[ENGLISH Digital Video Camcorder M,n,[_T_%_,SCD23/D24 AF CCD Auto Focus LCD Liquid Crystal Display Charge Coupled Device Owner's Instruction Book Before operating the unit, please read this instruction book thoroughly, and retain it for future reference, I US PATENT 4415844 I I
[ ENGLISH Notices and Safety Instructions RISK OF ELECTRIC SHOCK DO NOT OPEN /|\ dangerous voltage within the product's enclosure that may be of This symbol is intended to alert the user to the presence of uninsulated sufficient magnitude to constitute a risk of fire or electric shock. ._ CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER(OR BACK) NO USER SERVICEABLE PARTS INSIDE, REFER SERVICING TO QUAUFtED SERVICE PERSONNEL _.
[ENGLISH] Notices and Safety Instructions 9. VENTILATION: Slots and openings in the cabinet are provided for ventilation to ensure reliable operation of the CAMCORDER and to protect it from overheating. These openings must not be blocked or covered. Never place your CAMCORDER on a bed, sofa, rug, or other simitar surface: on or near a radiator or heat register.
I ENGLISH Notices and Safety Instructions 14. LIGHTNING: For added protection of this CAMCORDER during a lightning storm o when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will preventdamage to the CAMCORDER due to lightning and power-linesurges. 15.
[ENGLISH Notices and Safety Instructions 22, To prevent damage which may result in fire or shock hazard, do not expose this appliance to rain or moisture. 23, If this powersupply is used at 240V ac, a suitable plug adapter should be use.
I ENGLISH Contents Features .....................................................................................................................................................................................................................11 Accessories Supplied with camcorder .......................................................................................................................................................................12 Basic Accessories ..........................................
[ENGLISH 1 Contents Playing back a tape you have recorded on the LCD .................................................................................................................................................33 Adjusting the LCD during PLAY ...........................................................................................................................................................................34 Controlling Sound from the Speaker .......................................................
I ENGLISH Contents Searching for a PHOTO picture ...........................................................................................................................................................................63 NITE PIX (0 Nx recording)........................................................................................................................................................................................... 64 POWER NITE PIX..........................................................
[ENGLISH 1 Contents Structure of folders and fi_eson the Memory Stick ..............................................................................................................................................82 Image Format .......................................................................................................................................................................................................82 Selecting the CAMCORDER mode ....................................................
I ENGLISH Notes and Safety Instructions Please rotate the LCD screen carefully as illustrated. Over rotation may cause damage to the inside of the hinge that connects the LCD screen to the Camcorder. 1, LCD screen closed, 1 2, Standard recording using the LCD screen. 2 3, Recording when looking at the LCD screen from the top. A 4, Recording when looking at the LCD screen from the front. 4 5, Recording with the LCD screen closed.
[ENGLISH I Notes and Safety Instructions Television programs, video tapes, DVD titles, films, and other program materials may be copyrighted, Unauthorized copying of copyrighted material may be against the law. 1. A sudden rise in atmospheric temperature may cause condensation to form insidethe camcorder. for examlDle: - When you movethe camcorder from a cold location to a warm location (e.g. from outside to inside during winter.) - When you movethe camcorder from a cool location to a hot location (e.g.
[ ENGLISH Notes and Safety Instructions - - Make sure that the battery pack is fully charged before starting to record. To preserve battery power, keep your camcorder turned off when you are not operating it. If your camcerder is in CAMERA mede, and it is left in STBY mode without being operated for more than 5 minutes with a tape installed, it will automatically turn itself off to protect against unnecessary battery discharge. Make sure that the battery pack is fitted firmly into place.
[ENGLISH I Notes and Safety Instructions - Do not film with the camera lens pointing directly at the sun. Direct sunlight can damage the CCD(Charge Coupled Device). 1, Do not position the camcorder such that the viewfinder is pointing towards the sun, Direct sunlight can damage the inside of the viewfinder.Be careful when placing the camcorder under sunlight or near a window exposed to sunlight. 2, Do not pick up the camcorder from the viewfinder. 3, OveFrotating of the viewfinder may damage it, 1.
[ ENGLISH ] Notes and Safety Instructions 1. The lithium battery maintains the clock function and user settings; even if the battery pack or AC adapter is removed. 2. The lithium battery for the camcorder lasts about 6 months under normal operation from time of installation. 3. When the lithium battery becomes weak or dead, the date/time indicator will flash for about five seconds when you set the power switch to CAMERA. in this case, replace the lithium battery with a new one(type CR2025 ). 4.
[ENGLISH] Getting to Know Your Camcorder • Digital data transfer function with IEEE1394 By incorporating the IEEE 1394 (i.LINKTM: LLINKis a serial data transfer protocol and interconnectivifysystem, used to transmit DV data) high speed data transport port, both moving and still images can be transferred to a PC, making it possible to produceor edit various images. • USB interface for digital image data transfer You can transfer still images to a PC using the USB interface without an add-on card.
ENGLISH] Getting to Know Your Camcorder Make sure that the following basic accessories are supplied with your digital video camera, 1. Lithium Ion Battery pack (AD43-00070A) 2. AC Power Adapter (AD44-00065A) 1. Lithium Ion Battery pack 3. AC cord (AD39-00076A) %.-. 2. AC Power Adapter 3. AC Cord 4. AUDIONIDEO cable 5. Instruction Book 4. AUDIONIDEO cable (AD39-00001A) 5. Instruction Book (AD68-OO616B) 6. Lithium battery (AD43-10130H) 7. Shoulder strap 8. USB cable (AD39-00073A) 9.
[ENGLISH Getting to Know Your Camcorder -- I. Internal MIC 5. Viewfinder 6. EASY button -- 7. TFT LCD monitor 3.Video Light 4. Remote sensor 8. IR Light 1. Internal MIC 5. Viewfinder (see page 32) 2. Lens 6. EASY button (see page 57) 3. Video Light 7. TFT LCD monitor 4. Remote sensor 8.
I ENGLISH Getting to Know Your Camcorder 1. Function buttons 11. MENU button 10. Speaker 9. MENU dial 5. Mode_ 8. ENTER button 7. DC jack 6. DVjack 1. Function buttons 2. PB zoom PLAYER 3. Display CAMERA 4. V. light 5. Mode switch (TAPE/MEMORY STICK) EASY _1 : (REW) REC SEARCH - : (FF) REC SEARCH + I_/11: (PLAY/STILL) FADE • BLC : (STOP) !ij_i;i¸iil¸i!i¸II ¸;i_; i!i̧!!i:ii:i_ ¸il;:!!!iii_iil; !!i :iii!iiiii;;iiii_ iif!! ¸;!i! :iii!iiiii!;iiii_ iif!! ¸;!i! :iii 6. DV jack 7.
[ENGLISH Getting to Know Your Camcorder 11. SLOW SHUTTER -- 10. NITE PIX switch 1. Zoom lever 2. PHOTO button -- LJSBjack jack =udio/Video jack 3. START/STOP button -5. Hook for handstrap 4. Power switch -- 1. Zoom lever 9. USB jack 2. PHOTO button (see page 63) 10, NITE PIX switch 3. START/STOP button 11, SLOW SHUTTER 4. Power switch (CAMERA or PLAYER) 5. Hook for handstrap 6. External MIC in 7. AudioNideo jack 8.
I ENGLISH Getting to Know Your Camcorder 1. Charging indicator 8. Memory Stick slot 7.Tripod receptacle 2. B_tery Release 3. Lithium battery cover 6. Focus adjust knob 4. Hook for shoulder strap A 5.TAPE OPEN / EJECT 1. Charging indicator 5, TAPE OPEN / EJECT 2. Battery Release 6, Focus adjust knob 3. Lithium battery cover 7, Tripod receptacle 4.
[ENGLISH I Getting to Know Your Camcorder 18. DISPLAY 1.PHOTO 2. START/STOP 3. SELFTIMER 4. ZEROMEMORY 5. PHOTOSEARCH 6.A=DUB 7.HI, (FF) 16.X2 15. DATE/TIME 8.44 (REW) 14.It (SLOW) 9. Ib_(PLAY) 13.II 10. Direction 12. ==(STOP) 11. F.ADV 1. PHOTO 2. START/STOP 3. SELF TIMER (see page 20) 4. ZERO MEMORY (see page 72) 5. PHOTO Search 6. 7. 8. 9. 17. Zoom A.DUB (see page 61) b_' (FF) 44 (REW) I_ (PLAY) (STILL) 10. Direction (411, I1_') 11. F. ADV (see page 71) 12. • (STOP) 13. II (STILL) 14.
I ENGLISH Getting to Know Your Camcorder 1. 2. 3. 4. 5. 6. 7. 8. g. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21.
[ENGLISH] Getting to Know Your Camcorder A. Folder number-file number (see page 82) B. Image counter - Current still image/Totalnumber of recordable still images. C. CARD (MEMORY STICK) indicator D. Image recording and loading indicator E. Quality F. ERASE PROTECTION indicator (see page 89) G. Print Mark (see page 88) H. SLIDE SHOW • Turning OSD on/off Press the DISPLAY button on the left side panel. - Each press of the button toggles the OSD function on and off.
I ENGLISH ] Preparation ÷ You need to insertor replace the lithium battery when : - You purchase the camcorder. - The remote control doesn't work. ÷ Ensure that you insert the lithium cell correctly,following the + and - markings. ÷ Be careful not to reverse the polarity of the battery. When you use the Self Timer function on the remote control, the recording begins automatically in 10 seconds. 1. Set the camcorder to CAMERA mode. 2.
[ENGLISH] Preparation •l, The lithium battery maintains the clock function and preset contents of the memory; even if the battery pack or AC power adapter is removed. •l, The lithium battery for the camcorder lasts about 6 months under normal operation from the time of installation. •l, When the lithium battery becomes weak or dead, the date/time indicator flashes for about 5 seconds when you set the power switch to CAMERA. When this occurs, replace the lithium battery with CR2025 type. 1.
[ ENGLISH ] Preparation It is very important to ensure that the Hand strap has been correctly adjusted before you begin your recording. The hand strap enables you to : - Hold the camcorder in a stable, comfortable position. - Press the Zoom and START/STOPbutton without having to change the position of your hand. a, Pull open the Hand Strap cover and releasethe Hand Strap. b. Adjust its length and stick it back onto the Hand Strap cover, c.
[ENGLISH Preparation There are two types of power source that can be connected to your camcorder. - The AC PowerAdapter and AC cord : used for indoor recording. - The Battery Pack : used for outdoor recording, 1. Connect the AC Power adapter to the AC cord. 2. Connect the AC cord to a wall socket. The plug and wall socket type may differ according to your resident country. 3. Connect the DO cable to the DC jack socket of the camcorder. 4.
[ ENGLISH ] Preparation ÷ The amount of continuous recording time available depends on : - The type and capacity of the battery pack you are using. - How often the Zoom function is used. It is recommended that you have several batteries available. ( 1. Attach the battery packto the camcorder. 2. Connect the AC Power adapter to an AC cord and connect the AC cord to a wall socket. 3. Connect the DC cable to the DC jack socket on the camcorder. 4.
[ENGLISH Preparation 4, If you close the LCD screen, it switches offand the viewfinder switches on automatically. 4, The continuous recording times given in the table above are approximations. Actual recording time depends on usage. Time • • • • • • Continuous recording time Charging time LCD ON EVF ON SB-L110 Approx. 2hr Approx. lhr 30rain Approx. 2hr SB-L220 Approx. 3hr 30min Approx. 3hr 1groin Approx.
[ ENGLISH ] Preparation • The battery level display indicates the amount of power remaining in the battery pack. a, Fully charged b, 20~40% used c, 40~80% used /;_ _¢_ a _ b c d, 80~95% used e, Completely used (nickers) (The camcorder will turn off soon, change the battery as soon as possible) 4, Please refer to the table on page 25 for approximate continuous recording times. 4, The recording time is affected by environmental temperature and conditions.
[ENGLISH] Preparation When inserting a tape or closing a cassette holder,do not apply excessive force. This may cause a malfunction. Do not use any tapes other than Mini DV cassettes. 1. Connect a powersource and slide the TAPE OPEN/EJECT switch and open the cassette door. - The cassette holding mechanism rises automatically. 2. Insert a tape intothe cassette holderwith the tape window facing outward and the protection tab toward the top. 3.
[ ENGLISH ] Basic Recordin l 1. Connect a Power source to the camcorder. (see page 23) (A battery pack or a AC power adapter) • Insert a cassette. (see page 27) 2. Remove the LENS CAP and hook it onto the hand strap. 3. Set the power switch to the CAMERA position. • Open the LCD monitor. • Set the mode switch to the TAPE position. Make sure that STBY is displayed. • If the protection tab of the cassette is open, STOP and PROTECTION! will be displayed.
[ENGLISH Basic Recordin l €- You can view a recording using the REC SEARCH +, - function in STBY mode. REC SEARCH - enables you to play the recording backwards and REC SEARCH + enables you to play it forwards, for as long as you keep each button presseddown. €- If you pressthe REC SEARCH - button in STBY mode, your camcorder will play in reverse for 3 seconds and return to the original position automatically. Mosaic shaped distortion may appear on the screen while in Record Search mode.
[ ENGLISH ] Basic Recordin l • • While recording, it is veryimportant to hold the camcorder correctly. Fix the LENS cap firmly by clipping it to the hand strap. (refer to the figure) 1. Hold the camcorder firmly using the hand strap. 2. Place your right elbow against your side. 3. Place your left hand under or beside the LCD to support and adjust it. Do not touch the built-in microphone. 4. Choose a comfortable, stable position for the shots that you are taking.
[ENGLISH] Basic Recordin l Your camcorder is equipped with a 2.5 inch color Liquid Crystal Display(LCD) screen, which enables you to view what you are recording or playing back directly. @ Depending on the conditions under which you are using the camcorder (indoors or outdoors for example), you can adjust ; • BRIGHT SELECT • BRIGHT ADJUST • COLOR ADJUST 1. Set the POWER switch to CAMERA position. • In the PLAYER mode. you may only setup the LCD while the tape is playing. 2.
IENGLISH_ Basic Recordin l 8, Press the ENTER button again, • You may select NORMAL or SUPER in the BRIGHT SELECT feature and pressthe ENTER button to save the setting, • Use the MENU DIAL to adjust the value of BRIGHT ADJUST and COLOR ADJUST, • Youcan set values for BRIGHT ADJUST between 00 ~ 35 and COLOR ADJUST between 00 ~ 35, 9, Press the MENU button to finish the setting. The VIEWFINDER will not work when the LCD is open. Use the focus adjustment knob of the VIEWFINDER to focus the picture.
[ENGLISH Basic Recordin l •l, You can monitor the playback picture on the LCD monitor. •l, Make sure that the battery pack is in place. 1. Hold down the power switch tab and turn it to the PLAYER position. 2. Insert the tape you wish to view.(see page 27) 3. Open the LCD screen. Adjust the angle of the LCD screen and set the brightness or color if necessary. 4. Press the _ (REW) button to rewind the tape to the starting point. • To stop rewinding, press the ==(STOP) button.
I ENGLISH Basic Recordin l _, Youcan adjust the LCD during playback. _, The adjustment method is the same procedureas used in CAMERA mode. (see page 31) The Speaker works in PLAYER mode only. • When you use the LCD screen for playback,you can hear the recorded sound from the built-in Speaker. - Follow the instructions below to decrease or mute speaker volume in the PLAYER mode. - Take the following steps to lower the volume or mute the sound while playing a tape on the camcorder. 1.
[ENGLISH Advanced MENU Recordin l AvaiJable mode SUB MENU CAMERA PLAYER INiTiAL CLOCK SET IZ DEMO I/ PROGRAM AE WH_ BALANCE D.ZOOM DIS DSE SELECT v* v" IZ REC MODE PHOTO SEARCH COPY AUDIO MODE AUDIO SELECT WiND CUT PB DSE 1/ f/ Memory REC, Memory PLAY V' _" (SCD24 only) CAMERA AN MEMORY VIEWER i/ v" v" PHOTO QUALITY PRINT MARK PROTECT FiLE NO DELETE FORMAT LCD ADJUST DATE_ME TV D_SPLAY J iZ iz I/ _ J _ J i/ i/ v" v" v" _ _ _ J J J v" v" v" 1, Press the MENU button.
ENGLISH_ Advanced Recordin l Digital _st_Requested Mode _ DIS DIS D.ZOOM DigitalfunctiOnSpHoTO SLOW D.ZOOM (TAPE) SHUTTER 0 0 PHOTO X X SLOWSHUTTER A × special effects NITE PIX 0 A o o 0 * A o o x O x o 0 DigitalSpecialEffects 0 0 0 o NITEPIX 0 0 0 o o A × 0 X A * :The requested mode will work in this operating mode, :You can not change the requested mode. :The operating mode will be released and the requested mode will work.
[ENGLISH] Advanced Recordin l + CLOCK setup works in CAMERA, PLAYER, MREC and MPLAY modes. 4' The DATE/TIMEis automatically recorded onto a tape, Before recording, please set the DATE/TIME 1, Press the MENU button. • The menu list will appear. 2, Turn the MENU DIAL to highlight INITIAL and press the ENTER button, 3, Use the MENU DIAL to select CLOCK SET from the submenu. 4, Press the ENTER button to enter SETTING mode, • A blinking item indicates the item to be changed. The year will blink first.
ENGLISH_ Advanced Recording! al' R D24 only) *_ The REMOCON function works in CAMERA, PLAYER, M.REC and MPLAY modes. *_ The REMOCON option allows you to enable or disable the remote control for use with the camcorder. 1, Press the MENU button. • The menu list will appear. 2, Turnthe MENU DIAL to highlight INITIAL and press the ENTER button.
[ENGLISH] Advanced Recordin l ON _, Demonstration automatically shows you the major functions that are included with your camcorder so that you may use them more easily. _, The DEMONSTRATIONfunction may only be used in the CAMERA mode without a tape insertedinthe camcorder. _, The demonstration operates repeatedly until the DEMONSTRATIONmode switched OFE 1. Set the camcorder to CAMERA mode. 2. Press the MENU button. • The menu list will appear. 3. Turn the MENU DIAL to highlight INITIAL. 4.
ENGLISH_ Advanced Recordin l •l. The PROGRAM AE function works in CAMERA mode only. •l. The PROGRAM AE mode allows you to adjust shutter speeds and apertures to suit different recording conditions. •I. They give you creative control over the depth of field. • AUTO mode * Auto balance between the subject and the background. * To be used in normal conditions. * Theshutterspeedautomaticallyvariesfrom1/60tof/250persecond, • dependingonthescene.
[ENGLISH] Advanced Recordin l 1, Press the MENU button. • The menu list will appear. 2, Turn the MENU DIAL to highlight CAMERA and press the ENTER button. 3, Select PROGRAM AE from the submenu, 4, Press the ENTER button to enter the sub-menu. 5, Using the MENU DIAL, select the PROGRAM AE mode. • Press the ENTER button to confirm the PROGRAM AE mode. IpCAMERA !_3D ZOOM 6, To exit, press the MENU button, _DSE SET _pCAMERASET .......................... SELECT ....................
ENGLISH_ Advanced Recordin l 4' The WHITE BALANCE function works in CAMERA or MREC mode only. 4' The WHITE BALANCE is a recordingfunction that preserves the unique color of the object in any recording condition. 4' You may select the appropriate WHITE BALANCE mode to obtain good quality color of the image. • AUTO (ra) :This mode is generally used to control the WHITE BALANCE automatically. • HOLD (al,) :This fixes the current WHITE BALANCE value.
[ENGLISH] Advanced Recordin l ith DIGITALZOOM ,'_ Zoom works in CAMERA mode only. _, Zooming is a recording technique that lets you change the size of the subject in a scene. For more professional looking recordings, do not use the zoom function too often. _' You can zoom using variable zoom speeds. _' Use these features for different shots. Please note that over-use of the zoom feature can lead to unprofessional looking results and a reduction of battery usage time. 1.
I ENGLISH Advanced Recordin l •l, Zooming more than 10x is achieved digitally. •l, The picture quality may deteriorate depending on how much you zoom in on the subject. •l, We recommend that you use the DIS feature with DIGITAL ZOOM for picture stability. (see page 45) 1. Set the camcorder to CAMERA mode. €= LNITLAL 2. Press the MENU button. • The menu list will appear. _ _!i _ PROGRAMAE _vv °SE SELECT °°,2,, .................. = 3. Turnthe MENU DIAL to CAMERA and press the ENTER button. 4.
[ENGLISH Advanced Recordin l *_ The DIS function works in CAMERA mode only. DIS (Digital Image Stabilizer) is a function that compensates for any shaking or hand movement while holding the camcorder (within reasonable limits). It provides more stable pictures when: • Recording with the zoom • Recording a small object close-up • Recording and walking at the same time • Recording through the window of a vehicle 1. Set the camcorder to CAMERA mode. 2. Press the MENU button. • The menu list will appear. 3.
[ENGLISH] Advanced _, _, _, _. Recordin l The DSE function worksin CAMERA mode only. The digital effects enable you to give a creative look to your recording by adding various special effects. Select the appropriate digital effect for the type of picture that you wish to record and the effect you wish to create. There are 9 DSE modes. a. ART mode This mode gives the images a coarse effect. b. MOSAIC mode This mode gives the images a mosaic effect. c.
[ENGLISH Advanced Recordin l 1, Set the camcorder to CAMERA mode. 2, Press the MENU button. • The menu list will appear. 3, Turn the MENU DIAL to highlight CAMERA and press the ENTER button. 4, Select DSE SELECT from the submenu, 5, Press the ENTER button to enter the sub-menu. 6, Using MENU DIAL, select the DSE mode.
ENGLISH_ Advanced Recordin l *_ The REC MODE function worksin both CAMERA and PLAYER(DVIN) modes. This camcorder records and plays back in SP (standard play) mode and in LP (long play) mode. • SP (standard play): This mode permits 60 minutes of recording time with a DVM60 tape. • LP (long play):This mode permits 90 minutes of recording time with a DVM60tape. 1. Set the camcorder to CAMERA or PLAYERmode. 2. Press the MENU button. • The menu list will appear. 3.
[ENGLISH] Advanced Recordin l bOibMbbE _, The AUDIO MODE function works in CAMERA mode. _, This camcorder records sound in two ways. (12bit. 16bit) • 12bit : Youcan record two 12bit stereo sound tracks. The original stereo sound can be recorded onto the MAIN (SOUND1) track. Additional stereo sound can be dubbed onto the SUB (SOUND2) track. • 16bit :You can record one high quality stereo sound using the 16bit recording mode. Audio dubbing is not possible when using this mode.
ENGLISH Advanced Recording! _, The WIND CUT function works in CAMERA, PLAYER(SCD24 only) mode. _, The WIND CUT function minimizes wind noise or other noise while recording, - When the wind cut is on, some low sounds are eliminated along with the sound of the wind. 1, Set the camcorder to CAMERA mode, 2, Press the MENU button. • The menu list will appear. 3, Turnthe MENU DIAL to highlight NV and press the ENTER button.
[ENGLISH Advanced I Recordin l *_ The DATE/TIMEfunction works in CAMERA, PLAYER, M.REC and MPLAY modes. The date and time are automatically recorded on a special data area of the tape. 1. Press the MENU button. • The menu list will appear. 2. Turn the MENU DiAL to highlight VIEWER and press the ENTER button. 3. Turn the MENU DIAL to highlight DATE/TIME. 4. Press the ENTER button to select the sub-menu. 5. Using the MENU DIAL, select the DATE/TIMEmode.
ENGLISH_ Advanced Recordin l _, The TV DISPLAYfunction works in CAMERA, PLAYER, MREC and MPLAY modes. _' Youcan select the output path of the OSD (On Screen Display). • OFF:The OSD appears in the LCD screen only. • ON:The OSD appears in the LCD screen, EVF and TV. • Use the DISPLAY button located at the left side of the camcorder to turn ON/OFF all of the OSD displayed on the LCD/EVF/TV. 1. Set the camcorder to CAMERA, PLAYER, MREC and M.PLAY mode. 2. Press the MENU button. • The menu list will appear.
[ENGLISH] Advanced Recordin l Quick menu is available only in CAMERA mode. Quick menu is used to adjust camera functions by simply using the MENU SELECTOR button. This feature is useful for when you want to make simple adjustments without having to access the menus and submenus. • DATE/TIME - Each time you select DATE/TIMEand press the ENTER button, it will be displayed in the orderof DATE- TIME - DATE/TIME- OFF(See page 51).
IENGLISH_ Advanced Recordin l • WriT. BALANCE (see page 42) Each time you select WHT.BALANCE and press the ENTER button, you can choose between preset WHT.BALANCE values and AUTO.As in PROGRAM AE, you can't choose between Auto and WHT.BALANCE values it they have not been preset.. • FOCUS (Manual Focus/Auto Focus) (see page 58) - Each time you select FOCUS and pressthe ENTER button,the FOCUS is switched to either Manual Focus (MF) or Auto Focus (_).
[ENGLISH 1 Advanced Recordin l _' You can set SHUTTER SPEED and EXPOSURE only in CAMERA mode. _, SHUTTER SPEED and EXPOSURE values can on(y be set in the Quick Menu. _, SHUTTER SPEED and EXPOSURE are automatically switched and/or deactivated. 1. Set the powerswitchto CAMERA mode. 2. Turn the MENU DiAL until you see icon(li'=l) on, and then press the ENTER button. • You see a screen on which you can select SHUTTER SPEED and EXPOSURE.
I ENGLISH Advanced Recording 4, The SLOW SHUTTER function works in CAMERA mode only. 4, The shutter speed can be controlled, allowing you to record stow moving objects. 1. Set the power switch to CAMERA mode. 2. Press the SLOW SHUTTER button. 3. Each time you press the SLOW SHUTTER button, SHUTTER SPEED is changed to 1/30, 1/15, 1/8, off. 4. To exit, press the SLOW SHUTTER button. • • ,& When using "SLOW SHUTTER" the image takes on a slow motion like effect.
[ENGLISH 1 Advanced Recording The EASY mode allows a beginner to easily make good recordings. • The EASY mode only operates in CAMERA mode. f, Set the powerswitchto CAMERA mode. 2. By pressing the EASY button, all functions on the camera will be set to off and the recording settings will be set to the following basic modes: • Battery level, recording mode, counter, DATE/TIME,and DIS (_0_) will be displayed. • The word "EASY.Q"will appear on the LCD at the same time.
ENGLISH] Advanced Recording ,t, The MF/AF function works in CAMERA, MREC mode only. •I, In most situations, it is better to use the automatic focus feature, as it enables you to concentrate on the creative side of your recording. •I, Manual focusing may be necessary under certain conditions that make automatic focusing difficult and/or unreliable. [ •l, If you are inexperienced in the use of camcorders, we recommend that you make use of Auto Focus.
[ENGLISH Advanced Recording BLC works in CAMERA!MREC mode. Back lighting exists whenthe subject is darker than the background: • The subject is in front of a window. • The person to be recorded is wearing white or shiny clothes and is placedagainst a bright background; the person's face is too dark to distinguish his/her features. • The subject is outdoors and the background is overcast. • The light sources are too bright. • The subject is against a snowy background. 1. Set the powerswitchto CAMERA mode.
ENGLISH] Advanced Recording 4, The FADE function works in CAMERA mode only. 4, Youcan give your recordings a professional look by using special effects such as fading in at the beginning of a sequence or fading out at the end of a sequence. 1. Before recording, hold down the FADE button. The picture and sound gradually disappear (fade out). 2. Press the START/STOPbutton and at the same time release the FADE button. Recording starts and the picture and sound gradually appear (fade in). 3.
[ENGLISH Advanced Recording The AUDIO DUBBING function only works in PLAYER Mode. You can add sound to the original sound on a pre-recorded tape. recorded in SP mode with 12bit sound. Use the internal and external microphones or other audio equipment. The original sound will not be erased. 1. Set the camcerder to PLAYER mode. • If you want to use an external microphone, connect the microphone to the external MIC input jack on the camcorder. 2.
ENGLISH_ Advanced Recording 1, Insert the dubbed tape and press MENU button. 2, Turnthe MENU DIAL to highlight AN. 3, Press the ENTER button to enter the sub-menu. 4, Use the MENU DIAL to select AUDIO SELECT from the submenu. 5, Press the ENTER button to enter the sub-menu. 6, Using the MENU DIAL, select the AUDIO playback channel. • Press the ENTER button to confirm the audio playback channel. - SOUND1 : play the original sound.
[ENGLISH] Advanced Recording 1. Press the PHOTO button and hold it. • The still picture appears on the LCD monitor, • If you do not wish to record, release the button, 2. Release the PHOTO button and pressthe PHOTO button again in 2 seconds. • The still picture is recorded for about 6-7 seconds. 3. After the PHOTO has been recorded, the camcorder returns to STBY mode. The PHOTO SEARCH works in PLAYER and MPLAY mode only. _N_TIAL 1. • • Press the MENU button.
I ENGLISH Advanced Recording 4. The NITE PIX function works in CAMERA/M.REC mode. 4. The NITE PIX function enables you to record a subject in darkness. 1. Set the camcorder to CAMERA or MREC mode. 2. Slide the NITE PIX switch to ON. • I_] (NITE PIX indicator) appears on the LCD monitor. • The infrared(invisible rays) light is turned on automatically. 3.
[ENGLISH Advanced Recording The POWER NITE PIX function works in CAMERA mode. The POWER NITE PIX function can record a subject more brightly in darkness than the NITE PIX function. A POWER NITE PIX is displayed for three seconds by LCD if you press a SLOW SHUTTER button in state that a NITE PIX switch is turned on. When you work in POWER NITE PIX mode, POWER NITE PIX icon appears on the LCD continuously. 1. Set the camcorder to CAMERA mode. 2.
ENGLISH Advanced Recording VIDEO LIGHT works in CAMERA or M.REC mode only. To brighten the scene when natural lighting is too dim. VIDEO LIGHT works in SP mode only. - If you turn on the LIGHT in LP mode, the LIGHT indicator and "LP" will be blinking on the LCD. • • • • The VIDEO LIGHT can become extremely hot. Do not touch it either while in operation or soon after turning it off, otherwise serious injury may result.
[ENGLISH Advanced Recording •Z, In some situations different recording techniques may be required for more dramatic results. Please rotatethe LCD screen carefully as excessive rotation may cause damage to the inside of the hinge that connects the LCD screen to the Camcorder. Making a recording with a top view of the LCD screen. __/ 4 Making a recording viewing the LCD screen from below. Making a recording viewing the LCD screen from the front.
I ENGLISH Playback •Z, The playbackfunction works in PLAYERmode only, _, It is practical to view a tape using the LCD when in a car or outdoors, _, To play back a tape, the television must have a compatible color system.
[ENGLISH 1 Playback 4. You can connect your camcorder to a TV through a VCR. 1. Connect the camcorder and VCR with the AudioA/ideo cable. • The yellow plug : Video • The white plug : Audio(L) • The red plug : Audio(R) - STEREO only 2. Connect a TV to the VCR. 3. Set the power switch on the camcorder to PLAYER mode. 4. Turn on both the TV and VCR. • Set the input selector on the VCR to LINE. • Select the channel reserved for your VCR on the TV set. 5. Play the tape back. 4.
ENGLISH_ Playback •Z, The PLAY/STILL,STOP, FF, REW buttons are located on the camcorder and the Remote Control. •Z, The EADV(Frame advance), X2, SLOW buttons are located on the Remote Control only.(SCD24 only) •Z, To prevent tape and head-drum wear, your camcorder will automatically stop if it is left in STILL or SLOW modes for more than 5 minutes. _, Press the 1,/11(PLAY/STILL)button during Playback. _, To resume playback,pressthe I_/11(PLAY/STILL)button.
[ENGLISH] Playback • • Press the EADV buttonon the Remote Control while in Still mode, The EADV function works in still mode only. To resume normal playback, press the )/11 (PLAY/STILL)button. 4, Forward frame advance • Press the EADV button on the remote control in Still mode.
I ENGLISH Playback 4, The MEMORY function works in both CAMERA and PLAYER modes. 4, You can mark a point on a tape that you want to return to following playback. 1. Press the ZERO MEMORY button on the remote control during playback or recording at the point you wish to return to. • The time code is changed to a tape counter that is set to zero memory with the [] 0:0O:00(Zeromemory indicator) • tt you want to cancel the zero memory function, press the ZERO MEMORY button again. 2. Finding the zero position.
[ENGLISH I Playback 4. The PB DSE function works in PLAYER mode. 4. The PB DSE function enables you to apply Digital Special Effect (DSE) to tape playback or still images. 1. Set the camcorder to the PLAYER mode and then Playback a tape. 2. Press the MENU button and turn the MENU DIAL to highlight AN. 13 _N_T_AL 3. Press the ENTER button to enter the sub-menu. 4. Select PB DSE from the sub-menu and press the ENTER button. 5. Press the ENTER button to enter the sub-menu. 6. Select PB DSE item (off.
I ENGLISH Playback _, The PB ZOOM function works in PLAYERmode. _, The PB ZOOM function enables you to magnify playback or still image. 1. Press the PB ZOOM button in playback mode or in playback still mode 2. The image is magnified starting from the center of image and the four arrows which allows you to move the image in the four directions appear. 3. Youcan zoom in from 1.2x to &0x by moving the zoom lever. 4. Youcan move the image in the arrow directions using the MENU DIAL. 5.
[ENGLISH] IEEE 1394 Data Transfer _. Connecting with other DV standard products. • A standard DV connection is quite simple. If a product has a DV port, you can transfer data by connecting to the DV port using the correct cable. !!! Please be careful since there are two types of DV ports, (4pin, 6pin). This camcorder has a 4pin terminal. _. With a digital connection, video and audio signals are transmitted in digital format, allowing high quality images to be transferred. •_.
I ENGLISH IEEE 1394 Data Transfer • • • • CPU :faster Intel® Pentium lIF M450Mhz compatible. Operating system :Windows®98SE, ME, XP, Mac OS (9,1~10,2) Main memory : more than 64 MB RAM IEEE1394 add-on card or built in IEEE1394 card 1. Set the power switch to PLAYERmode. 2. Connect the DV cable (not supplied) from the DV IN/OUT port of the camcorder to the DV IN/OUT port of the other DV device. • Make sure that DV iN appears on the screen. 3. Press the START/STOPbutton to begin REC PAUSE mode.
[ENGLISH USB interface 4' Youcan easily transfer a still image from a MEMORY STICK to a PC without additional add-on cards via a USB connection. 4' Youcan transfer an image to a PC via a USB connection. 4' If you transfer data to a PC, you need to install the software (Driver, Editing software) supplied with the camcorder.
ENGLISH] USB interface Do not connect the camcorder to PC before installing the program. If another camera or scanner is connected, please disconnect it in advance. This explanation is based on Windows®98SE OS. 1. Insert the software CD intoCD-ROM drive. - Installation selection screen appears in the monitor. 2. If the installation selection screen does not appear after inserting the CD click "Run" on the Windows "Start" menu and execute SETUREXE file to begin installation.
[ENGLISH USB interface 1. Connect a USB cable to the USB port on the PC. 2. Connect the other end of the USB cable into the proper terminal on the camcorder. (USB jack) After completing the data transmission, you must disconnect the cable in the following way: 1. Select the removable disc icon and click the right mouse button to select [Eject]. 2. Select [Confirm] and disconnect the USB cable when the Windows Splash screen appears.
[ ENGLISH ] Digital Still Camera mode The Memory Stick(SCD24 only) stores and manages still images recorded by the camera. Recording still images Viewing still images • Single • Slide show Protecting images against accidental erasure Deleting images recorded on a card Print marking still images Formatting a card (SCD24 only) • • • Youcan use most of the camera's functions when recording to the Memory Stick. "k_" r_l" appears on the screen while recording to the Memory Stick.
[ENGLISH Digital Still Camera mode Insert( ry Stick • Inserting the Memory Stick 1. Turn the Power switch to OFF. 2. Insert the Memory Stick into the CARD slot located beneath the camcorder, in the direction of the arrow. • 1. 2. 3. • • • Ejecting the Memory Stick Turn the Powerswitch to OFE Push the Memory Stick, then it comes out of the camcorder automatically. Pull out the Memory Stick. If you set the camcorder to M.PLAY mode, the last recorded still image appears.
ENGLISH_ Digital Still Camera mode _, The still images that you recorded are saved in JPEG file format on the card. _, Each file has a file number and all files are assigned to a folder. • A file number from DCAMO001to DCAM9999 is sequentially assigned to each recorded image. • Each folder is numbered from 100SSDVCto 999SSDVC and recorded on the CARD. 1°oli DCIM DCAM 0001 DCAM 0002 _, Still image • Images are compressed in JPEG (Joint Photographic Experts Group) format.
[ENGLISH I Digital Still Camera mode 4, Youcan select the quality of a still image to be recorded. 1. Set the mode switch to MEMORY STICK. 2. Set the power switchto the CAMERA mode. 3. Press the MENU button. • The menu list willappear. 4. Turn the MENU DIAL to highlight MEMORY. 5. Press the ENTER button to enter the sub-menu. 6. Turn the MENU DIAL to highlight QUALITY in the submenu. 7. Press the ENTER button. 8. Using the MENU DIAL, select the image quality.
I ENGLISH Digital Still Camera mode Audio cannot be recorded with still image onto the Memory Stick. 1. Set the mode switch to MEMORY STICK. 2. Set the power switch to CAMERA. 3. Press the PHOTO button and hold it. • The still picture appears on the LCD monitor. • If you do not wish to record, release the button and wait for more than 2 seconds. 4. Release the PHOTO button and press the PHOTO button again in 2 seconds. • The still image is recorded to the Memory Stick.
[ENGLISH] Digital Still Camera mode Recording as a still imago, _' Youcan record still image from a cassette onto a Memory Stick. _, If you want to recorded multiple still images from a cassette to a Memory Stick. use the COPY function. f. Set the mode switch to TAPE. 2. Set the power switchto PLAYER mode. 3. Play back the cassette. 4. Press the PHOTO button and hold it. • The camcorder is set to playback pause(STILL) mode.
ENGLISH_ Digital Still Camera mode •Z, You can playback and view still images recorded on the Memory Stick. •%.There are 2 ways to view recorded images. • Single :To view an image frame by frame. • Slide show : Toview all images automatically and in consecutive order. 1. Set the mode switch to MEMORY STICK. 2. Set the power switch to PLAYERmode. • The last recorded image appears. - If there are no recorded images on the Memory Stick, NO STORED IMAGE[ and t_l will display on the screen. 3.
[ENGLISH] Digital Still Camera mode Youcan copy still images recorded with PHOTO function on a cassette onto a Memory Stick. 1, Set the power switchto the PLAYER mode. 2, Press the MENU button. 3, Turn the MENU DIAL to highlight AN and press the ENTER button, • The submenu will appear. 4, Turn the MENU DIAL to highlight PHOTO COPY and press the ENTER button, • All still images that recorded on a cassette will be copied to a Memory Stick.
I ENGLISH Digital Still Camera mode •Z, This camcorder supports the DPOF (Digital Print Order Format) print format. •Z, You can automafically print images recorded on a Memory Stick with a printer supporting DPOE •Z, There are 2 ways to make a PRINT MARK. • THIS FILE :You can set a printmark on the photo image displayed on the LCD. • ALL FILES :To print1 copy each of all of the stored images. 1. Set the mode switch to MEMORY STICK. 2. Set the power switch to PLAYER. • The last recorded image appears. 3.
[ENGLISH] Digital Still Camera mode You can protectimportantimagesfrom accidental erasure. • If you execute FORMAT,all images including protected images will be erased. 1. Set the mode switch to MEMORY STICK. 2. Set the powerswitchto PLAYER. • The last recorded image appears. • If there are no recorded images on the Memory Stick, NO STORED IMAGE! and [] will display on the screen. 3. Using the )_" (FWD) and _ (REV) buttons, search for the still image that you want to protect. 4. Press the MENU button. 5.
I ENGLISH Digital Still Camera mode •t. Youcan erase the still imagesrecorded on the Memory Stick. •t. If you want to delete protectedimages, you must first deactivate the image protection. •t. An image which has been deleted cannot be recovered. 1, Set the mode switch to MEMORY STICK. 2, Set the power switch to PLAYER. 3. Using the _ (FWD) and _N(REV) buttons, search for the still image that you want to delete. 4. Press the MENU button.
[ENGLISH I Digital Still Camera mode You can use the MEMORY FORMATfunctions to completely delete all images and options on the Memory Stick, including protected images. The format function restores the Memory Stick to its initial state. The Memory Stick supplied with this camcorder has been formatted already. If you execute the MEMORY FORMATfunction, all images will be erased completely and erased images cannot be recovered. 1. 2. 3. 4. 8. g. Set the mode switch to MEMORY STICK.
[ ENGLISH ] Maintenance At the end of a recording you must remove the power source. When recording with a Lithium Ion Battery Pack, leaving the pack on the camcorder can reduce the life span of the battery. Hence, it should be removed from the camcorder. 1. Slide the TAPE OPEN/EJECT switch in the direction of the arrow. • Opening the cassette door ejects the tape automatically. • Please wait while the tape is completely ejected. 2.
[ENGLISH] Maintenance Toensure normal recording and clear pictures,clean the video heads when the playback pictures display square block-shaped noise or distortion, or a blue screen appears. 1. 2. 3. 4. Set the powerswitchto PLAYER mode. Insert the cleaning tape. Pressthe I_/II(PLAY/STILL) button. Press the • (STOP) button after 10 seconds. • Check the quality ofthe pictureusing a videocassette. If the picture quality has not improved, repeat the operation.
ENGLISH_ Maintenance Each country or region has its own electric and color systems. Before using your camcorder abroad, check the following items. • • Youcan use your camcorder in any country or area with the supplied AC Power Adapter within 100V to 240V, 50/60 Hz. Use a commercially available AC plug Adapter, if necessary, depending on the design of the local wall outlet. • Youcan viewyour recording in the viewfinder.
[ENGLISH Troubleshooting Before contacting a Samsung authorized service center, perform the following simple checks, They may save you the time and expense of an unnecessary call.
[ ENGLISH ] Troubleshooting MEMORY STICK! Slow There no Memory stick in the eam_rder Insert a Merhory Stick MEMORY FULL! Slow Thereis not enough rherhory to record Char_ge to a new Memory S_ck Erase re_rd_ image NO STORED IMAGE! slow There are no images recorded on the Memory Stidt Record new images WRITE PROTECT! slow The Memory Stick is record irotected Releasethewriteprotect tab on the Memory Stick PROTECT! slow When you try to delete to protected image¸ Cancel the protect of image
[ENGLISH Troubleshooting "_, If these instructions do not soNe your problem, contact your nearest Samsung _61_ii_is_J_!! You cannot on. switch the camcorder Check the battery pack or the AC Power Adapter. START/STOP button does not operate while recording. Check the POWER switch is set to CAMERA. You have reached the end of the cassette. Check the record protection tab on the cassette. The camcorder goes off automatically.
[ ENGLISH ] Specifications Video signal Video recording system Audio recordingsystem Usable cassette Tape speed Tape recordingtime FFAEW time Image device Lens Filter diameter NTSC 2 rotaryheads,Helicalscanningsystem Rotary heads,PCMsystem Digitalvideotape (6.35mmwidth):Mini DVcassette SP: approx.18.81mm/s LP:approx.12.56mrrgs SP: 60 minutes(when using DVM60), LP:90 minutes(when usingDVM60) Approx.180 sac.(using DVM60tape) CCD (ChargeCoupledDevice) F1.
[ENGLISH I INDEX AAccessories ............................................................................................... 12 Audiodubbing(SCD24only) ...................................................................... 61 AUDIO MODE ........................................................................................... 49 Memory Stick(SCD24only) ................................................................. 80, 84 MF/AF .........................................................................
[ ENGLISH ] Warranty SAMSUNG LIMITED WARRANTY SAMSUNG Electronics America Inc. (SEA), warrants that this product is free from defective material and workmanship. SEA further warrants that if product fails to operate properlywithin the specified warranty period and the failure is due to improper workmanship or defective material, SEA will repair or replace the product at it's option. All warranty repairs must be performedby a SEA authorized service center.
IENGLISH_ THIS CAMCORDER IS MANUFACTURED SERVICE BY: DIVISION 400 Valley Road, Suite 201, Mt. Arlington Tel: 1-800-SAMSUNG N.J. 07856 (1-800_726-7864) *Samsung Electronics' Internet Home Page http://www.samsungusa.
