HD-SDI CAMERA User Manual SCD-6021-ENGLISH-131230.
HD-SDI Camera User Manual Copyright ©2013 Samsung Techwin Co., Ltd. All rights reserved. Trademark is the registered logo of Samsung Techwin Co., Ltd. The name of this product is the registered trademark of Samsung Techwin Co., Ltd. Other trademarks mentioned in this manual are the registered trademark of their respective company. Restriction Samsung Techwin Co., Ltd shall reserve the copyright of this document.
overview Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. ● overview 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings, Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9.
overview WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. DO NOT INSERT ANY METALLIC OBJECT THROUGH THE VENTILATION GRILLS OR OTHER OPENNINGS ON THE EQUIPMENT. Apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus. CAUTION CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK. DO NOT REMOVE COVER (OR BACK).
Class construction An apparatus with CLASS construction shall be connected to a MAINS socket outlet with a protective earthing connection. Batteries(battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like. Disconnection Device ● overview Battery Disconnect the main plug from the apparatus, if it’s defected. And please call a repair man in your location. When used outside of the U.S.
overview Please read the following recommend safety precautions carefully. yy Do not place this apparatus on an uneven surface. yy Do not install on a surface where it is exposed to direct sunlight, near heating equipment or heavy cold area. yy Do not place this apparatus near conductive material. yy Do not attempt to service this apparatus yourself. yy Do not place a glass of water on the product. yy Do not install near any magnetic sources. yy Do not block any ventilation openings.
CONTENTS 3 8 9 10 Important Safety Instructions Product Features What’s Included At a Glance installation & connection 13 16 Installation Connecting with other Device Operating Your Camera 20 21 Menu Configuration Menu Setup appendix 36 38 39 Specification Product Overview Troubleshooting 3 ● overview overview 13 SCD-6021-ENGLISH-131230.
overview Product Features •• Supports Full HD-SDI Video By adopting a diagonal 6mm (1/3”) 2M pixel CMOS, the camera produces clear picture quality. •• Excellent low-illumination image quality By adopting high-sensitive colour CMOS, the camera provides clear image quality under a severe low illumination condition of 0.008 Lux .
WHat’S IncLuDeD Check if the main unit and all the following accessories are included in the product package. Camera 1 3.MD_OU 4.RS_485+ 5.RS_485- 3.MD_OU 4.RS_485+ 5.RS_485- Description 3.MD_OU 4.RS_485+ 5.RS_485- Quantity ● oVerVIeW Item Name 3.MD_OU 4.RS_485+ 5.RS_485- Appearance SAMSUNG SAMSUNG 3.MD_OU 4.RS_485+ 5.RS_485- BLAC 485N: GREE W: 485+UT YELLO: MD_O N BLUE : EXT_D GND GRAY K: 1 1.GN 2.EXT_DN SCD-6021-ENGLISH-131230.
overview at a GLance 5.RS _OU + 3.MD _485 4.RS _485 appearance Item Description a Top cover Case cover used to protect the lens and the main unit. b Camera Case Covers the lens and camera body. 10_ overview SCD-6021-ENGLISH-131230.
Inside _OU + 3.MD _485 4.RS _485 5.RS ● oVerVIeW 1.GN 2.EXT_DN SCD-6021-ENGLISH-131230.
overview Item Description a Internal Cover It is a cover to protect the main body. b Lens Lens for the camera. The switch is used for setting and adjusting the camera’s functions and properties. _/+ c SETUP Switch $/% d I/O Port Move this switch left or right to move the cursor or change the value in the menu. Move this switch up or down to move the cursor in the menu. ▪ Press the switch to set the function in menu. To move to a sub-menu item in the menu, press this switch.
installation & connection InStaLLatIon precautions before installation Ensure you read out the following instructions before installing the camera: Disassembling OU 3.MD_ 85+ 4.RS_4 855.RS_4 1. Use one hand to hold the camera’s bottom part and turn the cover counterclockwise with another hand to separate it. ● InStaLLatIon & connectIon • It must be installed on the area (ceiling or wall) that can withstand 5 times the weight of the camera including the installation bracket.
installation & connection Installation 1. Attach the installation template to the selected area and punch 2 holes as shown in the figure. 2. Use the 2 supplied screws to fix the camera to the 2 punched holes. ` Set the mark imprinted on the camera to face the direction of camera monitoring. Locking direction (Clockwise) Unlocking direction (Anti-clockwise) 3. Connect the camera internal terminal with the corresponding cable. 4.
Adjusting the monitoring direction for the camera Panning ● installation & connection Tilting Rotation ❖❖ Adjusting the monitoring direction You can adjust the camera direction only when the camera is fixed on the ceiling. Where, rotating the camera unit to the left or right is called Pan, adjusting the tilt is called Tilt, and turning the lens on its axis is called Rotation. -- The effective range of pan is a total of 354 degrees. -- The effective range of rotation is a total of 355 degrees.
installation & connection connectInG WItH otHer DeVIce DVR System Controller or Test monitor for installation R+ T+ T- R- CONVERTER RS232C RS485, 422 U 3.MD_O85+ 4.RS_4 855.RS_4 N: 485 + EE 485 GR W: UT _O N LLO YE E: MD T_D BLU : EX GND AY : GR CK BLA RS-485 Converter PC Motion detection output device Day/Night mode controller connecting to the monitor Connect the video out port of the camera to the video input port of the monitor.
Video Cable Maximum video transfer distance Recommended cable specification 100~140m 5C2V(75ohm) 200m L-6CHD(75ohm) (SDI-specific Cable) RS-485 Communications Using RS-485 communication, the camera menu can be accessed using Samsung Techwin’s System Controller or the DVR. •• For accessing the camera from a computer Use a RS-485 converter to connect the camera’s control port with the computer’s serial cable.
installation & connection External Day/Night Switching Input Day/Night mode of the camera can be switched by signal from an external device. MM `` To(Pageuse28)this function, setting of the camera should be set to the . Motion Detection Signal Out Upon a motion detection, the port outputs signal for an external device for display or operation. When a motion is detected, the port outputs 3.3V signal. MM `` To use this function, setting of the camera should be set to .
Power Supply Use the screwdriver to connect each line (+, –) of the power cable to the corresponding power port of the camera. ● Operating Your Camera JJ `` Be careful not to reverse the polarity when you connect the power cable. `` Be sure to turn the power off the device to be connected. For DC Power Supply You can use either one of DC 12V/2A~4A adaptor. Resistance of copper wire [at 20°C (68°F)] Wire specification (AWG) #24(0.22mm2) #22(0.33mm2) #20(0.52mm2) #18(0.83mm2) Resistance (Ω/m) 0.
operating your camera Menu Configuration MAIN SETUP • BRIGHTNESS • SHUTTER • AGC • SENS-UP • DEFOG • RETURN • ATW • OUTDOOR • INDOOR • MANUAL • AWC ➝ SET SSDR • OFF • ON BACKLIGHT • OFF • WDR • BLC SSNR3 • ON • OFF • AUTO • EXTERN • COLOR • BASIC • DAY/NIGHT • BACKLIGHT • ITS • INDOOR • USER • CAM TITLE • IMAGE ADJ • INTELLIGENCE • PRIVACY • COMM ADJ • LANGUAGE • RESET • RETURN EXPOSURE WHITE BAL DAY/NIGHT PROFILE • HLC • B/W • BANK SPECIAL EXIT • EXIT 20_ Oper
Menu Setup To configure the camera’s function settings, use the button on the inside of the product. ● Operating Your Camera 1.GN 2.EXT_DN •• $% : Moves up/down in menu. •• _+ : Moves right/left in menu. •• ▪ : Press the switch to set the function in camera menu. To move to a sub-menu item in the menu, press this switch. 1. Press the SET button. •• Enters the function menu. The selected function’s menu appears on the monitor. MAIN SETUP Use up/down buttons to set the desired item. ► 1. 2. 3. 4. 5. 6.
operating your camera 3. Use the Right/Left buttons to select a desired function. •• Move the button right or left to display available values or settings. Set the desired setting value using the button. 4. To finish, select and press the SET button. with the icon also has sub menus. To select a sub menu, select an item with the icon MM `` Ananditem press the Function Setup switch. `` An item with the --- icon is unavailable due to function settings. EXPOSURE 1.
•• AGC(AUTO GAIN CONTROL) : The higher the gain level, the brighter the screen but the greater the noise. -- OFF : Not being used -- Low : Allows automatic gain control from 5.3dB to 20dB. ● Operating Your Camera -- Medium : Allows automatic gain control from 5.3dB to 26dB. -- High : Allows automatic gain control from 5.3dB to 32dB. •• SENS-UP : When it is night or dark, the camera automatically detects the light level and maintains a clear picture if this mode is activated.
operating your camera White Bal (White Balance) Use the White Balance function to adjust the screen color. 1. When the SETUP menu screen is displayed, select by using the Function Setup switch so that the arrow indicates . 2. Select a desired mode using the Function Setup switch. Select one of the following 5 modes, as appropriate for your purpose. MAIN SETUP 1. ► 2. 3. 4. 5. 6. 7. 8. 9.
SSDr (SamSunG Super DynamIc ranGe) 1. When the SETUP menu screen is displayed, select by using the Function Setup switch so that the arrow indicates . 2. Use the Function Setup switch to change the SSDR level in the sub menu according to the contrast between bright and dark areas. MAIN SETUP 1. 2. ► 3. 4. 5. 6. 7. 8. 9.
operating your camera BACKLIGHT This camera is designed so that it delivers a distinctive subject and background at the same time, even when the subject is in backlight, by adopting a function of the proprietary WN2 DSP chip. 1. When the SETUP menu screen is displayed, select by using the Function Setup switch so that the arrow indicates . 2. Select a desired mode using the Function Setup switch depending on the camera purpose.
JJ `` Because there can be a difference in the effectiveness of HLC according to the amount of light area in the screen, optimize the installation angle for the best HLC performance. ● Operating Your Camera `` When dark, the HLC is only activated when a bright light exceeding a specific size. `` The HLC is not activated in day light or when bright light is not present at night. SSNR3 This function reduces the background noise in a low luminance environment. 1.
operating your camera •• B/W : The picture is always displayed in black and white. •• AUTO : The mode is switched to in a normal environment, but switches to mode when ambient illumination is low. To set up the switching time for AUTO mode, press the Function Setup switch. -- DWELL TIME : You can select day/night switching delay time from. ➝ 5s, 7s, 10s, 15s, 20s, 30s, 40s, 60s DAY/NIGHT AUTO SETUP ► 1. COLOR B/W DWELL TIME DURATION 2. B/W COLOR DWELL TIME DURATION 3.
•• BANK : The system will automatically set if dark and bright area are all exist at same time, sothat you can recognize the object in bank easily. *In the PROFILE menu, you can configure the following camera settings at once.
operating your camera •• CAM TITLE : If you enter a title, the title will appear on the monitor. 1) If the SPECIAL menu screen is displayed, use the Function Setup switch so that the arrow indicates . 2) Set it to by using the Function Setup switch. 3) Press the Function Setup switch. CAM TITLE SETUP A B C NOP a b c n o p – .
•• IMAGE ADJ : 1) When the SPECIAL menu screen is displayed, select by using the Function Setup switch so that the arrow indicates . SPECIAL SETUP CAM TITLE IMAGE ADJ INTELLIGENCE PRIVACY COMM ADJ LANGUAGE RESET RETURN OFF OFF ● Operating Your Camera 1. ► 2. 3. 4. 5. 6. 7. 8. ENGLISH 2) Select a desired mode using the Function Setup switch. -- MONITOR : Please change the settings value of video appropriate to your monitor.
operating your camera •• INTELLIGENCE : Commands the camera to motion-detect and trace an object. -- DETECTION : Since the camera detects motion without any additional external sensor,you can monitor activity more effcient. -- TRACKING : Commands the camera to detect and trace a moving object. ►TYPE : Two types, line and area, of fences INTELLIGENCE ► 1. 2. 3. 4. 5. 6. 7. 8. DETECTION OFF TRACKING OFF FIXED/MOVED OFF TAMPERING OFF DETECT BOX OFF ALARM OUT OFF SETUP CONFIG OFF RETURN ► 1. 2.
► SEL POS X POS Y POS ... ... ... *... ... * ... ... ... ... ... POS1 106 12 DIR1 TRACKING ► SEL POS X POS Y POS POS1 ... ... ... *... ... * ... ... ... ... ... DIRECTION RETURN 70 30 IN ● Operating Your Camera DIRECTION RETURN TRACKING -- FIXED/MOVED : De tects an object that emerges or disappears from the screen, or stays onscreen without movement.
operating your camera ►DET. SIZE : Selects an object size to detect on the screen. When adjusting the detection size, note that the higher the level means the bigger detection size. ►RETURN : Select this to save the SETUP CONFIG menu settings and return to the INTELLIGENCE menu. -- RETURN : Select this to save the INTELLIGENCE menu settings and return to the SPECIAL menu. •• PRIVACY : Mask an area you want to hide on the screen.
►RETURN : Select this to save the TYPE 2 menu settings and return to the PRIVACYmenu. -- RETURN : Select this to save the PRIVACY menu settings and return to the SPECIAL menu. ● Operating Your Camera •• COMM ADJ (Communication Adjustment) : This function sets up the camera communication status when controlling the camera through an external control device. 1) When the SPECIAL menu screen is displayed, press the Function Setup switch so that the arrow indicates . COMMUNICATION SETUP ► 1. 2. 3. 4.
appendix Specification Items Video Lens Type pan / Tilt / Rotate Operational Description Video 1/3" Progressive Scan CMOS Total Pixels 2,010(H) x 1,108(V), 2.2M Pixels Effective Pixels 1,944(H) x 1,092(V), 2.1M Pixels Scanning System Progressive Scan Min. Illumination Color : 0.5Lux (F2.0, 50IRE), 0.008Lux (F2.0 Sen-up x60, 50IRE) Video Output SMPTE292M ( HD-SDI ) Lens Type Board-in type Mount Type - Max. Aperture Ratio F2.0 Focal Length 3.
Items Environmental Electrical Mechanical Privacy Masking Off / On (16 Rect-angle zones) Sens-up (Frame Integration) Auto/Off (2x ~ 60x) Gain Control Off / Low / Middle / High White Balance ATW / Outdoor / Indoor / Manual / AWC (1,700K° ~ 11,000K°) Electronic Shutter Speed Esc / A.
appendix Product Overview Unit : mm (inch) 56.3 (2.22") Ø 120 (4.72") 102 (4.02") R4 4.5 (1. 75 ") 38_ appendix SCD-6021-ENGLISH-131230.
Troubleshooting PROBLEM SOLUTION Nothing appears on the screen. yy When the camera’s HD-SDI BNC output is directly connected to the monitor’s BNC terminal: Make sure the monitor supports HD-SDI signal input. ● appendix yy Check that the power cord and line connection between the camera and monitor are properly connected. yy When the camera’s HD-SDI BNC output is connected to the DVR: Make sure the DVR supports HD-SDI signal input.
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.
SALES NETWORK SAMSUNG TECHWIN CO., LTD. Samsung Techwin R&D Center, 6, Pangyo-ro 319beon-gil, Bundang-gu, Songnam-si, Gyeonggi-do 463-400, Korea TEL : +82-70-7147-8740~60 FAX : +82-31-8018-3745 SAMSUNG TECHWIN AMERICA Inc. 100 Challenger Rd. Suite 700 Ridgefield Park, NJ 07660 Toll Free : +1-877-213-1222 Direct : +1-201-325-6920 Fax : +1-201-373-0124 www.samsungcctvusa.com SAMSUNG TECHWIN EUROPE LTD.
