I ENGLISH I Digital Video Camcorder SC-D6550 AF Auto Focus CCD LCD Charge Coupled Device Liquid Crystal Display Owner's Instruction Book Before operating the unit, please read this Instruction Book thoroughly, and retain it for future reference.
[ ENGLISH ] Notices and Safety Instructions [_,IllJI i Ill _ I RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER(OR BACK). NO USER SERVICEABLE PARTS INSIDE, REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. TO prevent electric shock, match wide blade of plug to wide slot and fully insert.
[ ENGLISH ] Notices and Safety Instructions VENTILATION: Slots and openings in the cabinet are provided for ventilation to ensure reliable operation of the CAMCORDER and to protect it from overheating. These openings must not be blocked or covered. Never place your CAMCORDER on a bed, sofa, rug, or other similar surface: on or near a radiator or heat register.
[ ENGLISH ] Notices and Safety Instructions 14. LIGHTNING: For added protection of this CAMCORDER during a lightning storm or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the CAMCORDER due to lightning and power-line surges. 15.
[ ENGLISH ] Notices and Safety Instructions 22. To prevent damage which may result in fire or shock hazard, do not expose this appliance to rain or moisture. 23. If this power supply is used at 240V ac, a suitable plug adapter should be used.
[ ENGLISH ] Contents A Features ................................................................................................................................................................................................................................... Accessories Supplied with Camcorder ...................................................................................................................................................................................... Front & Left View ...........
L ENGLISH I Contents Adjusting the LCD Screen .......................................................................................................................................................................................................... Displaying the Date/Time ........................................................................................................................................................................................................... Setting the TV Display .........
[ ENGUSH ] Contents Setting the White Balance ........................................................................................................................................................................................................ Using Quick Menu: White Balance .................................................................................................................................................................................... Setting the Digital Image Stabilizer (DIS) .......
L ENGLISH I Contents Using the Mode Dial ................................................................................................................................................................................................................... Using the Memory Card ............................................................................................................................................................................................................. Memory Card Functions .......
[ ENGLISH ] Contents A MPEG Playback ....................................................................................................................................................................................................................... To Playback a Recorded Moving Image ............................................................................................................................................................................ 106 106 Setting the Focus ..................
L ENGLISH Contents Protecting Stored Images ......................................................................................................................................................................................................... Formatting a Memory Card ......................................................................................................................................................................................................
[ ENGLISH ] Notes and Safety Instructions Please rotate the LCD screen carefully as illustrated. Over rotation may cause damage to the inside of the hinge that connects the LCD screen to the Camcorder. 1. LCD screen closed. ,,I, 2. Standard recording using the LCD screen. • Open the LCD screen with your finger. 3. Recording when looking at the LCD screen from the top. 4. Recording when looking at the LCD screen from the front. 5. Recording when looking at the LCD screen from the left. 6.
L ENGLISH Notes and Safety Instructions Television programs, video tapes, DVD titles, films, and other program materials may be copyrighted. Unauthorized copying of copyrighted material may be against the law. All the trade names and registered trademarks mentioned in this manual or other documentation provided with your Samsung product are trademarks or registeredtrademarks of their respective holders. 1. A sudden rise in atmospheric temperature may cause condensation to form inside the Camcorder.
[ ENGLISH ] Notes and Safety Instructions • • • • Be sure to use a recommended battery pack as described on page 24. The batteries are available at a SAMSUNG retailer. Make sure that the Battery pack is fully charged before starting to record. To preserve battery power, keep your Camcorder turned off when you are not operating it.
I ENGLISH Notes and Safety Instructions Do not film with the camera lens pointing directly at the sun. Direct sunlight can damage the CCD(Charge Coupled Device). 1. Do not position the Camcorder such that the Viewfinder is pointing towards the sun. Direct sunlight can damage the inside of the Viewfinder. Be careful when placing the Camcorder under sunlight or near a window exposed to sunlight. 2. Do not pick up the Camcorder by holding the Viewfinder. 3.
[ ENGLISH ] Notes and Safety Instructions 1. The Lithium battery maintains the clock function and user settings; even if the Battery pack orAC adapter is removed. 2. The Lithium battery for the Camcorder lasts about 6 months under normal operation from time of installation. 3. When the Lithium battery becomes weak or dead, the date/time indicator will display 12:00 AM JAN. 1,2005 when you set the Date/Time to on. When this occurs, replace the Lithium battery with a new one(type CR2025). 4.
L ENGLISH Getting to Know Your Camcorder • • • • • • • • • • • • • • • Multi OSD Language You can select the desired OSD language from OSD List. Digital Data Transfer Function with IEEE1394 By incorporating the IEEE 1394 (i.LINKTM: i.LINK is a serial data transfer protocol and interconnectivity system, used to transmit DV data) high speed data transport port, both moving and still images can be transferred to a PC, making it possible to produce or edit various images.
[ ENGLISH ] Getting to Know Your Camcorder + Make sure that the following basic accessories are supplied with your digital camcorder. Basic Accessories 1. Lithium Ion Battery Pack (AA-E8 TYPE) 2. AC Power Adapter (AA-E8 TYPE) 3. AC Cord 4. 5. Multi-AVCable (Audio/Video/S-Video Cable) Instruction Book 6. 7. Lithium Batteries for Remote Control or Clock. (TYPE: 0R2025) Remote Control 8. USB Cable 9. Software CD 10. Shoulder Strap 11. Lens Cover 12.
I ENGLISH Getting to Know Your Camcorder Fro vie 4. Internal MIC 1. Built-in Flash 5. TFT LCD Screen 2, Camcorder Lens 6. Remote Sensor 3. Camera Lens 1. Built-in Flash (see page 108) 4. Internal MIC 2. Camcorder Lens 5. TFT LCD Screen 3. Camera Lens 6.
[ ENGLISH ] Getting to Know Your Camcorder vie 1. MENU 11.Joystick (Quick View/Flash/ 2, DISPLAY Tele Macro/AE LOCK) 3. EASY.Q 12. Camera Mode Dial 4. Function Buttons 13. Shoulder Strap Hook 5. DELETE 6. MF/AF Button 14. External MIC Jack 7. Quick Menu Selector 15. USB Jack ( 16. AVIS-Video Jack 8. MULTI 17. Jack Cover 9. Speaker 18. DC Jack 10. C.NITE 1. MENU 6. MF/AF Button (see page 110) 2. DISPLAY(see page 25) 7. 3. EASY.
I ENGLISH I Getting to Know Your Camcorder 6. Zoom Lever 1. Focus Adjustment Knob PHOTO Button 2. Viewfinder -- Cassette Door 3. Start]Stop Button 5. Power Switch Hand Strap 4. DV Jack 1. Focus Adjustment Knob (see page 37) 6. Zoom Lever (see page 46) 2. Viewfinder (see page 37) 7. PHOTO Button (see page 67) 3. Start/Stop Button 8. Cassette Door 4. DV Jack 9. Hand Strap 5.
[ ENGLISH ] Getting to Know Your Camcorder 3. TripodReceptacle 4. MemoryCardSlot 5. Battery Release I 1. Lithium Battery Cover 2. Charging Indicator 6. Hand Strap Hook 1. Lithium Battery Cover 5. Battery Release 2. Charging Indicator 6. Hand Strap Hook 3. Tripod Receptacle 7. TAPE EJECT 4. 8. Memory Card Slot 7. TAPE EJECT 8.
I ENGLISH Getting to Know Your Camcorder 18. DISPLAY 1. PHOTO 2. START/STOP 3. SELF TIMER 4. ZERO MEMORY 5. PHOTO SEARCH 6. A.DUB 7. bb (FF) 17. Zoom 16. X2 15. DATE/TIME 14. I_ (SLOW) 8. <4 (REW) 9. I_ (PLAY) 13. II (STILL) 12. • (STOP) 11. F. ADV 10. <11/111'(Direction) 1. PHOTO (see pages 67, 97) 10. <11/111_ (Direction) (see page 72) 2. START/STOP 11. F.ADV (see page 73) 3. SELF TIMER (see pages 45, 103) 12. •(STOP) 4. ZERO MEMORY (see page 44) 13. II (STILL) 5.
[ ENGLISH ] Preparation + It is very important to ensure that the Hand strap has been correctly adjusted before you begin your recording. The Hand strap enables you to: Hold the Camcorder in a stable, comfortable position. Press the ZOOM and Start/Stop button without having to change the position of your hand. Hand Strap 1. Pull and open the Hand Strap Cover and release the Hand Strap. 2. Insert the Hand Strap into the Hand Strap hook. 3.
I ENGLISH Preparation Battery Installationfor the Internal Clock + The Lithium battery maintains the clock function and preset contents of the memory; even if the Battery pack orAC Power adapter is removed. + The Lithium battery for the Camcorder lasts about 6 months under normal operation from the time of installation. + When the Lithium battery becomes weak or dead, the date/time indicator will display 12:00 AM JAN. 1, 2005 when you set the Date/Time to on.
[ ENGLISH ] Preparation + There are two types of power source that can be connected to your Camcorder. The AC Power adapter and AC Cord: used for indoor recording. The Battery pack: used for outdoor recording. To use the AC Power Adapter and DO Cable 1. Connect the AC Power adapter to the AC Cord. 2. Connect the AC Cord to a wall socket. [ Notes ] • You must use an AA-E8 TYPE AC Power adapter. • The plug and wall socket type may differ according to your resident country. 3.
I ENGLISH Preparation + The amount of continuous recording time available depends on The type and capacity of the Battery pack you are using. How often the zoom function is used. It is recommended that you have several batteries available. Charging the Lithium Ion Battery Pack 1. Attach the Battery pack to the Camcorder. 2. Connect the AC Power adapter to an AC Cord and connect the AC Cord to a wall socket. 3. Connect the DC cable to the DC jack on the Camcorder. 4.
[ ENGLISH ] Preparation Table of continuous Recording Time based on Model and Battery Type. + If you close the LCD screen, it switches off and the Viewfinder switches on automatically. + The continuous recording times given in the table below are approximations. Actual recording time depends on usage. Continuous recording time Charging time LCD ON VlEWFINDER ON SB-LS110 Approx. 2hr Approx. lhr 30min Approx. 2hr SB-LS220 Approx. 3hr 30min Approx. 3hr 10min Approx.
I ENGLISH I Preparation Battery Level Display + The battery level display indicates the amount of power remaining in the Battery pack. a. b. c. d. e. Fully charged 20-40% used 40-80% used 80-95% used Completely used (Blinking) (The Camcorder will turn off soon, change the battery as soon as possible) Tips for battery Identification [ Notes ] • Please refer to the Table on page 24 for approximate continuous recording time. • The recording time is affected by temperature and environmental conditions.
[ ENGLISH ] Preparation 1. BatteryLevel (see page 25) 2. ManualFocus(see page 56) 19. TapeCounter 20. Zero Memory(see page 44) 3. 4. 5. 6. EASY.O(see page 42) DIS(see page59) ProgramAE (see page 61) White BalanceMode (see page57) 7. ShutterSpeed (see page55) 21. RecordSpeed Mode 22. OperatingMode 23. Self Timer 8. Exposure(see page 55) 9. DigitalEffectsMode (see page63) 10. Date/Time(see page34) 11. Zoom Position(see page 46) 27. DEW (see page 9) 28. WarningIndicator(see page 147) 29.
I ENGLISH I Preparation 1. BatteryLevel (see page25) 2. CameraMode 3. F (Aperture Range)No. (see page 117) 4. ShutterSpeed (see page 118) 5. Flash Mode(see page 108) 6. SelfTimer 7. ManualFocus(see page 110) 8. Tele Macro (see page 112) 9. MeteringMode (see page 114) 10. CARD(MemoryCard) indicator 11. AE LOCK (see page 113) 12. FocusArea 13. Date/Time(see page90) 14. ExposureCompensation (see page 116) 15. WhiteBalanceMode (see page 119) 16. ISO Sensitivity(see page121) 17. Sharpness (see page 125) 18.
[ ENGLISH ] Preparation + The Joystick is used to make a selection and to move the cursor left, right, up and down. Using the Joystick, you can easily make your selection and navigate the menu. 1. 2. 3. 4. 5. Move to a previous menu item/Adjust the selected item (to the left). Move to a sub menu item/Adjust the selected item (to the right). Move to a lower menu item. Move to an upper menu item. Press to select the chosen item.
I ENGLISH The Camcorder : System Menu Setting! + The Language function works in both REC and PLAY modes. 4, Select the appropriate OSD Language from OSD List. 1. Set the Power switch to REC or PLAY. 2. Press the MENU button. • The menu list will appear. 3. Move the Joystick up or down to select System, then press the Joystick(OK). 4. Move the Joystick up or down to select Language, then press the Joystick(OK). • The available language options are listed. 5.
[ ENGLISH ] The Camcorder : System Menu Setting + Clock setup works in both REC and PLAY modes. + The Date/Time is automatically recorded onto a tape. Before recording, please set the Date/Time. 1. Set the Power switchto REC or PLAY. 2. Press the MENU button. • The menu list will appear. l, on l, on I_Eng(ish 3. Move the Joystick up or down to select System, then press the Joystick(OK). m Dernonslratbl_ _Move 4. Move the Joystick up or down to select Clock Set, then press the Joystick(OK).
I ENGLISH I The Camcorder : System Menu Setting + The Remote function works in both REC and PLAY modes. 4, The Remote option allows you to enable or disable the remote control for use with the Camcorder. 1. Set the Power switch to REC or PLAY. 2. Press the MENU button. • The menu list will appear. 3. Move the Joystick up or down to select System, then press the Joystick(OK). 4. Move the Joystick up or down to select Remote, then press the Joystick(OK). 5.
[ ENGLISH ] The Camcorder : System Menu Setting + The Beep Sound function works in both REC and PLAY modes. •_, You can turn the Beep Sound on or off. When on, each press of a button sounds a beep. 1. Set the Power switchto REC or PLAY. 2. Press the MENU button. • The menu list will appear. 3. Move the Joystick up or down to select System, then press the Joystick(OK). 4. Move the Joystick up or down to select Beep Sound, then press the Joystick(OK). 5.
I ENGLISH The Camcorder : System Menu Setting + Before you begin: Make sure that there is no tape inserted in the Camcorder. (see page 38) + Demonstration automatically shows you the major functions that are included with your Camcorder so that you may use them more easily. + The Demonstration function may only be used in the REC mode without a tape inserted in the Camcorder. ÷ The Demonstration operates repeatedly until the Demonstration mode switched Off. 1. Set the Power switch to REC. 2.
[ ENGLISH ] The Camcorder : Display Menu Setting! + This function works in both REC and PLAY modes. + Your Camcorder is equipped with a 2.5 inch color Liquid Crystal Display(LCD) screen, which enables you to view what you are recording or playing back directly. ÷ Depending on the conditions under which you are using the Camcorder (indoors or outdoors for example), you can adjust; - LCD Bright - LCD Color 1. Set the Power switchto REC or PLAY. 2. Press the MENU button. • The menu list will appear. 3.
I ENGLISH The Camcorder : Display Menu Setting + The Date/Time function works in both REC and PLAY modes. + The date and time are automatically recorded on a special data area of the tape. 1. Set the Power switch to REC or PLAY. 2. Press the MENU button. • The menu list will appear. 3. Move the Joystick up or down to select Display, then press the Joystick(OK). 4. Move the Joystick up or down to select Date/Time, then press the Joystick(OK). 5.
[ ENGLISH ] The Camcorder : Display Menu Setting! + The TV Display function works in both REC and PLAY modes. •;, You can select the output path of the OSD (On Screen Display). - Off: The OSD appears in the LCD screen and Viewfinder only. - On: The OSD appears in the LCD screen, Viewfinder and TV. - Use the DISPLAY button located at the left side of the Camcorder to turn the OSD on/off on the LCD screen/Viewfinder/TV. 1. Set the Power switchto REC or PLAY. 2. Press the MENU button.
I ENGLISH The Camcorder : Basic Recording + The Viewfinder will work when the LCD screen is closed. Adjusting the Focus The focus adjustment knob of the Viewfinder enables individuals with vision problems to see clearer images. 1. Close the LCD screen and pull out the Viewfinder. 2. Use the focus adjustment knob of the Viewfinder to focus the picture. [ Notes ] • Viewing the sun or any strong light source through the Viewfinder for a prolonged period may be harmful, or cause temporary impairment.
[ ENGLISH ] The Camcorder : Basic Recording! + When inserting a tape or closing the cassette compartment, do not apply excessive force, as it may cause a malfunction. + Do not use any tape other than Mini DV cassettes. Connect a power source and slide the TAPE EJECT switch and open the cassette door. • The cassette holder automatically rises and opens forward. 2. Insert a tape into the cassette compartment with the tape window facing outward and the protection tab toward the top.
I ENGLISH The Camcorder : Basic Recording + While recording, it is very important to hold the Camcorder correctly. •=, Fix the lens cover firmly by clipping it to the hand strap. (see page 20) Recording with the LCD Screen 1. Hold the Camcorder firmly using the hand strap. 2. Place your right elbow against your side. 3. Place your left hand under or beside the LCD screen to support and adjust it. Do not touch the built-in microphone. 4.
[ ENGLISH ] The Camcorder : Basic Recording! + In some situations different recording techniques may be required for more dramatic results. 1. General recording. 2. Downward recording. Making a recordingwith a top view of the LCD screen. 3. Upward recording. Making a recordingviewing the LCD screen from below. 4. Self recording. Making a recordingviewing the LCD screen from the front. 5. Recording with the Viewfinder.
I ENGLISH I The Camcorder : Basic Recording 1. Connect a power source to the Camcorder. (see page 22) (A Battery pack or a AC Power adapter) Insert a cassette. (see page 38) 2. Remove the Lens cover. 3. Set the Power switch to REC. • Open the LCD screen. Make sure that STBY is displayed. • If the write protection tab of the cassette is open (set to save), STOP and Protection ! will be displayed. Releasethe write protectiontab to record.
[ ENGLISH ] The Camcorder : Basic Recording + The EASY.Q mode works only in REC mode. + The EASY.Q mode allows a beginner to easily make good recordings. 1, Set the Power switchto REC. 2. By pressing the EAS¥.Q button, all functions on the Camcorder will be set to off and the recording settings will be set to the following basic modes: • Battery level, recording mode, counter, date/time, and DIS (%_)will be displayed. • The word EASY.Q will appear on the LCD screen at the same time.
I ENGLISH The Camcorder : Basic Recording When a Cassetteis loaded and the camcorde[ s left in the STBYmode for morethan 5 minutes Without being used, it will switch off automatically. To use it again, press the Start/Stop button or set the Power switch tOOEF and then back tOREC. This auto power off feature is designed to save battery power. Record Search Youcan view a recording using the Record Search +, - function in STBY mode.
[ ENGLISH ] The Camcorder : Basic Recording! + The Zero Memory function works in both REC and PLAY modes. + You can mark a point on a tape that you want to return to following playback. 1. Set the Power switch to REC or PLAY. Press the ZERO MEMORY button on the remote control before the recording or during playback at the point where you wish to return. • The time code is changed to a tape counter that is set to Zero Memory with the [] 0:00:00 (Zero Memory indicator).
I ENGLISH The Camcorder : Basic Recording + The Self Timer function works only in REC mode. 4, When you use the Self Timer function on the remote control, the recording begins automatically in 10 seconds. 1. Set the Power switch to REC. 2. Press the SELF TIMER button until the appropriate indicator is displayed in the LCD screen. 3. Press the Start/Stop button to start the timer. • Self Timer starts counting down from 10 with a beep sound.
[ ENGLISH ] The Camcorder + 4, + 4, : Basic Recording! The Zoom function works only in REC mode. Zooming is a recording technique that lets you change the size of the subject in a scene. You can zoom using variable zoom speeds. Use these features for different shots. Please note that over-use of the Zoom feature can lead to unprofessional looking results and a reduction of battery usage time. 1. Move the Zoom lever slightly for a gradual zoom, move it further for a high-speed zoom.
I ENGLISH I The Camcorder : Basic Recording + The FADE function works only in REC mode. + You can give your recordinga professional look by using special effects such as fade in at the beginning of a sequence or fade out at the end of a sequence. To Start Recording 1. Set the Power switch to REC. 2. Before recording, hold down the FADE button. • The picture and sound gradually disappear (fade out). 3. Press the Start/Stop button and at the same time release the FADE button.
[ ENGLISH ] The Camcorder : Basic Recording BLC works only in REC mode. Back lighting exists when the subject is darker than the background: - The subject is in front of a window. - The person to be recorded is wearing white or shiny clothes and is placed against a bright background; the person's face is too dark to distinguish his/her features. - The subject is outdoors and the background is overcast. - The light sources are too bright. - The subject is against a snowy background. 1.
I ENGLISH The Camcorder : Basic Recording •:, Color Nite function works only in REC mode. •;, Shutter speed can be controlled, allowing you to record slow moving objects. + Color Nite function may produce a brighter image. 1. Set the Power switch to REC. 2. Press the C.NITE button. 3. Each time you press the C.NITE button, shutter speed is changed to Color N. 1/30, Color N. 1/15 and off. [ Notes ] • The Color Nite will not turn ON or OFF while you are recording.
[ ENGLISH ] The Camcorder : Advanced Recording Setting menu items Available Main Menu Camera Tape Record Display System Sub Menu I Functions REC mode PLAY page Program AE Selecting the Program AE Function Ii 61 White Balance Setting White Balance Ii 57, 58 Digital Effect Setting the Digital special effect Ii 63 DIS Selecting the Digital Image Stabilizing Ii 59, 60 Digital Zoom Selecting Digital Zoom Ii Photo Search Searching pictures recorded in Tape V 67 Audio Select
I ENGLISH I The Camcorder : Advanced Recording Function availability in each Mode _Seleeted Operating Mode _ _ DIS DIS Digital Zoom PHOTO(Tape) Color Nite 16:9Wide Digital Effects Emboss2 Pastel2 Mirror Digital Effects Digital functions Mode Digital Zoom PHOTO (Tape) X _ A X _ X ColorNite X 16:9 Wide Emboss2, Pastel2 Mirror, Mosaic X _ X A X X A X X A A x o A Other Digital Effects x 0 _; 0 X X X X X 0 iii i!!! I iiLi!!! I iiLi!!! i i I i i i i Mosaic Other D
[ ENGLISH ] The Camcorder : Advanced Recording The Record Mode function works in both REC and PLAY (DV IN) modes. This Camcorder records and plays back in SP (standard play) mode and in LP (long play) mode. - SP (standard play): This mode permits 60 minutes of recording time with a DVM60 tape. - LP (long play): This mode permits 90 minutes of recording time with a DVM60 tape. 1. Set the Power switchto REC or PLAY. S ...................................................................................
I ENGLISH I The Camcorder : Advanced Recording! + The Audio Mode function works in both REC and PLAY modes. + This Camcorder records sound in two ways. (12Bit, 16Bit) - 12Bit: You can record two 12Bit stereo sound tracks. The original stereo sound can be recorded onto the Main (Sound1) track. Additional stereo sound can be dubbed onto the Sub (Sound2) track. - 16Bit: You can record one high quality stereo sound using the 16Bit recording mode. Audio dubbing is not possible when using this mode. 1.
[ ENGLISH ] The Camcorder : Advanced Recording + The Wind Cut function works in both REC and PLAY (Audio dubbing) modes. 4. Usethe WindCut function when recordingin windyplaces such as the beachor near buildings. + The Wind Cut function minimizes wind noise or other noise while recording. - When the wind cut is on, some low pitched tones are eliminated along with the sound of the wind. 1. Set the Power switchto REC or PLAY. 2. Press the MENU button. 3.
I ENGLISH I The Camcorder : Advanced Recording! + The Shutter Speed and Exposure function works only in REC mode. 4, Quick menu is used to access Camcorder functions by simply using the Quick menu selector. 1. Set the Power switch to REC. 2. Press the Quick menu selector. • Quick menu list will appear. 3. Move the Quick menu selector up or down to select Shutter or Exposure, then press the Quick menu selector. 4. Move the Quick menu selector up or down to select Manual, then press the Quick menu selector.
[ ENGLISH ] The Camcorder : Advanced _ual Fo_ Recording : ........................................................................................................ + The Auto Focus/Manual Focus function works only in REC mode. 4, In most situations, it is better to use the automatic focus feature, as it enables you to concentrate on the creative side of your recording. + Manual focusing may be necessary under certain conditions that make automatic focusing difficult and/or unreliable.
I ENGLISH The Camcorder : Advanced Recording + The White Balance function works only in REC mode. + The White Balance is a recordingfunction that preserves the unique image color of the object in any recording condition. + You may select the appropriate White Balance mode to obtain good quality image color. • Auto (1_): This mode is generally used to control the White Balance automatically. • Hold (_):This holds the current White Balance value.
[ ENGLISH ] The Camcorder : Advanced Recording Using Quick Menu: White Balance + Quick menu provides easier access to frequently used menus without using the MENU button. 1. Press the Quick menu selector. 2. Move the Quick menu selector up or down to select White Balance, then press the Quick menu selector. 3. Move the Quick menu selector up or down to select desired mode (Auto, Hold, Indoor or Outdoor), then press the Quick menu selector. 4. To exit, press the MENU button.
I ENGLISH I The Camcorder : Advanced Recording + The DiS function works only in REC mode. + DIS (Digital Image Stabilizer) is a function that compensates for any shaking or hand movement while holding the Camcorder (within reasonable limits). ÷ It provides more stable pictures when: - Recording with the zoom (DIS is not available in Digital Zoom mode.) - Recording a small object close-up - Recording and walking at the same time - Recording through the window of a vehicle 1. Set the Power switch to REC. 2.
[ ENGLISH ] The Camcorder : Advanced Recording Using Quick Menu: Digital Image Stabilizer (DIS) + Quick menu provides easier access to frequently used menus without using the MENU button. 1. Press the Quick menu selector. S ............................................................................................ 2. Move the Quick menu selector up or down to select DIS, then press the Quick menu selector. 3.
I ENGLISH I The Camcorder : Advanced Recording + The Program AE function works only in REC mode. 4, The Program AE mode allows you to adjust shutter speeds and apertures to suit different recording conditions. + They give you creative control over the depth of field. Auto mode (1_) - Auto balance between the subject and the background. - To be used in normal conditions. - The shutter speed automatically varies from 1/60 to 1/250 per second, depending on the scene.
[ ENGLISH ] The Camcorder : Advanced Recording Setting the Program AE 1. Set the Power switchto REC. 2. Press the MENU button. • The menu list will appear. 3. Move the Joystick up or down to select Camera, then press the Joystick(OK). Exit J 4. Move the Joystick up or down to select Program AE, then press the Joystick(OK). • The available options are listed. 5. Move the Joystick up or down to select desired program AE option, then press the Joystick(OK). 6. To exit, press the MENU button.
I ENGLISH The Camcorder : Advanced Recording + The Digital Effect function works only in REC mode. + The Digital Effects enable you to give a creative look to your recording. + Select the appropriate Digital Effectfor the type of picture that you wish to record and the effect you wish to create. + There are 11 Digital Effect modes. 1. Art mode This mode gives the images a coarse effect. 2. Mosaic mode This mode gives the images a mosaic effect. 3.
[ ENGLISH ] The Camcorder : Advanced Recording Selecting the Digital Effects 1. Set the Power switchto REC. 2. Press the MENU button. • The menu list will appear. 3. Move the Joystick up or down to select Camera, then press the Joystick(OK). 4. Move the Joystick up or down to select Digital Effect, then press the Joystick(OK). 5. Move the Joystick up or down to select the desired Digital Effect mode, then press the Joystick(OK). • The display mode is set to the selected mode. 6.
I ENGLISH I The Camcorder : Advanced Recording Using Quick Menu: Digital Effects + Quick menu is used to access Camcorder functions by using the Quick menu selector. •t, Quick menu provides easier access to frequently used menus without using the MENU button. 1. Press the Quick menu selector. _l STBY [] 0:00:10 [] 60m4n 2. Move the Quick menu selector up or down to select Digital Effect,then press the Quick menu selector. 3.
[ ENGLISH ] The Camcorder : Advanced Recording + Digital Zoom function works only in REC mode. Selecting the Digital Zoom + Zooming more than 10x is achieved digitally, up to 900x when combined with optical zoom. + The picture quality may deteriorate depending on how much you zoom in on the subject. 1. Set the Power switchto REC. 2. Press the MENU button. • The menu list will appear. 3. Move the Joystick up or down to select Camera, then press the Joystick(OK). 4.
I ENGLISH I The Camcorder : Advanced Recording + Photo image recording works only in REC mode. 1. Set the Power switch to REC. 2. Press the PHOTO button. • The still picture is recorded for about 6-7 seconds. 3. After the PHOTO has been recorded, the Camcorder returns to STBY mode. Searching for a Photo Image + The Photo Search works only in PLAY mode. + Youcan use photo searching by using the PHOTOSEARCHbuttonon the remotecontrol. @ 1. Set the Power switch to PLAY. 2. Press the MENU button.
[ ENGLISH ] The Camcorder : Playback + The Playback function works only in PLAY mode. + You can monitor the playback picture on the LCD screen. 1, Set the Power switchto PLAY. 2. Insert the tape you wish to view. (see page 38) 3. Open the LCD screen. • Adjust the angle of the LCD screen and set the brightness or color if necessary. Press the _1 (REW) button to rewind the tape to the starting point. • To stop rewinding, press the • (STOP) button.
I ENGLISH The Camcorder : Playback + The Speaker works only in PLAY mode. + When you use the LCD screen for playback, you can hear recorded sound from the built-in Speaker. - Take the following steps to lower the volume or mute the sound while playing a tape on the Camcorder. 1. Set the Power switch to PLAY. 2. Press the I•/11(PLAY/STILL)button to play the tape. 3. When you hear sounds once the tape is in play, use the Quick menu selector to adjust the volume.
[ ENGLISH ] The Camcorder : Playback + The Playback function works only in PLAY mode. Playback on the LCD Screen + It is practical to view a tape using the LCD screen when in a car or outdoors. Playback on a TV Monitor + To play back a tape, the television must be NTSC compatible. (see page 146) + We recommend that you use the AC Power adapter as the power source for the Camcorder. Connecting to a TV which has Audio/Video Input Jacks 1. Connect the Camcorder to your TV with the Multi-AV cable.
I ENGLISH I The Camcorder : Playback Connecting to a TV which has no Audio and Video Input Jacks + You can connect your Camcorder to a TV through a VCR. 1. Connect the Camcorder to your VCR with the Multi-AVcable. • The yellow jack: Video • The white jack: Audio(L)- Mono • The red jack: Audio(R) 2. Connect a TV to the VCR. 3. Set the Power switch to PLAY. 4. Turn on both the TV and VCR. • Set the input selector on the VCR to Line. • Select the channel reserved for your VCR on the TV set. 5. Play the tape.
[ ENGLISH ] The Camcorder + + + + : Playback This function works only in PLAY mode. The PLAY,STILL, STOP, FF, REW buttons are located on the Camcorder and the remote control. The RADV (Frame advance), X2, SLOW buttons are located on the remote control only. To prevent tape and head-drum wear, your Camcorder will automatically stop if it is left in still or slow modes for more than 3 minutes. Playback Pause • Press the I_/11(PLAY/STILL) button during playback.
I ENGLISH The Camcorder : Playback Frame Advance (To play back frame by frame) Press the EADV button on the remote control in still mode. - Video sequence advances frame by frame each time you press the EADV button. - The EADV function works in still mode only. To resume normal playback, press the I_/11(PLAY/STILL)button. - Forward frame advance Press the EADV button on the remote control in still mode.
[ ENGLISH ] The Camcorder : Playback + The Audio Dubbing function works only in PLAY Mode. + Youcan not dubsound on a pre-recordedtape in LP or 16 bit mode. 4, Youcan add sound to the original sound on a pre-recorded tape recorded in SP mode with 12bit sound. + Use the internal or an external microphone(not supplied) or other audio equipment. + The original sound will not be erased. Dubbing Sound 1. Set the Power switchto PLAY.
I ENGLISH The Camcorder : Playback 1. Set the Power switch to PLAY. ® 2. Insert the dubbed tape and press the MENU button. 3. Move the Joystick up or down to select Tape, then press the Joystick(OK). 4. Move the Joystick up or down to select Audio Select, then press the Joystick(OK). 5. Move the Joystick up or down to select the audio playback channel, then press the Joystick(OK). • Sound[I]: play the original sound. • Sound[2]: play the dubbed sound. • MIX[l+2]: play back sound1 and 2 equally mixed.
[ ENGLISH ] IEEE 1394 Data Transfer Connecting to a DV Device (DVD Recorder, Camcorder, etc.) • • Connecting to other DV standard products. A standard DV connection is quite simple. If a product has a DV jack, you can transfer data by connecting to the DV jack using the correct cable. NOTE: Please be careM since there are two types of OVjacks, (4pin, 6pin). This Camcorder has a 4pin jack.
I ENGLISH I IEEE 1394 Data Transfer System Requirements • • • • CPU: faster Intel®Pentium Ill TM 450MHz compatible. Operating system: Windows®98SE, ME, XP, Mac OS (9.1-10.2) Main memory: more than 64 MB RAM IEEE1394 add-on card or built in IEEE1394 card Recording with a DV Connection Cable 1. Set the Power switch to PLAY. 2. Connect the DV cable (not supplied) from the DV jack of the Camcorder to the DV jack of the other DV device. • Make sure that I]k" is displayed on the LCD screen. 3.
[ ENGLISH ] USB Interface Transferring a Digital Image through a USB Connection 4. 4, 4, 4, The camcorder supports both USB 1.1 and 2.0 standards. (Depends on the PC specification) You can easily transfer a image from a Memory card to a PC without additional add-on cards via a USB connection. You can transfer a recorded file in memory card to a PC via a USB connection. If you transfer data to a PC, you need to install the software (DV Driver, VideoCodec, DirectX g.0) supplied with the Camcorder.
I ENGLISH USB Interface •_. To play back MPEG moving pictures recorded by the camcorder or streaming data transferred through the USB connection on a PC, the Video Codec program should be installed. ÷ Do not connect the Camcorder to PC before installing the program. + If another Camcorder or scanner is connected, please disconnect it in advance. ÷ DV Media Pro User's Manual is included on the accompanying CD(D:\help\) in Adobe's Portable Document Format(PDF) The user's manual can be viewed using Acrobat Re
[ ENGLISH ] USB Interface Using the PC Camera Function + To use the PC Camera function, the DV Driver, Video Codec and DirectX 9.0. programs must be installed in the PC. + You can use this Camcorder as a PC Camera. This is useful when connecting to a Web site that provides video chatting functions. + When using this camcorder for video conferencing (such as NetMeeting), voice communication may not be supported depending on the video conferencing software.
I ENGLISH I USB Interface Using the USB Streaming Function + + + 1. 2. 3. To use USB streaming,the DV Driver,Video Codec and DirectX9.0. programs must be installed in the PC. You can view Camcorder video on your PC using USB streaming. You can also store it as a moving picture in the "avi" file format, or as a still image in the "jpg" file format on a PC. Set the Power switch to REC or PLAY.
[ ENGLISH ] Digital Still Camera Mode : Preparation + Turn the Mode Dial to select Camera mode by setting the selector as illustrated.
[ ENGLISH I Digital Still Camera Mode : Preparation Inserting a Memory Card 1. Open the Memory Card Cover. 2. Insert the Memory Card into the Slot until it softly clicks. 3. Close the Memory Card Cover. Ejecting a Memory Card 1. Open the Memory Card Cover. 2. Slightly push the Memory Card inwards to pop it out. 3. Pull the Memory Card out of the slot and close the Memory Card Cover. [ Notes ] • Do not apply excessive force when you insert!eject the Memory Card.
[ ENGLISH ] Digital Still Camera Mode : Preparation + The still images that you recorded are saved in a JPEG file format on the Memory Card. 4, The moving images that you recorded are saved in MPEG4 file format on the Memory Card. + Each file has a file number and all files are assigned to a folder. A file number from DCAM0001 is sequentially assigned to each recorded image. Each folder is numbered from 100SSDVC and recorded on the Memory Card.
[ENGLISH Digital Still Camera Mode : Functions + File numbers are given to images in the order they were recorded when they are stored on the Memory Card. + You can reset the numbering back to DCAMO001at any time by setting the FILE to RESET. 1. Set the Power switch to a (CAMERA). 2. Press the MENU button. 3. Move the Joystick to the left or right to select _ • The SETUP menu list will appear. (SETUP). 4. Move the Joystick up or down to select FILE, then move the Joystick to the right.
[ ENGLISH ] Digital Still Camera Mode : Functions + Imago Quality function works in a (Program), M, S, A and SCENE modes. + Set the level of image quality for the still images before you begin. The number of stored images varies depending on the Memory Card capacity, image size and quality. 1. Set the Power switchto a (CAMERA). 2. Set the Mode Dial to a (Program), M, S, A or SCENE. 3. Press the MENU button. 4. Move the Joystick to the left or right to select @ (QUALITY).
[ ENGLISH ] Digital Still Camera Mode : Functions + Image Size function works in Q (Program), il_,(Movie), M, S, A and SCENE modes. + Set the image size for still images before you begin. The number of stored images varies depending on the Memory Card capacity, image size and quality. 1. Set the Power switch to Q (CAMERA) mode. 2. Set the Mode Dial to a (Program), I_ (Movie), M, S, A or SCENE. 3. Press the MENU button. 4. Move the Joystick to the left or right to select _ (SIZE).
[ ENGLISH ] Digital Still Camera Mode : Functions + You can choose a language for the OSD (On-screen Display) menu. •;, Select the appropriate OSD Language from OSD List. 1. Set the Power switchto _, (CAMERA) mode. 2. Press the MENU button. 3. Move the Joystick to the left or right to select _ • The SETUP menu list will appear. (SETUP). 4. Move the Joystick up or down to select LANGUAGE, then move the Joystick to the right. • The available options for LANGUAGE setting are displayed. 5.
[ ENGLISH ] Digital Still Camera Mode : Functions 1. Set the Power switch to a (CAMERA) mode. 2. Press the MENU button. 3. Move the Joystick to the left or right to select _ • The SETUP menu list will appear. (SETUP). 1 ii_ii_ 4. Move the Joystick up or down to select LCD, then move the Joystick to the right. • The available options are listed. DARK - NORMAL- BRIGHT 5. Select an option by moving the Joystick up or down, then press the Joystick(OK) or MENU /_,mf button. • The selected option is applied.
[ ENGLISH ] Digital Still Camera Mode : Functions + A built-in clock for Camera mode creates the Time Stamp. For further information on Time Stamp Imprinting, refer to the next page. 1. Set the Power switchto a (CAMERA) mode. 2. Press the MENU button. 3. Move the Joystick to the left or right to select _ • The SETUP menu list will appear. (SETUP). 4. Move the Joystick up or down to select DATE & TIME, then move the Joystick to the right. • The year will be selected first. 5.
[ENGLISH Digital Still Camera Mode : Functions + IMPRINT allows the user to place a date stamp on a image. Your camera has a built-in clock that maintains the date and time in a 24-hour format. The camera clock needs to be set if you plan to use the date stamp to imprint the date and time on your image. Before you begin! ÷ Set the Clock (refer to the previous page). 1. Set the Power switch to a (CAMERA) mode. 2. Press the MENU button. 3. Move the Joystick to the left or right to select _ (SETUP).
[ ENGLISH ] Digital Still Camera Mode : Functions + Using the Wireless Remote Control, you can easily and remotely manipulate in Camera mode. Refer to page 31 for setting the Wireless Remote Control for Camcorder. + Using the Wireless Remote Control provided, you can take a delayed image using the SELF TIMER button (see page 103). 1. Set the Power switchto a (CAMERA). 2. Press the MENU button. 3. Move the Joystick to the left or right to select _ • The SETUP menu list will appear. (SETUP). 4.
[ ENGLISH ] Digital Still Camera Mode : Functions + You can turn the Beep Sound on or off, when on, each press of a button sounds a beep. 1. Set the Power switch to ,", (CAMERA). 2. Press the MENU button. 3. Move the Joystick to the left or right to select _ (SETUP). • The SETUP menu list will appear. 4. Move the Joystick up or down to select BEEP SOUND, then move the Joystick to the right. • The available options are listed: OFF and ON. 44", 5.
[ ENGLISH ] Digital Still Camera Mode : Functions MainMenu SETUP MYCAM SIZE Sub Menu ' Functions Available Reset the file numbering a [_ FORMAT LCD Set the OSD language Format the Memory Card Adjust the LCD brightness USB DATE&TIME USB data destination (PC/PRINTER) Set the Date and Time IMPRINT WL,REMOTE Set the imprint option (Date/Time) Set the Wireless Remote acceptance BEEP SOUND SHUTTER SOUND Set the beep sound for key press Set the shutter sound Q.
[ ENGLISH ] Digital Still Camera Mode : Functions Main Menu METERING EFFECT SHARPNESS SHOOTING ' Sub Menu MULTI SPOT NORMAL SAVE SCENE Functions B&W SEPIA NEGATIVE Reverses colors SOFT NORMAL Changes sharpness setting VIVID SINGLE OFF 2s SELF Available mode set the metering to MULTI Set the metering to SPOT Ne special effect Converts colors into Black and White Converts color infe.
[ ENGLISH ] Di lital Still Camera Mode : Functions Main Menu FRAME RATE DPOF ' Sub Menu RESIZE Functions 30fps Sets the frame rate of MPEG moving images 15fps STANDARD Standard DPOF printing function INDEX Prints an Index page of all the images stored in the Memory Card.
[ ENGLISH ] Digital Still Camera Mode : Basic Image Taking Taking Still Images + This function works in "' (Program) mode. 1. Insert the Memory Card (see page 83) and connect a power source (see page 22). 2. Set the Power switch to O(CAMERA) and set the Mode Dial to a(Program). 3. Frame your subject. • Frame your subject using the LCD screen or the viewfinder. • Use the Zoom Lever to zoom in or zoom out. 4. Set the focus by pressing the PHOTO button halfway down.
[ ENGLISH ] Digital Still Camera Mode : Basic Image Taking Viewing Still Images + You can play back and view still images stored on the Memory Card. 4, Still images stored on the Memory Card are all displayed at the same size despite their original resolution using the LCD screen or viewfinder.
[ ENGLISH ] Digital Still Camera Mode : Basic Image Taking Viewing a Slide Show 1. Set the Power switch to a (CAMERA). 2. Set the Mode Dial to [_(Play). • The last image taken appears. 3. Press the MENU button. 4. Move the Joystick to the left or right to select _ (SLIDE). • The SLIDE menu will appear. 5. Move the Joystick up or down to select INTERVAL, then move the Joystick to the right. 6. Select the desired interval by moving the Joystick up or down. • The available range is 01 - 10 seconds. 7.
[ ENGLISH ] Digital Still Camera Mode : Basic Image Taking Setting the Q.View Duration + The Q.View function works only for still imagos. + After taking a imago, your Camcorder automatically displays the image for a few seconds (Q.View), then returns to recording mode. You can set the Q.View duration using this menu. 1. Set the Power switchto O (CAMERA). 2. Press the MENU button 3. Move the Joystick to the left or right to select _ (SETUP). • The SETUP menu list will appear. 4.
[ ENGLISH ] Digital Still Camera Mode : Basic Image Taking Viewing Multiple Images in Multiple Image View 1. Insert a Memory Card that has previously stored pictures (see page 83). 2. Set the Power switch to a (CAMERA). 3. Set the Mode Dial to [_(Play). • A stored image is displayed. 4. Press the MULTI ([]) button to display up to 9 pictures. • Multiple pictures are displayed and the cursor is on the image you were viewing. 5. Move the Joystick to the right, left, up or down to select the desired image.
[ ENGLISH ] Digital Still Camera Mode : Basic Image Taking Deleting Image Using DELETE Menu 1. Set the Power switchto O (CAMERA). 2. Set the Mode Dial to [_(Play). • A stored image is displayed. 3. Press the MENU button. 4. Move the Joystick to the left or right to select _ (DELETE). • The available options are listed: SELECT and ALL. Selecting Images to Delete 5. Move the Joystick up or down to select SELECT, then move the Joystick to the right. 6.
[ ENGLISH ] Digital Still Camera Mode : Basic Image Taking + Self Timer function works in " (Program), M, (Movie), M, S, A and SCENE modes. + Using the remote control, delaying the shutter release (in order to take self-photography and various other camera uses) is available. 1. 2. 3. 4. Set the Power switch to O (CAMERA). Set the Mode Dial to a (Program), I_ (Movie), M, S, A or SCENE. Press the MENU button. Move the Joystick to the left or right to select _ (SELF TIMER).
[ ENGLISH ] Digital Still Camera Mode : Basic Image Taking + You can record a moving image using the #, (Movie) mode. Setting the Resolution and Frame Rate 1. Set the Power switchto ,", (CAMERA). 2. Set the Mode Dial to • (Movie). 3. Press the MENU button. + MPEG Resolution 4. Move the Joystick to the left or right to select _ • The available options are listed. 640x480 - 320x240 (SIZE). 5.
[ ENGLISH ] Digital Still Camera Mode : Basic Image Taking Recording a Moving Image onto a Memory Card + You can record a moving image using the m,(Movie) mode. + Before recording a moving image, insert a Memory Card (see page 83). 1. Set the Power switch to a (CAMERA). 2. Set the Mode Dial to • (Movie). • Recordable time using the Memory Card is displayed. 3. Frame your subject, then press the Start/Stop buttonto start recording. • The Time Counter starts counting and the recording begins.
[ ENGLISH ] Digital Still Camera Mode : Basic Image Taking To Playback a Recorded Moving Image 1. Set the Power switchto O (CAMERA). 2. Set the Mode Dial to [](Play). • A stored image is displayed. 3. Move the Joystick to the left or right to locate the moving image to be played back. • The D(Movie) icon will be displayed when a moving image is selected. 4. Press the I,/11(PLAY/STILL) button to start playback. • Playback begins. 5. To pause playback, press the I,./11(PLAY/STILL)button.
[ENGLISH Digital Still Camera Mode : Advanced Techniques + In a (CAMERA) mode, the automatic focus will not engage unless the PHOTO button is pressed halfway down. + To get good image quality, please verify the proper focus before fully pressing the PHOTO button. + While the camera is focusing (when pressing the PHOTO button halfway down), a flashing red icon (O) will appear on the LCD screen. Once the focus is set properly, a green icon (O) will appear. ÷ A beep sound will be heard once the focus is set.
[ ENGLISH ] Digital Still Camera Mode : Advanced Techniques + The Flash works in a (CAMERA) modes and allows the user to take brighter pictures in dark locations (i.e. night time shooting, indoors and in shaded areas). + Auto Flash, Red-Eye Reduction, Fill-in Flash, Slow Sync and Flash Cancel modes are available. ÷ To select a flash mode, move the Joystick up. It will toggle the flash mode between: • Auto Flash ( $" ) The flash automatically pops up and fires according to the lighting conditions.
[ ENGLISH I Digital Still Camera Mode : Advanced Techniques Available Flash Modes by Camera Mode Preset SCENE Mode a Aperture A S. Speed S M EASY.
[ ENGLISH ] Digital Still Camera Mode : Advanced Techniques + Choose a focus mode to suit your subject and composition. Auto focusing, Continuous Auto focusing, Manual focusing, and Macro modes are available. + Focus will be automatically set near the center of the frame. [ Note ] Focus is set when you push the PHOTO button halfway down. Focus is set on the subject located nearest the center of the frame. To provide sharper, clearer images, SPOT metering and MULTI metering function are available.
[ ENGLISH ] Digital Still Camera Mode : Advanced Techniques Continuous Auto Focus Mode ÷ ContinuousAuto Focus function works in a (Program), MySET,M, S, A and SCENE (CHILDREN and CLOSE-UP) modes. •;, The CHILDREN mode enables you to take better pictures when children will not "stay still". + Allows the user to focus rapidly,whereas the single auto focus gives a less rapid response but saves battery power. + When Continuous Auto Focus mode is selected, [CAF] icon is displayed on the LCD screen. 1.
[ ENGLISH ] Digital Still Camera Mode : Advanced Techniques Macro Mode + Macro Mode function works in a (Program), it, (Movie), MySET,M, S, A and SCENE(CLOSE-UP only) modes. 4, The Macro Focusing mode allows the user to take a close-up image of a detailed subject. + Your camera can focus on subjects as close as 4cm (about 1.57 inches). 1. Set the Power switchto O (CAMERA). iiiiiiiiii'i!ii i .......... +,i iill 2. Set the Mode Dial to a (Program), _, (Movie), MySET, M, S orA. 3.
[ ENGLISH ] Digital Still Camera Mode : Advanced Techniques + Exposure, shutter speed and ISO sensitivity affects image brightness and overall image quality. Longer exposure, slower shutter speed and higher ISO sensitivity brighten the image. Adjustment of these settings is available when you are using a (Program),A, S and M camera modes. You can adjust the overall image brightness by adjusting the Exposure, Shutter Speed and ISO settings.
[ ENGLISH ] Digital Still Camera Mode : Advanced Techniques Setting the Auto Exposure Metering Options: SPOT AE or MULTI AE + MULTI and SPOTAE functions work in a (Program), M, S and A modes. + Use this function to adjust the exposure of the subject to obtain better results. + MULTIAE meters the lighting condition of the overall image by metering the exposure on multiple points. + SPOTAE meters the lighting condition of a narrower area in order to have precise exposure control over a specific subject.
[ ENGLISH ] Digital Still Camera Mode : Advanced Techniques SCENE Modes - Preset Auto Exposure Modes + Preset SCENE modes are provided to assist the user in taking pictures under various lighting conditions. + The SCENE modes direct the camera to automatically adjust the aperture, shutter speed and white balance according to the lighting conditions and preset settings.
[ ENGLISH ] Digital Still Camera Mode : Advanced Techniques Manual Exposure Compensation + The Manual Exposure compensation function works in a (Program), S and A modes. 4, If the image in the LCD screen is too bright, choose a negative value for exposure compensation. + If the image in the LCD screen is too dark, choose a positive value for exposure compensation. 1. Set the Power switchto O (CAMERA). 2. Set the Mode Dial to _" (Program), S orA. 3. Press the Quick menu selector. 4.
[ ENGLISH ] Digital Still Camera Mode : Advanced Techniques Setting the Aperture + + + + Aperture function works in M and A modes. By controlling the aperture, the user may adjust the overall image brightness. Large apertures require more lighting and soften the background details. Smaller apertures will increase the depth of field, bringing the main subject and the background into focus. 1. Set the Power switch to "" (CAMERA). 2. Set the Mode Dial to M or A. 3. Press the Quick menu selector. 4.
[ ENGLISH ] Digital Still Camera Mode : Advanced Techniques Setting the Shutter Speed + + + 4, The Shutter Speed function works in M and S modes. By controlling the shutter speed and aperture, you may adjust the overall brightness of the image. Slower shutter speeds require more lighting. Faster shutter speeds require less lighting. For fast moving subjects, a slow shutter setting will produce a motion blurring effect. 1. Set the Power switchto O (CAMERA). 1 " 2. Set the Mode Dial to M or S. 3.
[ENGLISH Digital Still Camera Mode : Advanced Techniques Setting the Preset White Balance + The White Balance function works in a (Program), #, (Movie), M, S and A modes. + Digital Cameras capture an image using a CCD (Charge Coupled Device) that takes in lighting information and detects the color. 4, The color balance may vary depending on the lighting conditions; white balance is used to preserve natural colors under different lighting conditions. 1. Set the Power switch to a (CAMERA) mode. 2.
[ ENGLISH ] Digital Still Camera Mode : Advanced Techniques Setting the Manual White Balance + The white balance function works in a (Program), • (Movie), M, S and A modes. 1. Set the Power switchto O (CAMERA). 2. Set the Mode Dial to e, (Program), #, (Movie), M, S orA. 3. Press the Quick menu selector. • The AWB icon will be displayed. 4. Move the Joystick up or down to select AWB (White Balance). • The White Balance control bar appears while the current setting will be selected in Blue. 5.
[ENGLISH Digital Still Camera Mode : Advanced Techniques + The ISO Sensitivity function works in O (Program), M, S and A modes. + Sensitivity is a measure of how rapidly the camera reacts to a light source. The higher the sensitivity, the brighter the image is under the same exposure condition. + Allowing the flash to fire will help brighten the image. However, if other settings disable the flash use, set the ISO sensitivity to a higher level. 1. Set the Power switch to O (CAMERA). 2.
[ ENGLISH ] Digital Still Camera Mode : Advanced Techniques + The DSE (Digital Special Effects) function works in 0 (Program), I_, (Movie), M, S and A modes. + Digital Special Effects allow the user to create professional looking effects on their images. 1. Set the Power switchto O (CAMERA). 2. Set the Mode Dial to a (Program), i!I, (Movie), M, SorA. 3. Press the MENU button. 4. Move the Joystick to the left or right to select _ • The available options are listed. (EFFECT).
[ENGLISH Digital Still Camera Mode : Advanced Techniques + Auto Exposure Bracketing works only in a (Program) mode. + From time to time, determining the best exposure setting for a image may be difficult and you may not have time to check the results and try again. Auto Exposure Bracketing allows the user to vary exposure compensation settings automatically over a series of photos, bracketing a selected exposure compensation setting.
[ ENGLISH ] Digital Still Camera Mode : Advanced Techniques ÷ Continuous Shot function works in O (Program), M, S and A modes. + Continuous Shot allows the user to take consecutive images of a moving object. + Continuous recording will occur while the PHOTO button is being pressed. • Records images continuously up to the storage capacity. 1. Set the Power switchto O (CAMERA). 2. Set the Mode Dial to a (Program), M, S orA. 3. Press the MENU button. 4.
[ENGLISH Digital Still Camera Mode : Advanced Techniques + The Sharpness function works in a (Program), !!, (Movie), M, S and A modes. + This option allows the user to obtain sharper images by processing the image after it is shot. 1. Set the Power switch to a (CAMERA). 2. Set the Mode Dial to a (Program), !!. (Movie), M, S orA. 3. Press the MENU button. 4. Move the Joystick to the left or right to select _ • The available options are listed. SOFT NORMAL VIVID (SHARPNESS).
[ ENGLISH ] Digital Still Camera Mode : Advanced Techniques + A 3x optical zoom and 12x digital zoom are available. The Zoom indicator shows the current zooming status. A divider indicates the border between optical and digital zooming. The digital zoom digitally processes data from the CCD (Charge Coupled Device, Image Sensor) to enlarge the center portion of the image to fill the frame and may produce a less detailed and slightly grainy image.
[ ENGLISH Digital Still Camera Mode : Advanced Techniques Rota + The Image Rotating function works only in the [)_](Play) mode. + This function works only for still images recorded onto the memory card. + You can rotate a stored image while viewing it. 1. Set the Power switch to a (CAMERA). 2. Set the Mode Dial to [)_](Play). • A stored image is displayed. 3. Move the Joystick to the left or right to locate the image you wish to rotate. 4. Press the MENU button. 5.
[ ENGLISH ] Digital Still Camera Mode : Advanced Techniques ÷ The Image Resizing function works only in the [_(Play) mode. + This function works only for still images recorded onto the memory card. + Only downsizing is available. Enlarging low resolution images into higher resolutions is not available. ÷ Choose this option to scale down your stored images. + This function utilizes JPEG technology. 1. Set the Power switchto a (CAMERA). 2. Set the Mode Dial to [_(Play). • A stored image is displayed. 3.
[ENGLISH Digital Still Camera Mode : Advanced Techniques + MySET menu works only in a (Program), M, S and A modes. + Customize your camera to memorize frequently accessed settings for easier use. MySET allows the user to recall memorized settings to ready the camera in seconds. Memorizing Your Current Settings ÷ You can save up to 3 different settings using MYSET1, MYSET2 and MYSET3. 1. Set the Power switch to a (CAMERA). 2. Set the Mode Dial to a (Program), M, S orA. 3.
[ ENGLISH ] Digital Still Camera Mode : Advanced Techniques Loading Your Customized Settings ÷ After saving your MySET configurations as instructed in the previous page, follow these steps to recall your MySET configuration at a later time. 1. Set the Power switchto a (CAMERA). 2. Set the Mode Dial to MySET. i¸¸¸¸¸¸¸¸¸¸¸¸¸¸111¸!?¸¸ ........_iiili 3. Press the MENU button. 4. Move the Joystick to the left or right to select _ • The available options are listed. MYSET1 - MYSET2 - MYSET3 (LOAD). 5.
[ ENGLISH ] Digital Still Camera Mode : Advanced Techniques ÷ This function changes the starting image that is displayed when the camera is turned on. ÷ You can select and resize a still image to appear as your new start-up image. 1. Set the Power switch to a (CAMERA). 2. Press the MENU button. 3. Move the Joystick to the left or right to select _ (MYCAM). 4. Move the Joystick up or down to select START IMAGE 3, then press the Joystick(OK). • The selected option is applied.
[ ENGLISH ] Digital Still Camera Mode : Advanced Techniques ÷ This function allows the user to have a more detailed view of the image using the LCD screen. + Enlarge a portion of the image to see more detail and move the zoom tool around the image. Zooming the Image 1. Set the Power switchto O (CAMERA). f 2. Set the Mode Dial to [_(Play). | • A stored image is displayed. | 3. Select a image by moving the Joystick to the left or right. | • The selected image is displayed. | 4.
[ ENGLISH ] Digital Still Camera Mode : Advanced Techniques ÷ The Protection function works only in [_(Play) mode. + Selecting Protect from the MENU saves valuable images from accidental deletion. + You may set a image to LOCK to protect it, or UNLOCK to cancel the protection. 1. Set the Power switch to _ (CAMERA). 2. Set the Mode Dial to D_(Play). • A stored image is displayed. 3. Press the MENU button. 4. Move the Joystick to the left or right to select _ (PROTECT). • The available options are listed.
[ ENGLISH ] Digital Still Camera Mode : Advanced Techniques To Select Images to be Protected ÷ Select SELECT. 1. Move the Joystick up or down to select SELECT, then press the Joystick(OK). • The multiple images screen appears. 2. To move the cursor, move the Joystick up, down, left or right, then press the MENU button to lock the selected image. • The protection (0.-,) icon will be displayed on the image. 3. To cancel the protection and unlock the image, press the MENU button again on a selected image.
[ ENGLISH ] Using the Camera - Advanced Techniques ÷ You can use the Format function to completely delete all still images/moving images and options on the Memory Card, including protected still images/moving images. ÷ The format function restores the Memory Card to its initial state. ÷ The Memory Stick supplied with this Camcorder has been formatted already. 1. Set the Power switch to a(CAMERA). 2. Press the MENU button. 3.
[ ENGLISH ] Digital Still Camera Mode : Advanced Techniques + By connecting the Camcorder to printers with PictBridge support (sold separately), you can send images from the memory card directly to the printer with a few simple operations using the Camcorder buttons. ÷ With the PictBridge Support, you can control the printer directly through your Camcorder in order to print out stored images.
[ ENGLISH ] Digital Still Camera Mode : Advanced Techniques Selecting Images + To select images, select SELECT. 1. In the PictBridge settings menu, move the Joystick up or down to select SELECT. 2. Move the Joystick to the right. • The available options are listed: ONE PIC and ALL PICs. 3. Select the desired option moving the Joystick up or down, then press the Joystick(OK). • If ONE PIC is selected, number of prints setting menu is displayed on top of the current image.
[ ENGLISH ] Digital Still Camera Mode : Advanced Techniques Customizing Print Options + To customize your print options such as PAPER SIZE, LAYOUT,PAPER TYPE, PRINT QUALITY, DATE PRINT,and FILE NAME imprint options, select the PRINTER SETUP menu. 1. In the PictBridge settings menu, move the Joystick up or down to select PRINTER SETUP. _i_ • The available options are listed: DEFAULTand CUSTOMIZE. • To change options, select CUSTOMIZE. To reset your settings back to default, select DEFAULT. 2.
[ENGLISH Digital Still Camera Mode : Advanced Techniques Printing Images + After selecting images and the PRINTER SETUP settings, print your images by choosing the PRINT menu. 1. In the PictBridge settings menu, move the Joystick up or down to select PRINT. • The available options are listed: STANDARD and INDEX. 2. Move the Joystick to the right. 3. Select the desired option moving the Joystick up or down, then press the Joystick(OK). • If STANDARD is selected, standard image printing will start.
[ ENGLISH ] Digital Still Camera Mode : Advanced Techniques Printing Images Using DPOF (Digital Print Order Format) Settings + DPOF PRINT requires at least one DPOF marked image on the memory card. 1. Set the DPOF settings as described in page 141. 2. Connect your Camcorder and the printer as described in page 136. • The PictBridge settings menu is displayed. 3. Move the Joystick up or down to select DPOF PRINT, then move the Joystick to the right. • The available options are listed: YES and NO. 4.
[ENGLISH Digital Still Camera Mode : Advanced Techniques + DPOF menu only works in [_(Play) mode. + Mark your images with DPOF (Digital Print Order Format) marking to utilize automatic printing. + You can mark your images with DPOF in 3 ways: STANDARD,INDEX and PRINT SIZE. Before you begin! + Set the Power switch to a (CAMERA). + Set the Mode Dial to [_(Play). Standard DPOF Setup 1. Press the MENU button, then select @ (DPOF) by moving the Joystick to the left or right. • The DPOF menu list will appear.
[ ENGLISH ] Digital Still Camera Mode : Advanced Techniques Index DPOF Setup 1. Press the MENU button, then select _ (DPOF) by moving the Joystick to the left or right. • The DPOF menu list will appear. 2. Move the Joystick up or down to select INDEX, then move the Joystick to the right. • The available options of NO and YES are displayed. 3. Select the desired option by moving the Joystick up or down, then press the Joystick(OK).
[ENGLISH Digital Still Camera Mode : Advanced Techniques • • If ALL PICs is selected, print size setting menu is displayed. Move the Joystick up or down to set the print size. To cancel your selection made, select CANCEL, then move the Joystick to the right. The available options of STANDARD, INDEX, and PRINT SIZE are available. Select PRINT SIZE, then press the Joystick(OK) to cancel your selection. 5. Press the Joystick(OK) to set your choice and exit the multiple images screen.
[ ENGLISH ] Maintenance + For prolonged use of your device, read following instructions carefully. After Using Your Camcorder For the safekeeping of your device, follow these steps. Remove the cassette (see page 38). Turn your camcorder off. Remove the Battery. Remove the Memory Card (see page 83) • To prevent any damage to the LCD screen, do not apply excessive force on its moving parts. • Do not drop or in anyway shock the device.
[ ENGLISH ] Maintenance Cleaning the Camera Body and Video Heads To Clean the Exterior of Your Device To clean the exterior, use a soft dry cloth. Wipe the body gently. Do not apply excessive force when cleaning, gently rub the surface. The LCD screen surface should not be pressed. Use a soft dry cloth to clean the surface. To clean the lens, use an optional air blower to blow out dirt and other small objects. Do not wipe the lens with cloths or your fingers. If necessary, use lens cleaning paper.
[ ENGLISH ] Maintenance + Each country or region has its own electric and color systems. + Before using your camcorder abroad, check the following items: Power Sources You can use your camcorder in any country or area with the supplied AC Power Adapter where the power input range is 100V 240V, 50/60Hz. Use a commercially available AC plug adapter if necessary, depending on the design of the local wall outlets. Color System You can view your recordings using the built-in LCD screen and viewfinder.
[ ENGLISH ] Troubleshooting + If your device fails to function as expected, please check the following before contacting numbers listed for further details. service personnel.
[ ENGLISH ] Troubleshooting ÷ If these instructions do not solve your problem, contact your nearest Samsung dealer or authorized service center/personnel. 1 No power is supplied LCD screen is blank DATE/TIME is wrong Cannot Record a video PO_ The power is not connected properly Connect the AC adapter properly, page 22 The battery is dead The battery is too cold Viewfinder is on.
[ ENGLISH ] Troubleshooting ,iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii _, Images on the LCD screen appear dark Ambient light is too bright Ambient temperature is toe low Adjust the brightness and angle of LCD Low temperatures might produce a dark LCD display, This is not a malfunction. Rear of the LCD screen is hot Prolonged use of LCD screen Close the LCD screen to turn if off, or turn your device off to cool down.
[ ENGLISH ] Specifications Camcorder System Video Signal Video Recording System Audio Recording System Usable Cassette Tape Speed Tape Recording Time FF/REW time General Format Dimension (WxHxD) Weight (Net) Power Consumption Power Source Power Source Type Built-in Microphone LCD screen Size Pixel NTSC 2 Rotary heads, Helical Scanning System Rotary heads, PCM system Digital Video tape: 0.25 inch (6.35mm) MiniDV cassette SP: approx. 0.74 inch/s(18.81mm/s), LP: approx. 0.5 inch/s(12.
[ ENGLISH ] Specifications Optical Zoom Ratio Digital Zoom Ratio Focal Length (f) F. No (Wide / Tele) 10x 900x 2.4 ~ 24mm 1.8/2.4 3x Zooming Speed Filter Diameter Macro CCD Size Variable 4 step 25 Wide Macro CAMCORDER 1 step Not Available Image Stabilizer Auto Focus / Manual Focus 1/6" Charge Coupled Device 680K / 340K NO DIS YES / YES 1/2.5" Charge Coupled Device 5.25M/5.
[ ENGUSH ] Index -A - image size ................................................................................................... Audio dubbing ............................................................................................ Audio Mode.. ................................................................................................ 74 53 --BBLC ............................................................................................................. LCD ...........................
[ ENGUSH I Index Speaker ....................................................................................................... SPOT-AE ................................................................................................... Troubleshooting ....................................................................................... 69 114 .147 TV Display .................................................................................................. 36 -U- USB ............................
[ ENGLISH ] Warranty (SEA users only) SAMSUNG LIMITED WARRANTY SAMSUNG Electronics America Inc. (SEA), warrants that this product is free from defective material and workmanship. SEA further warrants that if product fails to operate properly within the specified warranty period and the failure is due to improper workmanship or defective material, SEA will repair or replace the product at its option. All warranty repairs must be performed by a SEA authorized service center.
[ ENGLISH ] Memo
[ ENGLISH ] THIS CAMCORDER IS MANUFACTURED BY: SERVICE DIVISION 400 Valley Road, Suite 201, Mt. Arlington N.J. 07856 Tel: 1-800-SAMSUNG (1-800-726-7864) *Samsung Electronics' Internet Home Page http://www.samsu ng.
