SCH-a950 Series P O R T A B L E A l l D i g i t a l M o b i l e P h o n e User Guide Please read this manual before operating your phone, and keep it for future reference. YH16.
Intellectual Property All Intellectual Property, as defined below, owned by or which is otherwise the property of Samsung or its respective suppliers relating to the SAMSUNG Phone, including but not limited to, accessories, parts, or software relating there to (the “Phone System”), is proprietary to Samsung and protected under federal laws, state laws, and international treaty provisions.
Licensed by Qualcomm Incorporated under one or more of the following patents: U.S. Patent No. 4, 901, 307; 5, 056, 109; 5, 099, 204; 5, 101, 501; 5, 103, 459; 5, 107, 225; 5, 109, 390. Printed in South Korea GH68-06494A Openwave® is a registered Trademark of Openwave, Inc. RSA® is a registered Trademark RSA Security, Inc.
DAMAGES, OR LOSS OF ANTICIPATED PROFITS OR BENEFITS.
Table of Contents Table of Contents Section 1: Getting Started .................................. 9 Turning Your Phone On and Off ........................................ 10 Setting Up Voicemail ........................................................ 10 Understanding this User Manual ....................................... 11 Section 2: Understanding Your Phone ............. 13 Features of Your Phone .................................................... 14 Front View of Your Phone ........................
Section 6: Understanding Your Contacts ......... 61 Table of Contents Opening Contacts Menu ...................................................62 Adding a Contact ..............................................................63 Adding Pauses .................................................................65 Contact Groups .................................................................65 Finding a Contacts Entry ...................................................69 Editing an Existing Contact Entry .....
Table of Contents Clock Format .................................................................. 113 Ringer ID ........................................................................ 114 Picture ID ....................................................................... 114 Bluetooth Settings .......................................................... 114 Section 9: Multimedia .................................... 119 Get It Now ......................................................................
Table of Contents Potentially Explosive Environments .................................173 Emergency Calls .............................................................174 FCC Notice and Cautions ................................................175 Other Important Safety Information .................................176 Product Performance ......................................................177 Availability of Various Features/Ring Tones .....................178 Battery Standby and Talk Time ...............
Section 1: Getting Started Topics Covered • Turning Your Phone On and Off • Setting Up Voicemail • Understanding this User Manual Section 1: Getting Started Section 1 This section allows you to start using your phone by activating your service, setting up your voicemail, contacting customer support, or getting an understanding of how this manual is put together.
Turning Your Phone On and Off Turning Your Phone On 1. Open the flip, then press . Note: As with any other radio-transmitting device, do not touch the internal antenna as it affects call quality and may cause the phone to operate at a higher power level than is necessary. The internal antenna is located along the top on the back side of your phone. Section 1 2. Your service provider’s name momentarily appears in the display and the phone begins searching for a network signal. 3.
Understanding this User Manual Voicemail Setup 1. In standby mode, press and hold the Voicemail displays. key. Calling 2. Press again, then enter your own mobile number and press to dial voicemail. 3. Press to interrupt the greeting. 4. Follow the prompts in the new user tutorial to setup your mailbox. Listen to Voicemail 2. You are then prompted to enter your password followed by .
define terms, and more. The definitions for these methods are as follows: • Notes: Explain alternative options within the current feature, menu, or sub-menu. • Tips: Provide quick or innovative methods for performing functions related to the subject at hand. • Important: Points out important information about the current Section 1 feature that could affect performance, or even damage your phone.
Section 2: Understanding Your Phone Topics Covered • Features of Your Phone • Front View of Your Phone • Command Keys • Understanding the Display Screen • Battery • Removable Memory Card Storage • Phone Memory Storage Section 2: Understanding Your Phone 13 Section 2 This section outlines some key features of your phone. It also displays the screen and the icons that are displayed when the phone is in use.
Features of Your Phone • Domestic and international voice and text messaging service (available on participating networks). • High speed data (CDMA 2000 1x Technology) • EVDO 1x Technology • Global Positioning (GPS) Technology • PIM Functions • MMS Messaging • TXT Messaging • PIX Messaging • FLIX Messaging • E-mail Messaging • Instant Messaging • 1.
Front View of Your Phone Front View of Your Phone The following illustrations show the main elements of your phone: Open View Section 2 Section 2: Understanding Your Phone 15
Features 1. Earpiece: The earpiece allows you to hear the other caller. 2. Display Screen Icons: Indicates the status of your phone, including status icons, message indicators, signal strength, etc. 3. Navigation Keys: This key allows you to scroll through the phone menu options. 4. Left Soft Key Option: This key is used to navigate through menus and applications by selecting the choice available in the Left Soft key Option. 5. Send Key: Allows you to place or receive a call.
Front View of Your Phone 10. Power/Accessory Connector: The power/accessory interface connector is used to plug in the charging accessories and also connect any available accessory cables to your phone. 11. Microphone: The Microphone allows the other caller to hear you clearly when you are speaking to them. 12. Alpha-numeric Keys: Use these keys to enter numbers, letters, and characters. 13. Speakerphone Key: Press this key to enable/disable the speakerphone option. 14. End Key: Ends a call.
Closed View Features Section 2 1. Camera Lens: The lens of your built-in camera/ camcorder. 2. Flash: The built-in flash has manual and automatic capabilities. 3. External LCD Display: External LCD shows provider, time, day, and date. It also displays incoming calls or messages. 4. Jog Dial: Song selection key. 5. Rewind Key: Music rewind key. 6. Play/Pause Key: Play or pause toggle key. 7. Stop Key: Music stop key. 8. Fast Forward Key: Music fast forward key.
Command Keys 9. TransFlash Card Slot: This expansion slot allows you to insert a TransFlash memory card to add additional memory and storage capacity. 10. Camera/Camcorder Key: Launches the Camera/ Camcorder feature of your phone. 11. Service Light: Flashes when phone is powered on and Service LED option is enabled in SETTINGS & TOOLS. 12. Speaker: Music, Ringtones, and Sounds are played through the speaker. Command Keys Functions for the soft keys are defined by what appears above each in the display.
Right Soft Key Some functions of the right soft key are as follows. • When the right soft key function is Options, press the Options (right) soft key to view more options for the current menu. • In standby mode, press the Contacts (right) soft key to open your Contacts list. Clear Key The CLR key is used to erase or clear numbers, text, or symbols from the display. You can also use to return to a previous menu or to return to standby mode from any menu. 1.
Understanding the Display Screen Send Key The Send key is used to answer calls, dial calls, and to recall the last number(s) dialed, received, or missed. 1. Press once to answer calls. 2. Enter a number and briefly press to make a call. 3. Briefly press in standby mode to display a list of recent calls to and from your phone. 4. Press twice in standby mode to call the most recently dialed number. 5. Press to pick up a waiting call. Press switch back to the other call.
Display icons Signal Strength: Always appears when your phone is on and indicates the current signal strength. More bars indicate a stronger signal. Roaming Indicator: Your phone is outside your home area. While roaming, another wireless provider may be handling your call. The service rate for the call may be higher than those made from within your home area. Please refer to Verizon Wireless for roaming rates. Digital: Appears when your phone is receiving digital data.
Understanding the Display Screen No service indicator: Your phone cannot find a signal because you’re outside a service area. You cannot make or receive calls. Wait for a signal or move to an open area to find a signal. This indicator always appears when you first turn on your phone and disappears once service is located. Dormant: Indicates no incoming or outgoing data. Voice Call: Indicates a call in progress. When dialing a number, this icon flashes until the call connects.
Alarm Only: Your phone will only ring when the set alarm sounds. Vibrate On: Your phone vibrates upon receiving a call. Speakerphone: Your phone switches to speakerphone instead of earpiece. Missed Calls: Your phone displays this icon when calls are missed. New Message: You’ve received a new text, page or web alert message. You’re also notified of a new message by animations and sound. You have one or more unread voicemail messages in your voicemail box. (Only applicable on Verizon Wireless Network.
Battery • Example: “Delete all received messages?” • Performing • Example: “Sending...” “Connecting...” • Completed • Example: “Message sent successfully!” • Information • Example: “New Message” • Error • Example: “System Error!” • Warning • Example: “Battery Low,” “Memory Full!” Battery Note: This phone comes packaged with a partially charged rechargeable standard Li-Ion battery and desktop charger.
Install the Battery 1. Insert the bottom end of the battery into the phone housing with the label side down. The gold contacts on the end of the battery should match up with those on the phone. 2. Push the top end of the battery down until it snaps into place. Remove the Battery Section 2 1. Pull the battery release latch toward the top of the phone. The top of the battery should pop up. 2. Use your finger to lift the battery (top end first) up and away from the phone.
Removable Memory Card Storage Travel Adapter The travel adapter is a convenient, light-weight charger that rapidly charges your phone from any 120/ 220 VAC outlet. 1. Plug the large end of the travel adapter into a standard 120/220 VAC wall outlet. 2. Insert the smaller end of the adapter into the charger/ accessory connector at the bottom end of the phone. Note: You can use your phone while charging, however, the battery charges faster if the phone is turned off.
The following file types can be saved to the removable TransFlash memory card: • PIX: Pictures you have saved from a PIX message or taken using your phone. • FLIX: Video Clips you have saved from a FLIX message or taken using your phone. • MP3s: MP3 music that you have transferred from your PC. • Sounds: Sounds you have recorded using your phone or saved from a TXT message with Sound attached.
Section 3: Call Functions Topics Covered • Making a Call • Answering a Call • Call History • Roaming • TTY • VoiceSignal • Voice Memos This section allows you to make or answer a call. It also includes the features and functionality associated with making or answering a call.
Making a Call 1. At the standby screen, enter the number you want to call using the keypad. 2. Press . Making Calls Using Contacts Contacts are entries that you create to store names, numbers, and other information for people or groups of interest. If you’ve already entered information into your Contacts list, you can recall and dial the contact easily. See "Adding a Contact" on page 63 for information on creating contacts. 1. At the standby screen, press the right soft key Contacts. 2.
Call History or Ignore to send the call to voicemail, or Quiet to silence the ringer. Note: To change the answer options, see "Answer Options" on page 110. Answering Call-Waiting Calls • When you receive a call while on a call, the Incoming screen displays. You can press and answer the new call or let the new call go to your voicemail. • If you choose and answer the incoming call, the original caller is placed on call waiting.
1. At the standby screen, press the key. 2. Press the down navigation key to highlight the desired number. 3. Once the desired number is highlighted, press OPEN. 4. The following options appear in the display: • “type” call: Where “type” indicates if the call was missed, dialed, or received. • Name: If the caller is in your Contacts list, their name is listed here. This option only appears if the caller is in your Contacts list.
Call History Call History Icons When you view Call History, an icon to the left of the number indicates the type of call. Indicates a Missed call Indicates a Dialed call Indicates a Received call Making Calls Using Call History 1. At the standby screen, press then press up or down navigation key until the desired number is highlighted. 2. Press to call the highlighted number. Or, you can press OPEN, then press to call the highlighted number. Creating or Updating Contacts Using Call History 1.
• Work • Fax 5. Press to add a new contact, and then enter information. 6. Use the navigation keys to enter additional information for the entry and then press SAVE. Delete Call History Entries 1. At the standby screen, press then press up or down navigation key until the desired number is highlighted. 2. Press the right soft key appears in the display. Options. A pop-up menu 3. Press the down navigation key to highlight Erase and press . Select Yes or No at the ERASE ENTRY? popup screen. 4. Press .
Roaming Roaming What is Roaming? Your phone can roam on other digital networks. Roaming occurs when you travel outside a pre-designated coverage area. The roaming icon displays when roaming is active and extra charges may apply when making or receiving calls. Note: Some features may be unavailable while roaming. Roaming Options The following roaming options are available: • Home Only - Your phone is available for normal operation only in the designated coverage area.
4. Use the up or down navigation keys to choose the setting you want, and press . TTY Your phone is fully TTY compatible. Connect the TTY equipment to the headset jack, which is located on the left side of the phone. Before you can use your phone with a TTY device, you’ll need to enable TTY functions in the phone. 1. Press highlight MENU. Use the right navigation key to SETTINGS & TOOLS. 2. Press Call Settings. 3. Press TTY Mode. The TTY Mode screen displays. 4.
VoiceSignal naturally to dial, and use voice commands to launch applications and navigate phone menus. VoiceSignal Settings You can adjust the settings and preferences for VoiceSignal by opening Voice Services menu. Using this menu, you can change the following Voice Command features: • Tips for adapting Digit Dial • Digit Dial Adaptation • Reset Digit Dial Adaptation • Call Digit Dialing • Call Name Dialing • Name Lookup • Opening Apps To access the VoiceSignal Settings menu, follow these steps: 1.
Section 3 confirm the correct one. You can control when choice lists appear by changing the Choice Lists setting to the following: • Automatic: Voice Signal displays a choice list when it is not confident it has identified the correct choice from among multiple alternatives. • Always On: When there are multiple alternatives, Voice Signal always displays a choice list. • Always Off: Voice Signal never displays a choice list. Instead, the application picks the best from among the possible choices.
VoiceSignal You can also change the speed and volume of name playback. • Prompts: Turns playback on or off for prompts such as “Please say a command.” • Digits: Turns playback on or off for digits, for example, when confirming a phone number. • Names: Turns playback on or off for names. • Name Settings: Adjusts the speed and volume of name playback. • About: Displays information about VoiceSignal including version number, build number, and device number.
Adaptation involves recording several digit sequences to adapt the system to the unique properties of your voice. The adaptation process takes about three minutes. Tips for adapting Digit Dial • Adapt digits in a quiet place. • Make sure you wait for the beep before starting to speak. • Speak clearly, and say each digit distinctly. • If you make a mistake while recording a sequence of digits, or if there is an unexpected noise that spoils the recording, rerecord that sequence.
VoiceSignal Wait for the beep and repeat the digits using your normal tone of voice. 8. After a moment, the phone plays back the recording and prompts “Did the recording sound ok?” If the recording was good, say “Yes.” If you need to re-record, say “No.” If you say “No,” the phone prompts you to pronounce the digits again. Wait for the beep and then re-record. Repeat this step until you’re satisfied with the recording. 9.
VoiceSignal Commands The following is a list of functions that you can perform using VoiceSignal speech recognition on your phone. • Call : Dial by saying either a Name in your Contacts list and the location (home, work, mobile) • Call : Dial by saying the number you want. • Send Text: Send a text message to a number or to someone in your Contacts List. • Lookup : Open the contact record for any name in your Contacts list.
VoiceSignal 6. The name that you said is repeated through the earpiece and your phone dials the number. 7. If VoiceSignal is not sure of the number that you said, a list of possible matches appears in the display. 8. You’re asked to confirm the correct number as VoiceSignal displays the results. Say “Yes” or “No” to confirm or reject the number when prompted. 9. The location is repeated through the earpiece and your phone dials the number.
7. If VoiceSignal is not sure of the number that you said, a list of possible matches appears in the display. 8. You’re asked to confirm the correct number as VoiceSignal displays the results. Say “Yes” or “No” to confirm or reject the number when prompted. Name Lookup To perform a name lookup, you’ll need to have some entries in your Contacts list. 1. Press and hold for two seconds. 2.
Voice Memos 3. Say “Go To” at a distance of 3-12 inches from the microphone. A list of options displays and a prompt of “Please choose” plays through the earpiece or speakerphone. 4. The menu option spoken opens. Voice Memos You can record a phone number, parking location, or simple reminders using Voice Memos. Recording Memos 1. At the standby screen, press MENU. Use the right navigation key to highlight SETTINGS & TOOLS. 2. Press Tools, then Voice Services. 3. Press Voice Memo.
Renaming Recordings 1. At the standby screen, press MENU. Use the right navigation key to highlight SETTINGS & TOOLS. 2. Press Tools, then Voice Services. 3. Press Voice Memo. Use the navigation key until the recording you want to rename is highlighted. 4. Press the right soft key Options. Press to rename the Voice Memo. Rename 5. Press and hold until the current name for the recording is deleted. Use the keypad to enter a new name for the recording. Section 3 6.
Section 4: Menu Navigation Section 4 Topics Covered • Menu Navigation • Menu Outline This section explains the menu navigation for your phone. It also includes an outline of all the available menus associated with your phone.
Section 4 Menu Navigation Access menus using the navigation keys, two soft keys , or use a shortcut. 1. In standby mode press MENU. The first of several menus appear in the display. 2. Use the navigation keys to browse phone menus. 3. Press to enter the menu or sub-menu presently appearing in the display. Return to the Previous Menu Press to return to the previous menu. Navigate Using Shortcuts You can also access menus and sub-menus using menu numbers. This method is often called a “shortcut.
Menu Navigation Navigation Key Shortcuts The Shortcut menu is set to Calendar by default, but it can be customized to select other functions instead. In standby mode, press MENU, use the right navigation key to highlight SETTINGS & TOOLS. Press Tools Shortcut Key. The shortcut key list displays. Use the navigation key to change the setting and press to save your selection. The In-Use Option Access numerous menus and features even while in a call.
Section 4 • Recent Calls: Display your recent incoming, missed and outgoing calls. • Send DTMF: Sends keypad tones. • Voice Privacy: Prevent recipients of your calls from seeing your number on their display. Select from standard or enhanced options. • Voice Memo: Record a voice memo. • Switch To Headset-Phone: Switches the device from handset to Bluetooth wireless technology headset. 2. Use the navigation key to highlight a menu. Press to open the highlighted menu or to activate the feature.
Menu Outline Section 4 1: Get New App. 2: My Ringtones 1: Get new Ringtones 1: Get New App. 3: My MP3s 4: My Sounds 1: Record New 2: Get PIX & FLIX 1: Get V CAST Video 2: Get New PIX 1: Get New App. 3: My PIX 4: My FLIX 5: PIX Place 6: Take PIX 7: Take FLIX 3: Get Fun & Games 1: Get New App. 4: Get News & Info 5: Get Going 1: Get New App. 6: Get More 1: Get New App.
0: Chat RECENT CALLS Section 4 1: Missed 2: Received 3: Dialed 4: All 5: View Timers SETTINGS & TOOLS 1: My Account 2: Tools 1: Calendar 2: MP3 Player 3: Alarm Clock 4: World Clock 5: Notepad 6: Calculator 7: Voice Services 1: Voice Dial 2: Train Word 3: Voice Memo 8: Shortcut Key 3: Sounds 1: Master Volume 2: Call Sounds 1: Call Ringtone 2: Call Vibrate 3: Alert Sounds 1: TXT Message 2: PIX-FLIX Message 3: Voicemail Message 4: Keypad Volume 5: Earpiece Volume 6: Service Alerts 52
Menu Outline Section 4: Menu Navigation Section 4 1: ERI 2: Minute Beep 3: Call Connect 7: Power On/Off 1: Power On 2: Power Off 4: Display 1: Banner 1: Personal Banner 2: ERI Banner 2: Backlight 1: Display 2: Keypad 3: Contrast 4: Wallpaper 1: Main LCD 2: Front LCD 5: Display Theme 6: Power On/Off Animation 1: Power On 2: Power Off 7: Service LED 5: System 1: Device Info 1: My Number 2: SW Version 3: Icon Glossary 2: Manage Memory 1: Save Options 2: Phone Memory 3: Card Memory 3: Language 4: Location 5:
Section 4 6: System Select 7: NAM Selection 8: Standalone Mode 6: Call Settings 1: Answer Options 2: Auto Retry 3: TTY Mode 4: One Touch Dial 5: Voice Privacy 6: Call Restrictions 1: Outgoing Call 2: Incoming Call 3: Contacts 7: Data Settings 8: DTMF Tones 7: Clock Format 1: Main Clock 2: Front Clock 8: Ringer ID 9: Picture ID 0: Bluetooth 1: On/Off 2: Search 1: All Devices 2: Audible Device 3: Disconnect 4: Registered List 5: Bluetooth Settings 1: My Device Name 2: Visibility 3: Security 54
Section 5: Entering Text Topics Covered • Changing the Text Entry Mode • Using Word Mode • Entering Upper and Lower Case • Entering Symbols • Entering Numbers Section 5: Entering Text 55 Section 5 This section outlines how to select the desired text input mode when entering characters into your phone. This section also describes how to use the T9 predictive text entry system to reduce the amount of key strokes associated with entering text.
Changing the Text Entry Mode 1. While composing a message in the Text area, press the right soft key Options to display the following options: • Add: Allows you to add more information or multimedia Section 5 items to your message. • Graphics: Lists preloaded and downloaded graphics to add to the message. • Animations: Lists preloaded and downloaded animations to add to the message. • Sounds: Lists preloaded and downloaded sounds to add to the message. • Quick Text: Choose from up to 12 messages.
Using Word Mode 2. While composing a message, press left soft key Abc to display a pop-up menu with the following Text Entry Mode options: • • • • • Word Abc ABC 123 Symbols Using Word Mode 1. In standby mode, press the left soft key Message, then press New TXT Msg to compose a new text message. 2. Enter the phone number or email address of the recipient, then press the down navigation key to move to the Text field. 3.
, S , A , M , S , U , N G Word recognizes that the most frequently used word for the sequence that you just entered is “Samsung.” If more than one word shares the same sequence, Word provides the most common of the two. Press to display other words in the dictionary, if available. Entering Upper and Lower Case Section 5 • Enter characters while in ABC mode by pressing the key that contains the desired characters for “H”.
Entering Numbers 3. Press the left soft key Abc to display a pop-up menu containing the text entry mode options. 4. Abc is highlighted by default. Use the up/down navigation keys to highlight Symbols, then press . The first of three screens containing symbols appears in the display. 5. Press Prev or Next to page through the other symbols, if necessary. 7. Repeat steps 3 through 6 to insert as many symbols into your message as desired.
5. Enter the key that corresponds with the number that you wish to enter. For example, press for the number 4. Section 5 6. When you are finished adding numbers, press the left soft key 123 to change to another Text Entry Mode or press SEND to send your message.
Section 6: Understanding Your Contacts Topics Covered • Opening Contacts Menu • Adding a Contact • Adding Pauses • Contact Groups • Finding a Contact Entry • Editing an Existing Contact Entry • Deleting a Contact Entry • Storing Numbers After a Call • Speed Dialing • My Name Card • Finding My Phone Number Section 6: Understanding Your Contacts 61 Section 6 This section allows you to manage your daily contacts by storing their name and number in your Contacts menu.
Opening Contacts Menu The Contacts menu provides access to powerful features such as adding Groups, creating and sending V-cards, and viewing the phone number assigned to your phone by Verizon Wireless. 1. In standby mode, press MENU. The CONTACTS menu displays. • New Contact: Add a number, e-mail, or web address to your Contacts. • Contact List: Find a phone number by Name. • Groups: Add new or rename one of your five default groups. • Speed Dials: Set a speed dial for a contact.
Adding a Contact Group icon. Select an available group to associate with the entry in this field. Ringtone icon. Select a ringtone to associate with the entry in this field. Mobile 2 icon. Enter a secondary mobile number for the entry in this field. Fax icon. Enter a fax number for the entry in this field. E-mail 2 icon. Enter a secondary e-mail address for the entry in this field. Adding a Contact When you add information to your Contacts, you can add it as a new entry or as an existing entry.
Method 2 You can add new numbers to the Contacts by simply entering the number while the phone is in standby mode, then following the necessary prompts to complete the process. 1. In standby mode, enter the number that you wish to save using the keypad, then press the left soft key Save. You’re prompted to select from Create New or Update Existing. 2. Press press to enter the number as a Create New, or to append the number to Update Existing. 3.
Adding Pauses 8. If you selected Update Existing, the Contact List opens in Search mode. Use the navigation key to browse through entries, or enter the name of the entry using the keypad. Once you’ve highlighted the entry you wish to append the number, press . 9. An UPDATE EXISTING pop-up screen with a selection list of entry types displays. Use the up or down navigation keys to highlight the desired type then press . The number is appended to the selected entry and saved to your Contacts.
your Contacts faster, quickly send messages to one or more group members, and more. Note: By default, new entries to your Contacts are placed into the No Group unless another group is specified. View Groups 1. In standby mode, press MENU, then press Groups. The following groups appear in the display. • No Group • Business • Colleague • Family • Friends Section 6 2. Use the navigation key to highlight the desired group, then press to access the group and view its contents.
Contact Groups • Friends 4. Use the navigation key to highlight the group containing the entry that you wish to move, then press . 5. Press SAVE. The selection has been saved to the designated group. Create a New Group In addition to the five groups already in your phone, you can create additional groups (a maximum of 10). New groups can be named anything you like as long as their names are within the 32-character limit. 1. In standby mode, press MENU, then press Groups.
3. Use the down navigation key to highlight the contacts in the group to which you want to send a message. Press to place a checkmark next to each selection to send messages to. 4. Press the left soft key contacts. Done after selecting up to 10 Note: You can mark up to 10 members of a group for message distribution. If you try and mark an 11th member, you’ll be notified that “MAX NUMBER OF DESTINATIONS IS 10”. 5. Press the down navigation key to place the cursor in the Text field. 6.
Finding a Contacts Entry 4. Press the left soft key contacts. Done after selecting up to 10 5. The CREATE PIX/FLIX MSG screen appears. Press the down navigation key to move the cursor into the following entry fields: • Text: Add text to the PIX Msg. • PIX/FLIX: Add an image from the PIX or FLIX Gallery to the message. • Sound: Add sound to the PIX Msg • Subject: Add a subject to the PIX Msg. • Name Card: Attach a Name Card or an entry in your Contacts to the message. 6.
2. Use the navigation key to highlight the contact list entry and press the left soft key Edit. 3. Use the navigation key to highlight the name, number, email address, or other field that you wish to edit. 4. Press to backspace and delete numbers, text, or symbols. 5. Press and hold highlighted field. to erase all numbers in the 6. Use the keypad to re-enter numbers, text, or symbols. 7. When you’re finished editing the entry, press Your changes are saved. SAVE. Deleting a Contact Entry 1.
Speed Dialing 1. After you press to end your call, the call time, length of call and phone number appears in the display. 2. Press the right soft key Save. You’re prompted to confirm this as a Create New, or Update Existing. 3. Follow the on-screen prompts to designate other information. Store a number in standby mode Store a phone number by entering the number in standby mode, then press Save. Follow the screen prompts to assign number types and other information.
2-touch dialing Call phone numbers assigned to keys 010 through 099 by briefly pressing the first key, then pressing and holding the second key. For example, to speed dial the number assigned to 013, briefly press , then press and hold until the number dials. 3-touch dialing Call phone numbers assigned to memory locations 100 through 500 by briefly pressing the first and second keys, then pressing and holding the third key.
My Name Card My Name Card My Name Card allows you to create a virtual business card. Once completed, you can send the card to recipients as a V-card attachment. 1. In standby mode, press Name Card. MENU, then press My 2. My Name Card opens with the Name field highlighted. 3. Enter information in each of the fields as desired. Use the navigation key to move between fields, then use the keypad to enter information. 4. When finished, press to save the V-card.
Section 6
Section 7: Messaging Topics Covered • Types of Messages • Retrieving New Messages • Creating and Sending TXT Messages • Creating and Sending PIX/FLIX Messages • Receiving PIX/FLIX Messages • New Handwritten Messages • Message Folders • Changing Message Settings • Voicemail • E-Mail • Mobile IM • Chat This section allows you to send or receive different types of messages. It also includes the features and functionality associated with messaging.
Types of Messages Your phone is capable of sending email, text, PIX & FLIX, and voicemail messages. Send email, text, PIX & FLIX messages by simply entering the email address or the phone number of the recipient in the To: <.........> or Send To field when creating a new message. Retrieving New Messages While text messages from other phones are delivered directly to your phone, PIX/FLIX messages and emails will be stored in the Inbox of the message server and the server will alert you to new messages.
Creating and Sending TXT Messages Note: When viewing a TXT message, you can view the previous TXT message by pressing the left navigation key and view the next TXT message by pressing the right navigation key. Creating and Sending TXT Messages You can send text messages to another mobile phone or to an email address. 1. In standby mode, press MENU, then press the left navigation key to highlight MESSAGING, press New TXT Message to compose a new text message.
4. Press the left soft key Add to select from the following options: • Contacts: Choose a number from your contacts list or select the right soft key to select from the Groups menu. • Recent Calls: Choose a number from the recent calls list. 5. After selecting or entering your recipients in the To field, use the down navigation key, or key to move to the message composer. 6. In the text field, compose your message using the keypad.
Creating and Sending PIX/FLIX Messages • Validity Period: Save the message for the assigned period of time. • Deferred Delivery: Save the message to be delivered at the assigned delivery date and time. • Enh. Delivery Ack: Turn message delivery acknowledgement Off or On. 7. Use the navigation key to highlight an option. Press to perform the function for the option, or to enter its sub-menu. 8. To send the message, press SEND.
• Save as Draft: Save the message to your Draft folder. • Priority Level: Save the message with a High or Normal priority. • Validity Period: Save the message for the assigned period of time. • Deferred Delivery: Save the message to be delivered at the assigned delivery date and time. • Remove PIX/FLIX: Removes the selected PIX/FLIX from the message. • Remove Sound: Removes the sound attached from the message. • Remove Name Card: Removes the attached name card from the message. 4.
Receiving PIX/FLIX Messages 8. Press the up/down navigation key to highlight the Sound field. Press the left soft key Sounds to select a sound. Press the up/down navigation key to highlight the desired sound and press . 9. Press the up/down navigation key to highlight the Subject field. Press the left soft key Abc to change entry mode. Press the right soft key Options to Add Quick Text. Press the up/down navigation key to highlight the desired Quick Text phrase, and press . 10.
3. Use the navigation keys to scroll through the message or view the entire picture if necessary. Note: When viewing a PIX/FLIX message, you can view the previous PIX/ FLIX message by pressing the left navigation key and view the next PIX/ FLIX message by pressing the right navigation key. Receive Messages While in a Call When you receive a message while in a call, the NEW PIX/ FLIX MESSAGE dialog box appears in the display. Press to clear.
New Handwritten Messages 3. Use the navigation key to highlight the unopened message, then press OPEN. The MESSAGE INFO screen appears first if the Auto Receive option is Off. If so, press DOWN to view PIX/FLIX message. New Handwritten Messages You can convert a picture of a handwritten message to a sketch that can be sent with a message. For information on taking a picture see "Take PIX" on page 126. For information on sending the message, see "Creating and Sending PIX/FLIX Messages" on page 79.
3. Press OPEN to view contents of the highlighted message. 4. While viewing a message press the right soft key Options to display the options listed. Play Again: Replays the PIX/FLIX message. Forward: Forward the message to another recipient. Erase: Pop-up prompts with Yes or No for deletion. Save PIX/FLIX: Saves the picture sent in the message to My PIX. • Save Sound: Saves the sound received with the message. • Save Quick Text: Saves the text received in the message to • • • • the Quick Text list.
Message Folders Inbox. See ‘Changing Message Settings” on page 88 for information on how to set Auto Erase and Auto Receive. Sent Your phone stores messages in the Sent folder, regardless of whether the message was successfully transmitted. Verify if and when a message or e-mail was successfully transmitted by enabling the Enh. Delivery Ack feature in Message Settings. Review Messages in the Sent Folder 1. In standby mode, press the left soft key Message then press Sent.
4. Use the navigation key to highlight the desired option. 5. Press option. to perform the function for the highlighted 6. From the Sent menu, press the left soft key Erase to delete the message from the Sent folder. Highlight Yes to delete, or No to return to the Sent menu. Drafts Draft messages are those that have been composed but never sent. You can return to the Drafts folder at any time to view, edit, or send a draft message. Create a Draft Text Message 1.
Message Folders then press Drafts. Or in standby mode, press MENU and use the left navigation key to highlight MESSAGING then press Drafts. 2. Use the navigation key to highlight the message that you wish to view, then press EDIT. The message opens in the Text field with the message text displayed. 3. Press the CLR key to backspace and delete any current characters in the display, if desired. Press and hold to erase all characters in the field. 4. Press the right soft key Options.
• Enh. Delivery Ack: Displays a pop-up screen notifying the message sent has been received. 5. Use the navigation key to highlight the desired option. Press to perform the function for the highlighted option. 6. Once you’ve returned to the message composer, press to send the message, if desired. Erase Options You can erase unlocked messages in your Inbox, Drafts folder, or Sent folder. Locked messages are not erased. To erase messages: 1.
Changing Message Settings 2. Use the navigation keys to access the following options: • Auto Save: Saves all messages sent. Use the navigation keys to select On, Off, or Prompt. • Auto Erase: Erases the oldest message of the same type (TXT or PIX/FLIX) when the maximum number of received messages of that type is exceeded in the Inbox.
Voicemail New voicemail alerts are sent via an SMS text message. These messages indicate how many new and urgent voicemails are in your box. Open the text message to view the number of new and urgent voice messages in your voicemailbox. If a caller leaves a callback number, this number will also be sent via an SMS text message. Receive Voicemail Messages When you receive a new voicemail message you’ll hear a sound and an SMS text message appears in the display. 1.
Mobile IM 2. Using the up and down navigation keys, select one of the following E-Mail providers and press . • • • • MSN Hotmail AOL Mail Yahoo! Mail Find More 3. Use the on-screen application specific functions and options to use the E-Mail applications.
Chat You have the ability to join wireless chat rooms from your phone. Send messages including text and icons to many chat room participants or launch one-on-one (private) chat rooms. To access a chat room from the browser: 1. In standby mode, press navigation key to highlight Chat. MENU, then press the left MESSAGING, then press 2. Mobile Web is launched. Using the up and down navigation keys, select one of the following chat rooms and press .
Section 8: Changing Your Settings Section 8 Topics Covered • My Account • Tool Settings • Sound Settings • Display Settings • System Settings • Call Settings • Clock Format • Ringer ID • Picture ID • Bluetooth Settings This section explains the sound and phone settings for your phone. It includes display settings, security settings, Bluetooth settings, call settings, and other settings associated with your phone.
Section 8 My Account The My Account menu connects to the VZW Mobile Web. You can setup Favorites or choose from the available applications. 1. In standby mode, press MENU, use the right navigation key to highlight SETTINGS & TOOLS. Press My Account. The menus are listed in the display. 2. Use the navigation keys to make your selection and press . Follow the on-screen instructions.
Sound Settings 1. In standby mode, press navigation key to highlight Tools. 3. Press Short Cut Key. 4. A list of menus appears in the display, use the navigation key to highlight the desired menu, then press . The shortcut is added to the list. Sound Settings The Sounds menu provides the ability to access the following menus: Master Volume 1. In standby mode, press MENU, use the right navigation key to highlight SETTINGS & TOOLS. Press Sounds. The Sounds menus are listed in the display. 2.
2. Press Call Sounds. Press Available options are: Call Ringtone. Section 8 • My Ringtones: You can get new ringtones from the web or choose from the list. • My Sounds: You can record new sounds to use or choose from the list. 3. Press Call Vibrate to set the Call Sounds to vibrate. 4. Press to save the setting. The phone returns to the Call Sounds menu. Alert Sounds 1. In standby mode, press MENU, use the right navigation key to highlight SETTINGS & TOOLS. Press Sounds.
Sound Settings 4. Press SET to save. Earpiece Volume 2. Press Earpiece Volume. 3. Use the Up and Down navigation keys to adjust the keypad volume. 4. Press SET to save. Service Alerts 1. In standby mode, press MENU, use the right navigation key to highlight SETTINGS & TOOLS. Press Sounds. The Sounds menus are listed in the display. 2. Press Service Alerts. For the following options, you can the Service Alert On or Off. • ERI • Minute Beep • Call Connect Power On/Off 1.
Section 8 Display Settings The Display menu affects the menu style, standby mode animation, backlight settings, and more. 1. In standby mode, press MENU, use the right navigation key to highlight SETTINGS & TOOLS. Press Display. The Display menus are listed in the display. • Banner: Create your own personalized greeting that appears • • • • • • in the display when your phone is in standby mode or choose the ERI Banner which displays the network in which you have subscribed.
Display Settings Banner To create a personal banner: 1. In standby mode, press MENU, use the right navigation key to highlight SETTINGS & TOOLS. Press Display. The Display menus are listed in the display. Press Banner. 2. Press handset. Note: Press and hold to create a Personal Banner for your to erase an existing banner, if necessary. 3. Enter a word or short phrase (18 characters or less) to appear in your phone’s display when the phone is in standby mode. 4. Press to save the new banner.
Section 8 Backlight Set the backlight for the display or keypad to remain on for a specified period of time or to remain on as long as the flip is open. Note: Prolonged backlight use drains your battery faster. 1. In standby mode, press MENU, use the right navigation key to highlight SETTINGS & TOOLS. Press Display. The Display menus are listed in the display. Press Backlight. The menus listed appear in the display. • Display: The following options are for the Main LCD.
Display Settings Contrast 1. In standby mode, press MENU, use the right navigation key to highlight SETTINGS & TOOLS. Press Display. The Display menus are listed in the display. Press Contrast. Front LCD appears in the display. 2. Use the navigation key to highlight adjust the contrast for the Front LCD, then press . Wallpaper 1. In standby mode, press MENU, use the right navigation key to highlight SETTINGS & TOOLS. Press Display. The Display menus are listed in the display. Press Wallpaper.
Section 8 Follow the prompts to select the wallpaper to appear in the Front LCD while your phone is in standby mode. Display Theme Choose from 6 preset colors used for menu display. 1. In standby mode, press MENU, use the right navigation key to highlight SETTINGS & TOOLS. Press Display. The Display menus are listed in the display. Press Display Theme. 2. Use the navigation keys to highlight the Display Theme you wish, then press .
System Settings Service LED Turns on the service light (LED) on or off during service. 2. Use the navigation keys to select On or Off, then press . System Settings The System menu provides the ability to access the following menus: Device Info The Device Info menu allows you to view the software and hardware information, your assigned number, and an icon glossary for your phone. 1. In standby mode, press MENU, use the right navigation key to highlight SETTINGS & TOOLS. Press System.
5. Press to return. Section 8 Manage Memory The Manage Memory menu allows you to set your Save Options to Phone Memory or Card Memory. You can also set the memory usage for pictures, videos, music, sounds, ringtones, and voice memos on your phone and TransFlash card. 1. In standby mode, press MENU, use the right navigation key to highlight SETTINGS & TOOLS. Press System. The System Settings menus are listed in the display. 2. Press Manage Memory.
System Settings Location The Location (GPS) setting identifies your location to the network. You can fully enable this setting or set GPS to work only in the case that you dial 911 from your phone. 1. In standby mode, press MENU, use the right navigation key to highlight SETTINGS & TOOLS. Press System. The System Settings menus are listed in the display. 2. Press Location. The Location screen displays. • Location On: GPS location setting is on wherever the feature is available.
Section 8 • Common Code: Common code On, uses a common password for both device and location lock code. Common code Off, uses separate passwords for both device and location. • Lock Mode: Allows you to lock the Device or Location. • Edit Code: Allows you to change the Lock Code for the Device or Location. • Reset Phone: All settings (except Contacts) are reset to factory default settings. Lock Phone Lock Phone restricts the use of your phone with the exception of outgoing calls to 911.
System Settings • On Power Up: The Lock Code is required whenever you power up the phone. to perform the function for the highlighted Edit Lock Code The default lock code is the last four digits of your phone number. Edit Code allows you to change this code to a lock code of your preference. 1. In standby mode, press MENU, use the right navigation key to highlight SETTINGS & TOOLS. Press System. The System menus are listed in the display. 2. Press Security. You’re prompted to enter the lock code.
Section 8 Resetting Your Phone Reset Phone returns all setup options to their factory default. 1. In standby mode, press MENU, use the right navigation key to highlight SETTINGS & TOOLS. Press System. The System menus are listed in the display. 2. Press Security, and enter the lock code. Press Reset Phone. A prompt appears in the display asking if you wish to restore default settings (except for the Contacts). 3. Press Yes to restore default settings or press No to return to the Security list.
Call Settings Note: If you dial 911, your phone dials the emergency number immediately (no prompt). The System Select menu allows you to set your roaming options. For information on roaming options, see "Roaming Options" on page 35. NAM Selection Your phone provides the option of selecting between two NAMs (Number Assignment Modules) or phone numbers. Select either NAM1 or NAM2.
Section 8 Answer Options The Answer Options menu allows you to select the method for answering incoming calls. 1. In standby mode, press MENU, use the right navigation key to highlight SETTINGS & TOOLS. Press Call Settings. The Call Settings menus are listed in the display. 2. Press Answer Options. The following options appear in the display: • Flip Open: Calls are answered when the flip is opened. • Any Key: Calls are answered when any key is pressed.
Call Settings Off Every 10 Seconds Every 30 Seconds Every 60 Seconds Section 8 • • • • 3. Highlight an option and press , or press to return to the Call Settings menu without making a selection. TTY Mode Before you can use your phone with a TTY device, you’ll need to enable TTY functions in the phone. See "TTY" on page 36 for more information. One Touch Dial You can use this option to enable or disable the speed dialing feature. 1.
display when receiving your call. Voice privacy options are Standard and Enhanced. Section 8 1. In standby mode, press MENU, use the right navigation key to highlight SETTINGS & TOOLS. Press Call Settings. The Call Settings menus are listed in the display. 2. Press Voice Privacy. The menus listed appear in the display. Standard and Enhanced appear in the display. 3. Use the navigation key to highlight the Voice Privacy option of your choice, then press . Your settings are saved.
Clock Format listed in the display. • Data Off: Phone operates in normal voice call mode. • Data For Next Call: Data call is enabled for next call only. Phone will reset to Data Off mode after call. • Data Until Powered Off: Phone will remain in Data Mode until phone is powered off. DTMF Tones Use this menu to set DTMF settings to Normal, Long, or Off. Clock Format This menu allows you to have time displayed in digital or analog format.
Section 8 Ringer ID The Ringer ID menu allows you to set the Ringer ID option to On so that you can associate different ringtones with different numbers. See "Get Tunes & Tones" on page 121 for more information. Picture ID The Picture ID menu allows you to set the Picture ID option to On so that you can associate a picture with a Contact. See "Take PIX" on page 126 for more information.
Bluetooth Settings Your phone supports the following profile service: • HSP: Mono-headset profile • Bluetooth handsfree kit support * * For vehicle/accessory compatibility, go to www.verizonwireless.com/bluetoothchart Phone does not support Bluetooth OBEX profiles. The following Bluetooth options are available: On/Off When the Bluetooth radio is turned on, you can use the Bluetooth features available. When the Bluetooth radio is turned off, you cannot send or receive information via Bluetooth.
Section 8 Search This option searches for a recognized Bluetooth wireless technology device. 1. In standby mode, press MENU, use the right navigation key to highlight SETTINGS & TOOLS. Press Bluetooth. The Bluetooth menus are listed in the display. 2. Press Search. Press All Devices to search for any active Bluetooth wireless technology device (laptop or headset) or press Audible Device for the Bluetooth wireless technology headset or the hands-free car kit headset.
Bluetooth Settings Section 8 1. In standby mode, press MENU, use the right navigation key to highlight SETTINGS & TOOLS. Press Bluetooth. The Bluetooth menus are listed in the display. 2. Press Disconnect. If you have an active Bluetooth connection, a message will say “(device name) IS CONNECTED. DISCONNECT?”. Highlight Yes to disconnect or No to cancel and press . Registered List This menu provides a list of Bluetooth wireless technology devices accessed by your handset.
Section 8 name). RETRY?” displays. Highlight Yes to retry or No to cancel and press . Bluetooth Settings The Bluetooth wireless technology settings menu provides the ability to view and change the device name, show the visibility, and set the security for the device. 1. In standby mode, press MENU, use the right navigation key to highlight SETTINGS & TOOLS. Press Bluetooth. The Bluetooth menus are listed in the display. 2. Press Bluetooth Settings.
Section 9: Multimedia Topics Covered • Get It Now • Get Tunes & Tones • Get PIX & FLIX • Get Fun & Games • Get News & Info Section 9 • Get Going This section describes how you receive tunes, tones, images, games, news and information. You can also take and send pictures and video from your phone.
Get It Now The Get It Now menu provides sub-menus to GetTunes & Tones, Get PIX & FLIX, Get Fun & Games, Get News & Info, and Get Going. You can also view memory info to see how much space you’ve used (and have left) for stored media. Use the following steps for each GET IT NOW sub-menu. Section 9 1. In standby mode, press navigation key to highlight right soft key Info. MENU, use the left GET IT NOW.
Get Tunes & Tones Get Tunes & Tones This menu allows you to get new, record new, and set tunes and tones as your ringtone. It also allows you to access your MP3 files. Get New Ringtones This menu allows you to get new, record new, and set your ringtone. 2. Highlight Get New Ringtones and press . My Ringtones 1. In standby mode, press MENU, use the left navigation key to highlight GET IT NOW. The Get Tunes & Tones menu is highlighted, press . 2. Highlight My Ringtones and press . 3.
3. The MP3 Player opens with a list of music files available on the TransFlash memory card. Refer to "MP3 Player" on page 138 for more information on how to play your music files. My Sounds 1. In standby mode, press MENU, use the left navigation key to highlight GET IT NOW. The Get Tunes & Tones menu is highlighted, press . 2. Highlight My Sounds and press Section 9 3. Record New is highlighted. Press Voice Memo screen. . launch the New 4. Press REC to begin recording. Press STOP to stop.
Get PIX & FLIX For additional information regarding V CAST Video and its use, see www.verizonwireless.com. Note: To access and download videos, you must have the displayed. icon Browsing, Selecting and Playing Video Clips 1. In standby mode, press navigation key to highlight Get PIX & FLIX and press MENU, use the left GET IT NOW. Highlight . . 3. Use the up or down navigation keys to highlight the V CAST Video category you want. 4. After choosing the category you want press .
previous section, “Browsing, Selecting and Playing Video Clips” above. 2. To download and save the highlighted video, press SAVE. The video clip will be saved to V CAST Video in My FLIX. 3. Highlight Yes to accept charges, if applicable, and then press . The video download begins. 4. Once the download is completed, “Download Complete. Play video now?” appears in the display. Section 9 5. Select Yes and press to view the video, or select No to return to the V CAST Video menu.
Get PIX & FLIX Using the Video Gallery The video clips you save are stored in a folder named V CAST Video in My FLIX. You can access this folder without launching the V CAST Video application and delete your saved video clips directly. 1. In standby mode, press navigation key to highlight PIX & FLIX. 2. Press MENU, use the left GET IT NOW. Press Get My FLIX. 4. Use the navigation key to highlight the video you want to delete and press the right soft key Options. 5.
7. After reading terms, highlight Save to accept and press , or highlight Cancel to decline and press . Note: Fees apply for text messages/alerts both sent and received. Get New PIX 1. In standby mode, press navigation key to highlight Get PIX & FLIX. MENU, use the left GET IT NOW. Press Section 9 2. To get new PIX press Get New PIX. Press Get New App. You are connected to the internet. Follow the on-screen prompts. Take PIX This menu launches the camera. 1.
Get PIX & FLIX • Resolution: (1280X960), (640X480), (320X240), (160X120) and Picture ID Note: Resolution must be set to Picture ID or a size smaller than 320x240 to attach a picture to a Contact in the phone. 4. Press and hold TAKE to capture a picture. Press the right soft key Erase to delete it or press the left soft key Save. The picture is now saved to the Gallery. 5. To exit the camera, press the key. PIX Gallery 1. In standby mode, press navigation key to highlight Get PIX & FLIX. 2.
4. Press the right soft key Options to view your pictures in a Slide Show, or to Lock the pictures from deletion. Highlight your selection and press . Press PAUSE or the left soft key Done to return. 5. From the My PIX menu, press to view the highlighted picture. Press VIEW. Press the right soft key Options to select from the following options: Section 9 • • • • Send: Launches the Create PIX/FLIX Msg screen. To PIX Place: Transfers the file to the online gallery.
Get PIX & FLIX 2. Press Take FLIX. The camcorder is now active. Press the right soft key Options to select from the following options: 3. Press to save the settings. 4. Press REC to begin recording. Press the left soft key Pause or STOP. 5. Press the right soft key Save. Erase or the left soft key 6. To exit the camcorder, press the key. Note: If you receive an incoming call while using your camcorder, the video recording is stopped. You will be presented with the call Ignore / Accept screen.
Note: If the battery level becomes too low while you are recording, the recording is stopped and the video is auto-saved. The low battery indicator will be displayed and you will exit from the camcorder application. If your battery is too low then the phone will power down without saving the video. Section 9 Note: If you receive a text message, a multi-media message or a voice mail while you are recording, the video recording is stopped. You are given the choice to View Now or View Later.
Get Fun & Games • • • • • • • • Get V CAST Video Set As Rename Move Lock Erase Erase All FLIX Info PIX Place Note: You must first setup your account on the Verizon Wireless website: www.verizonwireless.com before establishing a connection. 1. In standby mode, press navigation key to highlight Get PIX & FLIX. MENU, use the left GET IT NOW. Press 2. Highlight PIX Place and press on screen displays. . The PIX Place sign- 3. Enter your Mobile Number and Password.
2. Press Get New App. 3. Use the navigation keys to make a selection and press . 4. Choose the charge Either Subscription or Unlimited, then press . Follow in screen prompts to apply. Get News & Info Section 9 1. In standby mode, press navigation key to highlight Get News & Info. MENU, use the left GET IT NOW. Press 2. The browser is launched and a pop up screen with available applications is displayed. 3. Use the navigation key to browse the categories. 4.
Get Going Get Going Download applications that keep you in touch with the world, keep you organized, and help you find the coolest spots. 1. In standby mode, press navigation key to highlight Get Going. MENU, use the left GET IT NOW. Press 2. Get New App. is highlighted. Press . 4. Follow on screen subscription prompts and press The download process begins. . 5. At the “App installed successfully. Would you like to run it?” prompt, press Yes to launch application, or No to return to category list.
Section 9
Section 10: Tools Topics Covered • Calendar • MP3 Player • Alarm Clock • World Clock • Notepad • Calculator The topics covered in this section allow you to schedule appointments, view the calendar, play MP3 files, set an alarm, view time zones, take notes, and perform simple math calculations.
Calendar Schedule up to eight events for any day by indicating each event’s start and end time. Set alarms for events so that you can be alerted before an event takes place. Events scheduled for future dates automatically appear on your Today events schedule for the present day. Add a new event 1. In standby mode, press MENU, then press the right navigation key to SETTINGS & TOOLS. Press Tools Calendar. The calendar appears in the display with the current date highlighted. 2.
Calendar • End Time: Enter the end time for the event. • am/pm: Select from am or pm for the end time. • Time Zone: Enter the time zone you wish your event to reflect. • Recurrence: Select the frequency of the event. • Alert: Sets the alarm for the event. Select from Tone, Vibrate, or Light Only. • Reminder: Set a reminder up to one day before the event. 5. Fill in and select event details using the navigation keys and the alpha-numeric keypad. 6. Press . The event is saved. View an event 1.
6. Press VIEW to view event details for the date. 7. To edit the event, press the left soft key changes, then press SAVE. 8. Press the right soft key appears in the display. Edit. Make Options. A pop-up menu 9. To erase the current event, press Erase. A pop-up menu appears with Yes highlighted. press to erase, or highlight No to cancel. 10. To see the selected date in a month view, press Monthly. 11. To see the selected date in a week view, press Weekly.
MP3 Player 3. Remove the TransFlash card from the phone and insert it into a PC adaptor (purchased separately). 4. Transfer MP3 files from your PC to the My_MP3s directory on the TransFlash card. 5. Insert the TransFlash card back into the phone. Playing MP3s with the Flip Closed The external MP3 keys which you will use are labeled below. Note: If the TransFlash memory card is not inserted in the phone when the MP3 Player is launched, the warning message, CARD NOT AVAILABLE.
3. Press the Play/Pause ( play the MP3. ) key or press the jog dial to 4. To stop an MP3, press the Stop ( ) key. 5. You can use the Fast Forward ( ) and Rewind ( keys to forward or rewind your MP3 to another song. Press and hold the Fast Forward ( ) and Rewind ( ) keys to forward or rewind the current song approximately 20 seconds. ) Playing MP3s with the Flip Open 1. In standby mode, press MENU, then press the right navigation key to SETTINGS & TOOLS. Press Tools MP3 Player.
Alarm Clock Note: The following characters cannot be used in an MP3 filename: /\*?“<>:| The file name is limited to 60.3 characters (sixty to left of ‘.’, three to right of ‘.’) 3. Press the up/down navigation keys to highlight the song you want to listen to and press to mark it. To select more than one song, press the up/down navigation key and press to mark each one. 4. Press the left soft key file(s).
4. The Alarm field is highlighted. Use the left/right navigation keys to select On or Off. 5. Press the down navigation key to highlight the Time field, then enter the time that you wish for the alarm to sound. 6. Press the down navigation key once to highlight the am/ pm field. Use the left/right navigation keys to select am or pm. 7. Press the down navigation key once to highlight the Frequency field. Use the left/right navigation keys to set the frequency (occurrence) of the alarm.
Alarm Clock Disable an alarm before it sounds 1. In standby mode, press MENU, then press the right navigation key to SETTINGS & TOOLS. Press Tools Alarm Clock. The Alarm Clock menu displays with the Alarm 1 highlighted. 2. Use the navigation keys to highlight the alarm you wish to disable, then press the right soft key Options. A pop-up menu appears in the display. 3. Press Off to turn the highlighted alarm off. Press Reset Alarm to reset the highlighted alarm or press Reset All to reset all of the alarms.
World Clock World Clock allows you to view the time of day or night in any part of the world. 1. In standby mode, press MENU, then press the right navigation key to SETTINGS & TOOLS. Press Tools World Clock. 2. Use the left soft key Cities to display the 45 supported cities. Press to save your entry. 3. Press the right soft key options: Options to view the following • Set as Local Time: Sets the time according to the city chosen in the Cities field.
Notepad 3. To add a new memo, press the left soft key then enter the memo using the keypad. Add, 4. While entering a memo, press the left soft key Abc, to display a pop-up menu with the following text entry modes • • • • • Word Abc ABC 123 Symbols 5. Use the navigation keys to select the other available text entry modes of 123, Word, and Symbol, or press to exit the pop-up menu. 6. When you’re finished entering details for the note, press . The note is saved. Review, Add, Edit, and Erase Memos 2.
• Erase: Erase the note currently highlighted or appearing in the display. • Erase All: Erase all notes. 3. Use the navigation keys to highlight an option or press to exit the pop-up menu. 4. Press to perform the highlighted option’s function. Calculator You can perform calculations, including addition, subtraction, multiplication and division using your phone. 1. In standby mode, press MENU, then press the right navigation key to SETTINGS & TOOLS. Press Tools Calculator. The Calculator opens. 2.
Calculator 7. Use the keypad to enter the second number into your equation. 8. Press result.
Section 10
Section 11: Mobile Web Topics Covered • Mobile Web • Launching Mobile Web • Exit Mobile Web • Navigate the Web • Mobile Web Soft keys • Links • Place a Call While Using Mobile Web This section outlines the available gaming options and accessories for your phone. For more information, contact your service provider.
Mobile Web Mobile Web allows you to surf the web from your wireless phone. If you receive a call while using Mobile Web, the web session is suspended during the call. Once the call ends, your Mobile Web session resumes where you left off. Note: This feature is currently unavailable outside of the United States. Only available within the Verizon Wireless Enhanced Services Area. Any time the service indicator icon is visible, you are connected to the Internet and billed accordingly.
Navigate the Web Navigate the Web Note: This feature is currently unavailable outside of the United States. Only available within the Verizon Wireless Enhanced Services Area. When you use Mobile Web, some of the keys operate differently than during a normal phone call.
Navigation Key: Use the navigation key to browse lists and highlight options. CLR Key: A browser back-up key. Press once to back up one page. Press and hold to go back to Mobile Web home page. Press to clear the last number, letter, or symbol entered. Press and hold to completely clear the display. Asterisk/Shift Key: Press before entering text to enable upper case characters (in Abc mode). 0/Next Key: Press to enter a zero (0), or to display another word in the dictionary when in Word entry mode.
Links Links Note: This feature is currently unavailable outside of the United States. Only available within the Verizon Wireless Enhanced Services Area. Links can serve several purposes, such as jumping to a different page, to a different site, or initiating a phone call. Links are underlined (__). Normally, the left soft key is used to select a highlighted link. Place a Call While Using Mobile Web Note: This feature is currently unavailable outside of the United States.
Section 11
Section 12 Section 12: Health and Safety Information Topics Covered • Health and Safety Information This section outlines the safety precautions associated with using your phone.
Section 12 Health and Safety Information Exposure to Radio Frequency (RF) Signals Certification Information (SAR) Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the exposure limits for radio frequency (RF) energy set by the Federal Communications Commission (FCC) of the U.S. government.
Health and Safety Information Before a new model phone is available for sale to the public, it must be tested and certified to the FCC that it does not exceed the exposure limit established by the FCC. Tests for each model phone are performed in positions and locations (e.g. at the ear and worn on the body) as required by the FCC. Body-worn operations are restricted to Samsung-supplied, approved, or nonSamsung designated accessories that have no metal and must provide at least 1.
Section 12 printed somewhere on the case of the phone. Sometimes it may be necessary to remove the battery pack to find the number. Once you have the FCC ID number for a particular phone, follow the instructions on the website and it should provide values for typical or maximum SAR for a particular phone. Additional product specific SAR information can also be obtained at www.fcc.gov/cgb/ sar. Consumer Information on Wireless Phones The U.S.
Consumer Information on Wireless Phones produce RF exposures well within the FCC's compliance limits. The available scientific evidence does not show that any health problems are associated with using wireless phones. There is no proof, however, that wireless phones are absolutely safe. Wireless phones emit low levels of radio frequency energy (RF) in the microwave range while being used. They also emit very low levels of RF when in the stand-by mode.
Section 12 to repair, replace or recall the phones so that the hazard no longer exists.
Consumer Information on Wireless Phones FCC also regulates the base stations that the wireless phone networks rely upon. While these base stations operate at higher power than do the wireless phones themselves, the RF exposures that people get from these base stations are typically thousands of times lower than those they can get from wireless phones. Base stations are thus not the primary subject of the safety questions discussed in this document.
Section 12 Three large epidemiology studies have been published since December 2000. Between them, the studies investigated any possible association between the use of wireless phones and primary brain cancer, glioma, meningioma, or acoustic neuroma, tumors of the brain or salivary gland, leukemia, or other cancers. None of the studies demonstrated the existence of any harmful health effects from wireless phones RF exposures.
Consumer Information on Wireless Phones What is FDA doing to find out more about the possible health effects of wireless phone RF? FDA has been a leading participant in the World Health Organization international Electromagnetic Fields (EMF) Project since its inception in 1996. An influential result of this work has been the development of a detailed agenda of research needs that has driven the establishment of new research programs around the world.
Section 12 What steps can I take to reduce my exposure to radio frequency energy from my wireless phone? If there is a risk from these products - and at this point we do not know that there is - it is probably very small. But if you are concerned about avoiding even potential risks, you can take a few simple steps to minimize your exposure to radio frequency energy (RF).
Consumer Information on Wireless Phones Do hands-free kits for wireless phones reduce risks from exposure to RF emissions? Since there are no known risks from exposure to RF emissions from wireless phones, there is no reason to believe that hands-free kits reduce risks. Hands-free kits can be used with wireless phones for convenience and comfort. These systems reduce the absorption of RF energy in the head because the phone, which is the source of the RF emissions, will not be placed against the head.
Section 12 believe that accessories that claim to shield the head from those emissions reduce risks. Some products that claim to shield the user from RF absorption use special phone cases, while others involve nothing more than a metallic accessory attached to the phone. Studies have shown that these products generally do not work as advertised. Unlike "hand-free" kits, these so-called "shields" may interfere with proper operation of the phone.
Consumer Information on Wireless Phones FDA continues to monitor the use of wireless phones for possible interactions with other medical devices. Should harmful interference be found to occur, FDA will conduct testing to assess the interference and work to resolve the problem. Additional information on the safety of RF exposures from various sources can be obtained from the following organizations: • FCC RF Safety Program: http://www.fcc.
• Updated 7/16/2003: US Food and Drug Administration Section 12 http://www.fda.gov/cellphones Road Safety Your wireless phone gives you the powerful ability to communicate by voice, almost anywhere, anytime. But an important responsibility accompanies the benefits of wireless phones, one that every user must uphold. When driving a car, driving is your first responsibility. When using your wireless phone behind the wheel of a car, practice good common sense and remember the following tips: 1.
Road Safety 6. Dial sensibly and assess the traffic; if possible, place calls when you are not moving or before pulling into traffic. Try to plan calls when your car will be stationary. If you need to make a call while moving, dial only a few numbers, check the road and your mirrors, then continue. 7. Do not engage in stressful or emotional conversations that may be distracting.
Section 12 10. Call roadside assistance or a special non-emergency wireless assistance number when necessary. If you see a broken-down vehicle posing no serious hazard, a broken traffic signal, a minor traffic accident where no one appears injured, or a vehicle you know to be stolen, call roadside assistance or other special non-emergency number. "The wireless industry reminds you to use your phone safely when driving." For more information, please call 1-888-901-SAFE, or visit our web-site www.wow-com.
Using Your Phone Near Other Electronic Devices Using Your Phone Near Other Electronic Devices Pacemakers Pacemaker manufacturers recommend that a minimum distance of 15 cm (6 inches) be maintained between a wireless phone and a pacemaker to avoid potential interference with the pacemaker. These recommendations are consistent with the independent research and recommendations of Wireless Technology Research.
Section 12 interference noise, and phones also vary in the amount of interference they generate. The wireless telephone industry has developed ratings for some of their mobile phones, to assist hearing device users in finding phones that may be compatible with their hearing devices. Not all phones have been rated. Phones that are rated have the rating on their box or a label on the box. The ratings are not guarantees. Results will vary depending on the user’s hearing device and hearing loss.
Potentially Explosive Environments Other Medical Devices Vehicles RF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles. Check with the manufacturer or its representative regarding your vehicle. You should also consult the manufacturer of any equipment that has been added to your vehicle. Posted Facilities Switch your phone off in any facility where posted notices require you to do so.
Section 12 (fuel storage and distribution areas), chemical plants or where blasting operations are in progress. Areas with a potentially explosive atmosphere are often but not always clearly marked.
FCC Notice and Cautions When making an emergency call, remember to give all the necessary information as accurately as possible. Remember that your phone may be the only means of communication at the scene of an accident; do not cut off the call until given permission to do so. Restricting Children's access to your Phone Your phone is not a toy. Children should not be allowed to play with it because they could hurt themselves and others, damage the phone or make calls that increase your phone bill.
Section 12 Cautions Any changes or modifications to your phone not expressly approved in this document could void your warranty for this equipment, and void your authority to operate this equipment. Only use approved batteries, antennas and chargers. The use of any unauthorized accessories may be dangerous and void the phone warranty if said accessories cause damage or a defect to the phone. Although your phone is quite sturdy, it is a complex piece of equipment and can be broken.
Product Performance • Failure to observe these instructions may lead to the suspension or denial of telephone services to the offender, or legal action, or both. Section 12 Product Performance Getting the Most Out of Your Signal Reception The quality of each call you make or receive depends on the signal strength in your area. Your phone informs you of the current signal strength by displaying a number of bars next to the signal strength icon. The more bars displayed, the stronger the signal.
Section 12 Maintaining Your Phone's Peak Performance For the best care of your phone, only authorized personnel should service your phone and accessories. Faulty service may void the warranty. There are several simple guidelines to operating your phone properly and maintaining safe, satisfactory service. • If your phone is equipped with an external antenna, hold the phone with the antenna raised, fully-extended and over your shoulder. • Do not hold, bend or twist the phone's antenna, if applicable.
Battery Standby and Talk Time Battery Standby and Talk Time Battery Precautions • Avoid dropping the cell phone. Dropping it, especially on a hard surface, can potentially cause damage to the phone and battery. If you suspect damage to the phone or battery, take it to a service center for inspection. • Never use any charger or battery that is damaged in any way. • Use the battery only for its intended purpose.
the battery connected to a charger for more than a week, since overcharging may shorten its life. Section 12 • Do not use incompatible cell phone batteries and chargers. Some Web sites and second-hand dealers, not associated with reputable manufacturers and carriers, might be selling incompatible or even counterfeit batteries and chargers. Consumers should purchase manufacturer or carrier recommended products and accessories.
Care and Maintenance • Dispose of used batteries in accordance with local regulations. Care and Maintenance Your phone is a product of superior design and craftsmanship and should be treated with care. The suggestions below will help you fulfill any warranty obligations and allow you to enjoy this product for many years • Keep the phone and all its parts and accessories out of the reach of small children. • Keep the phone dry.
• Do not paint the phone. Paint can clog the device's moving parts and prevent proper operation. Section 12 • Do not put the phone in or on heating devices, such as a microwave oven, a stove or a radiator. The phone may explode when overheated. • If your phone has an external antenna, use only the supplied or an approved replacement antenna. Unauthorized antennas or modified accessories may damage the phone and violate regulations governing radio devices.
Section 13: Warranty Information Topics Covered • Standard Limited Warranty Section 13: Warranty Information 183 Section 13 This section explains the warranty information for your new phone.
Standard Limited Warranty What is Covered and For How Long? SAMSUNG Section 13 TELECOMMUNICATIONS AMERICA, L.P.
Standard Limited Warranty What are SAMSUNG's Obligations? During the applicable warranty period, SAMSUNG will repair or replace, at SAMSUNG's sole option, without charge to Purchaser, any defective component part of Product.
Section 13 warranted for a period of ninety (90) days. All other repaired/replaced Product will be warranted for a period equal to the remainder of the original Limited Warranty on the original Product or for 90 days, whichever is longer. All replaced parts, components, boards and equipment shall become the property of SAMSUNG. If SAMSUNG determines that any Product is not covered by this Limited Warranty, Purchaser must pay all parts, shipping, and labor charges for the repair or return of such Product.
Standard Limited Warranty RESULTING FROM THE PURCHASE, USE, OR MISUSE OF, OR INABILITY TO USE THE PRODUCT OR ARISING DIRECTLY OR INDIRECTLY FROM THE USE OR LOSS OF USE OF THE PRODUCT OR FROM THE BREACH OF THE EXPRESS WARRANTY, INCLUDING INCIDENTAL, SPECIAL, CONSEQUENTIAL OR SIMILAR DAMAGES, OR LOSS OF ANTICIPATED PROFITS OR BENEFITS, OR FOR DAMAGES ARISING FROM ANY TORT (INCLUDING NEGLIGENCE OR GROSS NEGLIGENCE) OR FAULT COMMITTED BY SAMSUNG, ITS AGENTS OR EMPLOYEES, OR FOR ANY BREACH OF CONTRACT OR FOR AN
Section 13 YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY FROM STATE TO STATE/ PROVINCE TO PROVINCE. THIS LIMITED WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL PURCHASER OF THIS PRODUCT AND STATES PURCHASER'S EXCLUSIVE REMEDY.
Standard Limited Warranty OF ANY SUCH THIRD-PARTY SOFTWARE OR EQUIPMENT LIE SOLELY WITH THE PURCHASER AND THE DIRECT VENDOR, OWNER OR SUPPLIER OF SUCH THIRD-PARTY SOFTWARE OR EQUIPMENT, AS THE CASE MAY BE. Samsung Telecommunications America, L.P. 1301 East Lookout Drive Richardson, Texas 75082 Phone: 1-800-SAMSUNG Phone: 1-888-987-HELP (4357) ©2005 Samsung Telecommunications America,L.P. All rights reserved. No reproduction in whole or in part allowed without prior written approval.
Section 13
Index Bluetooth Settings 114 Numerics Calendar 1-touch dialing 71 2-touch dialing 72 3G protocol icon 22 3-touch dialing 72 911, notes about 108 Call Functions 29 A Adding a New Contact Entry 63 Alarm clock icon 23 snooze 143 turn off the alarm 143 Answer options 110 Auto answer 110 Auto answer icon 24 Auto retry 110 B Backup to last menu 48 Battery charging 26 indicator 27 installing 26 removing 26 strength icon 23 Bluetooth About 114 Bluetooth icons 23 C add a new event 136 Answering a Call 30
pause 65 Creating and Sending New Messages 77 Creating and Sending PIX / FLIX message 88 Creating and Sending Text message 77 Entering Upper and Lower Case 58 Using Word Mode 57 F Finding a Contacts Entry 69 Finding My Phone Number 73 D Device Info 103 Dialing Folder one-touch 71 three-touch 72 two-touch 72 Disable alarm 143 G Display animation 102 backlight 100 banner 99 language 104 screen icons 22 Draft messages 86 drafts 86 inbox 83 Get It Now 120 Get New PIX 126 Get News & Info 132 Get PIX &
mation 155 I Icons alarm on 24 alarm only 24 battery strength 23 display 22 dormant 23 signal strength 22 silent mode 23 TTY 23 Inbox folder 83 Indicator calendar appointment 24 missed calls 24 new message 24 no service 23 roaming 22 signal strength 22 speakerphone 24 Installing battery 26 Memory Card Storage 27 Memos, editing 145 Menu Navigation 47 Menu Outline 50 Menu shortcuts 48 Menu, in-use option 49 Message folder drafts 86 inbox 83 Messages, receive in call 82 Messaging 75 Types of Messages 76
No service indicator 23 Note pad 144 Notes and tips 11 Notes, description 12 Roaming indicator 22 P Security Phone Memory Storage 28 Picture ID 114 PIX Gallery 127 PIX messages rejecting 82 view later 82 Place a call while using Mobile Web 153 Powering off 10 Powering on 10 R Receive messages in call 82 Receive text messages 76 Removing battery 26 Reset phone 108 Restrict calls 112 Retrieving a Message 76 Retrieving New Message 90 Return to last menu 48 Reviewing sent 85 Right soft key 20 Ringer ID
Standard Limited Warranty Standard Limited Warranty 184 U Understanding Your Contact List Finding a Contact Entry 69 Store numbers, shortcuts 71 Storing numbers after a call 70 Understanding Your Contacts 61 Adding a New Contact Entry 63 Deleting a Contact Entry 70 Editing an Existing Contact Entry 69 Finding My Phone Number 73 Speed Dialing 71 T Take FLIX 128 Take PIX 126 Text messages, receiving 76 Three-touch dialing 72 Tip find a name 30 Tip, description 12 Tools 135 alarm 141 calculator 146 cale
Video clips 122 View an event, calendar 137 View PIX Msg Later 82 Voice Call Icon 23 Voice mail listening to 11 Voice mail icon 24 Voice notes renaming 46 Voice privacy 111 Voicemail 90 Voicemail, viewing messages 90 VoiceSignal description 42 digit dial 43 features 42 menu 36 name dial 42 name lookup 44 open apps 44 settings 37 W Warranty Information 183 World time 144 196
