SCC-A2333(P) SCC-A2033P DIGITAL COLOR CAMERA user manual ENG FRE GER SPA ITA imagine the possibilities Thank you for purchasing this Samsung product. To receive more complete service, please register your product at www.samsungsecurity.com Downloaded from www.Manualslib.
Safety information CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE REAR COVER. NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.. This symbol indicates high voltage is present inside. It is dangerous to make any kind of contact with any inside part of this product. This symbol alerts you that important literature concerning operation and maintenance has been included with this product.
Safety information 10. When cleaning, do not spray water directly onto parts of the product. Doing so may cause fire or electric shock. CAUTION 1. Do not drop objects on the product or apply strong shock to it. Keep away from a location subject to excessive vibrationor magnetic interference. 2. Do not install in a location subject to high temperature (over 50°C), low temperature (below 10°C), or high humidity. Doing so may cause fire or electric shock. 3.
Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, or other apparatus (including amplifiers) that produce heat. 9.
Contents Introduction Features PRODUCT & ACCESSORIES Part Names and Functions 6 7 8 Installation Connecting the Auto Iris Lens Connector Mounting the lens Connecting cables and checking operation 11 11 12 How to use OSD Menu 13 13 14 16 22 24 25 26 26 26 Specifications Specifications 28 English – 5 Downloaded from www.Manualslib.
Introduction FEATURES ❖ High Resolution • This camera has realized high resolution of 600 lines using the top-notch full digital image processing and special algorithm technologies. ❖ Intelligent Motion Detection & Tracking • This is an intelligent function that automatically detects a motion of an object. You can set a virtual fence so it sounds an alert if an object passes / enters /exits the virtual fence or virtual area.
Introduction PRODUCT & ACCESSORIES ❖ Product & Accessories • Main Product ENG Camera • Accessories Camera Holder(Mount) C Mount Adapter User’s Manual Auto Iris Lens Connector English – 7 Downloaded from www.Manualslib.
Introduction PART NAMES AND FUNCTIONS ❖ Side View Mount Adapter Fixing Grooves Auto Iris Lens Connector Camera Lens Auto Iris Lens Control Cable • Auto Iris Lens Connector This groove is used for screwing the mount adapter, a part of the bracket where the camera will be installed. • Auto Iris Lens Control Cable This cable transmits the power and signals from the camera for controlling the Auto Iris Lens.
Introduction ❖ Rear Panel n o p q r n o s p q English – 9 Downloaded from www.Manualslib.
Introduction n Input/Output Connector This connector has input and output ports for RS-485 control signals, DAY/NIGHT switching, and alarm output signals. No. Function Description 1 ALARM OUT 2 GND Grounding Port. 3 GND Grounding Port. 4 SHUTTER (S0) 5 SHUTTER (S1) 6 SHUTTER (S2) 7 5V OUT 8 DAY/NIGHT IN 9 RS-485 DATA- This is a port for connection to RS-485 DATA- signal line. 10 RS-485 DATA+ This is a port for connection to RS-485 DATA+ signal line.
Installation CONNECTING THE AUTO IRIS LENS CONNECTOR MOUNTING THE LENS When using the CS lens Mount the CS lens by rotating it clockwise as shown in the picture: CS lens CS 렌즈 ENG Connect each uncovered shutter control cables to the Auto Iris Lens Connector as the following When using the C lens Pin No.
Installation CONNECTING CABLES AND CHECKING OPERATION ① Connect one end of the BNC cable to the VIDEO OUT Port on the rear of the camera. ② Connect another end of the BNC cable to the VIDEO IN Port on the monitor. ③ Finally connect the power adapter to the camera. You can connect 2 lines of the power adapter to the camera using the Slot Head screwdriver as shown in the picture. (GND: cable with the white stripe line) 1. AL 2. GNARAM OUT 3. GND 5. SH 4. SH D 6. SHUTTE UTTE R(SO 7. 5V UTTER(S1) ) 8.
How to use OSD Menu USING ICONS IN THE MENU • (EXIT) Exits the menu setting. Before you exits the menu setting, select SAVE to save your settings, or select QUIT to cancel. • (RET) Returns to the previous menu. • (HOME) MAIN MENU ÃÃMAIN MENUÃÃ PROFILE CAMERA SET INTELLIGENCE PRIVACY ZONE OTHER SET COMMUNICATION SYSTEM INFO LANGUAGE Returns to the main menu. • (SAVE) Used to save your settings of MASK AREA, PRIVACY ZONE and more.
How to use OSD Menu PROFILE ePROFILEf ÃSTANDARD ITS BACKLIGHT DAY/NIGHT GAMING CUSTOM In the PROFILE menu, you can configure the following camera settings at once. CAMERA SET Menu STANDARD ITS BACKLIGHT DAY/NIGHT GAMING ALC ALC ALC ALC ALC - - - - - LENS DC DC DC DC DC LEVEL 0 0 0 0 0 OFF OFF BLC OFF OFF MOTION (F.FAST)--- (F.FAST)--- NORM (F.
How to use OSD Menu CAMERA SET Menu Previous Menu ITS BACKLIGHT DAY/NIGHT GAMING DAY DAY/NIGHT DAY DAY/NIGHT DAY - - - - - ATW2 ATW1 ATW1 ATW1 ATW1 RED 0 0 0 0 0 BLUE 0 0 0 0 0 - - - - - User setting allowed MID User setting allowed MID User setting allowed OFF ATW2 OFF ATW2 OFF RED User setting allowed 0 User setting allowed 0 User setting allowed BLUE User setting allowed 0 User setting allowed 0 User setting allowed 2 2 2 2 2 WHITE BAL DAY M
How to use OSD Menu ❖ CAMERA ID CAMERA SETUP CAMERA ID eCAMERA SETf ABCDEFGHIJKLMNOPQRSTUVWXYZ0 123456789 :?-+*()/ CAMERA ID OFF IRIS ALC MOTION (F.FAST)--DNR MID SHUTTER OFF SENS-UP AUTO X4 FLICKERLESS (OFF)--XDR MID d c DAY/NIGHT AUTO WHITE BAL DIGITAL ZOOM OFF DETAIL [2] V-SYNC INT AGC COLOR SUP LOW REVERSE OFF POSI/NEGA + PIP OFF d SPffeeSP LOCATION CAMERA-1.................. ...........................
How to use OSD Menu The LEVEL menu is used to adjust the overall brightness, where “+” will increase the brightness and “–” will decrease it. ② If you set the BACKLIGHT option to BLC, you will see a menu where you can set the BLC area. you can set the desired BLC zone by defining the size and location.
How to use OSD Menu ❖ SHUTTER AGC FIX LEVEL [OFF, AUTO 1/100(PAL:1/120), AUTO 1/250, AUTO 1/500, AUTO 1/1000, AUTO 1/2000, AUTO 1/4000, AUTO 1/10K , 1/100(PAL:1/120), 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10K , EXT] [01] If you press the SETUP switch with a FIX sub menu selected, you will see the appropriate screen. As a fixed value of the AGC gain is used in FIX mode, you can select one of the 16 detailed levels from VERY LOW to VERY HIGH before fixing it.
How to use OSD Menu 1/2000 ON OFF ON 1/4000 OFF ON ON 1/10K ON ON ON Note : – If IRIS mode is set to ELC, the SHUTTER menu will be deactivated as you adjust the brightness using the electronic shutter. – If the SENS-UP function is set to AUTO, only items of OFF and AUTO are available in the SHUTTER menu. – If the SENS-UP mode is set to FIX, the SHUTTER menu will be deactivated. – If the FLICKERLESS function is set to ON, the SHUTTER menu will be deactivated.
How to use OSD Menu • AUTO MASK AREA The camera will automatically switch between DAY and NIGHT mode, according to the lighting condition. If you press the SETUP switch with an AUTObased sub menu selected, you will see the appropriate screen. AUTO BURST DAYÆNIGHT BRIGHTNESS DWELL TIME NIGHTÆDAY BRIGHTNESS DWELL TIME MASK AREA OFF MID 2S MID 5S 1 2 You can specify Mask 1 and 2 simultaneously.
How to use OSD Menu • NIGHT – RED : Adjusts the strength of the red color. Use the NIGHT mode if you want to set the white balance differently according to the ambient luminance. If the NIGHT mode is set to OFF, the white balance will always operate as set in DAY mode; if not to OFF, the camera will switch to as set in DAY/NIGHT mode according to the brightness. In NIGHT mode, you can set the values of RED, BLUE and BRIGHTNESS. The screen will be displayed in colors according to your settings.
How to use OSD Menu ❖ V-SYNC [INT, LINE] INTELLIGENCE Select the vertical sync mode for INT or LINE. If you select INT, the camera will use the internal synchronization. If selecting LINE, the camera will use the external power source frequency for the synchronization. You can adjust the LL-PHASE. Note : – Use of DC 12V will fix V-SYNC to INT, which can not be changed. ❖ AGC COLOR SUP [LOW , MID, HIGH] Adjust the color scheme according to the AGC value.
How to use OSD Menu - How to set the area FENCE LINE AREA OFF OFF AREA PIXEL LEVEL [4] You can set the position and detection direction of the LINE, and the size and position of the AREA. - How to set the line LINE PIXEL LEVEL DIRECTION §¨ ① If you press the SETUP switch with the LINE option set to ON, you can specify the position and detection direction of the line.
How to use OSD Menu ❖ MASK AREA [1~4] Specify a detection exception area to mask. PRIVACY ZONE SETUP Select a mask number and specify the size and position. ePRIVACY ZONEf 1 7 MASK AREA 2 8 3 9 4 10 PRIVACY SET STYLE 5 11 ON MOSAIC1 ❖ DISPLAY [ON, OFF] With the DISPLAY option set to ON, a motion or a set ADVANCED function will be displayed on the screen, if detected.
How to use OSD Menu - How to set the point You can set each position of the 4 points. ① If you press the SETUP switch in , you will see the points available in the PRIVACY ZONE. Each time you press the SETUP switch, the points available will move. ② Use the cdef switch to set the position of each point. Set each position of the four points and press the SETUP switch to complete the positioning. - How to set the position You can move the position of the overall area.
How to use OSD Menu SYSTEM INFORMATION COMMUNICATION eCOMMUNICATIONf RS-485 PROTOCOL BAUD RATE ADDRESS eSYSTEM INFOf SAMSUNG 9600 0 The COMMUNICATION menu is used to configure the settings regarding RS-485 communications. Use the rear panel of the camera to connect to RS-485. TYPE 2_BOX_NOR_P PROTOCOL SAMSUNG ADDRESS 1 COMM. TYPE RS-485,HALF BAUD RATE 9600 SERIAL NO. 000000000000000 CAMERA VER. 0.50_090101 EEPROM VER. 0.
How to use OSD Menu ❖ Initial Configuration Table • Camera Configuration CAMERA ID OFF IRIS ALC AGC VERY HIGH MOTION (F.FAST) DNR MID SHUTTER OFF SENS-UP AUTO x4 (OFF) XDR MID DAY/NIGHT AUTO DIGITAL ZOOM OFF DETAIL [2] AGC COLOR SUP MID REVERSE OFF POSI/NEGA ENG FLICKERLESS + PIP OFF DIS OFF V-SYNC INT English – 27 Downloaded from www.Manualslib.
Specifications SPECIFICATIONS Items Sub-items SCC-A2333N Camera Type CCTV Camera (DAY/NIGHT) Device Image Scanning Pixels 1/2” Exview-HAD IT CCD Total 811 x 508 Effective 768 x 494 System Interlace Scanning Line 525 lines Frame 30frame/1sec Horizontal Frequency Vertical Frequency Internal Mode 15,734 Hz Line-lock Mode 15,750 Hz Internal Mode 59.94 Hz Line-lock Mode 60 Hz Sens-up OFF OFF OFF 512 times 512 times 512 times Min. Scene Illumination Condition F No. 1.2 1.2 1.2 1.2 1.
Specifications Items SCC-A2333N Horizontal 600 TV Lines Vertical 350 TV Lines Video Output - VBS 1.0Vp-p, 75 Ω S/N Ratio S/N Ratio Approx. 52dB Lens Drive Type MANUAL/AI(VIDEO/DC) Mount Type CS/C Input N/A Output 1 Output Remote Control Coaxitron (Data On Coax cable) Yes (with SCX-RD100) RS-485 Yes (Multi Protocol, 8ea) Environmental Conditions Operating Temperature -10˚C ~ +50˚C Humidity Less than 90% Power Requirement AC24V ± 10%(60Hz ± 0.
Specifications Items Sub-items SCC-A2333P / SCC-A2033P Camera Type CCTV Camera (DAY/NIGHT) Device Image Scanning Pixels 1/2” Exview-HAD IT CCD Total 795 x 596 Effective 752 x 582 System Interlace Scanning Line 625 lines Frame 25frame/1sec Horizontal Frequency Vertical Frequency Internal Mode 15,625 Hz Line-lock Mode 15,625 Hz Internal Mode 50 Hz Line-lock Mode 50 Hz Sens-up OFF OFF OFF 512 times 512 times 512 times Min. Scene Illumination Condition F No. 1.2 1.2 1.2 1.2 1.2 1.
Specifications Sub-items SCC-A2333P / SCC-A2033P - VBS 1.0Vp-p, 75 Ω S/N Ratio S/N Ratio Approx. 52dB Lens Drive Type MANUAL/AI(VIDEO/DC) Mount Type CS/C Input N/A Output 1 Output Remote Control Coaxitron (Data On Coax cable) Yes (with SCX-RD100) RS-485 Yes (Multi Protocol, 8ea) Environmental Conditions Operating Temperature -10˚C ~ +50˚C Humidity Less than 90% Power Requirement SCC-A2333P : AC24V ± 10%(50Hz±0.3Hz) DC12V ± 10% SCC-A2033P : AC220V ± 10%(50Hz±0.
Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with other household waste at the end of their working life.
