User Guide

SAMSUNG Proprietary-Contents may change without notice 5-8
5-5 TEST COMMAND TABLE
Command No. Signal. Name Description
(OP,AB,RB)
01(1F,0,0) T_SUSPEND_I Terminate the normal mode, enter to the test mode.
02(3F,0,0) T_RESTART_I Terminate the test mode, enter to the normal mode.
03(FD,0,0) T_SAVE_VAL_I Save value in EEPROM. (Only for Auto test).
04(1D,0,1) T_GET_MODE_I Get mode CDMA or FM (Only for Auto test).
05(1C,1,0) T_SET_MODE_I Set mode CDMA or FM. (Only for Auto test).
06(1E,0,0) T_WRITE_NV_I Write an EEPROM item (one of the NV items)
07(81,0,0) T_CARRIERON_I Turn the carrier on.
08(82,0,0) T_CARRIEROFF_I Turn the carrier off
09(83,4,0) T_LOADSYN_I
2)
Set the synthesizer to the channel specified by ch_data.
10(84,1,0) T_PWRLEVEL_I
2)
Set the RF power level.
11(85,0,0) T_RXMUTE_I Mute the receive-audio signal.
12(86,0,0) T_RXUNMUTE_I Unmute the receive-audio signal.
13(87,0,0) T_TXMUTE_I Mute the transmit-audio signal.
14(88,0,0) T_TXUNMUTE_I Unmute the transmit-audio signal.
15(89,1,0) T_VOC_ESEC_I Echo canceller ON/OFF
16(8F,0,0) T_ST_ON_I Transmit a continuous Signaling Tone(ST).
17(90,0,0) T_ST_OFF_I Stop transmit a continuous Signaling Tone.
19(93,0,0) T_INDEX_DECR_I Index dn Key.
20(9E,3,0) T_LNA_GAIN_WR_I Write LNA gain.
22(91,96,96) T_SNDNAM_I1) Display and send NAM information.
23(95,3,4) T_SNDVERSION_I
1)
Display and return s/w version .
24(9F,7,8) T_SNDESN_I
1)
Display and return ESN .
25(92,0,0) T_BACKLIGHT_ON_I Turn on the backlight
26(93,0,0) T_BACKLIGHT_OFF_I Turn off the backlight
27(96,0,0) T_LAMP_ON_I Turn on the LAMP
28(97,0,0) T_LAMP_OFF_I Turn off the LAMP
29(9A,5,0) T_REBUILD_I Rebuild EEPROM
30(9D,16,0) T_PLINE_I Display and return production line information.
32(A0,1,0) T_SAT_ON_I*
2)
Enable the transmission of SAT.
33(A1,0,0) T_SAT_OFF_I* Disable the transmission of SAT.
34(A2,0,0) T_CDATA_I Transmit continuous 5-word Reverse CTL CH message.
35(A3,3,0) T_VOLUME_UP_I Increase value of the last command (Only for autotest)
36(A4,3,0) T_VOLUME_DOWN_I Decrease value of the last command (Only for autotest)
38(A6,3,0) T_VOC_ENC_OFFSET_I Vocoder ENC offset.
39(A7,3,0) T_VOC_DEC_OFFSET_I Vocoder DEC offset.