User Guide

4. NAM Programming
NAM features can be programmed as follows:
Notes:
-If you enter the NAM program mode, each item shows the currently stored data. Go to the next item by
pressing OK.
-You can modify the data by entering a new data.
-If you enter a wrong digit, press CLR to delete the last digit. Press and hold CLR to delete all digits.
-To scroll items backwards or forwards, press the VOLUME button on the left side of the phone.
4-1 General Setup
LCD Display Key in Function
47*869#08#9 -selects NAM programming
NAM program 1 -choose ÔGENERALÕ
1:General
2:Setup NAM1
3:Setup NAM2
ESN Volume ▼ -Electronic Serial Number of the phone is displayed
E9031F77
CAI version Volumet -Common Air Interface version is displayed
3
VOC13K/8K
SO_VOICE_08K Volume ▼ -Vocoder Rate
SCM Volume ▼ -Station Class Mark displays the power class,
01101010 transmission, slotted class, dual mode.
Lock Code Lock code, current ststus is displayed
0000 4-digit code -to change, enter new code.
OK -store it
Slot Mode Slot mode. ÔYesÕ indicates the slot mode.
Yes F or E -changes the status.
OK -store it.
Slot Index Slot mode index. The higher, the longer sleeping time
2 0-7 -to change, enter new one.
OK -store it.
Pref NAM(1~4)... Preferred system selection for NAM(1~4).
Digital pref F or E Up to four NAMs are allowed for the phone. This lists
OK one of the four NAMs and allows you to program both
the FM and CDMA settings.
SAMSUNG Proprietary-Contents may change without notice 4-1