220X POWER ZOOM WDR CAMERA SCC-C4205(P)/C4305(P) Owner’s Instructions Gebrauchsanleitung Guide d’utilisation Guía del usuario Istruzioni per l’uso 220x Pow DA er Zoom DIGIT Y NIG HT AL CO LOR CAM ERA Part : AB68-00509B(02) Printed in China ✽ Be sure to read the "Safety Precautions" in this manual to ensure correct use and operation of this product.
Important Safety Instructions 1. 2. 3. 4. 5. 6. 7. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings, Install in accordance with the manufacturer's instructions. 8. Do not install near any heat sources such as radiators, heat registers, or other apparatus (including amplifiers) that produce heat. 9.
4. Securely plug the power cord into the power receptacle. (A loose connection may result in fire.) 5. When mounting the camera on a wall or ceiling, fasten it safely and securely. (A falling camera may cause personal injury.) 6. Do not place conductive objects (e.g., screwdrivers, coins, and metal things) or containers filled with water on top of the camera. (Serious injury may result from fire, electrical shock, or falling objects.) 7. Do not install the unit in humid, dusty, or sooty locations.
FCC Statement Contents This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. 1. Overview.............................................................7 Note: 3. Installation ......................................................
1 Overview 2 Part Names and Functions This is a state-of-art WDR zoom camera which employed the x22 zoom lens and digital zoom IC to monitor up to 22 times as large as an original image. SCC-C4205(P)/C4305(P) has the following functions. ● E WDR for distinct photographing of both bright and dark parts of an image. 220x Power Zoom LOW LIGHT ● ● Low - Light Surveillance function that enables image capture even under extremely low light conditions.
✔ In Setup Menu Mode - UP/ DOWN buttons: Use to move the cursor up or down. - LEFT/ RIGHT buttons: Use to move the cursor left or right, or to sequentially view the values that can be assigned to a parameter. - ENTER button: Use to select a Sub Menu item, and to accept the current value. ZOOM/ FOCUS REMOTE terminals This port is used for ZOOM/FOCUS, MENU CONTROL, HOME RETURN, and AF by using an external controller. Depending on the input condition, 4 modes, A, B, C, and D are available.
3 Installation Preparing the Cables To install and use the camera, first prepare the following cables. Before Installation The requirements for the power adapter, which connects to the camera's POWER IN terminal, are as follows: Checking the Package Contents ● Make sure that the following accessories are included in the package.
Connecting the Cables 1. Connect one end of the BNC cable to the VIDEO OUT. 2. Connect the other end of the BNC cable to the VIDEO IN of the monitor. 4. Determine the type of power supply and set the POWER SELECTION switch accordingly. Next, plug the power adapter into a wall outlet. The requirements for the power adapter for each model are as follows: ● ● Video terminals on the back of the monitor E SCC-C4205(P) : DC12V 600mA SCC-C4305(P) : AC24V 300mA DC12V 600mA 5.
4 Navigating the Setup Menu In this chapter, we will take a look at the menu system of the SCC-C4205(P),C4305(P). First, we will take a look at the structure of the Setup Menu and then describe the functions of each menu item in the menu. Structure of the Setup Menu ● ● Structure of the Setup Menu of the SCC-C4305(P) CAMERA ID OFF/ON... IRIS ALC.../WDR...
✔ WDR ❙ CAMERA ID In the CAMERA ID menu, you may designate the CAMERA ID to be displayed in the monitor connected to a camera. Set the CAMERA ID menu to ON... and press [ENTER] and the CAMERA ID setup submenu will appear. The CAMERA ID may be created by up to 20 digits by using alphabets, numbers, and some special texts served by the submenu screen. You may locate the designated CAMERA ID on your own by using the LOCATION... submenu.
❙ SHUTTER In the SHUTTER menu, you may determine the fast electronic shutter speed or slow AUTO shutter speed. The fast electronic shutter supports 7 speeds from 1/100(1/120) sec. to 1/10K sec. to photograph a bright and quick moving image. The slow AUTO shutter supports about 10 speed from x2 to x160 to make an image projected to the screen more distinct and brighter by selecting the slow shutter speed.
❙ WHITE BAL You can select one of four modes for white balance adjustment as follows: - ATW1/ATW2(Auto-Tracing White Balance Mode): In these modes, the color temperature is monitored continuously and thereby white balance is set automatically. The following are the approximate supported color temperature ranges in these modes. ATW1 : 2500K ~ 9300K(✻1) ATW2 : 2000K ~ 10000K(Mode recommended for sodium lighting)(✻2) ✻ 1.
CAMERA ID IRIS SHUTTER AGC WHITE BAL FOCUS MODE MOTION DET COLOR/BW PRIVACY SPECIAL PRESET EXIT OFF ALC... OFF LOW ATW1 AF ON... COLOR ... ... ... QUIT ❙ COLOR / BW (MOTION DET) COLOR/BW turns IR(Infrared) Filter on or off. In the poor illumination environment, turns IR Filter off to raise the sensitivity to the same level as an black-and-white camera while in the good illumination environment, turns it on to convert to the COLOR mode in the normal screen condition to lower the sensitivity.
✔ AUTO... Depending on illumination, it is automatically switched to the COLOR or BW mode. In the poor illumination environment, turns IR Filter off to convert to the Black-andWhite mode for better sensitivity and in the good illumination environment, turns it on to convert to the COLOR mode for worse sensitivity. Select AUTO and press [Enter] and the AUTO BW submenu will appear to control the BW level. Depending on ON or OFF, the BURST signal may output or no.
✔ PRIVACY NO. 0 Press the ENTER button. POSITION SET SIZE LOCATION ON... … … EXIT QUIT ✔ CTRL TYPE : By inputting the wire remote port, you may set up the mode, A, B, C, or D. Item Code You shall set up the position of ZOOM/FOCUS in the PRIVACY ZONE area from the POSITION SET menu. Press UP/DOWN/LEFT/RIGHT key to size the PRIVACY ZONE area from the SIZE menu. Press UP/DOWN/LEFT/RIGHT key to locate the PRIVACY ZONE area from the LOCATION menu.
✔ RS-485 : Sets up RS-485 Communication Protocol, Address, and Baud Rate. Select the PRESET menu and press [ENTER] and the PRESET MAP submenu screen will appear. (RS-485) (SPECIAL) LANGUAGE CTRL TYPE POSI/NEGA D-ZOOM DIS DIGITAL ZOOM REVERSE RS-485 DETAIL V-SYNC RET ❙ PRESET ENGLISH A + 1 OFF OFF OFF OFF (1)-I-INT (PRESET MAP) Press the ENTER button.
❙ EXIT The EXIT menu is used to terminate the CAMERA SETUP menu. ✔ QUIT : Select to ignore any changes you have made and restore the previously saved settings. ✔ SAVE : Select to save the settings that have been changed so far. PRESET : Ignores any change and returns to the default of ✔ the CAMERA menu as set for the product delivery.
SCC-C4205P/C4305P Item Description Product Type Zoom Lens Built-in WDR Color Camera(PAL TYPE) Power Supply Voltage - SCC-C4205P : DC 12V±10% - SCC-C4305P : DC 12V±10% AC 24V±10% (50Hz±0.3Hz) Power Consumption Broadcast System Imaging Device Effective Pixe Scanning Method Line Frequency Synchronization Method - SCC-C4205P : 5.
Memo Memo E
