SCC-B1331(P) SCC-B1031P DIGITAL COLOR CAMERA user manual ENG FRC SPA-M JAP POR-B imagine the possibilities Thank you for purchasing this Samsung product. To receive more complete service, please register your product at www.samsungsecurity.
Safety information CAUT CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol indicates that dangerous voltage consisting a risk of electric shock is present within this unit. 1. D e 2. D h 3. If it 4. R d 5.
Safety information CAUTION 1. Do not drop objects on the product or apply strong blows to it. Keep away from a location subject to excessive vibration or magnetic interference. 2. Do not install in a location subject to high temperature (over 140°F), low temperature (below -14°F), or high humidity. Doing so may cause fire or electric shock. RTS 3. If you want to relocate the already installed product, be sure to turn off the power and then move or reinstall it. 4.
Important Safety Instructions WARNING 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, or other apparatus (including amplifiers) that produce heat. 9.
Contents Introduction Features PRODUCT & ACCESSORIES Part Names and Functions 6 7 8 Installation Connecting the Auto Iris Lens Connector Mounting the lens Connecting cables and checking operation 11 11 12 How to use OSD Menu es wide sult and 13 13 14 16 22 23 24 25 25 Specifications have y, or Specifications 26 th English – 5 ENG Using Icons in the Menu Main Menu Profile Camera Setup Intelligence Privacy zone Setup Other Set System Information Language
Introduction FEATURES ❖ High Resolution • This camera has realized high resolution of 600 lines using the top-notch full digital image processing and special algorithm technologies. ❖ Intelligent Motion Detection & Tracking • This is an intelligent function that automatically detects a motion of an object. You can set a virtual fence so it sounds an alert if an object passes / enters /exits the virtual fence or virtual area.
Introduction ❖ Product & Accessories and • Accessories • Main Product t ra ENG Camera Camera Holder(Mount) C Mount Adapter User’s Manual Auto Iris Lens Connector t English – 7
Introduction ❖R PART NAMES AND FUNCTIONS ❖ Side View Mount Adapter Fixing Grooves Auto Iris Lens Connector Camera Lens Auto Iris Lens Control Cable • Auto Iris Lens Connector This groove is used for screwing the mount adapter, a part of the bracket where the camera will be installed. • Auto Iris Lens Control Cable This cable transmits the power and signals from the camera for controlling the Auto Iris Lens.
Introduction ❖ Rear Panel n o p q r alled.
Introduction n Input/Output Connector CO CO This connector has input and output ports for, DAY/NIGHT switching, and alarm output signals. No. Function 1 ALARM OUT 2 GND 3 TRIGGER IN 4 SHUTTER (S0) 5 SHUTTER (S1) 6 SHUTTER (S2) 7 5V OUT Description Alarm out port for motion detection. (Open collector type) Grounding Port. Displays the current still image when it receives the Trigger signal. (Normal Open Type) This is a port for selecting an external high speed shutter mode.
Installation CONNECTING THE AUTO IRIS LENS CONNECTOR MOUNTING THE LENS When using the CS lens Mount the CS lens by rotating it clockwise as shown in the picture: CS lens CS 렌즈 ENG Connect each uncovered shutter control cables to the Auto Iris Lens Connector as the following When using the C lens Pin No.
Installation CONNECTING CABLES AND CHECKING OPERATION ① Connect one end of the BNC cable to the VIDEO OUT Port on the rear of the camera. ② Connect another end of the BNC cable to the VIDEO IN Port on the monitor. USI ③ Finally connect the power adapter to the camera. You can connect 2 lines of the power adapter to the camera using the Slot Head screwdriver as shown in the picture. (GND: cable with the white stripe line) • E B sa • R • R • 1. ALA 2. GNDRAM 3. TRIG OUT 5. SHU 4. SHU GER TTER IN 6.
How to use OSD Menu USING ICONS IN THE MENU wer • (EXIT) Exits the menu setting. Before you exits the menu setting, select SAVE to save your settings, or select QUIT to cancel. • (RET) Returns to the previous menu. • (HOME) MAIN MENU ÃÃMAIN MENUÃÃ PROFILE CAMERA SET INTELLIGENCE PRIVACY ZONE OTHER SET SYSTEM INFO LANGUAGE Returns to the main menu. • (SAVE) Used to save your settings of MASK AREA, PRIVACY ZONE and more.
How to use OSD Menu PROFILE ePROFILEf Pr M ÃSTANDARD ITS BACKLIGHT DAY/NIGHT GAMING CUSTOM WH D In the PROFILE menu, you can configure the following camera settings at once.
How to use OSD Menu CAMERA SET Menu Previous Menu STANDARD ITS BACKLIGHT GAMING DAY DAY/NIGHT DAY DAY - - - - ATW2 ATW1 ATW1 ATW1 RED 0 0 0 0 BLUE 0 0 0 0 2 2 2 2 Sub-menus WHITE BAL DAY MODE DETAIL ENG ❖ ITS It will be set automatically so you can easily check the traffic conditions. ❖ BACKLIGHT It will be set automatically so you can distinguish the object from the background in a severe backlighting scene.
How to use OSD Menu CAMERA SETUP ❖ CAMERA ID eCAMERA SETf CAMERA ID OFF IRIS ALC AGC VERY HIGH DNR MID SHUTTER OFF SENS-UP AUTO X4 FLICKERLESS OFF XDR MID DIS OFF d c WHITE BAL DIGITAL ZOOM DETAIL V-SYNC AGC COLOR SUP REVERSE POSI/NEGA PIP OFF [2] INT LOW OFF + OFF [OFF, ON] CAMERA ID ABCDEFGHIJKLMNOPQRSTUVWXYZ0 123456789 :?-+*()/ ② SPffeeSP LOCATION CAMERA-1.................. ........................... The CAMERA ID menu is used for you to assign a unique name to a camera.
How to use OSD Menu ELC The LEVEL menu is used to adjust the overall brightness, where “+” will increase the brightness and “–” will decrease it. ② If you set the BACKLIGHT option to BLC, you will see a menu where you can set the BLC area. LEVEL BACKLIGHT [00]----I---OFF you can set the desired BLC zone by defining the size and location. ② In similar to ALC setting, you can specify the BLC area.
How to use OSD Menu ❖ SHUTTER AGC USER LEVEL [OFF, AUTO 1/100(PAL:1/120), AUTO 1/250, AUTO 1/500, AUTO 1/1000, AUTO 1/2000, AUTO 1/4000, AUTO 1/10K , 1/100(PAL:1/120), 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10K , EXT] [16] In USER mode, you can break down the level in 16 steps from VERY LOW to VERY HIGH to your preference.
How to use OSD Menu UTO 0, d /120) r, ect. es ast e LC will er FF h d ON OFF ON 1/4000 OFF ON ON 1/10K ON ON ON Note : – If IRIS mode is set to ELC, the SHUTTER menu will be deactivated as you adjust the brightness using the electronic shutter. – If the SENS-UP function is set to AUTO, only items of OFF and AUTO are available in the SHUTTER menu. – If the FLICKERLESS function is set to ON, the SHUTTER menu will be deactivated.
How to use OSD Menu ❖ DIGITAL ZOOM ❖ REVERSE [ON/OFF] You can set the digital zoom factor and position. If you press the SETUP switch with the DIGITAL ZOOM function set to ON, you will see the appropriate screen. When the zoom factor and position are defined, the digital zoom function will operate. [OFF, H, V, H/V] ❖ POSI/NEGA [+, -] Output as it is or mirror the video brightness signal.
How to use OSD Menu Set the sensitivity of the motion detection. INTELLIGENCE r ❖ RESOLUTION eINTELLIGENCEf MOTION MASK AREA DISPLAY SENSITIVITY RESOLUTION ALARM OUT 1 OFF 2 3 4 ON [4] [5] n Y d. the You can set the motion detection and tracking in the INTELLIGENCE menu. ❖ MOTION [1~5] If setting it to high, the camera can detect even a trivial movement of the target. ❖ ALARM OUT If you set a desired menu item to ON, the camera will sound an alert if it detect the appropriate motion.
How to use OSD Menu PRIVACY ZONE SETUP ePRIVACY ZONEf 1 7 2 8 3 9 4 10 PRIVACY SET STYLE 5 11 ON MOSAIC1 The PRIVACY function will protect your privacy by screening the privacy area that you have specified during monitoring. You can specify up to 12 privacy zones. If you set the PRIVACY SET to ON, your PRIVACY ZONE settings will be applied. You can change the style to adjust the mosaic size and color of the PRIVACY ZONE.
How to use OSD Menu OTHER SET SYSTEM INFORMATION eOTHER SETf FACTORY DEFAULTS OSD COLOR eSYSTEM INFOf BW TYPE 3_BOX_WDR_N SERIAL NO. 000000000000000 CAMERA VER. 0.50_090101 T>, e ove. You can view the system information including, camera version ❖ FACTORY DEFAULTS All the settings will be restored to the factory default. LANGUAGE ❖ OSD COLOR [BW, R/G/B] ENG tion ur eLANGUAGEf You can set the OSD(On-screen Display) color to COLOR or B/W. ÃENGLISH FRANÇAIS ESPAÑOL 日文 INGLÊS a.
How to use OSD Menu S ❖ Initial Configuration Table SPE • Camera Configuration CAMERA ID OFF IRIS ALC AGC VERY HIGH DNR MID SHUTTER OFF FLICKERLESS OFF XDR MID DIGITAL ZOOM OFF DETAIL [2] AGC COLOR SUP MID REVERSE OFF POSI/NEGA + PIP OFF DIS OFF 24 – DIGITAL COLOR CAMERA
Specifications SPECIFICATIONS Items Sub-items SCC-B1331N Camera Type CCTV Camera (WDR & DAY/NIGHT) Device Image 1/3” Super-HAD IT CCD Total Pixels 811 x 508 Effective 768 x 494 System Scanning Min.
Specifications Items Lens Sub-items SCC-B1331N Lens Drive Type MANUAL/AI(VIDEO/DC) Mount Type CS/C Input N/A Output 1 Output Coaxitron (Data On Coax cable) Yes (with SCX-RD100) Alarm Remote Control Environmental Conditions Power Operating Temperature Less than 90% Power Requirement AC24V ± 10%(60Hz ± 0.3Hz) DC12V ± 10% Power Consumption (With DC Lens) In normal operation : 2.6W In switching the DAY/NIGHT filter : 3.
Specifications Items Sub-items SCC-B1331P / SCC-B1031P Camera Type CCTV Camera (WDR & DAY/NIGHT) Device Image 1/3” Super-HAD IT CCD Total Pixels 795 x 596 Effective 752 x 582 System Scanning Interlace/Progressive Scanning Line 625 lines Frame 25frame/1sec Horizontal Frequency Vertical Frequency Functions 15,625 Hz 15,625 Hz Internal Mode 50 Hz Line-lock Mode Sens-up OFF OFF OFF Condition F No. 1.2 1.2 1.2 50 Hz Level 50 30 15 IRE IRE IRE Min. Scene illumination DAY NIGHT 0.4 Lux 0.
Items Image Sub-items SCC-B1331P / SCC-B1031P Device 1/3” Super-HAD IT CCD Horizontal 600 TV Lines Vertical 350 TV Lines Video Output - VBS 1.0Vp-p, 75 Ω S/N Ratio S/N Ratio Approx.
