Vari-focal Anti-Vandal Dome Camera User’s Guide ENG SCC-B539X GER FRE SPA ITA TUR AB68-00649D(03)Eng.
Safety Precautions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE REAR COVER. NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL. This symbol indicates high voltage is present inside. It is dangerous to make any kind of contact with any inside part of this product. This symbol alerts you that important literature concerning operation and maintenance has been included with this product.
9. If this product fails to operate normally, contact the nearest service center. Never disassemble or modify this product in any way. (SAMSUNG is not liable for problems caused by unauthorized modifications or attempted repair.) 10. When cleaning, do not spray water directly onto parts of the product. Doing so may cause fire or electric shock. 1. 2. 3. 4. 5. 6. 7. Do not drop objects on the product or apply strong shock to it.
Important Safety Instructions 1. 2. 3. 4. 5. 6. 7. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, or other apparatus (including amplifiers) that produce heat. 9.
Contents Overview.............................................................................................. 6 ENG About this guide ............................................................................6 Product overview...........................................................................6 Main features .................................................................................6 Components...................................................................................
Overview ❚ About this guide ❚ Main features This user guide includes basic instructions for the product. It is recommended that all users read this guide before use.
❚ Components Checking components in the package Please check your camera and accessories are included in the package. Those components are as shown below: Image Test Monitor Cable Part name Standard ENG Camera User’s Guide Quantity Usage Plastic anchor HUD 5 4 (EA) Attach each piece to screw connection holes for strengthening connection ASSY screw machine BH M5 X L6.
Components of your camera Your camera has the following components: 3 1 2 5 4 7 6 6 7 8 Lens @ 9 0 ! # 1. Dome cover: Covers the inner cover, lens, and main body to protect them. 2. Cover screw: Use it to assemble or disassemble both dome cover and case. 3. Inner cover: Covers the main body to protect it. 4. Wing locker: Push a long thin screwdriver into its narrow spot and press it outward when you want to remove the inner cover. 5.
Installation ❚ Setting switches Setting function switches To set the available functions on your camera, adjust eight switches as shown below: 1. Switch 1 (LL): When this switch is set to OFF, the camera operates in the internal synchronization mode, while when it is 8 set to ON, the camera operates in the 7 line lock mode. 6 5 In the internal synchronization mode, the 4 camera always uses an inside crystal 3 oscillator for synchronization.
2. 3. 4. 5. Set the LL switch to ON while the AC power is connected. If any picture roll happens, you have to adjust the phase using the phase-control buttons. Press the INC or DEC button to increase or decrease the phase by one degree. Switch 2 (LSS): This sens-up mode accumulates the image fields in memory to reduce noise but increase the brightness and contrast rate.
❚ Connecting cables and changing the settings Before installing your camera, you have to adjust the lens focus, zoom, and switch settings. To connect cables BNC Cable ENG Monitor 1. Connect the BNC cable to the Video connector attached on your camera. 2. Connect the BNC cable to the Video Input on a monitor. 3. Connect the power adapter to the Power connector attached on your camera. When the monitor is turned on, the camera image appears. To adjust the lens focus, zoom, and function settings 1.
❚ Installing camera Before installation Before installing your camera, you have to read the following cautions: You have to check whether the location (ceiling or wall) can bear five times the weight of your camera. Don’t let the cable to be caught in improper place or the electric line cover to be damaged. Otherwise it may cause a breakdown or fire. You can use wall mount adaptor (SADT-102WM), and pole mount adaptor (SADT-100PM) for installing the camera on the wall or pipeline.
Installing on a pipe Before installation, you have to be familiar with the above cautions and fill in the holes that are not used for installation. To install your camera bottom on a pipe 3. Attach the Dome cover. (Screw the connection bolts tightly using the L-Wrench for waterproofing.) To change the SAMSUNG logo position, move the location of the connection rubber band as show below and rotate for assembly. (The rotation limit is 180 degree.) ENG 1.
To install the camera side on a pipe 1. Pull the power and video cables through the pipe connection hole on the camera side 1) Remove the side cover from the Case using a coin or minus (-) driver. (Rotate counterclockwise.) 2) Push the power and video cables stretched outside of the bottom hole into the Case. And pull them out from the side cover of the Case. 2. Attach the removed side cover to the bottom hole and rotate it clockwise using a coin or minus (-) driver. (Be sure to insert the O-ring (P22 T2.
Installing the camera on the ceiling Before installation, you have to be familiar with the above cautions and fill in the holes that are not used for installation. To install your camera bottom on a pipe In case of wiring after penetrating a hole on the installation site 1 Penetrate a wiring hole toward the pipe. (Recommended hole size: within 30mm diameter) 2 Attach the gasket on the bottom of the product as shown below. You have to correctly align the hole with the pipe hole.
Disassembling/assembling the Main body from the Case The holes that are not used should be tightly sealed up using the screws provided for waterproofing. To detach the Main body from the Case, follow the instructions below: 1. 1. Remove the Dome cover first. 2. Detach the Main body of the camera from the Case. 1) Make loose two screws by rotating counterclockwise. 2) Detach the Main body of the camera after unlocking by pulling the left and right levers in the arrow direction. 3.
❚ Adjusting the camera direction Panning When the camera is fixed on the ceiling, you can adjust the camera viewing angle. You can rotate your camera leftward or rightward (Panning), and can change the slope of your camera upward or downward (Tilting). Tilting ENG In case of panning, the rotation limit of your camera is set to 355 degree (100 degree clockwise and 255 degree counterclockwise). The rotation is stopped by the Stopper inside of the camera.
SCC-B539X 18 AB68-00649D(02)Eng.
Appendix A: Specifications for NTSC Standard Item Product type Power input Broadcast type Power consumption Image device Pixels Scanning mode Scanning line frequency Min. object illumination Signal output Lens PAN function TILT function Controls Operation temperature Operation humidity Size Weight ENG Synchronization mode Horizontal resolution Details CCTV color dome camera AC 24V ± 10% (60Hz ± 0.3 Hz), DC 12V +10%/-5% NTSC Standard System (525 Lines, 60 Fields) Approx. 1.
Appendix B: Specifications for PAL Standard Item Product type Power input Broadcast type Power consumption Image device Pixels Scanning mode Scanning line frequency Synchronization mode Horizontal resolution Min. object illumination Signal output Lens PAN function TILT function Controls Operation temperature Operation humidity Size Weight Details CCTV color dome camera AC 24V ± 10% (50Hz ± 0.3 Hz), DC 12V +10%/-5% PAL Standard System (625 Lines, 50 Fields) Approx. 1.
Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life.
AB68-00649D(02)Eng.
