Super High Resolution WDR Dome Camera User Manual SCD-3083
␃ 㢜 ■ ■ Super High Resolution WDR Dome Camera User Manual Copyright © Samsung Techwin Co., Ltd. All rights reserved. Trademark is the registered logo of Samsung Techwin Co., Ltd. The name of this product is the registered trademark of Samsung Techwin Co., Ltd. Other trademarks mentioned in this manual are the registered trademark of their respective company. Restriction Samsung Techwin Co., Ltd shall reserve the copyright of this document.
⏥ Before operating the camera, confirm the camera model and correct input power voltage. To help you understand this manual thoroughly, we’ll introduce our model description.
Safety information CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol indicates that dangerous voltage consisting a risk of electric shock is present within this unit.
6. Do not place conductive objects (e.g. screwdrivers, coins, metal parts, etc.) or containers filled with water on top of the camera. doing so may cause personal injury due to fire, electric shock, or falling objects. 8. If any unusual smells or smoke come from the unit, stop using the product. in such case, immediately disconnect the power source and contact the service center. continued use in such a condition may cause fire or electric shock. 9.
Safety information fCC sTATemeNT This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions : 1) This device may not cause harmful interference, and 2) This device must accept any interference received including interference that may cause undesired operation. CAUTION This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of FCC Rules.
Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus 15. This product is intended to be supplied by a Listed Power Supply Unit marked "Class 2" and rated from 24Vac, 50 or 60 Hz / 12Vdc, min. 0.35A Samsung Techwin cares for the environment at all product manufacturing stages to preserve the environment, and is taking a number of steps to provide customers with more environment-friendly products.
Contents INTRODUCTION 9 10 11 Features What’s included Component names and Functions 12 14 Installation Adjust the monitoring direction of the camera CONNECTION 15 15 16 Connecting to Monitor Connecting to Power Using coaxial communications SETUP 18 18 Menu Configration Menu Setup 34 Troubleshooting 3 Specifications 37 Dimension 9 INsTAllATION 12 15 18 TROUBLESHOOTING 34 SPECIFICATIONS 35 8_ Contents
⮈ FEATURES ᄔ high Resolution By adopting a diagonal 6mm (1/3”) 520,000 pixel (NTSC), 610,000 pixel (PAL) SONY CCD, the camera produces clear picture quality with a horizontal resolution of max 700 TV lines(665TVL±5%) for color ER mode and 700 TV lines for BW. excellent sensitivity The built-in high sensitivity COLOR CCD produces a clear image. y - Color : 0.1 Lux (50IRE, @F1.2), 0.0002LUX (SENS-UP, x512) - B/W : 0.01 Lux (50IRE, @F1.2), 0.
Introduction WDR By adopting a proprietary SV-V DSP chip, the camera delivers clear, high quality pictures even when the scene is backlight, by increasing exposure in dark areas while decreasing it in bright areas; a corrected image with clear details results. Vps(Virtual progressive scan) Adopting Samsung's unique development, the VPS(Virtual Progressive Scan) enhances the sharpness of moving subject's outline.
COMPONENT NAMES AND FUNCTIONS 2 4 ➌ ● INTRODUCTION ❶ ಲ y y ➐ ➏ 5 T OU N) D_ _D ) (M (EXT ND D (G RE HITE K W AC BL ⓬ ⓫ ❿ ➒ ➑ 2 shield Case ❶ Dome Cover ➌ Pan Base : control panning angle of camera 4 2.8 Vari-focal Lens Module 3 ~ 8.5 mm (F1.2) 5 Function Setup Switch : Display the OSD menu and move the cursor up, down, left, and right amend or confirm changes. When menu is off, move this switch left(NEAR) or right(FAR) for adjusting focus.
Installation BEFORE INSTALLATION Before installing your camera, you have to read the following cautions ： • You have to check whether the location (ceiling or wall) can bear five times the weight of your camera. • Don’t let the cable to be caught in improper place or the electric line cover to be damaged. Otherwise it may cause a breakdown or fire. • Before installing your camera, you have to adjust the lens focus, zoom, and switch settings.
2. Hold the ceiling bracket (located where the arrow points to) and separate it from the main body of the camera by rotating it anti-clockwise. 3. Place the separated ceiling bracket so that the “Front” side faces the area to be monitored and install it with the M4 tapping screws. tapping screw tapping screw ＊ If you want to install the camera with the ceiling bracket combined, fix it using two tapping screws at the side of the main body 4.
Installation Adjusting the monitoring direction for the camera Pan Tilt Lens rotation Adjusting the monitoring direction You can adjust the camera direction only when the camera is fixed on the ceiling. Where, rotating the camera unit to the left or right is called Pan, adjusting the tilt is called Tilt, and turning the lens on its axis is called Rotation. - The effective range of pan is a total of 352 degrees. - The effective range of rotation is a total of 348 degrees.
Connection CONNECTING TO MONITOR ಲ Connect the Video OUT port on the rear panel of the camera to a monitor. ㎫ ● CONNECTION Monitor Camera As the connecting method varies with the instruments, refer to the manual supplied with the instrument. Only connect the cable when the power is turned off. y CONNECTING TO POWER Since power specifications differ depending on the model, make sure to check your model name and specifications before connecting power.
Connection Be sure to connect power only after all the installation is complete. Note that AC / DC adaptor is not supplied with camera. Ground should be connected to the GND terminal. Using coaxial communications • Coaxial Communications System • OSD Control method • If you set the sensitivity level of the sub menu item (of COAX) to “Low”, you have to press the MENU/ENTER (OSD KEY) button twice in a row to access the OSD menu.
- Video Cable The camera's video output port is connected to the monitor with a BNC coaxial cable, shown below : If the distance between the camera and the monitor exceeds the recommended maximum, please use an auxiliary video amp. Recommended Cable Specification 300m 3C2V(RG-59/U) 450m 5C2V(RG-6/U) 600m 7C2V(RG-11/U) It is recommended that pure copper coax cable is used and not copper coated steel, as this will cause issues with the communication over the coaxial cable.
Setup MENU CONFIGRATION MAIN SETUP LENS ● DC EXPOSURE ● BRIGHTNESS ● SENS-UP ● SHUTTER ● RETURN ● AGC SSDR ● OFF ● ON WHITE BAL ● ATW ● MANUAL ● OUTDOOR ● AWC→SET ● INDOOR BACKLIGHT ● OFF ● WDR ● USER BLC ● HLC SSNR3 ● ON ● OFF DAY/NIGHT ● AUTO ● B/W ● EXTERN ● COLOR SPECIAL ● IMAGE ADJ ● INTELLIGENCE ● PROFILE ● CAM TITLE ● PRIVACY ● COAX ● SYNC ● DIS ● RETURN EXIT ● SAVE ● NOT SAVE ● RESET meNU seTUp Use the Function Setup switch within the camera.
㔤 Select the function using the Function Setup switch. ܓ DC Change the status using the Function Setup switch. OFF ATW OFF ON AUTO ● SETUP MAIN SETUP 䯝 1.LENS 2.EXPOSURE 3.SSDR 4.WHITE BAL 5.BACKLIGHT 6.SSNR3 7.DAY/NIGHT 8.SPECIAL 9.EXIT SAVE 2. Select a desired function using the Function Setup switch. y Place the cursor over a desired item. 3. Set up a selected item by using the Function Setup switch. 4. To finish the setting, select ‘EXIT’ and press the Function Setup switch.
Setup - SIMPLE FOCUS : Select this to fit the focus automatically. - AFTER D/N : After D or N is switched, select whether to use the focus readjustment function. - RETURN : Select this to save the changes in the FOCUS ADJ menu and return to the DC LENS menu. y RETURN : Select this to save the changes in the DC LENS menu and return to the SETUP menu. EXPOSURE 1. When the SETUP menu screen is displayed, select EXPOSURE by using the Function Setup switch so that the arrow indicates 'EXPOSURE'. 2.
y AGC(AUTO GAIN CONTROL) : The higher the gain level, the brighter the screen - but the greater the noise. - HIGH : Allows automatic gain control from 5.3dB to 42dB. - OFF : Deactivates the AGC function. - LOW : Allows automatic gain control from 5.3dB to 32dB. y RETURN : Return to the SETUP menu. If you press the Function Setup switch in ‘AUTO’ mode, You can adjust brightness by adjusting the SENS-UP level.
Setup WHITE BAL (WHITE BALANCE) Use the White Balance function to adjust the screen color. 1. When the SETUP menu screen is displayed, select ‘White Bal’ by using the Function Setup switch so that the arrow indicates ‘White Bal’. 2. Select a desired mode using the Function Setup switch. ※ Select one of the following 5 modes, as appropriate for your purpose. y ATW : Select this when the color temperature is between 2,400˚K and 10,500˚K.
BACKLIGHT ● SETUP The camea is designed so that it delivers a distinctive subject and background at the same time, even when the subject is in backlight, by adopting a function of the proprietary SV-V DSP chip. 1. When the SETUP menu screen is displayed, select ‘BACKLIGHT’ by using the Function Setup button. so that the arrow indicates ‘BACKLIGHT’. 2. Select a desired mode using the Function Setup button depending on the camera purpose.
Setup WDR ON WDR OFF M Because there can be a difference in the effectiveness of HLC according to the amount of light area in the screen, optimize the installation angle for the best HLC performance. In a dark environment, the HLC is only activated when a high light that is larger than a certain area is present. The HLC is not activated in day light or when bright light is not present at night. (In NIGHT ONLY mode).
DAY/ NIGHT You can display pictures in color or black and white. 1. When the SETUP menu screen is displayed, select ‘DAY/NIGHT’ by using the Up and Down buttons so that the arrow indicates ‘DAY/NIGHT’. - BURST MODE : You can turn on or off the burst signal on B/W mode. - DURATION : You can select the brightness level at which the camera switches from day to night mode. - DWELL TIME : You can select the duration time about changing the day/night mode.
Setup SPECIAL 1. When the SETUP menu screen is displayed, select ‘SPECIAL’ by using the Function Setup switch so that the arrow indicates ‘SPECIAL’. 2. Select a desired mode using the Function Setup SPECIAL switch. #䯝 1.IMAGE ADJ 2.CAM TITLE 3.SYNC 4.INTELLIGENCE 5.PRIVACY 6.DIS 7.PROFILE 8.COAX 9.RETURN ImAGe ADJ : 1) When the SPECIAL menu screen is displayed, select ‘IMAGE ADJ’ by using the Function Setup switch so that the arrow indicates ’IMAGE ADJ‘.
- D-ZOOM : You can use a digital zoom of x1 ~ x16. ● SETUP - VPS(Virtual Progressive Scan) : This is an advanced technology that reproduces a sharp progressive image. This is appropriate to high quality recording and file transfer via the Internet. • OFF : Selects 2:1 Interlaced Scan as the Imaging Method. • ON : Selects Progressive Scan as the Imaging Method. - REVERSE : You can reverse the picture. • OFF : You don’t reverse the picture. • H-REV : You can flip the picture horizontally on the screen.
Setup y CAM TITLE : If you enter a title, the title will appear on the monitor. CAMERA TITLE SETUP 2) Set it to ‘ON’ by using the Function Setup button. A B C N O P a b c n o p - . 0 ←→ 3) Press the set button. _______________ 1) If the SPECIAL menu screen is displayed, use the Function Setup button so that the arrow indicates ‘CAM TITLE’.
y INTELLIGENCE : Commands the camera to motion-detect and trace an object. - MOTION : Select motion types to detect. • DETECTION : Since the camera detects motion without any additional external sensor, you can monitor activity more efficient. • TRACKING : Commands the camera to detect and trace a moving object. - FENCE : You can select up to 4 FENCE. - MODE : Determines whether to use the fence selected in the FENCE. - TYPE : Two types, line and area, of fences are available.
Setup 2) AREA FENCE - SEL POS : Selects a position from AREA FENCE POS1 ~ POS4. 1. SEL POS POS1 - X POS / Y POS : Adjust the size IIIIIIIIIIIIIIIIIIIII 12 2. X POS and position of the selected area IIIIIIIIIIIIIIIIIIIIIIIII 1 3. Y POS fence. 4. DIRECTION IN - DIRECTION 5. RETURN y IN : Detects objects entering the fenced area. y OUT : Detects objects exiting the fenced area y IN/OUT : Detects all objects entering and exiting the fenced area. - RETURN : Return to the TRACKING menu.
• RETURN : Select this to save the MASK AREA menu settings and return to the INTELLIGENCE menu. - SENSITIVITY : Set the sensitivity of the motion detection. When you adjust the lower level, the more sensitive. - RETURN : Return to the SPECIAL menu. y PRIVACY : Mask an area you want to hide on the screen. 1) When the SPECIAL menu screen is PRIVACY AREA SETUP displayed, press the set button so that 䯝 1. AREA AREA1 the arrow indicates ‘PRIVACY’. 2. MODE OFF 2) Set up the mode using the Function 3.
⥂ Setup y PROFILE : Select a desired mode using the Function Setup switch according to the picture display - BASIC : The most common environment is set to meet. - DAY/NIGHT : It will be set automatically so it optimizes to the day or night conditions, respectively. - BACKLIGHT : It will be set automatically SPECIAL 1.IMAGE ADJ 2.CAM TITLE 3.SYNC 4.INTELLIGENCE 5.PRIVACY 6.DIS #䯝 7.PROFILE 8.COAX 9.
y COAX : You can select whether to use COAX communication. If you use the COAX communication, you prevent malfunctions by selecting low sensitivity levels against noise. COAX SENSITIVITY 䯝 1.SENSITIVITY 2. RETURN LOW ● SETUP y RETURN : Return to the MAIN SETUP menu. EXIT Select a desired EXIT mode using the Function Setup button depending on the camera purpose. y SAVE : Save the current settings and exit the MAIN SETUP menu. y NOT SAVE : Do not save the current settings and exit the MAIN SETUP menu.
Troubleshooting TROUBLESHOOTING If you have trouble operating your camera, refer to the following table. If the guidelines do not enable you to solve the problem, contact an authorized technician. PROBLEM SOLUTION Nothing appears on the screen. ▶ Check that the power cord and line connection between the camera and monitor are fixed properly. ▶ Check that you have properly connected VIDEO cable to the camera VIDEO output jack. The image on the screen is dim.
Specifications މ SPECIFICATIONS sCD-3083N sCD-3083p VIDeO 1/3’’ Super HAD CCD II Total pixels 1028(H) x 508(V) 1028(H) x 596(V) effective pixels 976(H) x 494(V) 976(H) x 582(V) scanning system 2 : 1 Interlace / Progressive ● SPECIFICATIONS Imaging Device synchronization Internal / Line Lock frequency H:15.734KHz / V:59.94Hz Horizontal Resolution Color : ER mode Max 700TV lines(665 TVL ± 5%), B/W : 700TV lines min. Illumination H:15.625KHz / V:50Hz COLOR : 0.1 Lux (50IRE, @F1.2), 0.
Specifications SCD-3083N Day & Night SCD-3083P Auto (ICR) / EXTERNAL/ Color / B/W Backlight Compensation Off/ USER BLC / HLC / WDR Wide Dynamic Range 128x 160x Dynamic Range (SSDR) Off / On Digital Noise Reduction (SSNR Ⅲ ) Off / On Digital Image Stabilization Off / On Privacy Masking Off / On (12 Programmable zones, Polygonal type) Sens-up (Frame Integration) 2x ~ 512x Gain Control Off/ Low / High White Balance ATW / Outdoor / Indoor / Manual / AWC (1,700K° ~ 11,000K°) Electronic Shutter Sp
DIMENSION Unit: mm ● SPECIFICATIONS Ø115.8 92.
SALES NETWORK SAMSUNG TECHWIN CO., LTD. Samsungtechwin R&D Center, 701, Sampyeong-dong, Bundang-gu, Seongnam-si, Gyeonggi-do, Korea, 463-400 TEL : +82-70-7147-8740~60, FAX : +82-31-8018-3745 SAMSUNG TECHWIN AMERICA Inc. 100 Challenger Rd. Suite 700 Ridgefield Park, NJ 07660 Toll Free : +1-877-213-1222 Direct : +1-201-325-6920 Fax : +1-201-373-0124 www.samsungcctvusa.com www.samsungtechwin.com www.samsungsecurity.com SAMSUNG TECHWIN EUROPE LTD.
