Digital Color Dome Camera User’s Guide ENG SCC-B531x(B) FRE SPA JAP AB68-00647C(01)Eng.
EXPLANATION OF SAFETY RELATED SYMBOLS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN The lighting flash and Arrowhead within Triangle is a warning sign alerting you of dangerous voltage inside the product. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE REAR COVER. NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL. This symbol indicates high voltage is present inside. It is dangerous to make any kind of contact with any inside part of this product.
9. If this product fails to operate normally, contact the nearest service center. Never disassemble or modify this product in any way. (SAMSUNG is not liable for problems caused by unauthorized modifications or attempted repair.) 10. When cleaning, do not spray water directly onto parts of the product. Doing so may cause fire or electric shock. 1. 2. 3. 4. 5. 6. 7. 8. AB68-00647C(01)Eng.indd 3 Do not drop objects on the product or apply strong shock to it.
IMPORTANT SAFETY INSTRUCTIONS 1. 2. 3. 4. 5. 6. 7. 8. Read Instructions – All the safety and operating instructions should be read before the product is operated. Retain Instructions – The safety and operating instructions should be retained for future reference. Heed Warnings – All warnings on the product and in the operating instructions should be adhered to. Follow Instructions – All operating and use instructions should be followed.
connected to the product, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges.
17) Power Lines – An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.
Contents Overview ...................................................................................... 8 ENG About this guide ............................................................................8 Product overview...........................................................................8 Main features .................................................................................8 Components...................................................................................
Overview ❚ About this guide This user guide includes basic instructions for the product. It is recommended that all users read this guide before use. This guide is divided as follows: Chapter 1, “Overview,” introduces the user guide and product related information. (This chapter) Chapter 2, “Installation,” explains how to set and install the product. Appendix, “Specifications,” provides the specifications of the product.
Components of your camera Your camera has the following components: 1 2 Lens 5 4 6 7 ENG 3 1. Cover dome: Covers the lens and main body to protect them. 2. Main body: Includes a lens, a switch board, a PCB board, screws, and such. 3. Locker: Used to open or close the Cover dome. To open the cover dome, press the locker. 4. Tilt fixing screw: Using this screw, the slope of the lens can be adjusted and fixed. 5.
Installation ❚ Setting switches Setting function switches To set the available functions on your camera, adjust eight switches as shown below: DEC 8 7 6 5 4 3 2 1 INC No 1 2 3 4 5 6 Name LL LSS H-REV V-REV BLC AGC 7 D/N 8 AWB Brief description Line lock ON/OFF Sens-up or Low speed shutter ON/OFF Horizontal reverse ON/OFF Vertical reverse ON/OFF Backlight compensation ON/OFF Auto gain control ON/OFF Automatic switching between color and black & white ON/OFF Automatic white balance ON/OFF 1.
ENG 2. Switch 2 (LSS): This sens-up mode accumulates the image fields in memory to reduce noise but increase the brightness and contrast rate. When this switch is set to ON, the camera automatically switches to a maximum of 128 times of image acquisition speed to implement a clear picture for darker image. 3. Switch 3 (H-REV): When this switch is set to ON, the camera image is reversed horizontally. If you want to monitor your site using a mirror, you can use this feature to see the right image. 4.
❚ Connecting cables and setting switches To connect cables Monitor BNC Cable 1. Connect the BNC cable to the Video connector attached on your camera. 2. Connect the BNC cable to the Video Input on a monitor. 3. Connect the power adapter to the Power connector attached on your camera. When the monitor is turned on, the camera image appears. To check the camera view and set the switches 1. Remove the Cover dome.
❚ Installing camera Before installation Before installing your camera, you have to read the following cautions: You have to check whether the location (ceiling or wall) can bear five times the weight of your camera. Don’t let the cable to be caught in improper place or the electric line cover to be damaged. Otherwise it may cause a breakdown or fire. When installing your camera, don’t allow any person to approach the installation site. If you have any valuable things under the place, move them away.
4. When you install the Mount bracket on the ceiling, remove the Ceiling mount opener by pressing it hard to connect the line attached on your camera through the hole in the ceiling. Otherwise, you can use the empty space opposite to the CAMERA FRONT sign for line connection. 5. Now attach the Main body to the Mount bracket by rotating it in the LOCK direction after aligning the Lock releaser on the Main body with the wide groove around the CAMERA FRONT inlay. 6. Adjust the camera direction.
SCC-B531X ENG 15 AB68-00647C(01)Eng.
Appendix A: Specifications for NTSC Standard Item Product type Power input Broadcast type Power consumption Image device Details CCTV color dome camera AC 24V ± 10% (60Hz ± 0.3 Hz), DC 12V +10%/-5% NTSC Standard color system (525 Lines, 60 Fields) Approx. 1.
Item Details Product color Operation temperature Operation humidity Size Weight SCC-B531xN : White / SCC-B531xBN : Black -10°C to +50°C Up to 90% 102(Ø) x 78(H)mm 190g ENG Controls Line Lock (LL) Sens-up; Low Speed Shutter(LSS) Horizontal Reverse (H-REV) Vertical Reverse (V-REV) Backlight compensation (BLC) Auto gain control (AGC) Switching between color and B&W by day and night change (D/N) Automatic white balancing (AWB) Digital noise reduction (DNR) Dynamic CCD defect compensation 17 AB68-00647C(
Appendix B: Specifications for PAL Standard Item Product type Power input Broadcast type Power consumption Image device Details CCTV color dome camera AC 24V ± 10% (50Hz ± 0.3 Hz), DC 12V +10%/-5% PAL Standard color system (625 Lines, 50 Fields) Approx. 1.
Item Details Product color Operation temperature Operation humidity Size Weight SCC-B531xP : White / SCC-B531xBP : Black -10°C to +50°C Up to 90% 102(Ø) x 78(H)mm 190g ENG Controls Line Lock (LL) Sens-up; Low Speed Shutter(LSS) Horizontal Reverse (H-REV) Vertical Reverse (V-REV) Backlight compensation (BLC) Auto gain control (AGC) Switching between color and B&W by day and night change (D/N) Automatic white balancing (AWB) Digital noise reduction (DNR) Dynamic CCD defect compensation 19 AB68-00647C(
AB68-00647C(01)Eng.
