Security Camera User Manual

ManualsBrandsSamsung ManualsSecurity CameraSCC-C6403

Part : AB68-00570A(00)

SmartDome Camera

SCC-C6403

Owner’s Instructions

Manuel d’instruction

Manual del usuario

00570A-SCC-C6403-ENG 8/17/06 1:51 PM Page 1

Summary of content (29 pages)

PAGE 1
00570A-SCC-C6403-ENG 8/17/06 1:51 PM Page 1 SmartDome Camera SCC-C6403 Owner’s Instructions Manuel d’instruction Manual del usuario E F Es J Part : AB68-00570A(00)
PAGE 2
00570A-SCC-C6403-ENG 8/17/06 1:51 PM Page 3 Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings, Install in accordance with the manufacturer's instructions. 8. Do not install near any heat sources such as radiators, heat registers, or other apparatus (including amplifiers) that produce heat. 9.
PAGE 3
00570A-SCC-C6403-ENG 8/17/06 1:51 PM Page 5 6. Do not place conductive objects (e.g., screwdrivers, coins, and metal things) or containers filled with water on top of the camera. (Doing so may cause personal injury due to fire, electrical shock, or falling objects.) FCC STATEMENT 7. Do not install the unit in humid, dusty, or sooty locations. (Doing so may cause fire or electrical shock.) This device complies with Part 15 of the FCC Rules. Operation is subject to 8.
PAGE 4
00570A-SCC-C6403-ENG 8/17/06 1:51 PM Page 1-1 Before Usage This is a basic instruction manual for the SCC-C6403 user. It contains all the instructions needed to use the SCC-C6403 from a simple introduction of the control locations and functions of the SCC-C6403 to installation methods in the set up menu. We recommend all users of the SCC-C6403 from the advanced user who has used similar cameras before to the general user to read the instruction manual before using.
PAGE 5
00570A-SCC-C6403-ENG 8/17/06 1:51 PM Page 1-3 4. ZONE SET...............................................................................................3-19 - ZONE DIR SET....................................................................................3-19 - ZONE AREA SET ................................................................................3-20 - LOCATION .......................................................................................3-21 - ZONE ID SET ...............................
PAGE 6
00570A-SCC-C6403-ENG 8/17/06 1:51 PM Page 1-5 SCC-C6403 Introduction Locations of Control SCC-C6403 is a zoom lens built in smart dome camera which provides you with the best monitoring function in connection with CCTV at banks or companies. FRONT E The SCC-C6403 is a high quality surveillance camera using x32 zoom lens and digital zoom IC, it can catch clear images up to 320 times.
PAGE 7
00570A-SCC-C6403-ENG 8/17/06 1:51 PM Page 1-7 ADAPTER CONNECTION BACK SCC-C6403 Adapter BOARD E AC 24V OUT POWER AC 24V OUT POWER 1-7 1-8
PAGE 8
00570A-SCC-C6403-ENG 8/17/06 1:51 PM Page 1-9 INITIAL SETTING Setting RS-422A/RS-485 termination CAMERA ADDRESS SETUP Use SW701, SW702, or SW703 for Camera Address setup. You may allocate up to 255 addresses by using SW701 to set the 3rd digit, SW702 the 2nd digit, and SW703 the 1st digit. EX) In case of Camera Address 1, see the following figure for setup. SW701 SW703 SW702 Setting communication Protocol Use number 1~4 PIN of SW704 to set communication Protocol.
PAGE 9
00570A-SCC-C6403-ENG 8/17/06 1:51 PM Page 2-1 Before Installing Checking Package Contents Chapter 2 SCC-C6403 Installation Please check that all components listed below are included in the package: E In this chapter, we will check the contents of the package before installing the SCC-C6403, and prepare a power adapter suitable for the power supply system. (Power Consumption: 18W; Voltage: AC24V, 1.5A) Then, we will install the SCC-C6403 and connect the cables.
PAGE 10
00570A-SCC-C6403-ENG 8/17/06 1:51 PM Page 2-3 Preparing the Cables Cable Connection Power Adapter Cable 1. First, connect one end of the BNC video cable connector to the Video Output Terminal (VIDEO OUT) The cable that plugs into the SCC-C6403 power input receptacle has the rated voltage of AC24V, 1.5A. Check the rated voltage before using the cable. 2. Then, connect the other end of the connector to the Video Input Terminal of the monitor.
PAGE 11
00570A-SCC-C6403-ENG 8/17/06 1:51 PM Page 2-5 Installing SCC-C6403 Installation Precautions 1) Make sure that the installation site can sufficiently support a minimum of four times the net weight of the SCC-C6403 SmartDome Camera and other accessories. 2) Install in an area where the space above the ceiling board is over 18 cm (7 in.) high. 3) Use the supplied screws to fasten the camera to the bracket assembly. 4) Keep persons away from the installation area, as there is a risk of falling objects.
PAGE 12
00570A-SCC-C6403-ENG 8/17/06 1:51 PM Page 2-7 Installing the Camera 5) CEILING MOUNT ADAPTOR (SADT-100CM) This adaptor is used for installing the indoor housing or the outdoor housing for the SmartDome Camera to a concrete ceiling. 1. [Figure 1] Install the structure on the ceiling. (Refer to Installation reference for the Length of the structure) * Built in by the builder of the structure E [Figure 1] 2. Make a hole in the ceiling where the camera will be installed.
PAGE 13
00570A-SCC-C6403-ENG 8/17/06 1:51 PM Page 2-9 5. [Figure 5] Match the BRKT-ANCHOR and CAMERA ADAPTER and use 4screws (PH M4 x 8) to assemble them. 6. Pull the safety wire from the case body, and assembly it to the camera holder. Chapter 3 Setup Menu Overview [Figure 5] [Figure 6] In this chapter, we will look over the Setup Menu of the SCC-C6403, First we'll look over the overall structure of the Setup Menu, and then we'll look at the functions of each menu. 7.
PAGE 14
00570A-SCC-C6403-ENG 8/17/06 1:51 PM Page 3-2 Structure of the Setup Menu ALARM SET CAMERA SET CAMERA ID V-SYNC COLOR/BW MOTION DET ZOOM SPEED DIGITAL ZOOM DISPLAY ZOOM DISPLAY P/T EXIT ON.../OFF INT/LINE... COLOR.../BW.../AUTO... OFF/ON... 1/2/3/4 0FF/X2 ~ X10 OFF/ON OFF/ON QUIT/SAVE/PRESET IRIS SHUTTER AGC/MOTION EXIT ALC.../MANU... OFF/1/100(1/120)~1/10K/AUTOX2...~X128... OFF/LOW/HIGH(AGC) S.SLOW/SLOW/NORM/FAST/F.FAST(MOTION) ATW1/ATW2/AWC/MANU... ON/OFF ONEAF/MF ...
PAGE 15
00570A-SCC-C6403-ENG 8/17/06 1:51 PM Page 3-4 ❈ If the power is turned off after PRESET, AUTO PAN, SCAN, PATTERN function is activated and no other control is made, camera will do the same function after the power is turned on. Use the controller to press the MENU selection key and the following screen will be displayed. ** MAIN MENU ** CAMERA SET... VIDEO SET... PRESET ... ZONE SET... AUTO SET... ALARM SET... OTHER SET... SYSTEM INFO...
PAGE 16
00570A-SCC-C6403-ENG 8/17/06 1:51 PM Page 3-6 COLOR/BW In the COLOR/BW menu, you can switch ON or OFF the IR (infrared) Filter. In a poor illumination environment, the IR filter is turned off in the BW mode the its sensitivity increases as high as a black and white camera. On the other hand, the IR filter is turned on and the sensitivity decreases in the COLOR mode. COLOR : The IR Filter is ON and the screen is normal. You can press the [Enter] key to set the COLOR GAIN LEVEL.
PAGE 17
00570A-SCC-C6403-ENG 8/17/06 1:51 PM Page 3-8 Select ON and press [Enter ] to display an additional menu window of “MOTION DET ”. You can select one from the sub items of TOP..., BOTTOM..., LEFT..., RIGHT..., CENTER... or USER... as AREA where the Motion Detection function is applied.Select one from TOP..., BOTTOM..., LEFT..., RIGHT..., CENTER... or USER... and press [Enter ]. You ’ll see the factory defaults of that item and Motion Detection will be applied to the area you selected.
PAGE 18
00570A-SCC-C6403-ENG 8/17/06 1:51 PM Page 3-10 EXIT The EXIT menu is used to quit the CAMERA SET menu of the SCC-C6403 and return to the MAIN MENU. - QUIT : Ignores the changed information and restores the saved information. - SAVE : Saves the information of the setting condition of the menu. - PRESET : Ignores the changed information and restores the initial factory defaults of the menu.
PAGE 19
00570A-SCC-C6403-ENG 8/17/06 1:51 PM Page 3-12 SHUTTER AGC You may designate both the fast electronic shutter speed and low electronic shutter speed in the SHUTTER menu. The fast electronic shutter supports 7 shutter speeds from 1/100(1/120) to 1/10K second to be used for the bright and fast video image.
PAGE 20
00570A-SCC-C6403-ENG 8/17/06 1:51 PM Page 3-14 WHITE BAL You can select one of four modes for white balance adjustment as follows: Lights are generally denoted as color temperatures and expressed in Kelvin (K) units. The general light color temperatures are shown below. - ATW1/ATW2(Auto-Tracing White Balance Mode): In these modes, the color temperature is monitored continuously and thereby white balance is set automatically.
PAGE 21
00570A-SCC-C6403-ENG 8/17/06 1:51 PM Page 3-16 FOCUS MODE EXIT In the FOCUS MODE MENU, the Focus method can be set to ONEAF (One Auto Focus), or MF(Manual Focus). - ONEAF : In the ONEAF mode, it automatically sets the focus after the PAN/TILT/ZOOM moves, and operates as the same in the MF mode if the PAN/TILT/ZOOM does not move. - MF : In MANUAL FOCUS MODE the user adjusts the Focus manually. Use the left/right keys to select ONEAF orMF in the FOCUS MODE menu.
PAGE 22
00570A-SCC-C6403-ENG 8/17/06 1:51 PM Page 3-18 POSITION SET 4. ZONE SET From "POSITION SET..." press [ENTER] to get into the PAN/TILT, FOCUS/ZOOM SET screen to set the PAN/TILT location and FOCUS/ZOOM condition then press [ENTER] to return to a higher menu. The ZONE SET menu includes the setup of ZONE DIRECTION, and ZONE AREA. PRESET ID This is the ID set up function for each PRESET. It can be set up to 12 characters using the left, right, up, and down keys.
PAGE 23
00570A-SCC-C6403-ENG 8/17/06 1:51 PM Page 3-20 ZONE AREA LOCATION Press [ENTER] to enter the ZONE AREA MAP screen from “ZONE The “LOCATION...” menu designates the left/right LIMIT positions of ZONE AREA. Enter the setup screen to move PAN, then select a start position and press [ENTER]. Move PAN again to select a end position and press [ENTER]. Now, ZONE AREA setup is complete. AREA SET...”. Select a ZONE AREA number from the ZONE AREA MAP screen and press [ENTER] to enter the ZONE AREA setup screen.
PAGE 24
00570A-SCC-C6403-ENG 8/17/06 1:51 PM Page 3-22 5. AUTO SET SPEED The AUTO SET menu includes AUTO PAN, PATTERN, and SCAN and it is able to set up the AUTO PLAY motion. This is a setting function for movement speed setup. It can be set from STEP1 to STEP64. DWELL TIME AUTO PAN This is a function for setting up the time to stay in the START to END position. After selecting the locations of two points (PAN/TILT) of START and END, it loops continuously in the set up SPEED.
PAGE 25
00570A-SCC-C6403-ENG 8/17/06 1:51 PM ** MAIN MENU ** CAMERA SET... VIDEO SET... PRESET... ZONE SET... AUTO SET... ALARM SET... OTHER SET... SYSTEM INFO... Page 3-24 AUTO PLAY (AUTO SET) AUTO PAN PATTERN SCAN AUTO PLAY ➜ Press [Enter] 1... 1... 1... ... ➜ Press [Enter] RET ➜ PATTERN SET 1 SET START POSITION AND ENTER AUTO PLAY executes SCAN, AUTO PAN, PATTERN, and PRESET when there is no camera action after AUTO RETURN finishes.
PAGE 26
00570A-SCC-C6403-ENG 8/17/06 1:51 PM Page 3-26 AUTO SET 6. ALARM SET It consists of 4 ALARM INPUTs and 3 ALARM OUTs.It can sense an ALARM input from exterior SENSORs and it performs with PRESET or PATTERN function and outputs the ALARM OUT signals. Alarm operation time depends on the Preset Dwell time corresponding to the alarm and whether AUTO is involved. ** MAIN MENU ** CAMERA SET... VIDEO SET... PRESET... ZONE SET... AUTO SET... ALARM SET... OTHER SET... SYSTEM INFO...
PAGE 27
00570A-SCC-C6403-ENG 8/17/06 1:51 PM Page 3-28 TURBO P/T This function doubles up the speed of PAN/TILT movement by manual operation of PAN/TILT. The speed may go up to 180°/sec(PAN). AUTO CAL This function turns on or off Auto Calibration. SCC-C6403 has the Auto Calibration function to improve the precision of LENS and PAN/TILT motor. You may set to OFF/6H/12H/18H/24H. Without user’s key input for the time designated by the user, A.C will appear on the screen while initializing LENS and PAN/TILT.
PAGE 28
00570A-SCC-C6403-ENG 8/17/06 1:51 PM Page 3-30 9. SHORT KEYS SSC-1000 or SSC-2000 Controller supports the following short keys. Function Key ❈ SCC-C6403 has two FANs inside for preventing overheating.
PAGE 29
00570A-SCC-C6403-ENG 8/17/06 1:51 PM Page 3-32 Product specifications Cautions SCC-C6403 NO Items 1 Product Type 2 Power Input 3 4 Power Consumption Contents Remark - Zoom lens single body SmartDome CAMERA • The copyright of the manual belongs to Samsung Electronics Co., Ltd. - AC 24 ± 10% (50Hz ± 0.3Hz) • Without the permission of Samsung Electronics it cannot be reproduced electronically, mechanically, audibly, or by any other method.