SCH-n330 Series A l l D i g i t a l M O B I L E P H O N E User Guide Please read this manual before operating your phone, and keep it for future reference. YF27.
Intellectual Property All Intellectual Property, as defined below, owned by or which is otherwise the property of Samsung or its respective suppliers relating to the SAMSUNG Phone, including but not limited to, accessories, parts, or software relating there to (the “Phone System”), is proprietary to Samsung and protected under federal laws, state laws, and international treaty provisions.
GH68-07002A Openwave® is a registered Trademark of Openwave, Inc. RSA® is a registered Trademark RSA Security, Inc.
Table of Contents Table of Contents Section 1: Getting Started ................................. 9 Activating Your Phone ....................................................10 Setting Up Your Voice Mail .............................................12 Understanding this User Manual .....................................13 Section 2: Understanding Your Phone ............ 15 Features of Your Phone ..................................................16 Front View of Your Phone ...................................
Table of Contents Entering Numbers ..........................................................67 Section 6: Understanding Your Contacts List . 69 Your Contacts List ..........................................................70 Adding a New Contacts List Entry ...................................71 Finding a Contacts List Entry ..........................................76 Editing an Existing Contacts List Entry ............................78 Deleting a Contacts List Entry .....................................
Table of Contents Messages Settings .......................................................119 Erase Messages ...........................................................120 Section 11: Sounds ........................................ 121 Volume/VibeTonz .........................................................122 Ringer Type ..................................................................123 Key Beep .....................................................................124 Alerts .........................
Table of Contents Operating Environment .................................................195 Using Your Phone Near Other Electronic Devices ..........195 Potentially Explosive Environments ...............................197 Emergency Calls ...........................................................198 FCC Notice and Cautions ..............................................199 Other Important Safety Information ...............................200 Product Performance ............................................
Section 1: Getting Started Topics Covered • Activating your phone • Setting Up Voice Mail • Understanding this User Manual Section 1: Getting Started 9 Section 1 This section allows you to start using your phone by activating your service and phone, setting up your voice mail, contacting customer support, or getting an understanding of how this manual is put together.
Activating Your Phone Contact metroPCS and follow their instructions for obtaining service. We suggest that you read this guide to fully understand the services your phone supports. Important! You should fully charge the battery in your phone before first use, otherwise you could damage the battery. For details, see "Charge the battery" on page 29. Turn your phone on Section 1 1.
Activating Your Phone If you are outside of the metroPCS coverage or roaming area, the no signal ( ) and no service ( ) icons appear on the top bar of the display. Turn your phone off 1. Open the pop-up display on your phone by simultaneously pressing both pop-up display buttons located on each side of the phone. 2. Press and hold for two or more seconds. Your phone powers off.
Setting Up Your Voice Mail Voice mail allows callers to leave voice messages, which can be retrieved any time. Note: Once your voice mail account has been set up, you can use the Voice Mail folder (under the Message menu) to view details of voice messages in your voice mailbox. Section 1 1. In standby mode, press and hold the Down key, press and hold the key or dial your own mobile number to dial voice mail. 2. Press to interrupt the greeting. 3.
Understanding this User Manual Understanding this User Manual The sections of this manual generally follow the same order as the menus and sub menus in your phone. A robust index for quick reference to most features begins on page 215. Also included is important safety information that you should know before using your phone. Most of this information is near the back of the guide, beginning on page 179. Throughout this guide are icons and text that are set apart from the rest.
Section 1
Section 2: Understanding Your Phone Topics Covered • Features of Your Phone • Front View of Your Phone • Extending and Retracting the Pop-up Display • Internal Antenna • Command Keys • Understanding the Display Screen • Battery Note: Some network-based features described in this user manual may not be available in all coverage areas. For more information, contact your wireless service provider. Section 2: Understanding Your Phone 15 Section 2 This section outlines some key features of your phone.
Features of Your Phone • Domestic and international voice and text messaging service (available on participating networks). • High speed data (CDMA 2000 1x Technology) • Global Positioning (GPS) Technology • 128 x 160 pixel color Liquid Crystal display • PIM functions (Scheduler, To Do List, etc.
Front View of Your Phone Front View of Your Phone SCH-n330 closed view.
SCH-n330 open view.
Extending and Retracting the Pop-up Display Extending and Retracting the Pop-up Display The SCH-n330’s unique pop-up display is designed to provide maximum visual space in a compact phone, as well as, to restrict unwanted dialed calls. With the pop-up display retracted, the keypad is locked. This prevents unwanted dialing of numbers and unwanted turning the phone on and off. Note: You must extend the pop-up display to turn the SCH-n330 on or off.
3. Once the phone is on, you can use the keypad to make and answer calls, to access the menu options of your phone, and to personalize it to fit your needs. 4. To retract the display, gently push the top of the display down until it locks in place. Internal Antenna Section 2 Avoid touching the internal antenna area at the upper rear of your phone while it is powered up.
Command Keys Command Keys Functions for the soft keys are defined by what appears above each in the display. There are two soft keys, the left soft key ( ) and the right soft key ( ). Left soft key Some functions of the left soft key are as follows. • When the left soft key function in the display is Menu, press the Menu (left) soft key ( ) to open the menu list.
Clear key The CLR key ( ) is used to erase or clear numbers, text, or symbols from the display. You can also use to return to a previous menu or to return to standby mode from any menu. 1. If you enter an incorrect character, briefly press backspace (and delete) the character. to 2. To erase the previous word in a sentence, press and hold . 3. To back up one menu level, briefly press . 4. To return to standby mode from any menu, press and hold until you return to standby mode.
Command Keys Send key The Send key ( ) is used to answer calls, dial calls, and to recall the last number(s) dialed, received, or missed. 1. Press once to answer calls. 2. Enter a number and briefly press to make a call. 3. Briefly press in standby mode to display a list of recent calls to and from your phone. 4. Press twice in standby mode to call the most recently dialed number. 5. Press to pick up a waiting call. Press switch back to the other call.
Understanding the Display Screen The top line of the display is reserved for icons that indicate network status, battery power, signal strength, and more. The following icons are some that appear in the display. Display icons Signal strength: Always appears when your phone is on and indicates the current signal strength. More lines indicate a stronger signal. No service indicator: Your phone cannot find a signal because you’re outside a service area. You cannot make or receive calls.
Understanding the Display Screen Voicemail message: Indicates that you’ve received a new voice message. You’re also notified by a visual, audible, and VibeTonz alert according to your assigned preferences. WAP push & Voicemail message: Indicates that you’ve received voice and WAP push messages. You’re also notified by a visual, audible, and VibeTonz alert according to your assigned preferences. WAP push, TXT & Voicemail message: Indicates that you’ve received text, voice, and WAP push messages.
flashes and the phone sounds an alert, which indicates your phone is about to shut down. Alarm clock: The alarm clock is set. Ringer off: Your phones call ringer is turned off. GPS (United States only): Global Positioning Service (GPS) for 911 is set to On for emergency calls only. GPS (United States Only): Global Positioning Service is set to On for location and 911 calls. Silent mode: The ringer is silenced for all alerts, Section 2 incoming calls, and incoming messages.
Understanding the Display Screen Dialogue boxes Dialogue boxes prompt for action, inform you of status, or warn of situations such as low memory. Dialogue boxes and their definitions are outlined below. ICON MESSAGE TYPE EXAMPLE “Save message draft?” Reconfirm Delete all received messages?” Performing “Sending...” “Connecting...
Battery Note: This phone comes packaged with a partially charged rechargeable standard Li-Ion battery and travel adapter. Important: Although the phone can be used while the battery is charging, the battery must be fully charged before first use, otherwise you could damage the battery. 1. Place the battery so it rests in the slot in your phone just below the battery release latch. Section 2 2. Gently slide the battery up until it snaps into place. Remove the battery 1.
Battery Charge the battery Your phone is powered by a rechargeable standard Li-Ion battery. Only use Samsung-approved charging devices and batteries. Samsung accessories are designed to maximize battery life. Caution: Using other, non-Samsung accessories may invalidate your warranty and may cause damage. Use the travel adapter The travel adapter is a convenient, light-weight charger that rapidly charges your phone from any 120/220 VAC outlet. 1.
Battery indicator The battery indicator ( ) in the upper-right corner of the display indicates battery power level. Three bars indicate a full charge, while an empty icon ( ) indicates an almost empty battery. Two to three minutes before the battery becomes too low to operate, a blinking empty battery icon ( ) appears in the display and a tone sounds. Section 2 If you continue to operate the phone without charging, it shuts down.
Section 3: Call Functions Topics Covered • Making a Call • International Calls • Receiving a Call • Adjusting the Call Volume • Call Logs • Phone Modes • Roaming • Voice Dialing This section allows you to make or answer a call. It also includes the features and functionality associated with making or answering a call.
Making a Call 1. With your phone on, extend the pop-up display by simultaneously pressing both pop-up display buttons located on each side of the phone. 2. Enter the number you wish to call using the keypad. 3. Press to place the call. Dialing emergency numbers You can dial any of the numbers 911, *911, #911, 9911, or 1911 to place an emergency call. International Calls Call another country from the U.S. 1. In standby mode, enter the three-digit exit code (011) for the United States. 2.
Receiving a Call Receiving a Call When you receive a call, the phone displays one of the following: • If the caller can be identified, the caller’s number (or name if it’s in your Contacts list) appears in the display. • If the caller can’t be identified, Call from unavailable #, Call from restricted #, or no number appears in the display. Your phone continues to notify you of the call until one of the following events occur: • You press to answer the call. • The calling party ends the call.
Adjusting the Call Volume ■ In standby mode, repeatedly press the volume key ( ) up or down until the desired Calls Level (Silent, 1 Beep, VibeTonz, Level 1-5, Vib+Ring, or Vib&Ring) appears in the display. The volume key is on the left side of phone, next to the SEND key ( ). Call Logs Use Recent Calls to view a list of recently dialed and received calls. Use Calls to view separate lists of all Outgoing, Incoming, and Missed calls for your phone.
Call Logs 2. Press the corresponding number on the keypad to view call logs for the following call types: • • • for Outgoing for Incoming for Missed The selected list of logged calls appears in the display. 3. Use the navigation keys ( ) to select a particular call. 4. Press to view the selected call or press the selected number.
4. Press to display the latest call information for that number. 5. Press the Option (left) soft key ( ). A pop-up menu appears in the display containing the following options: • Talk: Dial the number. • Save: Save the number as a new entry or save the number to an existing entry in your Contacts list. • Prepend: Display the number with the cursor before the first digit. Useful for entering a “1” or area code ahead of the displayed phone number. • Erase: Delete the number from your Calls list. 6.
Call Logs 3. Use the navigation keys to highlight Yes to erase the selected call log, or to highlight No to return to the Erase Logs sub menu. 4. Press to perform your selected function. Call Timers Use the Call Timer sub menu to view various timers for calls made and received from your phone. You can also reset any of your call timers, with the exception of the Lifetime timer. Note: The Lifetime timer retains a log of all calls made since the purchase of your phone and cannot be reset. 1.
Phone Modes Standby mode Standby is the state of the phone once it has obtained service from the network and is idle. The phone goes into standby: • After you power the phone on. • When you press after a call. • Anytime you press while browsing your phone’s menus and sub menus. 1. While in standby mode, enter a phone number, then press to place a call. 2. Press to return to standby mode. Text entry mode Enter content using any of the four text entry modes. 1.
Phone Modes Silent mode Silence the tones your keypad makes whenever you press a key using the Silent Mode feature. Enter Silent mode ■ In standby mode, press and hold . Entering Silent Mode briefly appears in the display and your phone returns to standby mode. Exit silent mode ■ In standby mode, press and hold . Exit Silent Mode briefly appears in the display and your phone returns to standby mode.
Speaker Mode Speaker mode lets you conduct a call without holding the phone to your head. Speaker mode also lets you include other, nearby people in an active call. Enter Speaker Mode ■ While you are in a call, press and hold the Speaker Phone key ( ). The “Speaker Phone On” message and the speaker on icon ( appear in the display. ) Note: You must be involved in an active call on your phone before you attempt to enter Speaker Mode.
Roaming Roaming What is Roaming You can roam (travel outside your designated coverage area) with your phone to other digital networks. The roaming icon appears in the display when roaming is active, and extra charges may apply when making or receiving a call. Note: Some features may be unavailable while roaming. Roaming also consumes additional power from the battery, requiring more frequent charging. Roaming Options Roam Option sets roaming preferences if you move out of your home network.
Change Roaming option To change your Roaming option, follow these steps: 1. In standby mode, press the Menu (left) soft key ( ), then press (Setup), (Network), (Roam Option). 2. Use the navigation key to highlight your roam option preference, then press . Your settings are saved. Note: This feature is only available on the metroPCS network. Voice Dialing The SCH-n330 phone includes voice recognition-based dialing technology.
Voice Dialing Voice dialing commands The Voice Dialing menu, which you can activate by pressing and holding the key, contains the following commands: • Digit Dial—Dials any seven- or ten-digit North American phone number. • Name Dial—Dials a name, if stored in your Contacts list. • Voice Memo—Lets you record a voice memo. • Contacts—Displays your Contacts entries, if any exist. • My phone#—Displays your phone number assigned by metroPCS. To access the Voice Dialing menu, do the following: 1.
Digit Dial Digit Dial lets you dial any valid seven-digit or ten-digit phone number by speaking the number naturally, without pausing between digits. Digit Dial Tips • Digit Dial works best in quieter environments. • When pronouncing a number, speak at a normal speed, saying each digit clearly. There is no need to pause between digits. • Digit Dial recognizes the digits one, two, three, four, five, six, seven, eight, nine, zero, and oh (zero).
Voice Dialing 3. Say the number naturally and clearly. • If the phone asks “Did you say” followed by the correct number, say “Yes.” The phone dials the number. • If the phone asks “Did you say” followed by any incorrect numbers, say “No.” • If there are other choices, the phone prompts you with them next. 4. Use the navigation keys to highlight a number from the list, then press the SEND (left) soft key ( ) or press to dial that number.
2. Say “Name Dial.” The command Name Dial appears on the display and the phone prompts, “Name please” followed by a beep. 3. Say the name of the person you wish to call, exactly as it is entered in your Contacts list. • If Name Dial doesn’t recognize the name, your phone prompts you to repeat the name. • If Name Dial cannot find a match, your phone displays and announces, “Sorry No Match Found.
Voice Dialing Dialing command menu appears in the display, and the phone prompts, “Say a command” followed by a single beep. 2. Say “Voice Memo.” Recording appears on the display and the phone prompts, “Please record after the beep” followed by a beep. 3. Wait for the beep, then start speaking. As it is recording, the phone displays the elapsed time. 4. Press the Stop (right) soft key ( ) when you’re finished recording. A pop-up menu appears on the display with Save highlighted. 5.
2. Say “Contacts.” Contacts appears on the display, and the phone prompts, “Name Please” followed by a beep. 3. Say the name of the Contacts list entry you want to view exactly as it is entered in your Contacts list. • If your phone doesn’t recognize the name, it prompts you to repeat the name. If your phone cannot find a match, it displays and announces, “Sorry No Match Found.” • When your phone recognizes a match, it repeats the name and displays the information for the contact you requested.
Section 4: Menu Navigation Section 4 Topics Covered • Menu Navigation • Menu Outline This section explains the menu navigation for your phone. It also includes an outline of all the available menus associated with your phone.
Section 4 Menu Navigation Access menus using the navigation key in tandem with the two soft keys ( ), or use a shortcut. 1. In standby mode press the Menu (left) soft key ( first of several menus appear in the display. ). The 2. Use the navigation keys to browse phone menus. 3. Press to enter the menu or sub menu presently appearing in the display. Return to the previous menu 1. Press the Back (right) soft key ( previous menu. to return to the 2.
Menu Navigation Navigation Key shortcuts The In-Use Option Access numerous menus and features even while in a call. Note: If the call is disconnected while accessing the In-Use Option, the InUse Option disappears from the display and the phone eventually returns to standby mode. 1. While in a call, press the Menu (left) soft key ( ). The following In-Use menu items appear in the display. • Calls: Displays your recent incoming, outgoing, and missed calls.
• Location: Changes the GPS setting to Location On or 911 Only. Section 4 • Version: Lets you view the software and hardware version information for your phone. 2. If you press the Msg (right) soft key ( ) in while in a call, the following Messages menu items appear in the display: • Send New Msg: Lets you compose and send a text message. • Voice Mail: Lets you view information about your received voice mail messages. • Inbox: Lets you view information about and review your received text messages.
Menu Outline Menu Outline 1 My Metro 1.1 1.2 1.3 Monthly Bill MetroConnect MetroPCS Card 1.3.1 Request Balance 1.3.2 Pay Monthly Bill 1.3.2.1 1.3.2.2 1.3.2.3 2 Contacts 2.1 2.2 2.3 2.4 2.5 3 Credit Card MetroPCS Card Other Options Find Add Rename Group My Phone# Memory Messages 3.1 3.2 3.3 Send New Msg Voice Mail Inbox Section 4: Menu Navigation 53 Section 4 Use the menu shortcuts on the following pages to quickly access menus and sub menus.
Section 4 3.4 3.5 3.6 3.7 3.8 Outbox Draft Saved Wap Push Msg Setting 3.8.1 Send Setting 3.8.1.1 3.8.1.2 3.8.1.3 3.8.1.4 3.8.1.5 SaveInOutbox Callback # Entry Mode Insert Sign. Delivery Ack 3.8.2 Msg. Alert 3.8.2.1 3.8.2.2 3.8.2.3 3.9 54 Vol./VibeTonz Type 3.8.2.2.1 Voice Mail 3.8.2.2.2 Page 3.8.2.2.3 Text 3.8.2.2.4 Wap Push Reminder 3.8.3 Auto Play 3.8.4 Auto View 3.8.5 Auto Erase 3.8.6 Block/Unblock 3.8.7 Quick Text 3.8.8 Signature 3.8.9 Voice Mail # Erase Msg 3.9.1 Voice 3.9.
Menu Outline 4 Mobile Web 4.1 5 Outbox Draft Saved All Messages Section 4 3.9.3 3.9.4 3.9.5 3.9.6 Get In Web Calls 5.1 5.2 5.3 5.4 5.5 5.6 Outgoing Incoming Missed Erase Logs 5.4.1 Outgoing 5.4.2 Incoming 5.4.3 Missed 5.4.4 All Calls Call Timer 5.5.1 Last Call 5.5.2 Total 5.5.3 LifeTime 5.5.4 Erase Total Data Counter 5.6.1 Transmit 5.6.2 Received 5.6.3 Total 5.6.
6 @metro Section 4 6.1 7 Sounds 7.1 7.2 7.3 7.4 7.5 7.6 56 @metro Vol./VibeTonz 7.1.1 Calls 7.1.2 Alarm Ringer Type 7.2.1 Calls 7.2.2 Alarm 7.2.3 Data 7.2.4 Planner Key Beep 7.3.1 Volume 7.3.2 Tone Length 7.3.3 VibeTonz Alerts 7.4.1 Minute Beep 7.4.2 Service 7.4.3 Connect 7.4.4 Disconnect 7.4.5 Fade 7.4.6 Roam 7.4.
Menu Outline 8 Tools 8.1 8.1.1.1 8.1.1.2 8.1.1.3 Section 4 Voice Kit 8.1.1 Voice Memo Record Review Erase All 8.1.2 Voice Setup 8.1.2.1 8.1.2.2 8.2 8.3 8.4 8.5 8.6 8.7 8.8 8.9 8.0 9 Set Active Set Digits 8.1.2.2.1 8.1.2.2.2 Adapt Digits Reset Digits Today Scheduler Jump To Date To Do List Memo Pad Count Down Alarm Clock World Time Calculator Setup 9.1 9.2 9.3 Location Network 9.2.1 Set NAM 9.2.2 Roam Option Data 9.3.
Section 4 9.4 9.3.2 Baud Rate Security 9.4.1 Lock Phone 9.4.2 Change Lock 9.4.3 Emergency # 9.4.4 Voice Privacy 9.4.5 Restriction 9.4.5.1 9.4.5.2 9.4.5.3 9.5 Outgoing Incoming Contacts 9.4.6 Erase Memory 9.4.7 Reset Phone Display 9.5.1 Menu Style 9.5.2 Animation 9.5.2.1 9.5.2.2 9.5.2.3 Opening Closing Wallpaper 9.5.3 Banner 9.5.4 Backlight 9.5.4.1 9.5.4.2 9.5.4.3 9.6 58 9.5.5 9.5.6 9.5.7 Others 9.6.1 9.6.
Menu Outline Section 4: Menu Navigation Section 4 9.7 9.6.3 Call End 9.6.4 Auto Retry 9.6.5 Language 9.6.
Section 4
Section 5: Entering Text Topics Covered • Changing the Text Entry Mode • Using T9 Mode • Entering Text in ABC Mode • Entering Symbols Section 5 • Entering Numbers This section outlines how to select the desired text input mode when entering characters into your phone (for example: contact names and e-mail addresses, text messages, and memos). This section also describes how to use the T9 predictive text entry system to reduce the number of key strokes associated with entering text.
Changing the Text Entry Mode You can use the keys on your phone to enter text composed of alphabetical characters, symbols, and numbers. This is made possible by changing sets of characters the keys enter or the method of entry. Each character set or entry method (symbol, number, etc.) is called a text entry mode. Your phone provides the following four text entry modes: • ABC—Alphabetical text entry mode.
Changing the Text Entry Mode Change text entry modes 1. While composing a text message, press the Option (left) soft key ( ) to display a pop-up menu containing the following options: • T9 WORD / ABC / Symbol / 123 • Quick Text ABC is highlighted. 2. Use the left or right navigation key to choose display the text entry mode you want to use. . The mode is changed. Enter upper and lower case text 1.
Using T9 Mode The T9 Word predictive text entry mode lets you enter words easily by pressing a minimum number of keys. As you press each key, the phone selects a letter that makes up the word it thinks you are typing, based on a built-in dictionary. As you press additional keys, the phone enters letters and the word changes based on the keys you press. Section 5 Note: T9 Word is the factory-set default text entry mode for messages. You can reset this default value to ABC, if you want.
Using T9 Mode For example, to enter a word using T9 predictive text, follow these steps: 1. In standby mode, press the Menu (left) soft key ( ), then press (Messages) and (Send New Msg) to compose a new text message. 2. Enter the phone number of the recipient, then press . The Messages text entry screen appears in the display. • T9 WORD / ABC / Symbol / 123 • Quick Text ABC is highlighted. Use the left and right navigation keys to display T9 WORD, then press . 4.
Entering Text in ABC Mode In ABC mode, you enter text characters by pressing the key with the letter you want printed on it, such as the key for the letter “H”. • Press a key once to enter the first letter printed on that key, such as press the key once to enter the letter “G”. • Press the key repeatedly until the desired character appears in the display, such as press the “H”.
Entering Numbers • Quick Text T9 WORD or ABC is highlighted. 4. Use the left and right navigation keys to display Symbol, then press . The first of four screens of symbols appear in the display. 5. Use the left and right navigation keys to page through the other symbols, if necessary. The symbol you selected appears in the text and the text input mode automatically returns to T9 WORD or ABC. 7. Repeat steps 3 through 6 to insert as many symbols into your message as needed.
3. Press the Option (left) soft key ( ). A pop-up menu containing the following options appears in the display: • T9 WORD / ABC / Symbol / 123 • Quick Text T9 WORD or ABC is highlighted. Section 5 4. Use the left and right navigation keys to display 123, then press . The text entry mode (shown in the lower right hand corner) changes to 123. 5. Press the key(s) for the number(s) (1 through 0) you want to insert in your message. To resume entering letters: 1. Press Option (left) soft key ( ).
Section 6: Understanding Your Contacts List Topics Covered • Your Contacts List • Adding a New Contacts List Entry • Finding a Contacts List Entry • Editing an Existing Contacts List Entry • Deleting a Contacts List Entry • Finding My Phone Number • Speed Dialing • Memory Section 6: Understanding Your Contacts List 69 Section 6 This section provides explanations and procedures for managing your daily contacts by storing their names and numbers in your Contacts list.
Your Contacts List Your Contacts list can store up to 500 numbers, with each contact having up to five associated phone numbers, an email address, and a picture ID. Each phone number can be up to 32 digits in length, including hard pauses. Contact names can be up to 22 characters in length. You can also specify a memory location for each entry, and you can restrict access to the Contacts list to prevent unauthorized use.
Adding a New Contacts List Entry Tip: You can also access a sub menu or menu option by pressing the number key corresponds to the menu item number. For example, press for Add. Adding a New Contacts List Entry You can add Contact entries to your Contacts list by using the Contacts menu, at the end of a call, by Direct Entry, and by using the Call Logs,. Contacts Menu Method 1. In standby mode, press the Menu (left) soft key ( ), then press for Contacts and for Add.
4. With New Entry highlighted, press . The Select Type screen containing the following (number type) icons appears in the display: Home Office Pager Fax Mobile 5. Use the navigation keys to highlight the number type that matches your new entry and press . The Contacts information screen appears in the display with the Name field highlighted. Section 6 6.
Adding a New Contacts List Entry 2. Press the Save (right) soft key ( ). You’re prompted to confirm this as a New Entry, or to Find a name in your Contacts with which to associate the number. 3. Follow the instructions in the upcoming sections depending on whether the number is a new entry or is one you want to add to an existing Contact. Add a New Contact Entry 1. With the New Entry option highlighted, press following number types appear in the display: Home Office Pager Fax . The Mobile 3.
3. Enter information to find the entry, or use the navigation keys to scroll the list and highlight the desired entry, then press . The following number types appear in the display: Home Office Pager Fax Mobile 4. Use the navigation keys to highlight the number type that matches the number you are adding, then press . The Contacts screen appears in the display containing information about the selected Contact, including the new number. Section 6 5. Press again.
Adding a New Contacts List Entry Call Logs Method You can use call history log entries to create Contacts or to add numbers to existing Contacts. 1. In standby mode, press the Menu (left) soft key ( ), then press for Calls. The Calls menu appears in the display. 2. From the Calls menu, press the corresponding number on the keypad to view call logs for the following call types: • • • for Outgoing for Incoming for Missed The selected list of logged calls appears in the display. 3.
6. Add the number as a New Entry (see "Add a New Contact Entry" on page 73), or use Find to add the number to a existing Contact (see "Add to an Existing Contact Entry" on page 73). Finding a Contacts List Entry After you store an entry in your Contacts list, Find allows you to locate that entry quickly by entry name, entry number, or group name. Open the Find screen 1. In standby mode, press the Contacts (right) soft key ( ).
Finding a Contacts List Entry As you enter letters, the entry names and numbers of the closest matches appear in the display. 3. When the desired Contact appears in the display, highlight the entry using the navigation keys (if necessary). 4. To dial the number associated with the selected Contact, press the key. 5. To view the information for the selected Contact, press . Find by Entry Use this option to find a stored Contact by its location (entry) number. 1.
Find by Group This option lets you to find a Contact within a selected group. 1. In the Find screen, use the left and right navigation keys to select By Group. 2. Press the down navigation key briefly to highlight the group name field. 3. Use the left and right navigation keys to view the group that you want. As each group is selected, Contacts assigned to the group appear in your phone’s screen. 4. Use the navigation keys to highlight the desired entry. 5.
Editing an Existing Contacts List Entry 2. Use the left and right navigation keys to select one of the following methods to find the entry: • By Name—Search the Contacts alphabetically by name. • By Entry—Search the Contacts by entry number. • By Group—Search the Contacts by selecting from one of the five available groups. 3. Use the left and right navigation keys to display the search method that you want to use (By Name, By Entry, or By Group). 4.
10. Use the navigation keys and press the individual digits. key to delete 11. When you’re finished editing the Contact number(s), press . Your changes are saved and a confirmation message appears in the display. Add Pauses to Contact Numbers When you call automated systems (like banking services), you are often required to enter a password or account number. Instead of manually entering the numbers each time, you can store the numbers in your Contacts list along with special characters called pauses.
Editing an Existing Contacts List Entry P pause is highlighted. 3. Use the navigation keys to highlight the pause option of your choice. 4. Press to add/insert the highlighted pause into your number sequence. 5. When you’re finished entering the number and pauses, press the Save (right) soft key ( ) to store the number in your Contacts list (see "Add a New Contact Entry" on page 73 or see "Add to an Existing Contact Entry" on page 73 for more information). Pause Dialing Within Contact Numbers 1.
Rename Groups Use this option to rename a group in your Contacts list. 1. In standby mode, press the Menu (left) soft key ( then press and for Rename Group. ), 2. Use the navigation keys to highlight the group that you want to rename, then press . The Rename Group screen appears in the display containing the current name of the group with a flashing cursor at the end of the name. 3.
Editing an Existing Contacts List Entry Edit an E-mail Address 1. In standby mode, press the Contacts (right) soft key ( ). The Find screen appears in the display with By Name selected, your Contact entries sorted alphabetically, and the top entry highlighted. 2. Use the left and right navigation keys to select one of the following methods to find the entry: • By Name—Search the Contacts alphabetically by name. • By Entry—Search the Contacts by entry number.
8. Use the keypad to edit the e-mail address. 9. Press the key twice to insert the @ symbol. 10. To add a domain type press the Option left soft key ( ). A pop-up menu containing the following options appears in the display: • 123 / T9 WORD / ABC / Symbol (with 123 highlighted) • .com / .edu / .net (with .com showing) 11. Use the up and down navigation keys to highlight .com. 12. Use the left and right navigation keys to highlight the desired domain type (.com, .edu, .net), then press .
Deleting a Contacts List Entry Deleting a Contacts List Entry 1. In standby mode, press the Contacts (right) soft key ( ). The Find screen appears in the display with By Name selected, your Contact entries sorted alphabetically, and the top entry highlighted. 2. Use the left and right navigation keys to select one of the following methods to find the entry to be deleted: • By Name—Search the Contacts alphabetically by name. • By Entry—Search the Contacts by entry number.
Finding My Phone Number My Phone# displays the ten-digit number assigned to your phone by metroPCS. ■ In standby mode, press the Menu (left) soft key ( ), then press and for My Phone#. The phone number assigned by metroPCS appears in the display. Speed Dialing Contact entries are assigned an entry numbers between 2 and 500. These entry numbers are assigned automatically when you create Contact entries.
Speed Dialing alphabetically, and the top entry highlighted. 2. Use the left and right navigation keys to select one of the following methods to find the entry to be changed: • By Name—Search the Contacts alphabetically by name. • By Entry—Search the Contacts by entry number. • By Group—Search the Contacts by selecting from one of the five available groups. 3. Use the left and right navigation keys to display the search method that you want to use (By Name, By Entry, or By Group). 4.
One-touch Dialing Contacts memory locations 001 through 009 are special One-Touch dialing locations. You can call the phone numbers stored in memory locations 001 through 009 by pressing and holding a single key. For example, for location number 001 (Voice Mail), press and hold until “Voice Mail” and the number appear in the display and the number is dialed. Two-touch Dialing Section 6 Contacts memory locations 010 through 099 are special Two-Touch dialing locations.
Memory Memory The Memory menu option lets you view the amount of memory you have used to store Contact entries, as well as the memory remaining to store more Contact entries. ■ In standby mode, press the Menu (left) soft key ( ), then press and . The amount of memory used and remaining for Contacts is displayed.
Section 6
Section 7: @metro Topics Covered • @metro Catalog • Settings • Help This section provides explanations of how you can use @metro on your phone to do the following: • Download full featured applications over the air including games, personalized ring tones, pictures, and more; and • Browse the web to catch up on all the latest news.
@metro Catalog 1. In standby mode, press the right navigation key (@). The @metro menu containing the following icons appears in the display: @metro Access @metro catalog. Settings View and change @metro settings. Help The @metro icon ( View @metro tutorials. ) is highlighted. 2. Press .
Settings Settings Use the Settings menu within @metro to manage, move, order applications, and much more. 1. In standby mode, press the right navigation key (@). The @metro menu containing the following icons appears in the display: @metro Access @metro catalog. Settings View and change @metro settings. Help The @metro icon ( View @metro tutorials. ) is highlighted. 2. Use the navigation keys to highlight the Settings icon ( ), then press . The options listed in the following table appear in the display.
Help The Help menu within @metro lists short tutorials on several @metro features. View information about charges, cancelling subscriptions, buying apps, disabling apps, and more. 1. In standby mode, press the right navigation key (@). The @metro menu containing the following icons appears in the display: @metro Access @metro catalog. Settings View and change @metro settings. Help The @metro icon ( View @metro tutorials. ) is highlighted. 2.
Help you use apps that require network connections, such as downloading information and sending TXT messages. Charges Charges will apply for network connections. A network connection is used when you are browsing the @metro Shop, downloading and restoring apps, or cancelling subscription apps. Charges will also apply when you use apps that require network connections, such as downloading information and sending TXT messages.
Disabled Apps You can install new apps if the memory of your phone is full by partially removing (disabling) apps you haven’t used recently. Note: When you need to use a disabled app, you can restore it at no additional purchase cost. Restoring Apps Disabled apps can be quickly restored at no additional purchase cost. To restore an app, run the application you want to restore from the Main Menu. You will be guided through the restoration process.
Section 8: MyMetro Section 8 Topics Covered • Monthly Bill • MetroConnect • MetroPCS Card This section explains how you can use MyMetro on your SCH-n330 phone to view and pay your monthly metroPCS bill(s) on-line or make other payment arrangements.
Section 8 Monthly Bill The Monthly Bill option lets you review your monthly metroPCS bill. 1. In standby mode, press the Menu (left) soft key ( ), then press or press for MyMetro. The following MyMetro menu options appear in the display: • Monthly Bill—View your current monthly bill. • MetroConnect—View the current balance of your account. • MetroPCS Card—View and pay the current balance of your account or make payment arrangements. The Monthly Bill option is highlighted. 2. Press .
MetroPCS Card 2. Use the navigation keys to highlight the MetroConnect option. MetroPCS Card The MetroPCS Card sub menu contains options that let you review and pay the current balance for your account. 1. In standby mode, press the Menu (left) soft key ( ), then press or press for MyMetro. The following MyMetro menu options appear in the display: • Monthly Bill—View your current monthly bill. • MetroConnect—View the current balance of your account.
Section 8 Request Balance The Request Balance option lets you review the current balance of your account before making a payment. ■ At the MetroPCS Card menu, press to select the Request Balance option. Your current account balance appears in the display. Pay Monthly Bill The Pay Monthly Bill option lets you pay the current balance of your account on-line or make other payment arrangements. 1. At the MetroPCS Card menu, use the navigation keys to highlight the Pay Monthly Bill option. 2. Press .
Section 9: Mobile Web Topics Covered • Mobile Web Operations • Launch Mobile Web • Exit Mobile Web • Navigate the Web Section 9 • Mobile Web Soft Keys • Using Links • How Mobile Web Keys Work This section explains how you can use Mobile Web 2.0 on your SCH-n330 phone to conveniently surf the web.
Mobile Web Operations • Each time you launch Mobile Web, your phone connects to the Internet and the service indicator icon ( display. ) appears in the • Mobile Web ends your Internet connection after a certain Section 9 period of inactivity; however, some information from your session remains stored in the phone (while your phone turned on).
Navigate the Web Navigate the Web When you use Mobile Web, some of the keys operate differently than during a normal phone call. Mobile Web presents on-screen items in any of the following ways: • Text or numeric input • Links (embedded in content) • Numbered options (some may not be numbered) • Simple text Mobile Web Soft Keys At the bottom of the Mobile Web display is a bar that contains browser commands.
How Mobile Web keys work The following table lists Mobile Web keys and their functions. Key Name Function Navigation Keys Use to browse lists and options. Section 9 CLR Key A browser back-up key. Press once to back up one page. Press and hold to display your home page. Press to clear the last number, letter, or symbol entered. Press and hold to completely clear the display. Asterisk/Shift Key Press before entering text to enable upper case characters (in Abc mode).
How Mobile Web keys work Key Name Function Right Soft Key Press to activate the command that appears above it in the display. Send Key Press to dial a highlighted number.
Section 9
Section 10: Messages Topics Covered • Send Text Messages • Retrieving New Messages • Voice Mail • Message Folders • Messages Settings • Erase Messages Section 10: Messages 107 Section 10 This section explains how to use your phone to send or receive different types of messages. This section also describes the features and functionality associated with messaging.
Send Text Messages You can use your SCH-n330 phone to send text messages to, and receive text messages from, compatible phones and other devices. You can use the various text entry modes your phone provides to compose your messages. See "Section 5: Entering Text" on page 61 for more information about these text entry modes. Note: A text message can contain a maximum of 160 characters.
Send Text Messages 4. Once you’re finished entering your message, press The New Message menu containing the following options appears in the display: . • Edit Send To—Edit the recipient’s Send To number. • Edit Text—Edit the content of your message. You also have text input options and the option to add Quick Text to your message. • Send Options—Choose the Priority, Privacy, whether you want to have a Delivery Acknowledgement, and insert a Signature and/or Call Back #.
Message send options You can set message priority, privacy, and other options before you send a message. 1. After you’ve composed a message and pressed you’re returned to the New Message menu. , 2. Use the navigation key to highlight Send Options, then press . The Send Options menu containing the following options appears in the display: • Priority—Assign a priority to your message. • Privacy—Choose the desired level of privacy for your message.
Retrieving New Messages Retrieving New Messages When your phone receives a message in standby mode, a ringer sounds (unless turned off), and New Message appears in the display along with the closed envelope icon ( ). The date and time of the message also appear in the display. • Press the Ignore (left) soft key ( ) to return your phone to standby mode. The message is saved to your inbox where you can view it later. • Press the View (right) soft key ( ) to open the message.
Messages and lock mode Your phone still receives messages while in Lock Mode. The time and date of the message appear in the, but you cannot save or open the message until you unlock your phone by doing the following: 1. Press the Unlock (left) soft key ( appears in the display. ). The Lock pop-up 2. Enter the lock code. The Lock pop-up disappears and you can now save or open the message. Note: See "Lock Phone" on page 161 for more information about your phone’s Lock Mode.
Message Folders Message Folders Your messages are stored in one of six folders. Your phone shares its available memory among all messages in these folders. This lets you store up to 100 incoming and 100 outgoing messages, for all folders. The exact number of messages that you can store depends upon message length. Voice mail folder Messages in your Voice Mail box are logged in the Voice Mail folder of the Messages menu.
Note: The following icons, which appear to the left of each message, indicate the status of each incoming message: Text message, unread. Text message, read. Note: Press the View (right) soft key ( message. ) while in a call to view a new 2. Use the navigation key to highlight the message that you want to view. 3. Press to view contents of the highlighted message. 4. While viewing your message, press the Option (left) soft key ( ).
Message Folders Outbox folder Your phone stores outgoing TXT messages and e-mail in the Outbox folder, regardless of whether the message was successfully transmitted. You can also verify if a message was successfully transmitted, and at what date and time by enabling the Delivery Ack feature. See "Message send options" on page 110 for more information on delivery acknowledgements. Review messages in the Outbox 1. In standby mode, press the Menu (left) soft key ( ), then press and to open the Outbox folder.
3. Press the Option (left) soft key ( options appear in the display: ). The following • Re-send—Re-send the message. • Save Msg—Save the message to the Saved folder. • Erase—Delete the message. 4. Use the navigation keys to highlight the option you want, then press to select the option. Draft folder Draft messages have been composed but haven’t been sent yet. You can return to the Draft folder at any time to view, edit, or send a draft message. Create a draft txt message 1.
Message Folders 3. Press the Option (left) soft key ( ). A pop-up menu containing the following options appear in the display with Edit highlighted: • Edit—Opens the New Message menu to change, save, or send the highlighted message • Erase—Erases the highlighted draft message 4. Press to select Edit. The following options appear in the display: • Edit Send To—Edit the recipient’s Send To number. • Edit Text—Edit the content of your message. You also have 5.
2. Use the navigation keys to highlight the message you want to view, then press . 3. Press the Option (left) soft key ( ) to display the message options Edit and Erase. 4. Use the navigation keys to highlight the option you want, then press to select the option. WAP push folder Occasionally, metroPCS may send notifications to your phone in the form of WAP Push alerts. These alerts may contain information on new services or updates.
Messages Settings Messages Settings The Msg Setting folder allows you to define numerous message settings such as ringer types and save options. 1. In standby mode, press the Menu (left) soft key ( ), then press and . The following Msg Setting options appear in the display: • Send Setting—Options to Save in Outbox, change the • • • • • • • 2. Use the navigation keys to highlight the option or sub menu you want. 3. Press , then select and change the current settings.
Erase Messages Use Erase Msg to erase all of the messages in a particular folder, or use the All Messages option to erase the contents of all of your message folders at once. Note: Erase Msg erases all of the messages in the selected folder. To delete a single message, press the Option (left) soft key ( ) and select Erase while viewing the content of a message. 1. In standby mode, press the Menu (left) soft key ( then press and . The Erase Msg menu appears in the display. ), 2.
Section 11: Sounds Topics Covered • Volume/VibeTonz • Ringer Type • Key Beep • Alerts • Power On/Off • Roam Ringer This section explains how you can customize your phone’s ring tones, keypad tones, alerts, shut down sounds, and more.
Volume/VibeTonz The VibeTonz™ system brings the powerful sensation and realism of touch to your SCH-n330 handset, dramatically enhancing the quality of your communication experience. By providing the VT technology high fidelity touch sensations, the VibeTonz system allows you to interact with your phone in a way that fits your personal taste and lifestyle. Ringers enhanced by VibeTonz technology include a track of touch sensations synchronized to the music, making them more fun and more identifiable.
Ringer Type • Vib&Ring—Plays VibeTonz touch sensations synchronized with audio track. 4. Press to save the setting. Ringer Type The Ringer Type menu allows you to set a unique ring for voice calls, messages, data/fax, alarms, and Tools alerts. As you change a ringer type, it plays so you can preview it. 1. In standby mode, press the Menu (left) soft key ( ), then press (Sounds) and for the Ringer Type sub menu. The following ringer types appear in the display: • • • • Calls Alarm Data Planner 2.
4. When the desired ringer type plays, press setting. to save the Key Beep Use the Key Beep menu to adjust the tone volume and the type of tone that your keypad generates when you press a key. Key Beep Volume 1. In standby mode, press the Menu (left) soft key ( ), then press (Sounds) and for Key Beep. The following Key Beep menu items appear in the display: • Volume • Tone Length • VibeTonz Volume is highlighted. 2. Press . 3.
Key Beep Key Beep Tone Length 1. While in the Key Beep menu, use the navigation keys to highlight Tone Length, then press . 2. Use the navigation keys to highlight Long or Normal. 3. Press to save your settings. VibeTonz This allows you to set your phone’s keypad to generate a brief touch sensation as each key is pressed. 1. While in the Key Beep menu, use the navigation keys to highlight VibeTonz, then press . A prompt containing On and Off options appears in the display. 2.
Alerts You can set your phone to sound an alert whenever you enter or leave your service area, connect or disconnect a call, as well as other options. 1. In standby mode, press the Menu (left) soft key ( then press (Sounds) and for Alerts. ), The following Alerts menu items appear in the display: • Minute Beep—Sound an alert ten seconds before each • • • • • • elapsed minute of a call. Service—Sound an alert when you enter or leave your service provider’s coverage area.
Power On/Off Power On/Off Set your phone to play a sound and/or VibeTonz touch sensation whenever you turn the phone on or off. 1. In standby mode, press the Menu (left) soft key ( ), then press (Sounds) and for Power On/Off. The following options appear in the display: • • • • Off Sound Only VibeTonz Only Sound+VibeTonz 2. Use the navigation keys to highlight the option you want, then press . Roam Ringer Set your phone to sound a unique tone when a call is received outside your home service area.
Section 11
Section 12: Tools Section 12 Topics Covered • Voice Kit • Today • Scheduler • Jump To Date • To Do List • Memo Pad • Count Down • Alarm Clock • World Time • Calculator This details how you can keep a schedule of events, set reminders, create a to do list, perform calculations, and more with the digital assistant functionality included in your phone.
Section 12 Voice Kit The Voice Kit lets you record and review voice memos and lets you setup your phone’s Voice Dialing function. Voice Memo You can use the Voice Kit feature to record a memo, or you can select the Voice Memo menu to record a memo for later playback. Note: The maximum number of voice memos is 10. Record a Voice Memo 1. In standby mode, press the Menu (left) soft key ( ), then press (Tools), (Voice Kit) and for Voice Memo.
Voice Kit • Save—Save the memo in the Review folder under the Voice Memo menu. See "Review a Voice Memo" on page 131 for more information on reviewing voice memos. • Review—Listen to your memo. • Re-record—Record the memo again. • Quit—Cancels the voice memo recording and returns you to the Voice Memo menu. The Save option is highlighted. 6. Use the navigation keys to highlight the option you want, then press .
Section 12 2. Use the navigation keys to highlight Review, then press . The Review menu containing a list of your voice memos appears in the display. 3. Use the navigation keys to highlight the memo you want to review. 4. Press to play the memo, or press the Option (left) soft key ( ). A pop-up menu containing the following options appears in the display: • • • • Re-record—Record over the selected memo. Erase—Erase the memo. Edit Caption—Enter a title for your voice memo.
Voice Kit 3. Use the navigation keys to highlight the memo you want to review. 4. Press to play the memo, or press the Option (left) soft key ( ). A pop-up menu containing the following options appears in the display: • • • • Re-record Erase Edit Caption Information 5. Use the navigation keys to highlight Erase, then press . You are asked to confirm erasing this memo. 6. Use the navigation key to highlight Yes to erase the memo, or No to cancel and keep the memo. 7. Press to confirm your selection.
Section 12 2. Use the navigation keys to highlight Erase All, then press . “Erase All Voice Memos?” appears in the display. 3. Use the navigation key to highlight Yes to erase all your voice memos, or No to cancel and keep the memos. 4. Press to confirm your selection. Voice Setup You can use Voice Setup to select how to launch your phone’s Voice Dialing function. Set Active To set the key or action that launches your Voice Dialing, follow these steps. 1.
Voice Kit 3. Use the navigation keys to highlight the option you want, then press to save and exit. Set Digits—Adapt Digits Digit Dial works well for most people without special adaptation. However, if the system is frequently unable to recognize your spoken digits, you should adapt Digit Dial to your voice. Note: After you adapt Digit Dial, your phone is customized to your voice, and your voice only. Others will not be able to use it unless they reset the phone to factory defaults.
Set Digits—Adapt Digit Dial to Your Voice Section 12 1. In standby mode, press the Menu (left) soft key ( then press (Tools), (Voice Kit) and Voice Setup. ), for The Voice Setup menu containing the following options appears in the display: • Set Active • Set Digits 2. Use the navigation keys to highlight Set Digits, then press . The Setup Digit menu containing the following options appears in the display: • Adapt Digits • Reset Digits 3. Use the navigation keys to highlight Adapt Digits, then press .
Voice Kit 6. After six sets of digits, the phone asks whether you want to do more adaptation. Answer “Yes.” Reset Digits You can erase a digit adaptation and reset Digit Dial to its original state. 1. In standby mode, press the Menu (left) soft key ( then press (Tools), (Voice Kit) and Voice Setup. ), for The Voice Setup menu containing the following options appears in the display: • Set Active • Set Digits 2. Use the navigation keys to highlight Set Digits, then press .
Section 12 Today You can schedule up to nine events for the current day. Simply indicate each event’s start time and advance notification time. Set alarms for events so that you can be alerted before an event takes place. Events scheduled for future dates automatically appear on your Today events schedule at that future date. (See "Scheduler" on page 142 for more information.) Add a New Event 1. In standby mode, press the Menu (left) soft key ( then press (Tools) and for Today.
Today As needed, press the Option (left) soft key ( change text entry mode. ) to Section 12 3. When you’re finished entering details for the event, press . The Time Setup screen appears in the display. 4. Enter the time and date for the event using the keypad. • Press • Press for A.M. when P is highlighted. for P.M. when A is highlighted. 5. When you’re finished entering the time and date, use the navigation keys to highlight the Notification field. 6.
3. Press the Option (left) soft key ( ). A pop-up menu containing the following options appears in the display: Section 12 • • • • Add new Edit Erase Erase All Add new is highlighted. 4. Use the navigation keys to highlight Edit, then press The Edit Event screen appears in the display. . 5. If needed, change the details of the new event using the keypad (Up to 32 characters). (For details on entering text using the keypad, see "Section 5: Entering Text" on page 61.
Today Erase an Event 1. In standby mode, press the Menu (left) soft key ( then press (Tools) and for Today. ), The Event screen containing information about the earliest event entered or scheduled for today appears in the display. 2. If more than one event is entered or scheduled for today, use the left and right navigation keys to select the event you want to erase. 3. Press the Option (left) soft key ( ).
6. Press to confirm your selection. • If you selected Yes, “Erasing” appears on the display followed Section 12 by the Scheduler screen. (See "Scheduler" on page 142 for more information.) • If you selected No, you are returned to the Event screen. Scheduler Scheduler allows you to view the current, past, or future month in a monthly calendar layout. While viewing the calendar, the current date is highlighted and days with scheduled events are surrounded by a box. View an event 1.
Jump To Date 5. Press . • If one or more events are scheduled for the selected date, the Jump To Date You can to go directly to any date that you specify in the Jump to Date entry screen. 1. In standby mode, press the Menu (left) soft key ( ), then press (Tools) and for Jump To Date. The Jump to Date entry screen appears in the display with the current month highlighted. 2. Enter the desired jump to date and press .
Section 12 To Do List The To Do List allows you to create a task list. You can store, prioritize, and manage up to 20 To Do List tasks. 1. In standby mode, press the Menu (left) soft key ( then press (Tools) and for To Do List. ), If there are no To Do tasks entered for the current date, the Add To Do screen appears in the display. If there are To Do tasks entered for the current date, information about the earliest To Do task appears in the display. Press the Option (left) soft key ( ).
To Do List 6. Enter a time and date for the task using the keypad. 7. Press for A.M. when P is highlighted. for P.M. when A is highlighted. Section 12 • Press • Press to save the task. Add, Edit, or Erase Tasks 1. In standby mode, press the Menu (left) soft key ( then press (Tools) and for To Do List. ), 2. Use the navigation keys to browse tasks in your To Do List. Events are presented in order of priority. 3. Press the Option (left) soft key ( ) while viewing your To Do List.
Section 12 Memo Pad You can create notes and store them in Memo Pad. You can’t prioritize or set an alert for stored notes. Return to Memo Pad anytime you want to review and edit your notes. Add Memo 1. In standby mode, press the Menu (left) soft key ( ), then press (Tools) and for Memo Pad. If you have any stored memos, they appear as a list in the display. If this is your first time in Memo Pad, the Memo screen appears in the display letting you add a new memo. 2. Enter memo details using the keypad.
Memo Pad • Add new—Add a new memo to Memo Pad. • Edit—Edit the memo currently highlighted or appearing in the display. • Erase—Erase the memo currently highlighted or appearing in the display. • Erase All—Erase all memos from Memo Pad. 5. Use the navigation keys to highlight the option you want. 6. Press to select the option. Section 12: Tools 147 Section 12 4. Press the Option (left) soft key ( ) while viewing the memo.
Section 12 Count Down Count Down allows you to view the amount of time between the current date and any event that you want to schedule. You can create up to 20 Count Down events. Add New Count Down Event 1. In standby mode, press the Menu (left) soft key ( ), then press (Tools) and for Count Down. If you have multiple Count Down events, the event that is scheduled closest to the current date appears in the display. 2. Use the navigation keys to browse your Count Down events. 3.
Count Down Review, Add, Edit, and Erase Count Down Events 1. In standby mode, press the Menu (left) soft key ( ), then press (Tools) and for Count Down. The Count Down event scheduled closest to the current date appears first in the display. Event details, including the days, hours, and minutes left until the scheduled event occurs also displays. The day, date, and time of the scheduled event appear at the bottom of the display. 2. Use the navigation keys to browse your Count Down events. 3.
Section 12 Alarm Clock Your phone has an alarm clock that you can set to go off once, or daily at a specified time. Once set, the alarm clock is easy to change or turn off completely. Set Alarm Clock Note: The alarm does not sound when the phone is turned off. If the time for an alarm that was set for Once has elapsed and the phone is off, the alarm sounds at the same time on the following day. 1. In standby mode, press the Menu (left) soft key ( ), then press (Tools) and for Alarm Clock.
Alarm Clock When the Alarm Clock Sounds 1. Press to silence the alarm. If the alarm was set as a Daily alarm, the alarm icon remains in the top of the display. If the alarm was set as a Once only alarm, the alarm icon is removed from the top of the display. Turn Off the Alarm Clock 1. In standby mode, press the Menu (left) soft key ( ), then press (Tools) and for Alarm Clock. The Alarm Set screen containing the following options appears in the display: • Once • Daily • Off Off is highlighted. 2.
Section 12 World Time World Time allows you to view the time of day or night in another part of the world. World Time displays time in the 24 different time zones around the world. 1. In standby mode, press the Menu (left) soft key ( ), then press (Tools) and for World Time. A world map appears in the display. 2. Use the navigation keys to display the city and time that you want to view.
Calculator Calculator 1. In standby mode, press the Menu (left) soft key ( then press (Tools) and for Calculator. ), 2. The Calculator screen appears in the display. 3. Enter the first number in your equation using the keypad (numbers can be up to nine digits long). Press to enter a decimal point. Press to change the sign for a number to a negative. 4. Use the navigation keys to select the type of calculation you want to perform. 5. Press to perform the calculation and view the result.
Section 12
Section 13: Setup Topics Covered • Location • Network • Data • Security Section 13 • Display • Others • Version This section explains how to customize many of your phone’s options to suit your preferences. Using the Setup menu, you can set or change security features, shortcuts, language, and more.
Location Location identifies your location to the network via GPS. You can fully enable this setting or set GPS to work only in the event that you dial 911. Note: Contact metroPCS to determine if, when, or where location-based services are available. 1. In standby mode, press the Menu (left) soft key ( then press (Setup) and for Location. ), Section 13 The following GPS Setting menu options appear in the display: • Location On—GPS location setting is on wherever the feature is available.
Network Network The Network menu allows you to select Roam Option and NAM (Number Assignment Module) settings for your phone. You can change your roaming options or store two NAM settings, which are essentially telephone numbers, for your phone. Set NAM 1. In standby mode, press the Menu (left) soft key ( then press (Setup) and for Network. ), Section 13 The following Network menu items appear in the display: • Set NAM • Roam Option 2. Use the navigation keys to highlight Set NAM, then press .
Roam Option 1. In standby mode, press the Menu (left) soft key ( then press (Setup) and for Network. ), The following Network menu items appear in the display: • Set NAM • Roam Option Section 13 2. Use the navigation keys to highlight Roam Option, then press . The following roaming options appear in the display: • Home only—Roaming is off. • Automatic—Roaming is on. 3. Use the navigation keys and to highlight Home only or Automatic, then press . The Network menu appears in the display.
Data Data Use the Data menu to configure data connection speed and automatic detection settings. Auto Detect Select phone options for receiving data or voice, or set data reception to off. 1. In standby mode, press the Menu (left) soft key ( then press (Setup) and for Data. ), The following Data menu items appear in the display: 2. Use the navigation keys to highlight Auto Detect, then press . The following options appear in the display: • data off—No incoming data calls accepted.
2. Use the navigation keys to highlight Baud Rate, then press . The following Data Baud Rate options appear in the display: • • • • • • Auto 19200 38400 57600 115200 230400 Section 13 3. Use the navigation keys to highlight the desired Data Baud Rate option, the press . The Data menu appears in the display. Security Use the Security menu to lock your phone, set up emergency numbers, enable or disable voice privacy, set restrictions, and more. The Security menu is always locked.
Security Note: The default lock code for your phone is the last four digits of your phone number. The Lock prompt disappears and the Security menu containing the following items appears in the display: • Lock Phone—Lock code required to place calls or access features. • Change Lock—Enter new lock code to access Security • • • 3. Use the navigation keys to highlight a sub menu, then press .
2. Enter the four-digit lock code using the keypad. Note: The default lock code for your phone is the last four digits of your phone number. The Lock prompt disappears and the Security menu appears in the display. Lock Phone is highlighted. 3. Press for Lock Phone. The following Set Lock options appear in the display: Section 13 • Never—The phone remains unlocked. • On Power Up—The phone locks automatically the next time your phone is powered on and stays locked until you enter the lock code.
Security 3. Press for Change Lock. You’re prompted to enter the new lock code. 4. Enter the new lock code. You’re prompted to re-enter the new lock code for verification. 5. Enter the new lock code again. Your changes are stored. Note: Your phone does not allow you to view the lock code for security reasons. If you change the lock code, be sure to write down or memorize the new code. Your phone provides the option of storing three emergency numbers. Each number can be up to 32 digits in length.
Remember to always turn your phone on and check for adequate signal strength before placing a call. Store Emergency Numbers 1. In standby mode, press the Menu (left) soft key ( then press (Setup) and for Security. ), The Lock prompt appears in the display. 2. Enter the four-digit lock code using the keypad. Section 13 Note: The default lock code for your phone is the last four digits of your phone number. The Lock prompt disappears and the Security menu appears in the display. 3.
Security 1. In standby mode, press the Menu (left) soft key ( then press (Setup) and for Security. ), The Lock prompt appears in the display. 2. Enter the four-digit lock code using the keypad. Note: The default lock code for your phone is the last four digits of your phone number. The Lock prompt disappears and the Security menu appears in the display. • Standard—Voice privacy is disabled. • Enhanced—Voice privacy is enabled. 4. Use the navigation keys to highlight the Voice Priv.
3. Press for Restriction. The following options appear in the display: • Outgoing: When set to Yes, outgoing calls are restricted. • Incoming: When set to Yes, incoming calls are restricted. • Contacts: When set to Yes, all access to your Contacts List is restricted (including speed dialing). Note: The default restriction settings are all No. Section 13 4. Use the navigation keys to highlight the Restriction you want, then press .
Security Note: The default lock code for your phone is the last four digits of your phone number. The Lock prompt disappears and the Security menu appears in the display. 3. Press for Erase Memory. A confirmation prompt appears in the display. Reset Phone The Reset Phone feature restores the factory default settings and erases your Call Log, but Today, Countdown, and To Do List remain the same. Note: This cannot be undone after you confirm phone reset. 1.
3. Press for Reset Phone. A prompt appears in the display asking if you want to restore default settings (except for the Contacts). 4. Use the navigation keys to highlight Yes or No, then press . Section 13 Display You can set menu style, standby mode animation, customize backlight settings, and more using the Display menu. Display menu 1. In standby mode, press the Menu (left) soft key ( ), then press (Setup) and for Display.
Display 3. Press to select the menu. The following sections describe the Display options. Menu Style Menu Style allows you to choose how main menus appear in your display when the Menu (left) soft key ( is pressed. ) 1. In standby mode, press the Menu (left) soft key ( ), then press (Setup), (Display), and for Menu Style. The following options appear in the display: 2. Use the navigation keys to highlight the option you want. 3. Press to select the highlighted option.
2. Use the navigation key to highlight the menu you want, then press . A pop-up menu containing the following options appears in the display: • Preloaded—View images included with your phone. • My Image—View images or wallpaper you have downloaded and saved. Section 13 3. Use the navigation key to highlight the sub menu you want, then press . The first in a series of images appears in the display. 4.
Display Backlight You can set the backlight for your display or keypad to remain on for a specified period of time or remain on as long as the slide is up. Note: Prolonged backlight use drains your battery faster. • LCD—Sets the amount of time the backlight for the LCD remains on after a period of inactivity. Optional settings are 5, 10, and 15 seconds as well as Slide Up. • Keypad—Sets the amount of time the backlight for the keypad remains on after a period of inactivity.
Contrast Set the display contrast to your preference. 1. In standby mode, press the Menu (left) soft key ( ), then press (Setup), (Display), and for Contrast. 2. Use the left and right navigation keys to adjust the contrast for the display. 3. Press to exit. Section 13 Auto Hyphen Auto Hyphen automatically hyphenates phone numbers as they are entered. For example: 580-555-0000. 1. In standby mode, press the Menu (left) soft key ( ), then press (Setup), (Display), and for Auto Hyphen.
Others Turn the Service LED off/on 1. In standby mode, press the Menu (left) soft key ( ), then press (Setup), (Display), and for (Service LED). The following options appear in the display: • Off • On 2. Use the navigation key to highlight your preference, then press . Section 13 Others The Others menu contains options for setting Call Answer mode, Language, and other settings.
2. Press for Shortcut. The following applications and functions appear in the display: • • • • • • • Scheduler Voice Memo Animation Ringer Type Alarm Calculator Memo Pad Section 13 3. Use the navigation keys to highlight the function you want the up navigation key to launch, then press . You can now press the navigation up key while in standby mode to launch the function you selected. Call Answer Call Answer lets you select what action(s) you can take to answer an incoming call. 1.
Others 3. Use the navigation keys to highlight the Call Answer option you want to use, then press . Call End Call End lets you set how you will end a call. 1. In standby mode, press the Menu (left) soft key ( ), then press (Setup) and For Others. The Others menu appears in the display. 2. Press for Call End. The following Call End options appear in the display: Section 13 • End Key Only—Press to end a call. • Slide Down—Close the pop-up display to end a call. 3.
3. Use the navigation keys to highlight the setting you want, then press . Language The Language option on your phone changes the language used in voice prompts, menus, and text input. 1. In standby mode, press the Menu (left) soft key ( ), then press (Setup) and For Others. The Others menu appears in the display. Section 13 2. Press for Language.The following Language options appear in the display: • English • Spanish 3. Use the navigation keys to highlight your language preference, then press .
Version 3. Enter the current time and date using your keypad. The hour, minute, month, and day must be entered using two digits each. You must enter the hour in 12-hour format and press for AM or press for PM. The year must be entered with all four digits. 4. Press to save the time and date. Version 1. In standby mode, press the Menu (left) soft key ( then press (Setup) and for Version. ), Your phone’s hardware and software information appears in the display. 2. Press to return to the Setup menu.
Section 13
Section 14: Health and Safety Information Topics Covered • Health and Safety Information This section outlines the safety precautions associated with using your phone. These safety precautions should be followed to safely use your phone.
Health and Safety Information Exposure to Radio Frequency (RF) Signals Certification Information (SAR) Section 14 Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the exposure limits for radio frequency (RF) energy set by the Federal Communications Commission (FCC) of the U.S. government.
Health and Safety Information SAR tests are conducted using standard operating positions accepted by the FCC with the phone transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network.
The FCC has granted an Equipment Authorization for this mobile phone with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. The maximum SAR values for this model phone as reported to the FCC are: • Head:1.26 W/Kg. Section 14 • Body-worn: 1.31 W/Kg. SAR information on this and other model phones can be viewed on-line at www.fcc.gov/oet/fccid.
Consumer Information on Wireless Phones What kinds of phones are the subject of this update? The term wireless phone refers here to hand-held wireless phones with built-in antennas, often called "cell," "mobile," or "PCS" phones. These types of wireless phones can expose the user to measurable radio frequency energy (RF) because of the short distance between the phone and the user's head.
occur, but such findings have not been confirmed by additional research. In some cases, other researchers have had difficulty in reproducing those studies, or in determining the reasons for inconsistent results. What is FDA's role concerning the safety of wireless phones? Section 14 Under the law, FDA does not review the safety of radiation-emitting consumer products such as wireless phones before they can be sold, as it does with new drugs or medical devices.
Consumer Information on Wireless Phones federal level. The following agencies belong to this working group: • "National Institute for Occupational Safety and Health • "Environmental Protection Agency • "Federal Communications Commission • "Occupational Safety and Health Administration • "National Telecommunications and Information Administration The National Institutes of Health participates in some interagency working group activities, as well.
Section 14 exposures characteristic of wireless phones have yielded conflicting results that often cannot be repeated in other laboratories. A few animal studies, however, have suggested that low levels of RF could accelerate the development of cancer in laboratory animals. However, many of the studies that showed increased tumor development used animals that had been genetically engineered or treated with cancer-causing chemicals so as to be pre-disposed to develop cancer in absence of RF exposure.
Consumer Information on Wireless Phones However, very large numbers of animals would be needed to provide reliable proof of a cancer promoting effect if one exists. Epidemiological studies can provide data that is directly applicable to human populations, but ten or more years' follow-up may be needed to provide answers about some health effects, such as cancer.
and Development Agreement (CRADA) to do research on wireless phone safety. FDA provides the scientific oversight, obtaining input from experts in government, industry, and academic organizations. CTIA-funded research is conducted through contracts to independent investigators. The initial research will include both laboratory studies and studies of wireless phone users.
Consumer Information on Wireless Phones What about children using wireless phones? The scientific evidence does not show a danger to users of wireless phones, including children and teenagers. If you want to take steps to lower exposure to radio frequency energy (RF), the measures described above would apply to children and teenagers using wireless phones. Reducing the time of wireless phone use and increasing the distance between the user and the RF source will reduce RF exposure.
marketed in the U.S. are required to meet safety requirements regardless of whether they are used against the head or against the body. Either configuration should result in compliance with the safety limit. Section 14 Do wireless phone accessories that claim to shield the head from RF radiation work? Since there are no known risks from exposure to RF emissions from wireless phones, there is no reason to believe that accessories that claim to shield the head from those emissions reduce risks.
Consumer Information on Wireless Phones pacemakers and defibrillators from wireless telephones. This test method is now part of a standard sponsored by the Association for the Advancement of Medical instrumentation (AAMI). The final draft, a joint effort by FDA, medical device manufacturers, and many other groups, was completed in late 2000. This standard will allow manufacturers to ensure that cardiac pacemakers and defibrillators are safe from wireless phone EMI.
• National institute for Occupational Safety and Health (NIOSH): http://www.cdc.gov/niosh/emfpg.html • World health Organization (WHO): http://www.who.int/peh-emf/ • International Commission on Non-Ionizing Radiation Protection: http://www.icnirp.de • National Radiation Protection Board (UK): http://www.nrpb.org.uk • Updated 4/3/2002: US food and Drug Administration http://www.fda.
Road Safety 3. Position your wireless phone within easy reach. Be able to access your wireless phone without removing your eyes from the road. If you get an incoming call at an inconvenient time, let your voice mail answer it for you. 4. Let the person you are speaking with know you are driving; if necessary, suspend the call in heavy traffic or hazardous weather conditions. Rain, sleet, snow, ice and even heavy traffic can be hazardous. 5. Do not take notes or look up phone numbers while driving.
9. Use your wireless phone to help others in emergencies. If you see an auto accident, crime in progress or other serious emergency where lives are in danger, call 9-1-1 or other local emergency number, as you would want others to do for you. 10. Call roadside assistance or a special non-emergency wireless assistance number when necessary.
Operating Environment Operating Environment Remember to follow any special regulations in force in any area and always switch your phone off whenever it is forbidden to use it, or when it may cause interference or danger. When connecting the phone or any accessory to another device, read its user's guide for detailed safety instructions. Do not connect incompatible products.
These recommendations are consistent with the independent research and recommendations of Wireless Technology Research. Persons with pacemakers: • should always keep the phone more than 15 cm (6 inches) from their pacemaker when the phone is switched on. • should not carry the phone in a breast pocket. • should use the ear opposite the pacemaker to minimize potential interference. If you have any reason to suspect that interference is taking place, switch your phone off immediately.
Potentially Explosive Environments Vehicles RF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles. Check with the manufacturer or its representative regarding your vehicle. You should also consult the manufacturer of any equipment that has been added to your vehicle. Posted Facilities Switch your phone off in any facility where posted notices require you to do so.
Emergency Calls This phone, like any wireless phone, operates using radio signals, wireless and landline networks as well as userprogrammed functions, which cannot guarantee connection in all conditions. Therefore, you should never rely solely on any wireless phone for essential communications (medical emergencies, for example). Remember, to make or receive any calls the phone must be switched on and in a service area with adequate signal strength.
FCC Notice and Cautions Restricting Children's access to your Phone Your phone is not a toy. Children should not be allowed to play with it because they could hurt themselves and others, damage the phone or make calls that increase your phone bill. FCC Notice and Cautions FCC Notice The phone may cause TV or radio interference if used in close proximity to receiving equipment. The FCC can require you to stop using the phone if such interference cannot be eliminated.
Although your phone is quite sturdy, it is a complex piece of equipment and can be broken. Avoid dropping, hitting, bending or sitting on it. Other Important Safety Information • Only qualified personnel should service the phone or install the phone in a vehicle. Faulty installation or service may be dangerous and may invalidate any warranty applicable to the device. • Check regularly that all wireless phone equipment in your vehicle is mounted and operating properly.
Product Performance Product Performance Getting the Most Out of Your Signal Reception The quality of each call you make or receive depends on the signal strength in your area. Your phone informs you of the current signal strength by displaying a number of bars next to the signal strength icon. The more bars displayed, the stronger the signal. If you're inside a building, being near a window may give you better reception.
Maintaining Your Phone's Peak Performance For the best care of your phone, only authorized personnel should service your phone and accessories. Faulty service may void the warranty. There are several simple guidelines to operating your phone properly and maintaining safe, satisfactory service. • Hold the phone with the antenna raised, fully-extended and over your shoulder. • Try not to hold, bend or twist the phone's antenna. • Don't use the phone if the antenna is damaged.
Battery Standby and Talk Time Battery Standby and Talk Time Standby and talk times will vary depending on phone usage patterns and conditions. Battery power consumption depends on factors such as network configuration, signal strength, operating temperature, features selected, frequency of calls, and voice, data, and other application usage patterns. Battery Precautions • Never use any charger or battery that is damaged in any way. • Use the battery only for its intended purpose.
• Do not leave the battery in hot or cold places, such as in a car in summer or winter conditions, as you will reduce the capacity and lifetime of the battery. Always try to keep the battery at room temperature. A phone with a hot or cold battery may temporarily not work, even when the battery is fully charged. Li-ion batteries are particularly affected by temperatures below 0 °C (32 °F). • Do not short-circuit the battery.
Care and Maintenance • Do not store the phone in hot areas. High temperatures can shorten the life of electronic devices, damage batteries, and warp or melt certain plastics. • Do not store the phone in cold areas. When the phone warms up to its normal operating temperature, moisture can form inside the phone, which may damage the phone's electronic circuit boards. • Do not drop, knock or shake the phone. Rough handling can break internal circuit boards.
Section 14
Section 15: Warranty Information Topics Covered • Standard Limited Warranty Section 15 Section 15: Warranty Information 207
Standard Limited Warranty What is Covered and For How Long? SAMSUNG Section 15 TELECOMMUNICATIONS AMERICA, L.P.
Standard Limited Warranty products, or ancillary/peripheral equipment not furnished or approved by SAMSUNG; (e) defects or damage from improper testing, operation, maintenance, installation, or adjustment; (f) installation, maintenance, and service of Product, or (g) Product used or purchased outside the United States or Canada.
replaced leather cases, pouches and holsters will be warranted for a period of ninety (90) days. All other repaired/replaced Product will be warranted for a period equal to the remainder of the original Limited Warranty on the original Product or for 90 days, whichever is longer. All replaced parts, components, boards and equipment shall become the property of SAMSUNG.
Standard Limited Warranty NOTHING CONTAINED IN THE INSTRUCTION MANUAL SHALL BE CONSTRUED TO CREATE AN EXPRESS WARRANTY OF ANY KIND WHATSOEVER WITH RESPECT TO THE PRODUCT. ALL IMPLIED WARRANTIES AND CONDITIONS THAT MAY ARISE BY OPERATION OF LAW, INCLUDING IF APPLICABLE THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY LIMITED TO THE SAME DURATION OF TIME AS THE EXPRESS WRITTEN WARRANTY STATED HEREIN.
Section 15 LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY FROM STATE TO STATE/ PROVINCE TO PROVINCE. THIS LIMITED WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL PURCHASER OF THIS PRODUCT AND STATES PURCHASER'S EXCLUSIVE REMEDY.
Standard Limited Warranty OPERATIONS, PERFORMANCE AND SUITABILITY OF ANY SUCH THIRD-PARTY SOFTWARE OR EQUIPMENT LIE SOLELY WITH THE PURCHASER AND THE DIRECT VENDOR, OWNER OR SUPPLIER OF SUCH THIRD-PARTY SOFTWARE OR EQUIPMENT, AS THE CASE MAY BE. This Limited Warranty allocates risk of Product failure between Purchaser and SAMSUNG, and SAMSUNG's Product pricing reflects this allocation of risk and the limitations of liability contained in this Limited Warranty.
Section 15
Index indicator 30 removing 28 strength icon 25 Symbols C @metro 91 @metro Catalog 92 Calculator 153 Call another country from U.S.
Edit Contact Numbers 78 Editing an Existing Contacts List Entry 78 finding contacts 76 finding contacts by entry number 77 finding contacts by group name 78 finding contacts by name 76 Finding My Phone Number 86 Memory 89 open 70 Rename Groups 82 Selecting SpeedDial Phone Number 86 Speed Dialing 86 Speed Dialing Options 87 Contrast 172 Count Down 148 D Dialing One-touch 88 Three-touch 88 Two-touch 88 Dialogue boxes 27 Display Animation 169 Auto Hyphen 172 Backlight 171 Banner 170 Contrast 172 Display men
battery strength 25 new message 24 no service 24 roaming 24 signal strength 24 VibeTonz mode 25 In-use menu 51 J Jump To Date 143 K Key Beep 124 L Language 176 Left soft key 21 M Memo Pad 146 Menu Navigation 49 Menu Outline 53 Menu shortcuts 50 Menu Style 169 Menu, in-use option 51 Messages 107 Erase Messages 120 Message Folders 113 Voice Mail 112 Messaging Message Settings 119 Retrieving New Messages 111 Send Text Messages 108 MetroConnect 98 MetroPCS Card 99 Mobile Web 101 Launch Mobile Web 102 Mo
Roam Ringer 127 VibeTonz 122 Volume/VibeTonz 122 erase call logs 36 Removing battery 28 Return to last menu 50 Right soft key 21 Ringer off icon 26 Ringer Type 123 Roam Ringer 127 Roaming Definition 41 Options 41 Roaming indicator 24 S Scheduler 142 Send key 23 Service LED 172 off/on 173 Setup 155 Data 159 Location 156 Network 157 Others 173 Version 177 Shortcut 173 Shortcut to menus 50 Signal strength icon 24 Silent mode 39 Silent mode icon 26 Sounds 121 Alerts 126 Key Beep 124 Power On/Off 127 Ringe
Command Keys 21 Display Screen 24 Extend and Retract Popup Display 19 Features of Your Phone 16 Front View of Your Phone 17 Travel Adapter 29 V VibeTonz 122 VibeTonz mode 39 VibeTonz mode icon 25 Voice Dialing 42 commands 43 contacts 47 digit dial 44 my phone# 48 voice memo 46 Voice Kit 42, 130 settings 134 Voice mail listening to 12 Voicemail icons 25 W Warranty Information 207 World Time 152 219
