SCH-a795 Series P O R T A B L E Q u a d - B a n d T E L E P H O N E User Guide Please read this manual before operating your phone, and keep it for future reference. YC26.
Intellectual Property All Intellectual Property, as defined below, owned by or which is otherwise the property of Samsung or its respective suppliers relating to the SAMSUNG Phone, including but not limited to, accessories, parts, or software relating there to (the “Phone System”), is proprietary to Samsung and protected under federal laws, state laws, and international treaty provisions.
Disclaimer of Warranties; Exclusion of Liability Licensed by Qualcomm Incorporated under one or more of the following patents: U.S. Patent No. 4, 901, 307; 5, 056, 109; 5, 099, 204; 5, 101, 501; 5, 103, 459; 5, 107, 225; 5, 109, 390. Printed in South Korea GH68-05891A Openwave® is a registered Trademark of Openwave, Inc. RSA® is a registered Trademark RSA Security, Inc.
Table of Contents Table of Contents Intellectual Property .........................................................2 Samsung Telecommunications America (STA), L.P. ..........2 Disclaimer of Warranties; Exclusion of Liability .................3 Section 1: Getting Started ............................... 11 Activating Your Phone ....................................................12 Turning Your Phone On and Off ......................................12 Setting Up Your Voicemail ..............................
Table of Contents Using T9 Mode ...............................................................70 Entering Upper and Lower Case ......................................71 Entering Symbols ...........................................................72 Entering Numbers ..........................................................73 Section 6: Understanding Your Phonebook .... 75 Opening Phonebook Menu ..............................................76 Adding a Contact ...............................................
Table of Contents Changing Message Settings .........................................131 Call Options ..................................................................135 Ringer Settings ............................................................138 Resetting Your Phone ...................................................139 GSM Services ...............................................................139 Section 9: Multimedia ................................... 145 Multimedia .............................
Table of Contents Place a call while using Mobile Web .............................180 Section 14: VZW with MSN ............................ 181 VZW with MSN .............................................................182 Launch VZW with MSN .................................................182 Exit VZW with MSN .......................................................183 Navigate the Web .........................................................183 VZW with MSN soft keys ....................................
Index ..............................................................
Table of Contents
Section 1: Getting Started Topics Covered • Activating your Phone • Turning Your Phone On and Off • Setting Up Voicemail • Understanding this User Manual Section 1 This section allows you to start using your phone by activating your service, setting up your voice mail, contacting customer support, and getting an understanding of how this manual is put together.
Activating Your Phone If you purchased your phone at a Verizon Wireless Store, it is probably activated and ready to use. If you have upgraded your phone or received a new phone by mail, it probably needs to be activated before you can use it. To activate your phone, follow these steps: Section 1 1. Visit a Verizon Wireless Store and have your phone activated, or visit www.verizonwireless.com and place your cursor on the MY ACCOUNT tab available on the home page. 2.
Setting Up Your Voicemail Note: As with any other radio-transmitting device, do not touch the antenna as it affects call quality and may cause the phone to operate at a higher power level than is necessary. 3. Your service provider’s name momentarily appears in the display and the phone begins searching for a network signal. 4. Once the phone finds a signal, the time, date, and day appear in the display (in CDMA mode only). 5. You’re now ready to place and receive calls.
Voice mail setup (CDMA mode) Note: It is recommended that voice mail be setup while you are in CDMA mode. 1. In standby mode, press and hold or enter or dial your own mobile number to dial voice mail. Section 1 2. Press to interrupt the greeting. 3. Follow the prompts in the new user tutorial to setup your mailbox. Voice mail setup (GSM mode) 1. In standby mode, press and hold , a “+” displays. 2. Press again, then enter your own mobile number to dial voice mail. 3. Press to interrupt the greeting.
Understanding this User Manual Listen to voice mail (GSM mode) 1. In standby mode, press and hold the soft key or dial + and your own mobile number to dial voicemail. After Connecting a recorded message prompts you to press if you have a mailbox on the system. You will then be prompted to enter your 10 digit mobile phone number. 2. Enter your 10 digit mobile phone number. 3. When you hear the voice greeting, press , enter your password, and follow the recorded prompts.
• Tips: Provide quick or innovative methods for performing functions related to the subject at hand. • Fast Facts: Are like snippets from the glossary. Fast facts provides definitions in context and proximity to the menu or feature in question. • Important: Points out important information about the current Section 1 feature that could affect performance, or even damage your phone.
Section 2: Understanding Your Phone Topics Covered • Front View of Your Phone • Open Veiw of Your Phone • Features of Your Phone • Understanding the Display Screen • Installing Your SIMS Card • Battery This section outlines some key features of your phone. It also displays the screen and the icons that will are displayed when the phone is in use.
Section 2 Front View of Your Phone 18
Open View of Your Phone Open View of Your Phone Section 2 Section 2: Understanding Your Phone 19
Features of Your Phone 1. Headset Conncector: Used for hands free equipment. 2. External LCD: This screen displays caller information, signal and battery strength, as well as other indidcators of status. 3. Antenna: Extend for better reception. 4. Display Screen: This screen displays all the information needed to operate your phone. The display icons indicate network status, battery power, signal strength, etc. 5. OK Key: Pressing when navigating through a menu accepts the highlighted choice in the menu. 6.
Features of Your Phone 11. Mobile Web: Press to launch Mobile Web. 12. Message Menu: Allows you to launch Messages menu or Press and hold to automatically dial your voicemail. 13. Microphone: The Microphone allows the other caller to hear you clearly. 14. Charger/PC Data Link Cable Jack: This connector is used to plug in the charging accessories and also connect any available accessory cable to your phone. 15. Alphanumeric Key Pad: Use these keys to enter numbers, letters, and characters 16.
• Flashes to indicate an incoming call or message. • Lights momentarily when you power up the phone and flashes red when the phone is in need of a charge. 22. Speaker: The speaker allows you to hear the other caller and the different ring tones and sounds offered by your phone. Understanding the Display Screen The top line of the display is reserved for icons that indicate network status, battery power, signal strength, and more. The following table lists some display icons and their descriptions.
Understanding the Display Screen No service indicator: Your phone cannot find a signal because you’re outside a service area. You cannot make or receive calls. Wait for a signal or move to an open area to find a signal. This indicator always appears when you first turn on your phone and disappears once service is located. Roaming indicator: Your phone is outside your home area. While roaming, another wireless provider may be handling your call.
IS95-2G (Digital) Protocol: Your phone is using the IS95-2G protocol. This protocol is incapable of high speed data. Vibrate mode: Your phone vibrates upon receiving a call. Battery strength: More black bars indicate a greater charge. When the battery is low, an empty battery icon flashes and the phone sounds an alert, which indicates your phone is about to shut down. Alarm clock: The alarm clock is set. Ringer On: Your phones call ringer is turned on. Ringer off: Your phones call ringer is turned off.
Understanding the Display Screen Dialogue boxes Dialogue boxes prompt for action, inform you of status, or warn of situations such as low memory. Dialogue boxes and their definitions are outlined below. Choice •Example: “Save message draft?” Reconfirm •Example: Delete all received messages?” Performing •Example: “Sending...” “Connecting...
Intalling Your SIM Card Before you can use the GSM features in your phone, you’ll need to install a SIM card. SIM cards are provided by Verizon Wireless. 1. With the battery removed from the phone, insert the SIM card face down into the slot provided. 2. Slide the SIM card as far as possible to the right, beneath the SIM card retaining brackets. Sim retaining Section 2 brackets 3. Once the card is secured in the SIM slot, install the battery as outlined in the following section, then turn the phone on.
Battery Important: Verizon Wireless has provided a unique SIM card to be used with your SCH-A795. To use other SIM cards in your phone, please contact Verizon Wireless for more information. Battery Note: This phone comes packaged with a partially charged rechargeable standard Li-Ion battery. Important: Although the phone can be used while the battery is charging, the battery must be fully charged before first use, otherwise you could damage the battery. 1.
Charge the battery Your phone is powered by a rechargeable standard Li-Ion battery. Only use Samsung-approved charging devices and batteries. Samsung accessories are designed to maximize battery life. Using other accessories may invalidate your warranty and may cause damage. Note: You can use your phone while charging, however, the battery charges faster if the phone is turned off. Section 2 Battery indicator The battery indicator ( ) in the upper-right corner of the display indicates battery power level.
Section 3: Call Functions Topics Covered • Making a Call • Answering a Call • Adjusting the Call Volume • Call Log • Phone Modes • Roaming • Voice Kit • Voice Signal This section allows you to make or answer a call. It also includes the features and functionality associated with making or answering a call.
Making a Call 1. With the phone on, enter the number you wish to call using the keypad. (If you make a mistake whil dialing, press the CLR key to erase one digit at a time or press and hold the CLR key to erase the entire number.) 2. Press to place the call. 3. When you’re finished, close the flip or press end. Dialing emergency numbers You can dial any of the numbers 911, 112, or 999 to place an emergency call.
Making a Call Note: If you dial 112 or 999 while in Int’l (GSM) mode, your phone dials the emergency number immediately (no prompt). Placing a GSM International Calls Call the U.S. from another country 1. In standby mode, press and hold to display the “+” symbol. The “+” symbol automatically inserts the exit code for the country from which you are calling. 2. Press to insert the U.S. country code, then enter the area code and number. 3. Press . The number is dialed. Call the U.S.
3. Enter the area code, without the leading zero, followed by the number of the person you are calling. Please note there are some exceptions for leaving out the leading zero such as Italy, Finland and Spain. Placing a CDMA International calls Call another country from the U.S. (CDMA Only) Note: Your phone must be in Verizon (CDMA) mode to place calls from within the United States. 1. In standby mode, enter the three-digit exit code (011) for the United States. 2.
Answering a Call • Calling voicemail from Mexico: Dial 001, plus your ten-digit wireless number. Once you hear the recorded prompt, press and enter your passcode. Note: For more information on International Dialing see VerizonWireless.com. Answering a Call When you receive a call, the phone displays one of the following: • If the caller can be identified, the caller’s number (or name if it’s in your Phonebook) appears in the display.
• Press the right soft key ( ) Ignore to send the call directly to voicemail. • Press to answer the call. Receive calls while using Get It Now or VZW with MSN (Verizon Wireless Network only) If you receive a call while using a BREW application or VZW with MSN, the application is put on hold during the call. Once the call ends, your session resumes. Adjusting the Call Volume In standby mode, repeatedly press the volume key ( ) down until the Call Volume Level desired appears in the display.
Call Log • for Missed. Recent Calls menu options While viewing recent calls, you have options such as saving recent call numbers to your Phonebook, sending messages to recent call numbers, and prepending (editing) numbers before saving. 1. In standby mode, press the left soft key ( then press (Recent Calls). ) Menu, 2. Press the corresponding number on the keypad to view call logs for the following call types: • • • for Received, for Dialed for Missed 3.
Tip: To quickly view recently dialed and received calls, press your phone in standby mode. with Delete Call Logs Use Delete Call Logs to delete calls from any or all call logs. 1. In standby mode, press the left soft key ( ) Menu, then press (Recent Calls), (Delete Call Logs). 2. Use the navigation key to highlight the call log type that you wish to delete, then press . You’re prompted to confirm the erasure. 3.
Phone Modes • Total Dialed: View duration of calls dialed from your phone. • Lifetime: View the duration of all calls on your phone since activation (Life Time timers cannot be erased). • Reset Timer: reset the Last Call Timer, Total Received, or Total Dialed timers. 2. Use the navigation key to highlight the desired sub menu. 3. Press to perform the function for the highlighted option or to enter its sub menu and make changes as desired.
2. Use the navigation keys to highlight the desired mode of operation, then press . A dialogue box appears in the display asking if you wish to change modes. 3. Press the left soft key ( press the right soft key ( Mode options list. ) Yes to change modes, or ) No to return to the Phone 4. If you pressed Yes, the phone restarts and powers up in the selected mode of operation. Text entry mode Enter content using any of the four text entry modes. 1. At any text entry screen, press left soft key ( ) Option.
Phone Modes Silent mode Silence the tones your keypad makes whenever you press a key using the Silent Mode feature. Enter Silent mode In standby mode, press and hold . Entering Silent Mode briefly appears in the display and your phone returns to standby mode. Exit silent mode • In standby mode, press and hold . Exiting Silent Mode briefly appears in the display and your phone returns to standby mode.
2. Use the navigation key to highlight On or Off, then press . If you select On, a message appears in the display alerting you that all call functions will be disabled. 3. Press the left soft key ( ) Yes, or press the right soft key ( ) No to exit and return to the Airplane Mode selection sub menu. TTY Mode Your phone is fully TTY/TDD compatible. TTY/TDD equipment is connected to your phone through the headset connector on the top of the phone.
Roaming Roaming What is Roaming Your phone can roam on other digital networks. Roaming occurs when you travel outside a pre-designated coverage area. The roaming icon appears on when in roaming is active, and extra charges may apply when making or receiving a call. Note: Some features may be unavailable while roaming. Roaming also consumes additional power from the battery requiring more frequent charges. Roaming Options Roam Option sets roaming preferences if you move in and out of your home network.
then press (Settings), (Roam Option). (Call options), 2. Use the navigation key to highlight your roam option preference, then press . Your settings are saved. Note: This feature is only available on the Verizon Wireless network. Voice Kit Voice recognition capabilities of the SCH-a795 are exceptional due to advanced, speaker-independent technology. This means there is no longer a need to “train” your phone to understand your voice.
Voice Kit 3. Press to enter the highlighted sub menu. The following three sections describe each Voice Kit sub menu in greater detail. Voice Memo Voice Memo allows you to record voice memos for later playback. You can also record the caller on the other end of the line during a phone conversation. 1. In standby mode, press the left soft key ( ) Menu, (Voice Memo), 2. Press (Voice Kit), (Record). The phone prompts, “Please record after the beep.” 3. Wait for the beep, then start speaking.
7. Press to perform the option. Review and delete voice memos If you’ve saved any memos, you can review them anytime. 1. In standby mode, press the left soft key ( ) Menu, then press (Voice Kit), (Voice Memo), (Review). A list of saved memos appears in the display. 2. Use the navigation key to highlight the memo you wish to review, then press . The memo title, length, size, and time/date the recording took place appear in the display. 3.
Voice Kit Voice Setting Use the Voice Setting sub menus to select the method for Voice Kit activation, or to adapt and reset voice recognition for digits to your voice. 1. In standby mode, press the left soft key ( ) Menu. 2. Press (Voice Kit), (Voice Setting). The sub menus listed in the following table appear in the display. • Choice Lists: When voice signal doesn’t recognize a name or number correctly, you are provided a list of alternative choices.
Voice Kit Active This menu option allows you to set the key or action that launches voice kit. To change the current setting, follow these steps. 1. In standby mode, press the left soft key ( ) Menu. 2. Press , . The Voice Kit Active menu displays, and the following options are available. • Voice Key Only • Voice Key /Folder • Voice Key /EarMic 3. Use the navigation key to highlight the option you want, then press to save and exit.
Voice Signal 2. After the phone beeps, say the name of the command that you wish to perform. The Voice Signal commands listed in the following table are available • Call: Lets you dial a phone number by saying a name saved in your contact list or by saying the digits in the telephone number. • Send Text: This command provides access to your messaging feature, allowing you to send text and multimedia messages. • Lookup: Lets you retrieve contact information for any entry in your contacts list.
• The phone recognizes only valid seven or ten-digit North American phone numbers, optionally preceded by the digit “1.” • If you are experiencing frequent problems with Voice Dial recognizing your commands, try adapting it to your voice, which greatly improves its accuracy. See "Digit Dial Adaptation" on page 50 for more information. Dialing a name 1. In standby mode, press . “Say a Command” appears in the display and is pronounced through the speaker. 2. Say “Call.
Voice Signal Note: If the name that you pronounced has more than one associated number, the phone displays the different locations (such as “home” or “work”) and prompts you, “Which number?” In this case, pronounce the location that you want to call. The phone dials the number. 5. The phone repeats what you said and then prompts, “Connecting” and dials the number.
Use Digit Dial 1. In standby mode, press . “Say a Command” appears in the display and is pronounced through the speaker. 2. Say “Call.” The phone prompts, “Say the name or number.” 3. Pronounce the number naturally and clearly. The phone may display one or more numbers on the screen and prompt you for confirmation. If the phone asks “Did you say” followed by the correct number, say “Yes.” The phone dials the number. If the phone asks “Did you say” followed by any incorrect numbers, say “No.
Voice Signal Tips for adapting Digit Dial • Adapt digits in a quiet place. • Make sure you wait for the beep before starting to speak. • Speak clearly, and say each digit distinctly. • If you make a mistake while recording a sequence of digits, or if there is an unexpected noise that spoils the recording, rerecord that sequence. Adapt Digit Dial to your Voice 1. In standby mode, press the left soft key ( ) Menu, 2.
6. After confirming that the recording sounds ok, repeat the recording process with the next set of digits. After six sets of digits, the phone asks whether you want to do more adaptation. Answer “Yes.” 7. Repeat steps 4-6 for another six sets of digits. After the sixth set of digits, the phone indicates that adaptation is complete. Reset Digit Dial Adaptation This option erases an adaptation and resets Digit Dial to its original state. 1.
Voice Signal After you say a name, you may be prompted, "Did you say?" followed by the first of up to three names. To confirm a name, wait for the beep and then say “Yes.” If there is no match found, the phone responds with “Sorry, no match found.” Sending messages The Send command allows you to send a text message. Send a Text Message 1. In standby mode, press . “Say a Command” appears in the display and is pronounced through the speaker. 2. Say “Send Text.” Your phone prompts, “Say the name or number.
Opening applications The Go To command allows you to open an application or to quickly access several menus on your phone. 1. In standby mode, press . “Say a Command” appears in the display and is pronounced through the speaker. 2. Say “Go To” followed by the application or menu item you want. For example, say, “Go To Voice Mail.” Your Voice Mail is activated. Note: To see a list of applications or menu items, say “Go To” but do not specify a destination.
Voice Signal • Signal: Lets you check the current signal strength received by your phone. • Network: Lets you check the current network coverage for your phone. • Battery: Lets you view your phone’s current battery level. • My Phone #: Displays your phone’s telephone number. Your phone displays the information requested above and plays it through your speaker.
Section 3
Section 4: Menu Navigation Section 4 Topics Covered • Menu Navigation • Menu Outline This section explains the menu navigation for your phone. It also includes an outline of all the available menus associated with your phone.
Section 4 Menu Navigation Access menus using the navigation key in tandem with the two soft keys ( ), or use a shortcut. 1. In standby mode press the left soft key ( ) Menu. The first of several menus appear in the display. Note: When you press the left soft key ( ) Menu, more than one menu may appear in the display. This setting can be modified in the Settings > Display > Style sub menu. 2. Use the navigation keys to browse phone menus. 3.
Menu Navigation Example: Press the left soft key ( ) for Menu, then press (Planner), (To Do List). In standby mode, press a navigation key (as illustrated below) to launch its corresponding application. The In-Use Options Access numerous menus and features even while in a call. Note: If the call is disconnected while accessing the In-Use Option, the InUse Option disappears from the display and the phone eventually returns to standby mode.
Section 4 1. While in a call, press the left soft key ( ) Option. The following menu items appear in the display. • Contacts: Open the Phonebook and view contacts. • Recent Calls: Display your recent incoming and outgoing calls. • Message: Open the Messages menu. • Key Tone On/Off: Turn keypad tones on or off. • My Phone #: View the phone number asigned to yor phone by Verizon Wireless. • Phone Info: View the software and hardware version information for your phone.
Menu Outline Phonebook1 Section 4 Find1-1 New1-2 Group1-3 My Name Card1-4 Send V-Card1-5 My Name Card1-5-1 Phonebook1-5-2 My Phone #1-6 Memory Info1-7 Delete All1-8 Recent Calls 2 Received2-1 Dialed2-2 Missed2-3 Delete Call Logs2-4 Received 2-4-1 Dialed 2-4-2 Missed 2-4-3 All Calls 2-4-4 Call Timers2-5 Last Call Timer2-5-1 Total Received2-5-2 Section 4: Menu Navigation 61
Total Dialed2-5-3 Section 4 Lifetime 2-5-4 Reset Timer2-5-5 Messages 3 New Text Msg3-1 New Pix Msg3-2 Voice Mail3-3 Inbox3-4 Outbox3-5 Saved/Draft3-6 Web Alert3-7 Msg Setting3-8 Text Msg Setting3-8-1 Quick Text 3-8-1-1 Save In Outbox 3-8-1-2 Insert Signature 3-8-1-3 Auto Play 3-8-1-4 Direct View3-8-1-5 Pix Msg Setting3-8-2 Quick Text 3-8-2-1 Save In Outbox3-8-2-2 Delivery Ack3-8-2-3 Retrieval Mode3-8-2-4 62
Menu Outline Entry Mode3-8-3 Callback #3-8-4 Section 4 Auto Delete3-8-5 Voice Mail #3-8-6 GSM Setting (GSM only)3-8-7 Setting1 3-8-7-1 Setting2 3-8-7-2 Reply Path3-8-7-3 Delivery Reports3-8-7-4 Sending Setting3-8-7-5 Voice Mail #3-8-7-6 Bearer Selection 3-8-7-7 Memory info3-9 Delete All3-0 Old Inbox 3-0-1 New Inbox3-0-2 Outbox 3-0-3 Draft 3-0-4 Voicemail 3-0-5 Web Alert 3-0-6 SIM 3-0-7 All Msgs 3-0-8 Section 4: Menu Navigation 63
Get It Now (CDMA Only)4 Section 4 Launch Now4-1 Mobile web (CDMA Only)5 Launch Web5-1 Multimedia 6 Image Gallery6-1 Sounds6-2 Pix Template6-3 Animelody Gallery6-4 Memory Info6-5 Delete All6-6 Image Gallery6-6-1 Sounds 6-6-2 Animelody Gallery 6-6-3 All Galleries6-6-4 Settings 7 Phone Mode7-1 Profile7-2 Display7-3 Language 7-3-1 Style 7-3-2 Animation 7-3-3 Banner 64 7-3-4
Menu Outline Backlight 7-3-5 Service LED7-3-6 Section 4 Auto Hyphen7-3-7 Security7-4 Lock Phone7-4-1 Change Lock7-4-2 Emergency #7-4-3 Voice Privacy7-4-4 Restriction 7-4-5 Outgoing Call7-4-5-1 Incoming Call7-4-5-2 Phonebook7-4-5-3 Delete Memory7-4-6 Reset Phone7-4-7 Pin Menu 7-4-8 PIN Check7-4-8-1 Change PIN7-4-8-2 Call Options7-5 Answer Options7-5-1 Auto Retry 7-5-2 Data 7-5-3 Airplane Mode 7-5-4 Roam Option 7-5-5 Section 4: Menu Navigation 65
TTY Mode 7-5-6 Section 4 Shortcut List7-6 Location (CDMA Only)7-7 GSM Services (GSM Only)7-8 Call Diverting7-8-1 Call Barring7-8-2 Call Waiting7-8-3 Select network 7-8-4 Caller ID 7-8-5 Closed User Group7-8-6 Phone Info7-9 Planner 8 Calendar8-1 To Do List8-2 Alarm Clock8-3 Time/Date8-4 Memo Pad8-5 World Time8-6 Calculator8-7 Voice Kit 9 Voice Memo9-1 66 Record 9-1-1 Review 9-1-2
Menu Outline Delete All 9-1-3 Voice Setting9-2 Section 4 Choice Lists9-2-1 Digit Dialing9-2-2 Sensitivity 9-2-3 Sound9-2-4 About9-2-5 Voice Kit Active9-3 Section 4: Menu Navigation 67
Section 4
Section 5: Entering Text Topics Covered • Changing the Text Input Mode • Using T9 Mode • Entering Upper and Lower Case • Entering Symbols • Entering Numbers Section 5: Entering Text 69 Section 5 This section outlines how to select the desired text input mode when entering characters into your phone. This section also describes how to use the T9 predictive text entry system to reduce the amount of key strokes associated with entering text.
Changing the Text Entry Mode 1. While composing a message, press the left soft key ( ) Option to display a pop-up menu with the following options. Section 5 • ABC: Choose the method of text entry. • Quick Text: Choose from up to 17 messages (11 are precomposed as factory defaults, but all 17 can be edited). • Add Number: Add a number from your Phonebook. • Send Option: Choose the priority, validity, privacy, and other options for your message. • Save in Draft: Save the message to your Draft folder.
Entering Upper and Lower Case 2. Enter the phone number of the recipient, then press . 3. Press the left soft key ( ) Option to display a pop-up menu containing text entry mode options. 4. ABC is highlighted. Use the left/right navigation keys to display T9 Word, then press .
Entering Symbols Symbol mode enables you to enter symbols such as @ or % into a text message. 1. In standby mode, press the left soft key ( ) Menu, then press (Messages), (New Text Msg) to compose a new text message. 2. Enter the phone number of the recipient, then press . Section 5 3. Press the left soft key ( ) Option to display a pop-up menu containing the following options. • ABC: Choose the method of text entry.
Entering Numbers 7. Repeat steps 3 through 6 to insert as many symbols into your message as desired. Entering Numbers Enter numbers into a text message while in number mode (123). See "Changing the Text Entry Mode" on page 70 for instructions on changing text entry modes. • While in 123 mode, press the key containing the number that you wish to insert into your message.
Section 5
Section 6: Understanding Your Phonebook Topics Covered • Opening Phonebook Menu • Adding a Contact • Adding Pauses • Phonebook Groups • Finding a Phonebook Entry • Editing an Existing Phonebook Entry • Deleting a Phonebook Entry • Storing Numbers After a Call • Manage SIM Phonebook • Delete All Section 6 • My Name Card • Finding My Phone Number • Memory Information • Speed Dialing This section allows you to manage your daily contacts by storing their name and number in your phonebook.
Opening Phonebook Menu The Phonebook menu provides access to powerful features such as adding Groups, creating and sending Vcards, and viewing the phone number assigned to your phone by Verizon Wireless. 1. In standby mode, press the left soft key ( ) Menu, then press (Phonebook). The Phonebook sub menus listed appear in the display. • Find: Find a phone number By Name, By Entry, or By Group. • New: Add a number, e-mail, or web address to your Section 6 Phonebook. • Group: Rename one of your five groups.
Opening Phonebook Menu Phonebook Icons You can assign a host of entries to a Phonebook contact. The icons in the following table represent all available entry types Name icon. Enter the name for the entry in this field. Location icon. Assign a memory location for the entry in this field. Mobile icon. Enter a mobile number for the entry in this field. Home icon. Enter a home number for the entry in this field. Work icon. Enter the work number for the entry in this field. Fax icon.
Company icon. Enter the name of the company for the entry in this field. Job Title icon. Enter a job title for the entry in this field. Memo icon. Enter a text memo for the entry (up to 48 characters) in this field. SIM icon. The highlighted entry is saved to your SIM card. Adding a Contact When you add information to your Phonebook, you can add it as a new entry or as an existing entry. Method 1 Section 6 1. In standby mode, press the left soft key ( ) Menu, then press (Phonebook), (New).
Adding a Contact Note: Once you’ve entered a character into any of the type fields, press the left soft key ( ) Option to display a pop-up menu which allows you to enter a P Pause or T Pause. 6. When you’re finished entering information for the entry, press to save the entry to your Phonebook. Method 2 You can add new numbers to the Phonebook by simply entering the number while the phone is in standby mode, then following the necessary prompts to complete the process. 1.
6. Enter a name for the entry using the keypad. Press the left soft key ( ) Option if you wish to select a different method of text entry, such as ABC, T9 Word, Symbol, or 123. 7. When you’re finished entering information for the entry, press . The entry is saved to your Phonebook. 8. If you selected Add Existed Entry, the Phonebook opens in Find mode. Use the navigation key to browse through entries, or enter the name of the entry using the keypad. 9.
Adding Pauses (CDMA only) Store pauses to a Phonebook entry (CDMA only) 1. In standby mode, enter the number you wish to store. 2. Press the left soft key ( ) Option. The following pause menu options appear in the display. • P pause • T pause Note: P pause is a hard pause (awaits input from you) and T pause is a two-second pause. 3. Use the navigation key to highlight the pause option of your choice. 4. Press to enter the highlighted pause into your number sequence. 5.
2. Enter the number you wish to call. 3. Press the left soft key ( ) Option to display the pause option pop-up menu. 4. Use the navigation key to highlight the desired pause option. 5. Press to enter the highlighted pause into your number sequence. 6. Press to call the number. Note: Store pauses along with the number if you plan to call the number frequently. Phonebook Groups Section 6 You can place any Phonebook entry into one of five categories, called “Groups.
Phonebook Groups • Business 2. Use the navigation key to highlight the desired group, then press to enter the group and view its contents. Move an entry to another group 1. In standby mode, press the left soft key ( ) Menu, then press (Phonebook), (Group). The following groups appear in the display. • No Name • Family • Friends • Colleague • Business 2. Use the navigation key to highlight the group containing the entry that you wish to move, then press . 3.
Create a new group In addition to the five groups already in your phone, you can create additional groups (a maximum of 10). New groups can be named anything you like as long as their names are within the 12-character limit. 1. In standby mode, press the left soft key ( ) Menu, then press (Phonebook), (Group). Your existing groups appear in the display. 2. Press the left soft key ( ) Option. A pop-up menu appears in the display with New Group highlighted. 3. Press .
Phonebook Groups 4. Use the navigation key to highlight Rename Group, then press . The Rename dialogue box appears in the display. 5. Enter a name for the group using the keypad. Press the left soft key ( ) Option to select the text entry mode. 6. Press . Your changes are saved. Delete a group The five default groups cannot be deleted. However, any of the groups that you create can be deleted anytime. 1. In standby mode, press the left soft key ( ) Menu, then press (Phonebook), (Group).
Send a text message to members of a group Use Send Message in the Group feature to send a message to as many as 10 members of a group at once. Note: This feature works in Verizon (CDMA) mode only. Text messaging availability varies when roaming off the Verizon Wireless Network. 1. In standby mode, press the left soft key ( ) Menu, then press (Phonebook), (Group). Your existing groups display. 2. Use the navigation key to highlight the group to which you want to send a message. 3.
Phonebook Groups 8. Press . The list of addresses (or numbers) to which the message will be delivered appears in the display. 9. Press display. . The message entry screen appears in the 10. Enter the content of your message using the keypad. 11. To send the text message, press . Send a Pix Msg to members of a group Note: Only available within Verizon Wireless Enhanced Services Area. 1. Follow steps 1 through 8 in the previous section entitled “Send a text message to members of a group” . 2.
7. Once you’ve finished adding the desired content to your Pix Msg, you’re returned to the Pix Msg composer. 8. Press to send the Pix Msg. The Pix Msg is sent to the intended recipients. Finding a Phonebook Entry From standby mode, you can quickly open the Contacts list. Contacts is a quick way of viewing entries you’ve stored in the Phonebook. • In standby mode, press the right soft key ( ) Contacts. Your list of Phonebook entries appears in the display.
Deleting a Phonebook Entry 7. Press symbols. to backspace and delete numbers, text, or 8. Press and hold highlighted field. to erase all numbers in the 9. Use the keypad to re-enter numbers, text, or symbols. 10. When you’re finished editing the entry, press changes are saved. . Your Deleting a Phonebook Entry 1. In standby mode, press the left soft key ( ) Menu, then press (Phonebook), (Find). 2.
Delete All CDMA mode Delete All (in CDMA mode) allows the deletion of all entries in your Phonebook but not those on your SIM card. 1. In standby mode, press the left soft key ( ) Menu, then press (Phonebook), (Delete All). You’re prompted to enter the lock code. 2. Enter the lock code. The default lock code is the last four digits of your phone number. The phone prompts you to confirm the deletion of all entries. 3.
Storing numbers after a call 3. Use the navigation key to highlight an option. Press to perform the function for the highlighted option. 4. When asked to confirm deletion of the selected memory, press the left soft key ( ) Yes to continue or press the right soft key ( ) No to return to the Phonebook menu. Storing numbers after a call Once you’ve finished a call, you can store the number of the caller to your Phonebook.
entries, and even copy them to the Phonebook while in Verizon (CDMA) mode. However, to edit or save entries on the SIM card, you must be in Int’l (GSM) mode. Store new entries to the SIM card 1. With the phone in Int’l (GSM) mode (and standby mode), enter the number that you wish to store to the SIM card. 2. Press (Save). A pop-up menu appears in the display with New Entry highlighted. 3. Press display. . The Select Type screen appears in the 4.
Manage the SIM Phonebook Note: The SIM card and phone icon ( entries stored on the SIM card. ) appears to the right of any 2. Use the navigation key to highlight the SIM entry that you wish to edit or delete. 3. Press the left soft key ( ) Option. A pop-up menu with the options listed in the following table appears in the displayNew: Store a new entry to the Phonebook or SIM card. • • • • • • New: Add new entry to Phonebook or SIM card. Find: Find entries stored in the Phonebook or SIM card.
• By Name: Search the Phonebook alphabetically by name. Enter the name of the person as they are entered in your Phonebook (last name first, etc.). • By Entry: Search the Phonebook by entry number.This is the same number assigned to Speed dial (002, 003, etc.) • By Group: Search the Phonebook by selecting from one of the five available groups. This option only works if you’ve added entries to one of the groups. • SIM Only: Search for entries on the SIM card (only).
Manage the SIM Phonebook By Entry This option allows you to find a stored entry by location (or speed dial) number. 1. In standby mode, press the left soft key ( ) Menu, then press (Phonebook), (Find). 2. Use the left/right navigation keys to display by Entry. 3. Enter the location number using the keypad. Entries appear in the display below the entry field. 4. Use the navigation key to highlight the entry. Press to display information about the entry. 5.
5. Use the navigation key to highlight the desired entry. 6. Press to display information about the entry. 7. Press the left soft key ( options listed. ) Option to display the • Edit: Edit details of the highlighted name. • Delete: Erase the name and associated information. 8. Use the navigation up/down keys to highlight an option, then press to enter that option’s sub menu. SIM Only Use this option to find entries stored solely on your Verizon Wireless SIM card. 1.
Speed Dialing Speed Dialing Note: 1-Touch, 2-Touch, and 3-Touch dialing allows you to call numbers stored in your Phonebook quicker. Speed dialing allows you to press and hold a key (or keys) to dial the number associated with those key(s). There are three types of speed dialing; 1-touch, 2-touch, and 3-touch dialing. Note: is reserved for voicemail. 1-touch dialing Call phone numbers assigned to memory locations 002 009 by pressing and holding the any of the 2 - 9 keys.
Assign a speed dial location 1. In standby mode, press the left soft key ( ) Menu, then press (Phonebook), (Find). 2. Use the left/right navigation keys to display and select the Find method (By Name, By Group, etc.). 3. Enter the information you want to find into Find or use the navigation keys to highlight the entry you want, then press . 4. Use the navigation keys to highlight the speed dial location field and press the left soft key ( ) Edit. 5. Enter the speed dial location using the keypad.
My Name Card 5. Use the navigation key to highlight the SpeedDial field, then press the left soft key ( ) Edit. 6. Use the left and right navigation keys to select the desired number (type) for speed dialing. 7. Press . Your changes are saved. My Name Card My Name Card allows you to create a virtual business card. Once completed, you can send the card to recipients as a V-card attachment. 1. In standby mode, press the left soft key ( then press (Phonebook), (My Name Card). ) Menu, 2.
Note: The following steps outline sending a V-card by going through each and every option for adding images, sounds, and messages to the V-card. If you wish to send the V-card without such additional information, press after step 4. 1. In standby mode, press the left soft key ( ) Menu, then press (Phonebook), (Send V-card). A pop-up menu appears in the display with My Name Card highlighted. 2. Press to select My Name Card or press to select and send an entry from your Phonebook. 3.
My Name Card 8. Press the right navigation key to display the Add Sound menu. Choose from four options: • • • • Preloaded Melody My Sounds Voice Memo Record Voice Note: If you choose Preloaded Melody, you can only send midi-type sound files and not the melody files. Once you’ve selected a sound from the Add Sound menu, you’re returned to the Pix Msg composer. 9. Press the down navigation key to highlight the Add Image field.
Finding My Phone Number My phone # displays the ten-digit number assigned to your phone by Verizon Wireless. • In standby mode, press the left soft key ( ) Menu, then press (Phonebook), (My Phone #). The phone number assigned to your phone by Verizon Wireless appears in the display. Memory Information Memory Info displays the Total, Used, Reserved, and Free memory for the Phonebook and SIM Memory. Note: Reserved memory is only available in the Phonebook and doesn’t appear under SIM Memory.
Section 7: Messaging Topics Covered • Types of Messages • Web Alerts • Message Folders • Retrieving New Messages • Voicemail • Creating and Sending New Messages • Changing Message Settings This section allows you to send or receive different types of messages. It also includes the features and functionality associated with messaging.
Types of Messages The a795 is capable of sending email and text messesages. Send email or text messages by simply entering the email address or the phone number of the recipient in the To: <.........> or Send To field when creating a new message. Web Alerts Note: This feature is currently unavailable outside of the United States. Occasionally, Verizon Wireless may send notifications to your phone in the form of Web Alerts. These alerts may contain information regarding new services or updates.
Message folders 3. Press to view contents of the highlighted message. 4. While viewing a message press the left soft key ( Option to display the options listed. • • • • ) Reply: Reply to the message. Forward: Forward the message to another recipient. Delete: Delete the message and its contents. Save Address: Save the number of the sender to your Phonebook as a new entry or add to an existing entry. • Save Text: Save only the text within a message.
• Resend: Resend the message to the original recipient. • Delete: Delete the message. • Save Msg: Save the message to the Drafts folder. 4. Use the navigation key to highlight the desired option. 5. Press option. to perform the function for the highlighted Messages and lock mode Your phone still receives messages while in Lock Mode. The time and date of the message appear in the display, but you cannot access the message until you enter the lock code.
Message folders 4. Scroll down with the navigation key until Save in Draft is highlighted, then press . A confirmation message appears in the display and your message is saved to the Saved/Drafts folder. View and edit Draft messages 1. In standby mode, press the left soft key ( ) Menu, then press (Messages), (Saved/Draft). Any draft messages that you’ve composed appear as a list in the display. 2. Use the navigation key to highlight the message that you wish to view, then press .
• Save In Draft: Save the message (with changes) back to the Drafts message folder. • Edit Send To: Edit the Send To number for the message. • Save Text: Save only the text in the message, if the message contains media or other content. 6. Use the navigation key to highlight the desired option. Press to perform the function for the highlighted option. 7. Once you’ve returned to the message composer, press to send the message, if desired.
Voicemail 2. Press the right soft key ( ) View to open the message, where you have the option to Reply, Forward, Delete, Save Address, Save Text, or Save Msg. Voicemail New voicemail alerts are sent via an SMS text message. These messages indicate how many new and urgent voicemails are in your box. When all voicemails has been listened to, a message is sent notifying you there are zero new messages waiting. Open the text message to view the number of new and urgent voice messages in your voice mailbox.
Creating and Sending New Messages This section guides you through the procedure to send various types of messages. Creating and Sending Text messages Note: May not be available on all GSM networks and when roaming off the Verizon Wireless Network. 1. In standby mode, press the left soft key ( ) Menu, then press (Messages), (New Text Msg) to compose a new text message. 2.
Creating and Sending New Messages 4. Compose your message using the keypad. At any point while composing a message, press the left soft key ( ) Option to display the options listed in the following table. • ABC: Choose the method of text entry. • Quick Text: Choose from up to 17 messages (11 are precomposed as factory defaults, but all 17 can be edited). • Add Number: Add a number from your Phonebook. • Send Option: Choose the priority, validity, privacy, and other options for your message.
• Priority: Assign a priority to your message. • Validity: Select the period of time that you wish the message to be available to the recipient. After the set period of time, your message is recalled. • Privacy: Choose the desired level of privacy for your message. • Insert Signature: Insert your pre-composed signature into the message. • Callback #: Insert a number into your message for the recipient to call you back. • Def. Delivery: Choose when you wish your message to be sent. 3.
Section 8: Changing Your Settings Section 8 Topics Covered • Display Settings • Profile Settings • Shortcut • Security Settings • Location Settings • Changing Message Settings • Call Options • Ringer Settings • Resetting Your Phone • GSM Services This section explains the menu navigation for your phone. It also includes an outline of all the available menus associated with your phone.
Section 8 Display Settings The Display sub menu affects the menu style, standby mode animation, backlight settings, and more. 1. In standby mode, press the left soft key Menu, then press (Settings), (Display). The Display sub menus listed in the display • Language: Choose the display language (English or Español) • Style: Choose Dynamic to animate your menus or choose Basic to view menus in a list format.
Display Settings Language 1. In standby mode, press the left soft key Menu, then press (Settings), (Display), (Language). 2. Use the navigation key to select the language of your choice, then press . Style The Style sub menu allows you to choose the format in which main menus appear in the display. 1. In standby mode, press the left soft key Menu, then press (Settings), (Display), (Style). 2. Use the navigation key to highlight Basic or Dynamic, then press .
Section 8 3. Use the left/right navigation keys to choose between Power On (Off) 1 or Power On (Off) 2, then press Your settings are saved. . Choose the Wallpaper 1. In standby mode, press the left soft key ( ) Menu, then press (Settings), (Display), (Animation). 2. Use the navigation key to highlight Wallpaper, then press . Main LCD and Sub LCD appear in the display. 3. Use the navigation key to highlight Main LCD or Sub LCD, then press . 4.
Display Settings Banner 1. In standby mode, press the left soft key ( ) Menu, then press (Settings), (Display), (Banner). Note: Press and hold to erase an existing banner, if necessary. 2. Enter a word or short phrase (12 characters or less) to appear in your phone’s display when the phone is in standby mode. 3. Press to save the new banner. Backlight Set the backlight for the display or keypad to remain on for a specified period of time or to remain on as long as the flip is open.
Section 8 • Keypad: Set the time for which the keypad backlight remains on after a period of inactivity. Optional settings are 5, 10, 15 seconds, and Folder Open • Power Save: With Power save On and the flip closed (while not in a call), the external LCD turns off to conserve power.
Profile Settings 2. Use the navigation key to highlight On or Off, then press . Your settings are saved. Auto hyphen (CDMA Only) Auto Hyphen automatically hyphenates phone numbers as they are entered. For example: 580-437-0000. 1. In standby mode, press the left soft key ( ) Menu, then press (Settings), (Display), (Auto Hyphen). On and Off appear in the display. 2. Use the navigation key to highlight On or Off, then press . Your settings are saved.
Section 8 • Drive: Default settings for ringtones and alarms are set to levels that will catch your attention while driving. • Outdoor: Default settings for ringtones and alarms are set to the highest audible level. 2. Highlight the profile that you want to select or edit. 3. To select the profile for use, press , or to edit the profile, press the left soft key ( ) Edit. These sub menus appear in the display • Volume/Vibrate: Set the volume level or vibrate setting for calls and alarms.
Shortcut List 6. Press to return to the Profile sub menu or press to return to standby mode. Shortcut List allows you to select from up to seven applications that appear in the display when you press the up navigation key in standby mode. 1. In standby mode, press the left soft key ( ) Menu, then press (Settings), (Shortcut List). The Shortcut List sub menu appears in the display. 2. Press ( ) New. A list of applications and menus appears in the display. 3.
Section 8 then press (Settings), (Security). You’re prompted to enter the lock code. The default lock code is the last four digits of your telephone number. 2. Enter the Lock Code. Several security sub menus appear in the display. 3. Press the display (Lock Phone). The options listed appear in • Never: The Lock Code is never required. • Power On: The Lock Code is required whenever you power up the phone. • Now: Your phone returns to standby mode.
Security Settings 4. Enter the new lock code again for confirmation. Note: Your phone does not allow you to view the lock code for obvious security reasons. If you change the lock code, be sure to write down or memorize the new code. Emergency # Note: Emergency number 911 is hard-coded into your phone. You can dial this number any time, even when the phone is locked or restricted. If you call 911 an audible tone is heard and an emergency prompt appears in the display for the duration of the call.
Store emergency numbers Section 8 1. In standby mode, press the left soft key ( ) Menu, then press (Settings), (Security). You’re prompted to enter the lock code. The default lock code is the last four digits of your telephone number. 2. Enter the lock code, then press (Emergency #). 3. Press or to open one of the empty emergency number slots for editing. Note: Emergency numbers 911, #911, *911, 112, and 999 cannot be edited. 4. Enter the emergency number (up to 32 digits in length). 5.
Security Settings • If you press the left soft key ( ) Yes, your phone dials the emergency number 112 or 999. • If you press the right soft key ( ) No, the call is discontinued and your phone returns to standby mode. Note: If you dial 112 or 999 while in Int’l (GSM) mode, your phone dials the emergency number immediately (no prompt). Voice Privacy Note: This feature is only available on the Verizon Wireless network.
Section 8 Restriction(CDMA Only) Note: This feature is currently unavailable outside of the United States. Restriction allows you to restrict outgoing and incoming calls. You can also restrict access to your Phonebook. 1. In standby mode, press the left soft key ( ) Menu, then press (Settings), (Security). You’re prompted to enter the lock code. The default lock code is the last four digits of your telephone number. 2. Enter the lock code, then press (Restriction). 3.
Security Settings Phonebook Recent Calls Messages Multimedia Planner Voice Kit Section 8 • • • • • • 3. Use the navigation key to highlight the memory type that you wish to mark for deletion, then press the left soft key ( ) Mark or press the right soft key ( ) Back to return to the selection list. 4. Continue to highlight and mark as many memory types for deletion as desired. 5. Press ( ) Del to delete the selected memory types. You’re prompted for confirmation. 6.
Section 8 PIN Menu Note: PIN is an acronym for Personal Identity Number. The PIN number accompanies your SIM card, which is provided by Verizon Wireless. The PIN code protects the SIM card and phone from unauthorized access. The PIN code can be 4-8 digits in length. After three successive incorrect entries the PIN code is blocked and you’ll be asked to enter the PUK code. PIN Check With PIN Check enabled, your phone requests entry of the PIN1 code upon power-up.
Location Settings Change PIN Use the Change PIN sub menu to change the 4 to 8 digit PIN code assigned to your SIM card by Verizon Wireless. 1. In standby mode, press the left soft key ( ) Menu, then press (Settings), (Security). You’re prompted to enter the Lock code, which by default is the last four digits of your phone number. 2. Enter the Lock Code for your phone, and press (PIN Menu). 3. Use the navigation key to highlight Change PIN, then press . 4.
Section 8 The Location (GPS) setting identifies your location to the network. You can fully enable this setting or set GPS to work only in the case that you dial 911 from your phone. 1. In standby mode, press the left soft key ( ) Menu, then press (Settings), (Location). The settings listed in the display • Location On: GPS location setting is on wherever the feature is available. • 911 Only: GPS location setting is on whenever you dial 911 only. 2. Use the navigation key to highlight an option. 3.
Changing Message Settings Phone Info 1. In standby mode, press the left soft key ( ) Menu, then press (Settings), (Phone Info). The software and hardware information for your phone appears in the display. Changing Message Settings The Msg Setting sub menu allows you to define default settings for all message types. Text Msg Setting 1. In standby mode, press the left soft key ( ) Menu, then press (Messages), (Msg Setting), (Text Msg Setting).
Section 8 Pix Msg Setting Note: This feature is currently unavailable outside of the United States. 1. In standby mode, press the left soft key ( ) Menu, then press (Messages), (Msg Setting), (Pix Msg Setting). The options listed in the following. • Quick Text: View and edit any of the pre-composed messages in your Quick Text list. • Save In Outbox: Set the default method for saving (or not saving) messages to your Outbox.
Changing Message Settings 2. Use the navigation key to highlight the default method of text entry, then press . Your settings are saved. Use Callback # to view or modify the callback #. The Callback # can be inserted into all outgoing messages, thereby notifying the recipient(s) of your phone number. Note: This feature is network dependent. GSM networks may not have this service. Also, functionality is dependent upon whether or not Caller ID is enabled on your phone and may not be available in all areas.
Section 8 Auto Delete Use Auto Delete to set the disposal method of messages after they are read. ) Menu, 1. In standby mode, press the left soft key ( then press (Messages), (Msg Setting), (Auto Delete). The options listed in the following table appear in the display. • Auto Delete: If memory is full, the first message received after the memory becomes full is automatically deleted • Not Delete: Do not delete messages after they are read 2. Use the navigation key to highlight the desired option. 3.
Call Options • P Pause: Insert a “hard” pause into the dialing string. The phone waits for input from you before dialing resumes. • T Pause: Inserts a short, 2 second pause into the dialing string. The phone pauses for 2 seconds before dialing resumes. 5. Press . Your changes are saved. Call Options Call Options allows you to select the method for answering incoming calls, setting redial options, setting data rates for data calls, and more.
Section 8 • Send Key • Folder Open • Any Key 3. Use the navigation key to highlight the method you wish to use for answering calls, then press . Auto Answer This feature is active when the supplied headset is plugged into the headset jack. If you wish to have calls answered automatically, use Auto Answer to select the delay time before a call is picked up. 1. In standby mode, press the left soft key ( ) Menu, then press (Settings), (Call Options), (Answer Options).
Call Options then press (Settings), (Auto Retry). (Call Options), • • • • Off After 10 Sec After 30 Sec After 60 Sec 3. Press to select the option, or press to return to the Call Options sub menu without making a selection. Data Note: Only available within Verizon Wireless Enhanced Services Area. Use the Data sub menu to set the baud rate for data calls and when data mode is to be used. Note: The Data feature does not function while the phone is in Int’l (GSM) mode. 1.
Section 8 2. Use the navigation key to highlight Data For Next Call or Data Until Powered Off, then press . Select Data Off or press to return to the Data sub menu without configuring Auto Detect. Select the Baud Rate 1. Select the Data sub menu, and press Rate). (Baud 2. Use the navigation key to highlight Auto, 19200, 38400, 57600, 115200, or 230400, then press . Press if your wish to return to the Data sub menu without selecting the baud rate. Ringer Settings 1.
Resetting Your Phone Resetting Your Phone 1. In standby mode, press the left soft key ( ) Menu, then press (Settings), (Security). You’re prompted to enter the lock code. 2. Enter the lock code, press (Reset Phone). A prompt appears in the display asking if you wish to restore default settings (except for the Phonebook and Voice Dial). 3. Press the left soft key ( press the right soft key ( Security list.
2. Press . The sub menus listed appear in the display. Section 8 • Divert Always: Forward all calls to the specified number. When roaming off the Verizon Wireless Network, availability of this feature varies by service provider and may be limited or restricted in some areas • Busy: Forward calls to the specified number only when busy.
GSM Services 2. Use the navigation key to highlight Call Barring, then press . The sub menus in the following table appear in the display. • All Outgoing: Disable all outgoing calls. • Internatioinal: Disable International calls only. • International Except To Home: Disable International calls, except those calls to your home. • All Incoming: Disable all incoming calls. • In While Abroad: Disable all international calls while out of your home service area. • Cancel All: Cancel all Call Barring.
Section 8 1. In standby mode, press the left soft key ( ) Menu, then press (Settings), (GSM Services). Call Diverting is highlighted. 2. Highlight Call Waiting, then press 3. Highlight Activate, then press . . Select Network (GSM Only) This feature allows you to manually select the GSM carrier. Note: Selecting any option other than Automatic could result in different or higher airtime charges. 1. In standby mode, press the left soft key ( ) Menu, then press (Settings), (GSM Services).
GSM Services 2. Use the navigation key to highlight Caller ID, then press . 3. Use the navigation key to select Default, Hide Number, or Send Number, then press . Closed User Group (CUG) (GSM Only) Note: This feature is not supported at this time. Closed User Groups are a GSM service that specifies who you can call and who can call you. Typical advantages of Closed User Groups are their cost effectiveness and security. You may subscribe to up to 10 Closed User Groups.
Section 8 CUG Activation Note: GSM service is required before you can activate a Closed User Group. 1. In standby mode, press the left soft key ( ) Menu, then press (Settings), (GSM Services), (Closed User Group). The options appear in the display. • Index List: Allows you to enter a Closed User Group, which can then be activated. • Outside Access:Turn Outside Access on or off. Outside access allows you to place calls to people outside of the Closed User Group.
Section 9: Multimedia Topics Covered • Multimedia • Receiving Pictures • Sending Pictures Section 9: Multimedia 145 Section 9 This section allows you send and receive multimedia images that have been downloaded using Get It Now.
Multimedia Media of all types are stored in the Multimedia. You can also view memory info for Multimedia to see how much space you’ve used (and have left) for stored media Section 9 1. In standby mode, press the left soft key ( ) Menu, then press (Multimedia). These sub menus appear in the display. • Image Gallery: Contains Preloaded images (those that • • • • • came with the phone). The My Image folder is used to store those images that you’ve downloaded.
Sending Pix Messages 3. Press the left soft key ( display. ) Options, These sub menus • Mark: mark image • Set Wallpaper: you can select a background image to be displayed on the idle screen • Delete: Deletes the image being displayed. • Delete All: Delete images, sounds, animelodies, or photos from any folder of the media gallery. Sending Pix Messages You can add sounds and attach a V-card or Phonebook entry to your Pix Msg. This is also known as Multimedia Messaging (MMS). 1.
Note: You can send a Pix Msg to up to ten recipients. Separate each recipient’s address or phone number with a space in the Send to field of the Pix Msg composer. 4. Press once you’ve finished entering the number or e-mail address of the recipients in the To, CC, or BCC fields. The Pix Msg composer appears in the display with the Add Message field highlighted. 5. Press the right navigation key to add a message. Section 9 6. Compose your message, then press returned to the Pix Msg composer. . You’re 7.
Receiving Pix Messges 14. Press the right navigation key to display the Subject composer. 15. Enter a subject using the keypad, then press returned to the Pix Msg composer. . You’re 16. Press the down navigation key until Attach is highlighted, then press the right navigation key. A popup menu appears in the display. 17. Press press to insert a name card (if one exists), or to insert an entry from your Phonebook. Section 9 At the Pix Msg composer, press to send the message to the intended recipient(s).
Receive messages while in a call When you receive a message while in a call, the New Message dialog box appears in the display along with the closed envelope icon ( ). You can view the message without disconnecting your call. 1. Press the left soft key ( ) Ignore to ignore the message. The message is saved to your inbox where you can view it later. Section 9 2. Press the right soft key ( ) View to open the message, your call remains connected.
Retrieving a Pix Msg 3. Use the navigation keys to scroll through the message or view the entire picture if necessary. View a Pix Msg later (online) Note: Only available within Verizon Wireless Enhanced Services Area. 1. When you receive a new Pix Msg, press the right soft key ( ) Later. 2. To view the message, press the left soft key ( ) Menu, then press (Messages), (Inbox). Section 9 3. Use the navigation key to highlight the unopened message, then press .
Section 9
Section 10: Organizer Topics Covered • Planner • World Time • Calendar • To Do List • Alarm • Calculator The topics covered in this section allow you to schedule appointments, view the calendar, create To-Do lists, set an alarm, and perform simple math calculations.
Planner Planner is a suite of PIM (Personal Information Management) applications such as a Calendar, To Do List, and Memo Pad. Schedule events, set reminders, create to do lists, perform calculations, and more with the digital assistant functionality of this useful feature. Note: While in GSM mode, your phone’s clock is not updated automatically. If you change time zones, make sure you update your phone’s clock in the Planner menu. 1. In standby mode, press the left soft key ( ) Menu, then press (Planner).
Planner Time/Date (CDMA mode) Use the Time/Date function in CDMA mode to set your phone’s date format. Note: This is primarily a GSM function. Only the date format can be changed in CDMA mode. The time and date can only be changed while in GSM mode. 1. In standby mode, press the left soft key ( ) Menu, then press (Planner), (Time/Date). 2. Use the left/right navigation keys to select the date format. 3. Press to save your settings.
Memo Pad Create and store notes in Memo Pad. You can’t prioritize or set an alert for stored notes. Return to Memo Pad anytime to review and edit your notes. 1. In standby mode, press the left soft key ( ) Menu, then press (Planner), (Memo Pad). 2. If you have any stored memos, they appear as a list in the display. If this is your first time in Memo Pad, you’re prompted to add a new memo. 3. To add a new memo, press the left soft key ( then enter the memo using the keypad. ) New, 4.
World Time display. 2. With a memo highlighted, press the left soft key ( ) Option. A pop-up menu with the options listed in the following table appears in the display • New Memo: Add a new memo to Memo Pad • Edit: Edit the memo currently highlighted or appearing in the display. • Delete: Erase the memo currently highlighted or appearing in the display. • Mark & Delete: Mark and then delete selected memos. This option only appears if you have more than one memo stored. • Delete All: Erase all memo’s 3.
Section 10 • • • • • • • • • • • • • • • • • • • • New York Caracas Brasilia Mid Atlantic Cape Verde London Paris, Berlin Athens, Helsinki Moscow Abu Dhabi Tashkent Alma-ata Bangkok/Jakarta Hong Kong/Beijing Seoul/Tokyo Guam/Sydney Okhotsk Wellington Samoa/Midway Honolulu, Hawaii Setting Daylight Savings Time (DST) If you use the Dual Clock World Time wallpaper for your display, you must set Daylight Savings Time (DST) indicators for your Home and Visiting Areas, as appropriate.
Calendar Setting Home and Visiting Areas DST To enable DST for Home or Visiting areas, follow these steps: 1. In standby mode, press the left soft key ( ) Menu, then press (Planner), (World Time). A world map appears in the display. 2. Use the navigation key to select your home are visiting area, then press the left soft key ( ) Set Dst. A popup menu displays. 3. Use the navigation key to select On, then press Daylight Savings Time is enabled for the area you selected. . 4.
2. Press the left soft key ( ) Option. A pop-up menu appears in the display that contains the menu items . • • • • • • New Event: Schedule a new event. Week View: View the current week. Go To Date: Go to any date that you specify. Go to Today: View today’s events. Del Past Events: Select a past event to delete. Delete All Events: Delete all events in your calendar 3. With New Event highlighted, press . The New Event screen appears in the display with the fields contained below.
Calendar View an event 1. In standby mode, press the left soft key ( ) Menu, then press (Planner), (Calendar). 2. A calendar appears in the display with the current date highlighted. 3. Use the navigation keys to highlight the date containing the event that you wish to view. If the event date is in another month, press the left soft key ( ) Option. Tip: Use the volume key to move between months in the calendar. 4.
14. In Calendar view, press the volume down key to view future months. To-Do List The To Do List allows you to create a task list in which you can store, prioritize, and manage up to 50 To Do List tasks. 1. In standby mode, press the left soft key ( ) Menu, then press (Planner), (To Do List). 2. Press the left soft key ( ) New. 3. Enter details of the task using the keypad. Press the left soft key ( ) Option to display a pop-up menu. 4.
Alarm • Delete All: Erase all To Do task. 4. Use the navigation key to highlight an option, press to perform the function for the highlighted option. Alarm Note: Your clock is not updated automatically while in GSM mode. Make sure to check/change clock settings when traveling abroad. Your phone has an alarm clock that can be set to go off once, or recur daily at a specific time. Once set, the alarm clock is easy to change or turn off. Set An Alarm 2.
6. Use the left/right navigation keys to select AM or PM or 24 Hours. 7. Press the down navigation key once to highlight the Day field. 8. Use the left/right navigation keys to set the frequency (occurrence) of the alarm. Below lists and defines the options for this field. • Once: The alarm sounds only once, at the time specified. • Daily: The alarm sounds every day at the time specified. • Mon-Fri: The alarm sounds Monday through Friday at the time specified.
Alarm Disable an alarm before it sounds 1. In standby mode, press the left soft key ( ) Menu, then press (Planner), (Alarm Clock). The following options appear in the display. • Alarm 01 • Alarm 02 • Alarm 03 • Alarm 04 2. Use the navigation key to highlight the alarm you wish to disable, then press the left soft key ( ) Option. A pop-up menu appears in the display. 3. Press to reset the highlighted alarm or press to reset all alarms. Snooze To use this feature follow these steps: 1.
Calculator You can perform calculations, including addition, subtraction, multiplication and division using your phone. 1. In standby mode, press the left soft key ( ) Menu, then press (Planner), (Calculator). The Calculator appears in the display. 2. Enter the first number in your equation using the keypad. (Numbers can be up to nine digits long.) 3. Press the left soft key ( ) Option to display a pop-up menu which allows you to enter a decimal point or parenthesis. 4. Press negative.
Section 11: Network Services Topics Covered • Call Forwarding • Call Waiting • Network Selection • Caller ID This section allows set up the network functions supported by your carrier. Some of these services may not be available due to coverage area or service plans. If you have any questions, please contact the Customer Support center.
Call Forwarding Call Forwarding allows you to forward all your incoming call to another phone number, even when your phone is turned off. To activat call forwarding, follow these steps: 1. Press . 2. Enter the area code and phone number where the incoming calla are forwarded. 3. Press . A confirmation recording confirms the feature change. Call Waiting If you’re on a call, your phone beeps when another call is incoming. Contact Verizon Wireless for availability of this feature. 1.
Network Selection 3. Dial the second party’s phone number and press 4. When the second party answers, press connect all three parties. . to Network Selection This feature allows you to manually select the GSM carrier. Note: Selecting any option other than Automatic could result in different or higher airtime charges. 1. In standby mode, press the left soft key ( ) Menu, then press (Settings), (GSM Services). Call Diverting is highlighted. 2.
Section 11
Section 12: Get It Now Section 12 Topics Covered • Get It Now Options • Get It Now Settings • Get It Now Help This section explains the Get It Now features where users can download multimedia, applications, games, and check news and sports.
Section 12 Get It Now Options Note: Only available within Verizon Wireless Enhanced Services Area. With Get It Now, you can download full featured applications such as games, personalized ring tones, and pictures. You can also use it to send and receive instant messages, email, or browse the web to catch up on all the latest information. Note: If you receive a call while using Get It Now, the application is put on hold during the call.
Get It Now Settings 3. Use the navigation key to highlight the category of your choice, then press . 4. Select the application you wish to download and follow the online directions. Remove an application You can remove applications to free up space for other applications. 1. In standby mode, press the right navigation key to launch the Get It Now application. Press the right navigation key to highlight the Settings icon. Press the key. 2. Use the navigation key to highlight Manage Apps, then press .
Section 12 2. At the Get It Now menu, use the navigation key to highlight Settings, then press . The options listed in the following table appear in the display • Order Apps: Download applications over the network. • Move Apps: Move previously downloaded applications between the Main Menu, Work, and Fun folders. • Manage Apps: View System Info, Application List, Properties for each application, and other options.
Get It Now Help Buying New Apps What do I pay? When you buy an app you will be charged for the purchase cost of the app and the network connections to download it. Charges will also apply when you use apps that require network connections, such as downloading information and sending text messages. Charges Charges will apply for network connections. A network connection is used when you are browsing the Get it Now Shop, downloading and restoring applications, or canceling subscription applications.
Section 12 presented with a purchase option so you won’t have to look for the app in the Get It Now Shop. Removing Apps You may remove apps that are no longer needed. When you remove an app, you cannot use the application unless you purchase it again. 1. To remove an app, choose Settings, then Manage Apps. 2. Select the app you want to remove. Disabled Apps You can install new apps even if the memory of your phone is full by partially removing (disabling) apps you haven’t used recently.
Section 13: Mobile Web Topics Covered • Lanching Mobile Web • Using Mobile Web • How Mobile Web Keys Work • Links • Place a Call While Using Mobile Web Section 13: Mobile Web 177 Section 13 This section outlines how to launch Mobile Web, how to navigate to other pages on the web, and how the keys on the keypad are used with the web application. Additionally, links to other sites are briefly discussed.
Lanching Mobile Web 1. In standby mode press the left navigation key. See"Section 2: Understanding Your Phone" on page 17 for more on the Navigation Key. 2. Use the navigation key to browse the categories. 3. Once the desired category is highlighted, press enter the category list. to Section 13 Using Mobile Web Note: This feature is currently unavailable outside of theUnited States. Only available within the Verizon Wireless Enhances Services Area.
How Mobile Web Keys Work How Mobile Web Keys Work The following table lists Mobile Web keys and functions Navigation Key: Use the navigation key to browse lists and highlight options. CLR Key: A browser back-up key. Press once to back up one page. Press and hold to go back to home page. Press to clear the last number, letter, or symbol entered. Press and hold to completely clear the display. 0/Next Key: Press to enter a zero (0), or to display another word in the dictionary when in T9 Word entry mode.
SEND Key: Press to dial a highlighted number Links Section 13 Note: This feature is currently unavailable outside of the United States. Only available within the Verizon Wireless Enhances Services Area. Links can serve several purposes, such as jumping to a different page, to a different site, or initiating a phone call. Links are shown inside of brackets ([ ]). Normally, the left soft key ( ) is used to select a highlighted link.
Section 14: VZW with MSN Topics Covered • VZW with MSN • Launching VZW with MSN • Exit VZW with MSN • Navigate the Web • VZW with MSN soft keys • LInks • Place a call while using VZW with MSN This section outlines the available gaming options and accessories for your phone. For more information, contact your service provider.
VZW with MSN Note: This feature is currently unavailable outside of the United States. Only available within the Verizon Wireless Enhances Services Area. VZW with MSN allows you to surf the web from your wireless phone. Each time you launch VZW with MSN, your phone connects to the Internet and the service indicator icon (3G) or (2G) appears in the display. Section 14 Note: If you receive a call while using VZW with MSN, the application is put on hold during the call.
Exit VZW with MSN 3. Once the desired category is highlighted, press enter the category list. to Exit VZW with MSN This feature is currently unavailable outside of the United States. Only available within the Verizon Wireless Enhances Services Area. • Press to exit VZW with MSN. Navigate the Web Note: This feature is currently unavailable outside of the United States. Only available within the Verizon Wireless Enhances Services Area.
At the bottom of the VZW with MSN display contains the browser commands. The left ( ) and right ( ) soft keys on the keypad are used to perform the commands in the display. These are called “soft keys” because their function changes depending where you are in the application. How VZW with MSN keys work The following table lists VZW with MSN keys and functions. Navigation Key: Use the navigation key to browse lists and highlight options. CLR Key: A browser back-up key. Press once to back up one page.
Links END Key: Press to exit VZW with MSN and return the phone to standby mode. Left Soft Key: Press the left soft key to go to the highlighted web link and/or perform the function above it in the display. Right Soft Key: The right soft key is the Menu key. Press this key to display a pop-up menu with several options. SEND Key: Press to dial a highlighted number. Links Note: This feature is currently unavailable outside of the United States.
Section 14
Section 15: Adapters Section 15 Topics Covered • Adapters This section details the use of adapters in respective countries. For more information, contact your service provider. NOTE: THREE INTERNATIONAL POWER PLUG ADAPTERS HAVE BEEN INCLUDED IN THIS BOX FOR YOUR CONVENIENCE. THESE ADAPTERS INCLUDE THE UK POWER PLUG ADAPTER, THE AUSTRALIA POWER PLUG ADAPTER AND THE EUROPEAN POWER PLUG ADAPTER. EACH ADAPTER IS TO BE USED ONLY WITH EACH’S INTENDED COUNTRIES OF USE, AS INDICATED BELOW.
Section 15 Adapters The following list provides the adapter and the countries supported by each Adapter.
Adapters • Ireland • Isle of Man Section 15 • Jordan • Kenya • Kuwait • Lebanon • Macau • Malawi • Malaysia • Maldives • Malta • Mauritius • Myanmar • Nigeria • Oman • Qatar • St. Kitts-Nevis • St. Lucia • St.
• Uganda Section 15 • United Arab Emirates • United Kingdom • Vietnam • Yemen • Zambia • Zimbabwe Australia The Australia Power Plug Adapter can be used in the following countries: • American Samoa • Argentina • Australia • China • El Salvador • Fiji • Guatemala • Kiribati • Nauru • New Zealand • Okinawa • Panama • Papua New Guinea • St.
Adapters • Tajikistan • Tonga Section 15 • Uruguay European The European Power Plug Adapter can be used in the following countries: • Austria • Belgium • Bosnia • Croatia • Cyprus • Denmark • Eastern Europe • Finland • Germany • Greece • India • Italy • Korea • Netherlands • Norway • Poland • Portugal • Russia Section 15: Adapters 191
• Serbia Section 15 • Spain • Sweden • Switzerland • Thailand • Turkey 192
Section 16: Health and Safety Information Topics Covered • Health and Safety Information Section 16: Health and Safety Information Section 16 This section outlines the safety precautions associated with using your phone. These safety precautions should be followed to safely use your phone.
Health and Safety Information Exposure to Radio Frequency (RF) Signals Section 16 Certification Information (SAR) Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the exposure limits for radio frequency (RF) energy set by the Federal Communications Commission (FCC) of the U.S. government.
Health and Safety Information tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output.
this site uses the phone FCC ID number which is usually printed somewhere on the case of the phone. Sometimes it may be necessary to remove the battery pack to find the number. Once you have the FCC ID number for a particular phone, follow the instructions on the website and it should provide values for typical or maximum SAR for a particular phone. Additional product specific SAR information can also be obtained at www.fcc.gov/cgb/sar. Section 16 Consumer Information on Wireless Phones The U.S.
Consumer Information on Wireless Phones base unit connected to the telephone wiring in a house, typically operate at far lower power levels, and thus produce RF exposures well within the FCC's compliance limits. Do wireless phones pose a health hazard? What is FDA's role concerning the safety of wireless phones? Under the law, FDA does not review the safety of radiation-emitting consumer products such as wireless phones before they can be sold, as it does with new drugs or medical devices.
hazardous to the user. In such a case, FDA could require the manufacturers of wireless phones to notify users of the health hazard and to repair, replace or recall the phones so that the hazard no longer exists.
Consumer Information on Wireless Phones (FCC). All phones that are sold in the United States must comply with FCC safety guidelines that limit RF exposure. FCC relies on FDA and other health agencies for safety questions about wireless phones. What are the results of the research done already? The research done thus far has produced conflicting results, and many studies have suffered from flaws in their research methods.
Section 16 with certainty what the results of such studies mean for human health. Three large epidemiology studies have been published since December 2000. Between them, the studies investigated any possible association between the use of wireless phones and primary brain cancer, glioma, meningioma, or acoustic neuroma, tumors of the brain or salivary gland, leukemia, or other cancers. None of the studies demonstrated the existence of any harmful health effects from wireless phones RF exposures.
Consumer Information on Wireless Phones of wireless phones. Many factors affect this measurement, such as the angle at which the phone is held, or which model of phone is used. What is FDA doing to find out more about the possible health effects of wireless phone RF? FDA is working with the U.S.
What steps can I take to reduce my exposure to radio frequency energy from my wireless phone? Section 16 If there is a risk from these products - and at this point we do not know that there is - it is probably very small. But if you are concerned about avoiding even potential risks, you can take a few simple steps to minimize your exposure to radio frequency energy (RF).
Consumer Information on Wireless Phones Some groups sponsored by other national governments have advised that children be discouraged from using wireless phones at all. For example, the government in the United Kingdom distributed leaflets containing such a recommendation in December 2000. They noted that no evidence exists that using a wireless phone causes brain tumors or other ill effects.
Section 16 Do wireless phone accessories that claim to shield the head from RF radiation work? Since there are no known risks from exposure to RF emissions from wireless phones, there is no reason to believe that accessories that claim to shield the head from those emissions reduce risks. Some products that claim to shield the user from RF absorption use special phone cases, while others involve nothing more than a metallic accessory attached to the phone.
Consumer Information on Wireless Phones FDA continues to monitor the use of wireless phones for possible interactions with other medical devices. Should harmful interference be found to occur, FDA will conduct testing to assess the interference and work to resolve the problem. Additional information on the safety of RF exposures from various sources can be obtained from the following organizations: • FCC RF Safety Program: http://www.fcc.
• International Commission on Non-Ionizing Radiation Protection: http://www.icnirp.de • National Radiation Protection Board (UK): http://www.nrpb.org.uk • Updated 4/3/2002: US food and Drug Administration http://www.fda.gov/cellphones Section 16 Road Safety Your wireless phone gives you the powerful ability to communicate by voice, almost anywhere, anytime. But an important responsibility accompanies the benefits of wireless phones, one that every user must uphold.
Road Safety 4. Let the person you are speaking with know you are driving; if necessary, suspend the call in heavy traffic or hazardous weather conditions. Rain, sleet, snow, ice and even heavy traffic can be hazardous. 5. Do not take notes or look up phone numbers while driving. Jotting down a "to do" list or flipping through your address book takes attention away from your primary responsibility, driving safely. 7. Do not engage in stressful or emotional conversations that may be distracting.
10. Call roadside assistance or a special non-emergency wireless assistance number when necessary. If you see a broken-down vehicle posing no serious hazard, a broken traffic signal, a minor traffic accident where no one appears injured, or a vehicle you know to be stolen, call roadside assistance or other special non-emergency number. Section 16 "The wireless industry reminds you to use your phone safely when driving." For more information, please call 1-888-901-SAFE, or visit our web-site www.wow-com.
Using Your Phone Near Other Electronic Devices Using Your Phone Near Other Electronic Devices Most modern electronic equipment is shielded from radio frequency (RF) signals. However, certain electronic equipment may not be shielded against the RF signals from your wireless phone. Consult the manufacturer to discuss alternatives. Pacemakers These recommendations are consistent with the independent research and recommendations of Wireless Technology Research.
Other Medical Devices Section 16 If you use any other personal medical devices, consult the manufacturer of your device to determine if it is adequately shielded from external RF energy. Your physician may be able to assist you in obtaining this information. Switch your phone off in health care facilities when any regulations posted in these areas instruct you to do so. Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy.
Emergency Calls the need to observe restrictions on the use of radio equipment in fuel depots (fuel storage and distribution areas), chemical plants or where blasting operations are in progress. Emergency Calls This phone, like any wireless phone, operates using radio signals, wireless and landline networks as well as user-programmed functions, which cannot guarantee connection in all conditions.
2. Key in the emergency number for your present location (for example, 911 or other official emergency number). Emergency numbers vary by location. 3. Press the key. If certain features are in use (call barring, for example), you may Section 16 first need to deactivate those features before you can make an emergency call. Consult this document and your local cellular service provider. When making an emergency call, remember to give all the necessary information as accurately as possible.
Other Important Safety Information Vehicles using liquefied petroleum gas (such as propane or butane) must comply with the National Fire Protection Standard (NFPA-58). For a copy of this standard, contact the National Fire Protection Association, One Batterymarch Park, Quincy, MA 02269, Attn: Publication Sales Division. Cautions Although your phone is quite sturdy, it is a complex piece of equipment and can be broken. Avoid dropping, hitting, bending or sitting on it.
bag or in the air bag deployment area. If wireless equipment is improperly installed and the air bag inflates, serious injury could result. • Switch your phone off before boarding an aircraft. The use of wireless phone in aircraft is illegal and may be dangerous to the aircraft's operation. • Failure to observe these instructions may lead to the suspension or denial of telephone services to the offender, or legal action, or both.
Availability of Various Features/Ring Tones Understanding How Your Phone Operates Your phone is basically a radio transmitter and receiver. When it's turned on, it receives and transmits radio frequency (RF) signals. When you use your phone, the system handling your call controls the power level. This power can range from 0.006 watts to 0.2 watts in digital mode.
Section 16 available at an additional cost. Other conditions and restrictions may apply. See your service provider for additional information.
Battery Standby and Talk Time Battery Standby and Talk Time Standby and talk times will vary depending on phone usage patterns and conditions. Battery power consumption depends on factors such as network configuration, signal strength, operating temperature, features selected, frequency of calls, and voice, data, and other application usage patterns.
temporarily not work, even when the battery is fully charged. Li-ion batteries are particularly affected by temperatures below 0 °C (32 °F). • Do not short-circuit the battery. Accidental short- circuiting can occur when a metallic object (coin, clip or pen) causes a direct connection between the + and - terminals of the battery (metal strips on the battery), for example when you carry a spare battery in a pocket or bag.
Care and Maintenance inside the phone, which may damage the phone's electronic circuit boards. • Do not drop, knock or shake the phone. Rough handling can break internal circuit boards. • Do not use harsh chemicals, cleaning solvents or strong detergents to clean the phone. Wipe it with a soft cloth slightly dampened in a mild soap-and-water solution. • Do not paint the phone. Paint can clog the device's moving parts and prevent proper operation.
Section 16
Section 17: Warranty Information Topics Covered • Standard Limited Warranty This section allows you send and receive images taken with your phones built in digital camera. There are several options associated with the camera to allow you to capture crisp, clear images.
Standard Limited Warranty What is Covered and For How Long? SAMSUNG TELECOMMUNICATIONS AMERICA, L.P.
Standard Limited Warranty ancillary/peripheral equipment not furnished or approved by SAMSUNG; (e) defects or damage from improper testing, operation, maintenance, installation, or adjustment; (f) installation, maintenance, and service of Product, or (g) Product used or purchased outside the United States or Canada.
warranted for a period of ninety (90) days. All other repaired/replaced Product will be warranted for a period equal to the remainder of the original Limited Warranty on the original Product or for 90 ays, whichever is longer. All replaced parts, components, boards and equipment shall become the property of SAMSUNG. If SAMSUNG determines that any Product is not covered by this Limited Warranty, Purchaser must pay all parts, shipping, and labor charges for the repair or return of such Product.
Standard Limited Warranty EXPRESS WARRANTY OF ANY KIND WHATSOEVER WITH RESPECT TO THE PRODUCT. ALL IMPLIED WARRANTIES AND CONDITIONS THAT MAY ARISE BY OPERATION OF LAW, INCLUDING IF APPLICABLE THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY LIMITED TO THE SAME DURATION OF TIME AS THE EXPRESS WRITTEN WARRANTY STATED HEREIN. SOME STATES/PROVINCES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU.
Section 17 WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY FROM STATE TO STATE/PROVINCE TO PROVINCE. THIS LIMITED WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL PURCHASER OF THIS PRODUCT AND STATES PURCHASER'S EXCLUSIVE REMEDY.
Standard Limited Warranty OF ANY SUCH THIRD-PARTY SOFTWARE OR EQUIPMENT LIE SOLELY WITH THE PURCHASER AND THE DIRECT VENDOR, OWNER OR SUPPLIER OF SUCH THIRD-PARTY SOFTWARE OR EQUIPMENT, AS THE CASE MAY BE. This Limited Warranty allocates risk of Product failure between Purchaser and SAMSUNG, and SAMSUNG's Product pricing reflects this allocation of risk and the limitations of liability contained in this Limited Warranty.
Section 17 Intellectual Property Statement All Intellectual Property, as defined below, owned by or which is otherwise the property of Samsung or its respective suppliers relating to the SAMSUNG Phone, including but not limited to, accessories, parts, or software relating thereto (the "Phone System"), is proprietary to Samsung and protected under federal laws, state laws, and international treaty provisions.
Samsung Telecommunications America (STA), L.P. 109; 5, 099, 204; 5, 101, 501; 5, 103, 459; 5, 107, 225; 5, 109, 390. Printed in South Korea GH68-05891A Rev. 3.0 (12-17-03) Openwave® is a registered Trademark of Openwave, Inc. RSA® is a registered Trademark RSA Security, Inc. Samsung Telecommunications America (STA), L.P. Headquarters: 1301 E. Lookout Drive Richardson, TX 75082 Tel: 972.761.7000 Fax: 972.761.
Section 17
Index Numerics 1X protocol icon 23 2G protocol icon 24 3G protocol icon 23 911, notes about 123 A Adaptation, for digit dial 50 Adapters 187 Add, edit, erase tasks 162 Adding a New Phonebook Entry 78 Airplane mode 39 Alarm clock icon 24 set alarm 163 snooze 165 turn off the alarm 165 Answer options 135 Apps buying 175 cancelling subscription 175 demo 175 disabled 176 expired 176 removing 176 restoring 176 Auto answer 136 Auto answer icon 22 Auto delete 134 Auto hyphen 119 Auto retry 136 B Backlight set
CDMA only features auto retry 136 data sub menu 137 send v-card 99 voice privacy 125 Change lock 122 Closed user group 143 Creating and Sending New Messages 110 Creating and Sending Text message 110 D Data sub menu 137 Delete All 90 Delete memory 126 Dialing one-touch 97 three-touch 97 two-touch 97 Dialogue boxes 25 Digit dial adapt to your voice 51 adaptation 50 reset adaptation 52 tips 49 tips for adapting 51 use 50 Disable alarm 165 Display animation 115 auto hyphen 119 backlight 117 banner 117 langu
style setting 115 Draft messages 106 DST home and visiting area 159 setting 158 DST Icon 24 E Emergency numbers lock mode 124 store 124 Entering Text 69 Changing the Text Entry Mode 70 Entering Numbers 73 Entering Symbols 72 Entering Upper and Lower Case 71 Using T9 Mode 70 Erase voice memos 44 Events, viewing calendar 161 Exit VZW with MSN 183 Expired apps 176 F Finding a Phonebook Entry 88 Finding stored names 93 Folder inbox 104 outbox 105 saved/draft 106 G Get It Now 171 Help 174 Options 172 Get
from another country 31 GSM mode icon 22 GSM only features call barring 140 call diverting 139 call waiting 141 caller ID 142 closed user group 143 edit SIM entries 92 select network 142 H Hard pause 80 Health and Safety Information 193 I Icons battery strength 24 display 22 in use 23 signal strength 22 use icon 23 In Indicator battery strength 24 new message 23 no service 23 roaming 23 signal strength 22 vibrate mode 24 Intalling Your SIMS Card 26 In-use menu 59 IS95-2G protocol 24 L Language settin
Launch VZW with MSN 183 Links 180, 185 Location 129 Lock code, changing 122 Lock phone 121 M Memo pad 156 Memory Information 102 Memos, editing 156 Menu Navigation 57 Menu Outline 60 Menu shortcuts 58 Using 178 Mode airplane 39 call answer 135 entry 132 standby 38 switching 37 text entry 38 TTY 40 vibrate 39 Msg Setting 131 Multimedia 145 Menu, in-use option 59 Message folder inbox 104 outbox 105 saved/draft 106 Message folders 104 Inbox folder 104 Outbox folder 105 Saved/draft folder 106 Message sen
111 Outbox, reviewing messages 105 P Pause dial 81 Personal Organizer 153 Alarm 163 Calculator 166 Calendar 159 To-Do List 162 Phone mode, switching 37 Phonebook find by entry 95 find by group 95 find by name 94 find on SIM 96 p pause & t pause 80 pause dial 81 store pauses 81 v-card 99 Phonebook Groups 82 PIN change 129 check 128 menu 128 Pix messages receiving 150 rejecting 150 Sending Pix Messages 147 settings 132 view later 151 Place a call while using VZW with MSN 185 Planner add a new event 159
memo pad 156 view an event 161 world time 157 Power Adapters 187 Powering off 13 Powering on 12 Profile Settings 119 R Receive messages in call 150 Receive text messages 108 Recent calls call timers 36 delete call logs 36 menu options 35 viewing 34 Remove applications 173 Remove SIM card 26 Removing battery 27 Reset phone 127 Restoring apps 176 Restrict calls 126 Restriction 126 Retrieving New Message 108 Return to last menu 58 Reviewing outbox 105 Ringer off icon 24 Ringer on icon 24 Ringer Settings 1
store new entries to 92 Snooze 165 Speed dial, assigning 98 Speed Dialing 97 1-touch 97 2-touch 97 3-touch 97 Standard Limited Warranty Standard Limited Warranty 222 Standby mode 38 Store emergency numbers 124 Store numbers 91 Store pauses 81 Storing numbers after a call 91 Style setting 115 Subscriptions, cancelling 175 T Tasks, editing 162 Text entry modes 111 Text message settings 131 Text messages, receiving 108 Text messages, sending 111 Time/date CDMA 155 GSM 155 Tips for digit dial 49, 51 Tips
Two-second pause 80 U Understanding Your Phone 17 Battery 27 Display Screen 22 Features of Your Phone 20 Front View of Your Phone 18 Understanding Your Phonebook 75 Adding a New Phonebook Entry 78 Deleting a Phonebook Entry 89 Editing an Existing Phonebook Entry 88 V V-cards, sending 99 Vibrate mode 39 Vibrate mode icon 24 View an event, calendar 161 Voice kit erase memos 44 menu 42 review and erase memos 44 voice setting 45 Voice Kit (CDMA Only) 42 setup 14 Voice memo 43 Voice privacy 125 Voice setti
