( ) to answer an incoming call. 2. Use the navigation keys to highlight the method you wish to use for answering calls, then press OK .
Short Cut International Dialing International dialing shows a list of international dialing codes for frequently dialed countries. You can bookmark a code that you dial most frequently, and that code will be highlighted when you use this feature. 1. In standby mode, press the MENU ( OK ) key, then press (for Settings), (for Call Options), and for International Dialing. The following options appear in the display: • U.
Language The language option on your phone can change the language of voice prompts, menus, and key-input. 1. In standby mode, press the MENU ( OK ) key, then press (for Settings), for Language. The Language sub-menu with the following options appears in the display: • English • Spanish 2. Use the navigation keys to highlight your language preference, then press OK . wxyz mno Clock Set Use the Clock Set sub-menu to set the time and date, which can be selected as Wallpaper in the Display menu.
Airplane Mode Airplane Mode When set to On, Airplane Mode disables all radio functions of your phone. This prevents you from receiving or making calls [except Emergency (911) Calls], but allows you to use other features (such as the Tools) safely in sensitive environments, such as on board an aircraft. 1. In standby mode, press the MENU ( OK ) key, then press (for Settings), and for Airplane Mode.
Section 15: Health and Safety Information Topics Covered • Health and Safety Information • UL Certified Travel Adapter • Consumer Information on Wireless Phones • Road Safety • Operating Environment • Using Your Phone Near Other Electronic Devices • Potentially Explosive Environments • Emergency Calls • FCC Notice and Cautions • Other Important Safety Information • Product Performance • Availability of Various Features/Ring Tones • Battery Standby and Talk Time • Battery Precautions • Care and Maintenance
Health and Safety Information Health and Safety Information Exposure to Radio Frequency (RF) Signals Certification Information (SAR) Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the exposure limits for radio frequency (RF) energy set by the Federal Communications Commission (FCC) of the U.S. government.
The FCC has granted an Equipment Authorization for this mobile phone with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. The maximum SAR values for this model phone as reported to the FCC are: • Head: 1.39 W/Kg. • Body-worn: 0.522 W/Kg. SAR information on this and other model phones can be viewed on-line at http://www.fcc.gov/oet/ea.
Consumer Information on Wireless Phones the short distance between the phone and the user's head. These RF exposures are limited by Federal Communications Commission safety guidelines that were developed with the advice of FDA and other federal health and safety agencies. When the phone is located at greater distances from the user, the exposure to RF is drastically lower because a person's RF exposure decreases rapidly with increasing distance from the source.
• Cooperate in providing users of wireless phones with the best possible information on possible effects of wireless phone use on human health. FDA belongs to an interagency working group of the federal agencies that have responsibility for different aspects of RF safety to ensure coordinated efforts at the federal level.
Consumer Information on Wireless Phones Three large epidemiology studies have been published since December 2000. Between them, the studies investigated any possible association between the use of wireless phones and primary brain cancer, glioma, meningioma, or acoustic neuroma, tumors of the brain or salivary gland, leukemia, or other cancers. None of the studies demonstrated the existence of any harmful health effects from wireless phones RF exposures.
FDA and Cellular Telecommunications & Internet Association (CTIA) have a formal Cooperative Research and Development Agreement (CRADA) to do research on wireless phone safety. FDA provides the scientific oversight, obtaining input from experts in government, industry, and academic organizations. CTIA-funded research is conducted through contracts to independent investigators. The initial research will include both laboratory studies and studies of wireless phone users.
Consumer Information on Wireless Phones phone use by children was strictly precautionary; it was not based on scientific evidence that any health hazard exists. Do hands-free kits for wireless phones reduce risks from exposure to RF emissions? Since there are no known risks from exposure to RF emissions from wireless phones, there is no reason to believe that hands-free kits reduce risks. Hands-free kits can be used with wireless phones for convenience and comfort.
many other groups, was completed in late 2000. This standard will allow manufacturers to ensure that cardiac pacemakers and defibrillators are safe from wireless phone EMI. FDA has tested wireless phones and helped develop a voluntary standard sponsored by the Institute of Electrical and Electronic Engineers (IEEE).
Road Safety 1. Get to know your wireless phone and its features, such as speed dial and redial. If available, these features help you to place your call without taking your attention off the road. 2. When available, use a hands-free device. If possible, add an additional layer of convenience and safety to your wireless phone with one of the many hands free accessories available today. 3. Position your wireless phone within easy reach.
For more information, please call 1-888-901-SAFE, or visit our web-site www.wow-com.com Provided by the Cellular Telecommunications & Internet Association. Operating Environment Remember to follow any special regulations in force in any area and always switch your phone off whenever it is forbidden to use it, or when it may cause interference or danger. When connecting the phone or any accessory to another device, read its user's guide for detailed safety instructions. Do not connect incompatible products.
Using Your Phone Near Other Electronic Devices hearing devices are more immune than others to this interference noise, and phones also vary in the amount of interference they generate. The wireless telephone industry has developed ratings for some of their mobile phones, to assist hearing device users in finding phones that may be compatible with their hearing devices. Not all phones have been rated. Phones that are rated have the rating on their box or a label on the box. The ratings are not guarantees.
Posted Facilities Switch your phone off in any facility where posted notices require you to do so. Potentially Explosive Environments Switch your phone off when in any area with a potentially explosive atmosphere and obey all signs and instructions. Sparks in such areas could cause an explosion or fire resulting in bodily injury or even death. Users are advised to switch the phone off while at a refueling point (service station).
FCC Notice and Cautions communication at the scene of an accident; do not cut off the call until given permission to do so. Restricting Children's access to your Phone Your phone is not a toy. Children should not be allowed to play with it because they could hurt themselves and others, damage the phone or make calls that increase your phone bill. FCC Notice and Cautions FCC Notice The phone may cause TV or radio interference if used in close proximity to receiving equipment.
equipment is improperly installed and the air bag inflates, serious injury could result. • Switch your phone off before boarding an aircraft. The use of wireless phone in aircraft is illegal and may be dangerous to the aircraft's operation. • Failure to observe these instructions may lead to the suspension or denial of telephone services to the offender, or legal action, or both.
Availability of Various Features/Ring Tones • If your phone is equipped with an internal antenna, obstructing the internal antenna could inhibit call performance. • Speak directly into the phone's receiver. • Avoid exposing your phone and accessories to rain or liquid spills. If your phone does get wet, immediately turn the power off and remove the battery. If it is inoperable, call Customer Care for service.
power source. Do not leave the battery connected to a charger for more than a week, since overcharging may shorten its life. • Do not use incompatible cell phone batteries and chargers. Some Web sites and second-hand dealers, not associated with reputable manufacturers and carriers, might be selling incompatible or even counterfeit batteries and chargers. Consumers should purchase manufacturer or carrier recommended products and accessories.
Care and Maintenance Care and Maintenance Your phone is a product of superior design and craftsmanship and should be treated with care. The suggestions below will help you fulfill any warranty obligations and allow you to enjoy this product for many years. • Keep the phone and all its parts and accessories out of the reach of small children. • Keep the phone dry. Precipitation, humidity and liquids contain minerals that will corrode electronic circuits. • Do not use the phone with a wet hand.
Section 16: Warranty Information Topics Covered • Standard Limited Warranty Warranty Information 152
Standard Limited Warranty Standard Limited Warranty What is Covered and For How Long? SAMSUNG TELECOMMUNICATIONS AMERICA, LLC ("SAMSUNG") warrants to the original purchaser ("Purchaser") that SAMSUNG's Phones and accessories ("Products") are free from defects in material and workmanship under normal use and service for the period commencing upon the date of purchase and continuing for the following specified period of time after that date: Phone 1 Year Batteries 1 Year Leather Case/ Pouch 90 Days Hol
What are SAMSUNG's Obligations? During the applicable warranty period, SAMSUNG will repair or replace, at SAMSUNG's sole option, without charge to Purchaser, any defective component part of Product.
Standard Limited Warranty MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY LIMITED TO THE SAME DURATION OF TIME AS THE EXPRESS WRITTEN WARRANTY STATED HEREIN. SOME STATES/PROVINCES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU.
This Limited Warranty allocates risk of Product failure between Purchaser and SAMSUNG, and SAMSUNG's Product pricing reflects this allocation of risk and the limitations of liability contained in this Limited Warranty. The agents, employees, distributors, and dealers of SAMSUNG are not authorized to make modifications to this Limited Warranty, or make additional warranties binding on SAMSUNG.
Index Making a Call — Speed Dialing 25 26 Call Options Auto Answer 130 Auto Retry 128 Call Answer 129 Data 128 TTY/TDD 130 Camera 87 Color Tones 93 Fun Frame 93 Multi Shot 92 Options 91 Photo Gallery 95 Save Pictures 95 Screen 89 Screen Icons 89 Self Timer 92 Taking Pictures 87 Camera Screen 89 Camera Settings Quality 94 Resolution 91 Shutter Sound 95 Change menu style 82 Clear key 16 Contacts List 52 open 52 Creating and Sending New Messages 66 , A Adjust key beep 99 ringer setting 22 Alerts 99 Animatio
Display settings 82 animation 82 auto hyphen 84 backlight 84 banner 83 dial digits 84 dial screen 85 menu style 82 Display sub menu 82 E easyedgeSM 76 Help 78 Settings 77 Shopping and downloading 77 Emergency Calls 24 End key 16 Entering Text 46 Alpha (Abc) Mode 47 Entering Numbers 50 Entering Symbols 49 Entering Upper and Lower Case Letters 49 Text Entry Modes 47 Erase memos 109 Expired applications 80 G Gallery 101 Image 102 Melody 103 Gallery, Photo 95 Getting Started 7 Activating Your Phone 8 Understa
silent 21 standby 21 talk 21 vibrate 21 Multi shot 92 Removing applications 79 Resolution, notes about 90 92 Restoring applications 80 Retrieving New Messages 70 Right soft key 15 Ringer types, assigning 98 Roam ringer 100 Roaming 35 , N Navigation key 17 Network Services Network Selection 124 Notes and tips 7 Notes, description 7 Number Entry Dialing 24 O OK key 16 Open View of Your Phone 14 P Personal Organizer Alarm Clock 119 Calculator 121 Calendar 115 Count Down 118 Memo Pad 117 Today 114 To-Do Li
Sounds 97 Speakerphone Key 17 Speed Dialing 25 One-Touch Dialing 25 Three Touch Dialing 26 Two-Touch Dialing 26 Standard Limited Warranty 153 Standby mode 21 Subscriptions, cancelling 79 T Take pictures with flip open 87 Taking pictures 87 Talk mode 21 Timer, camera 92 Tip, description 7 Tools 105 Tools Menu 106 W Warranty Information 152 Whisper mode 100 Z U Zooming, pictures 90 Understanding Your Contacts 51 Adding a New Contact Entry 52 Deleting a Contact Entry 63 Editing an Existing Contact Entry
