Security Camera User Manual

ManualsBrandsSamsung ManualsSecurity CameraSCC-931TP

ANTI-VANDAL DOME CAMERA

SCC-931T(P)

User’s Manual

Bedienungsanleitung

Guide de l’utilisateur

Guía del Usuario

Manuale d’uso

00355A(01) SCC-931T(P)-eng 2006.1.10 1:49 PM Page 1

Summary of content (22 pages)

PAGE 1
00355A(01) SCC-931T(P)-eng 2006.1.
PAGE 2
00355A(01) SCC-931T(P)-eng 2006.1.10 1:49 PM Page 2 Important Safety Instructions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN E CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE REAR COVER. NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL. This symbol indicates high voltage is present inside. It is dangerous to make any kind of contact with any inside part of this product.
PAGE 3
00355A(01) SCC-931T(P)-eng 2006.1.
PAGE 4
00355A(01) SCC-931T(P)-eng 2006.1.10 1:49 PM Page 6 Introduction The Anti-Vandal Dome Camera is a dome-typed surveillance device that offers the best features of surveillance for banks, retail stores, commercial buildings, industrial settings, and etc. It is designed to withstand intentional or accidental impact or vandalism, and is waterproof, dustproof, and shockproof.
PAGE 5
00355A(01) SCC-931T(P)-eng 2006.1.10 1:49 PM Page 8 Part Names and Functions ❶ Camera Operation Switches (Setup Switches) The functions of the camera operation switches change depending on whether the Camera is currently in the usual operation mode (i.e., the setup menu is not showing on the screen) or the setup menu mode. ➻ In the usual operation mode - [UP/DOWN] Directional keys: The [UP] key is used as the ZOOM TELE switch, and the [DOWN] key is used as the ZOOM WIDE switch.
PAGE 6
00355A(01) SCC-931T(P)-eng 2006.1.10 1:49 PM Page 10 Before Installation Checking the Contents of the Package Be sure to check that the following items are included in the package. ✔ PLASTIC ANCHOR 2 ea. ❙ for ceiling installation ✔ ASSY SCREW TAPPING 2 ea. ❙ for ceiling installation (TH M4 X L30 BLK + 0 RING) E Us er’s Anti-Vandal Dome Camera Gu ide User’s Guide E ✔ ASSY SCREW MACHINE 2 ea.
PAGE 7
00355A(01) SCC-931T(P)-eng 2006.1.10 1:49 PM Page 12 Before Installation Precautions for Installation and Use Installation Examples ✔ Please check whether the installation site can sufficiently support the weight of the Camera before installation. ✔ It can be directly installed on ceilings. ✔ It can be directly installed on pipes coming down from the ceiling. E ✔ Make sure that the cable is not caught on anything or its insulation sheath is not removed.
PAGE 8
1:49 PM Page 14 Installing the Camera The following cables are required to install and use the Camera. Power Adapter Cable E The power adapter that plugs into the Camera’s power input receptacle has the rated voltage of DC 12V 600mA or AC 24V 300mA. Video Cable The cable that connects the video output terminal of the Camera to the monitor is a BNC cable. For installing directly on a ceiling 1. Choose an installation site that can sufficiently support the weight of the equipments to be installed. 2.
PAGE 9
00355A(01) SCC-931T(P)-eng 2006.1.10 1:49 PM Page 16 Installing the Camera For installing on a pipe 6. Adjust the LENS direction. 1) Turn the STOPPER RING counter-clockwise as shown in the illustration to move the LENS body and COVER LENS. 2) Move the LENS body to adjust the vertical direction and turn the LENS body together with the COVER LENS to adjust the horizontal direction.
PAGE 10
00355A(01) SCC-931T(P)-eng 2006.1.10 1:49 PM Page 18 Installing the Camera E 18 ➠ E ➠ ➠ SAM SUNG 3) ➜ 1. Pull out the power cable and video cable sticking out from the PIPE assembly hole at the bottom of the camera to the PIPE assembly hole on the side. 1) Use a “minus” screwdriver or a coin to turn the CAP BOLT located on the side of the PIPE 2) assembly hole counter clockwise to remove the CASE.
PAGE 11
00355A(01) SCC-931T(P)-eng 2006.1.10 1:49 PM Page 20 Installing the Camera 7) Route the cables through the PIPE assembly hole on the side of the PIPE, align the INDEX KEY arrow mark ( ) of the CAMERA body to the groove on the CAMERA, mount the CAMERA body and turn it clockwise all the way tight, and then fasten the two SCREWS.
PAGE 12
00355A(01) SCC-931T(P)-eng 2006.1.10 1:49 PM Page 22 Connecting Cables and Checking Operations 1. First connect one end of the BNC cable to the VIDEO OUT. 2. Next, connect the other end of the BNC cable to the video input terminal of the monitor. 4. Decide on the type of power source you want to use and then adjust the power selection switch located at the bottom of the power adapter. Then, plug the power adapter into the power receptacle. 5.
PAGE 13
00355A(01) SCC-931T(P)-eng 2006.1.10 1:49 PM Page 24 Structure of the Setup Menu CAMERA ID SETUP CAMERA ID ON.../OFF Chapter 3 IRIS ALC.../MANU... Setup Menu Overview ON... CAMERA ID POSITION SETUP ALC... AUTOFOCUS AF/ONEAF/MF E AREA SETUP BLC SETUP LEVEL SETUP E LEVEL SETUP MANU... SHUTTER OFF/1/100~1/10K OFF/AUTO X2~X128 OFF/FIX X2~X128 This chapter looks into the overall organization of the setup menus and explains their functions. ENTER (2sec) AGC ON/OFF MOTION S.SLOW~F.
PAGE 14
00355A(01) SCC-931T(P)-eng 2006.1.10 1:49 PM Page 26 CAMERA MENU Organization ➼ CAMERA ID If you set the IRIS to ALC and press the [ENTER] key, a submenu screen where you can set the video output level and BLC will be displayed. In the LEVEL item, you can use the [LEFT/RIGHT] keys to set the video output level. If you set the BLC menu to ON, the BLC function will be applied to the screen area specified in the AREA menu.
PAGE 15
00355A(01) SCC-931T(P)-eng 2006.1.10 1:49 PM Page 28 CAMERA MENU Organization SIZE SIZE Using the [LEFT, RIGHT, TOP, BOTTOM] keys E POSITION AUTO FOCUS In the AUTO FOCUS menu, you can specify the Focus method. You can set the Focus to ONEAF, AF, or MF. ➼ POSITION While the area is not flashing, you can specify the size of the area by pressing the [LEFT, RIGHT, TOP, BOTTOM] keys.
PAGE 16
00355A(01) SCC-931T(P)-eng 2006.1.10 1:49 PM Page 30 CAMERA MENU Organization SHUTTER E AGC/MOTION In the SHUTTER menu, you can specify the speeds of the high-speed electronic shutter, AUTO low-speed shutter, and FIX low-speed shutter. The high-speed electronic shutter supports 7 shutter speeds from 1/100 seconds to 1/10K seconds, and the AUTO low-speed shutter and the FIX low-speed shutter support 12 shutter speeds from 2x to 128x respectively.
PAGE 17
00355A(01) SCC-931T(P)-eng 2006.1.10 1:49 PM Page 32 CAMERA MENU Organization When the SHUTTER is set to the low illumination mode in the setup MEUN, use the UP/DOWN keys to position the cursor to the MOTION and use the [LEFT/RIGHT] keys to execute the MOTION function. Use the LEFT key move toward the SLOW, the RIGHT key to move toward the FAST. E CAMERA ID IRIS AUTO FOCUS SHUTTER MOTION WHITE BAL SYNC SPECIAL MOTION DET EXIT OFF... ALC... AF AUTO X8 NORM ATW INT ...
PAGE 18
00355A(01) SCC-931T(P)-eng 2006.1.10 1:49 PM Page 34 CAMERA MENU Organization ➼ SYNC Select INT when using the interal synchronization. LINE... is necessary when synchronizing the camera phases to operate multiple cameras by using the external signal (AC signal -60Hz(NTSC), AC signal -50Hz(PAL)). You can adjust the PHASE to eliminate any phase deviation between each CAMERA set. E CAMERA ID IRIS AUTO FOCUS SHUTTER MOTION WHITE BAL SYNC SPECIAL MOTION DET EXIT OFF... ALC... AF AUTO X8 F.FAST ATW LINE.
PAGE 19
00355A(01) SCC-931T(P)-eng 2006.1.10 1:49 PM Page 36 CAMERA MENU Organization CAMERA ID IRIS AUTO FOCUS SHUTTER MOTION WHITE BAL SYNC SPECIAL MOTION DET EXIT E OFF... ALC... AF AUTO X8 F.FAST ATW INT ... OFF QUIT When you press the [ENTER] key CTRL TYPE RS485 PRESET D-ZOOM PIP MIRROR POSI/NEGA ZOOM SPEED DETAIL (0) LANGUAGE RET --... ... OFF --OFF + 3 ----|-ENGLISH You can store up to 10 Zoom and Focus positions with the PRESET.
PAGE 20
00355A(01) SCC-931T(P)-eng 2006.1.10 1:49 PM Page 38 CAMERA MENU Organization ➼ LANGUAGE CTRL TYPE RS485 PRESET D-ZOOM PIP MIRROR POSI/NEGA ZOOM SPEED DETAIL (0) LANGUAGE RET E --... ... X2 ON... OFF + 3 ----|-ENGLISH Using the [LEFT, RIGHT] keys CTRL TYPE RS485 PRESET D-ZOOM BIB SPIEGEL POSI/NEGA ZOOM GESCHW DETAIL (0) SPRACHE RUE --... ... X2 EIN...
PAGE 21
00355A(01) SCC-931T(P)-eng 2006.1.
PAGE 22
00355A(01) SCC-931T(P)-eng 2006.1.10 1:49 PM Page 42 Product Specifications ITEM Back Light Compensation Sense Up Digital Zoom Motion Detection Video Control Signal Output Lens E 42 DESCRIPTION Remote Control Off/On (Area Setting) Off/Auto 2x~128x/Fix 2x~128x Off/On(x10), PIP Off/On (Area/Sensitivity Setting) POSI/NEGA, MIRROR, Detail Setting Composite Video Out : 1.0 Vp-p 75 ohms/BNC Focal length : 3.6 ~ 43.2 mm Aperture : F1.8(Wide), F2.