High Resolution Camera User Manual SCB-5000 SCB-5000D
High Resolution Camera User Manual Copyright ©2014 Samsung Techwin Co., Ltd. All rights reserved. Trademark is the registered logo of Samsung Techwin Co., Ltd. The name of this product is the registered trademark of Samsung Techwin Co., Ltd. Other trademarks mentioned in this manual are the registered trademark of their respective company. Restriction Samsung Techwin Co., Ltd shall reserve the copyright of this document.
Before operating the camera, confirm the camera model and correct input power voltage. To help you understand this manual thoroughly, we'll introduce our model description.
safety information CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol indicates that dangerous voltage consisting a risk of electric shock is present within this unit.
6. Do not place conductive objects (e.g. screwdrivers, coins, metal parts, etc.) or containers filled with water on top of the camera. doing so may cause personal injury due to fire, electric shock, or falling objects. 8. If any unusual smells or smoke come from the unit, stop using the product. in such case, immediately disconnect the power source and contact the service center. continued use in such a condition may cause fire or electric shock. 9.
safety information FCC Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions : 1) This device may not cause harmful interference, and 2) This device must accept any interference received including interference that may cause undesired operation. CAUTION This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of FCC Rules.
important safety instructions 1. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, or other apparatus (including amplifiers) that produce heat. 9. Do not defeat the safety purpose of the polarized or grounding-type plug.
contents introduction 9 10 11 13 Features Components and Accessories Overview Lens connection 15 15 16 Connecting to Monitor Connecting to Power Using Coaxial Communications camera operation 18 18 Menu Configuration Menu Setup troubleshooting 31 Troubleshooting specifications 32 34 Specifications Dimension 9 15 18 31 32 _ contents
introduction Features Excellent Sensitivity The built-in high sensitivity COLOR CMOS produces a clear image. - 0.03Lux (F1.2, 50IRE), 0.001Lux (1sec, F1.2, 50IRE) 0.01Lux (F1.2, 30IRE), 0.0003Lux (1sec, F1.2, 30IRE) SSNR4 (Samsung Super Noise Reduction) Function High performance W7 Chip removes noises of GAIN resulting from the low light level and shows a vivid, high definition video even in the dark place.
introduction Communication Coaxial communication methods are supported. - Coaxial Communications : Pelco Coaxitron OSD The camera’s OSD is complimented by 17 languages. - English, Japanese, Spanish, French, Portuguese, Korean, German, Italian, Chinese, Russian, Polish, Czech, Romanian, Serbian, Swedish, Danish, Turkish. Components and Accessories Check if the following items are included in the product package.
Overview Front View ● introduction 1 2 4 3 ❶ Tripod Mounting Bracket Screw Hole : U sed to fix the camera on a bracket. The screw sizes for this hole are as follows. 1/4"-20 UNC (20 THREAD) L:4.5mm±0.2mm (ISO standard), or 0.197" (ASA standard) 2 Back Focus Control Lever : It acquires margins for lens adjustments. 3 Lens adaptor: Install this if you use the lens. 4 Auto Iris Lens Connector : Used to connect Auto Iris Lens plug.
introduction Rear View 1 1 2 VIDEO VIDEO 3 POWER POWER 4 2 3 4 1 Function Setup switch Display the menu on the screen and move the cursor to four directions to confirm ststus or after changing a selected item. 2 Power LED : This lamp is lit when the camera is receiving power normally. 3 Video OUT Terminal : Sends video signal and connects to the video input terminal of the monitor.
Lens The lens is not supplied with this camera. Purchase a lens suitable for your environment. This camera accepts the auto iris lens and both C-and CS-mount lens. T o use the functions of this camera effectively it is recommended that a DC type Auto Iris lens is used. Keep the lens surface clean, if it becomes contaminated with dirt or fingerprints the picture quality suffers. When Using Auto Iris Lens 1.
introduction 2. Turn the C-Mount lens clockwise to install it. C-Mount Adapter 3. After combining the lens, adjust the focus. When Using a CS-Mount lens (Sold separately) Remove the protective cover from the front of the camera, and turn the CS-Mount lens clockwise to install it. After combining the lens, adjust the focus. M Use the lens connector shown in the following figure. If the dimensions of the connector are not correct, it may damage the camera, or the lens may not be installed firmly.
connection Connecting to Monitor Connect the Video OUT port on the rear panel of the camera to a monitor. ● connection VIDEO POWER Monitor SCB-5000 A s the connecting method varies with the instruments, refer to the manual supplied with the instrument. Only connect the cable when the power is turned off. Connecting to Power Since power specifications differ depending on the model, make sure to check your model name and specifications before connecting power.
connection DC power Since SCB-5000D the power specification support DC, connect DC 12V, 500mA Adaptor. VIDEO POWER When the resistance value of copper wire is at [20°C(68°F)] Copper wire size (AWG) #24 (0.22mm2) #22 (0.33mm2) #20 (0.52mm2) #18 (0.83mm2) Resistance value(Ω/m) 0.078 0.050 0.030 0.018 Voltage Drop (V/m) 0.028 0.018 0.011 0.006 A s shown in the table above, voltage decreases as the wire gets longer.
DVR ALARM 1 DVD RECORDE R HDD NETWORK 2 BACKUP 3 REC REC 4 5 6 7 9 10 11 12 13 14 15 16 8 ZOOM FREEZE BACKUP SEARCH TELE WIDE MODE AUDIO OPEN/CLOSE VIEW ALRAM PRESET MENU USB RETURN : BNC - Video Cable The camera's video output port is connected to the monitor with a BNC coaxial cable, shown below. If the distance between the camera and the monitor exceeds the recommended maximum, please use an auxiliary video amp.
camera operation Menu Configuration MAIN SETUP PROFILE ● BASIC ● ITS ● DAY/NIGHT ● INDOOR ● BACKLIGHT ● USER SSDR ● ON ● OFF WHITE BAL ● ATW ● MANUAL ● OUTDOOR ● AWC SET ● INDOOR ● MERCURY EXPOSURE ● BRIGHTNESS ● AGC ● LENS ● SSNR4 ● SHUTTER ● RETURN BACKLIGHT ● OFF ● USER BLC ● HLC SPECIAL ● DISPLAY ● DAY/NIGHT ● DIS ● COMM ADJ ● IMAGE ADJ ● DEFOG ● PRIVACY ● VIDEO ANALYTICS ● RETURN EXIT ● SAVE ● NOT SAVE ● RESET Menu Setup Use the Function Setup switch within the camera.
MAIN SETUP Select the function using the Function Setup switch. ▶ 1. PROFILE 2. SSDR 3. WHITE BAL BASIC Change the status using the Function Setup switch. ON ATW 5. BACKLIGHT ● Camera Operation 4. EXPOSURE OFF 6. SPECIAL 7. EXIT SAVE 1. Press the Function Setup switch. Main SETUP menu is displayed on the monitor screen. 2. Select a desired function using the Function Setup switch. Place the cursor over a desired item. 3. Set up a selected item by using the Function Setup switch. 4.
camera operation INDOOR : It will be set automatically to help you take a picture in a regular indoor lighting condition. USER : Automatically configures the camera to your custom settings. 1) Select Custom for Simple Setup mode. 2) Configure the menu options to your custom settings. 3) The settings are automatically saved as Custom mode. 4) Profile user mode don't initialize when menu resets. 3. In the PROFILE menu, you can confi gure the following camera settings at once.
White Bal (White Balance) Use the White Balance function to adjust the screen color. 2. Select a desired mode using the Function Setup switch. MAIN SETUP 1. PROFILE 2. SSDR ▶ 3. WHITE BAL BASIC ON ATW ※ Select one of the following 6 modes, as appropriate for your purpose. ATW : Select this when the color temperature is between 1,800˚K and 10,500˚K. OUTDOOR : Use it in a color temperature range of 1,800K to 10,500K.(including Natrium).
camera operation EXPOSURE 1. W hen the SETUP menu screen is displayed, select ‘EXPOSURE’ by using the Function Setup switch so that the arrow indicates ‘EXPOSURE’. 2. Select a desired mode using the Function Setup switch. BRIGHTNESS : Adjusts the video brightness. LENS : U sing this function, you can control the screen brightness. EXPOSURE SETUP -------▶ 1. BRIGHTNESS 2. LENS 3. SHUTTER 4. AGC 5. SSNR4 6. RETURN 50 DC HIGH ON - DC : Select Auto Iris Lens.
BACKLIGHT The camera uses our own W7 chips that are designed to clearly display the object and the background despite severe reverse light. USER BLC : Enables a user to select a desired area on a picture and view that area more clearly. - L EVEL : Adjusts the brightness level of a monitoring area. - TOP/BOTTOM/LEFT/RIGHT : Adjust the area to be enhanced. - RETURN : Return to the MAIN SETUP menu. BLC SETUP ▶ 1. LEVEL 2. TOP 3. BOTTOM 4. LEFT 5. RIGHT 6.
camera operation SPECIAL 1. W hen the SETUP menu screen is displayed, select ‘SPECIAL’ by using the Function Setup switch so that the arrow indicates ‘SPECIAL’. 2. Select a desired mode using the Function Setup switch. DISPLAY ❶ If the SPECIAL menu screen is displayed, use the Function Setup switch so that the arrow indicates ‘DISPLAY’. ❷S elect a desired mode using the Function Setup switch. - CAM TITLE SPECIAL SETUP ▶ 1. DISPLAY 2. COMM ADJ 3. IMAGE ADJ 4. DAY/NIGHT 5. DEFOG 6. PRIVACY 7. DIS 8.
- FONT COLOR : Y ou can change the OSD font color. (White, Yellow, Green, Red, Blue) - LANGUAGE : You can select the menu language according to your requirements. - RETURN : Return to the SPECIAL menu. COMM ADJ (Communication Adjustment) : - RETURN : Return to the SPECIAL menu. IMAGE ADJ ❶ I f the SPECIAL menu screen is displayed, use the Function Setup switch so that the arrow indicates ‘IMAGE ADJ’. ❷S elect a desired mode using the Function Setup switch. COMM SETUP ▶ 1. COAX 2.
camera operation DAY/NIGHT : You can display pictures in color or in black and white. ❶ If the SPECIAL menu screen is displayed, use the Function Setup switch so that the arrow indicates ‘DAY/NIGHT’. ❷ Select a desired mode using the Function Setup switch according to the picture display you want. - AUTO : T he mode is switched AUTO SETUP to ’Color‘ in a normal ▶ 1. BURST MODE ON environment, but 2. DURATION NORMAL switches to ’B/W‘ mode 3. DWELL TIME 30 SEC when ambient illumination 4.
DEFOG : You can use the defog mode to allow the camera to automatically detect the fog density of the screen and display a clear image despite smog, fog or general poor visibility. ❶ I f the SPECIAL menu screen is displayed, use the Function Setup switch so that the arrow indicates ‘DEFOG’. M MIDDLE If the defog mode is set to Auto, and if the amount of fog is reduced, the function level will be also reduced. If you want to maintain the same level of defogging, set it to Manual.
camera operation VIDEO ANALYTICS ❶ I f the SPECIAL menu screen is displayed, use the Function Setup switch so that the arrow indicates ‘VIDEO ANALYTICS’. ❷S elect a desired mode using the Function Setup switch. VIDEO ANALYTICS 2. MOTION 3. RETURN - TAMPERING : If the screen view TAMPERING is obstructed or the ▶ 1. SENSITIVITY camera location 2. ALARM OUT is changed, 3. RETURN tampering detection, you can issue an event signal by setting it.
NON DET. AREA : Specify a detection exception area to mask.Select a mask area number and specify the size and position. SEL AREA : You can select up to 4 areas. etermines whether to use the area selected in the AREA. MODE : D TOP/BOTTOM/LEFT/RIGHT : Adjust the size and position of the selected area. RETURN : Return to the MOTION DET menu. INDICATOR : If an object moves in a pattern set by the user, it will be displayed on the screen as a box.
camera operation - If an object fixed in the same location keeps moving - Moving away from the camera or approaching the camera. Little location change on the screen.
troubleshooting Troubleshooting If you have trouble operating your camera, refer to the following table. If the guidelines do not enable you to solve the problem, contact an authorized technician. Troubleshooting Nothing appears on the screen. Check that the power cord and line connection between the camera and monitor are properly connected. Check that you have properly connected BNC cable to the camera. Check the type of lens. The image on the screen is dim.
specifications Specifications SCB-5000N SCB-5000ND SCB-5000P SCB-5000PD Video Imaging Device 1/3” 1.3M CMOS Total Pixels 1312(H) x 1069(V) Effective Pixels 1305(H) x 1049(V) Scanning System Progressive Scan Synchronization Internal H : 15.734KHz / V : 59.94Hz Color : 1000 TVL Horizontal Resolution B/W : 1000 TVL Frequency H : 15.625KHz / V : 50Hz Min. Illumination 0.03Lux (F1.2, 50IRE), 0.001Lux (1sec, F1.2, 50IRE) 0.01Lux (F1.2, 30IRE), 0.0003Lux (1sec, F1.
SCB-5000N SCB-5000ND SCB-5000P SCB-5000PD Off / On Privacy Masking Off / On (24 programmable zones with 4points polygonal masking) Gain Control Off / Low / Middle / High White Balance ATW / Outdoor / Indoor / Manual / AWC / MERCURY (1,800K° ~ 10,500K°) Electronic Shutter Speed 1 sec ~ 1/12,000 sec Digital Zoom Off / On (1x ~ 16x) Reverse Off / H-Rev / V-Rev / HV-Rev Profile Basic, Day & Night, Backlight, ITS, Indoor, User Communication Coaxial Control ( SPC-300 Compatible) Protocol Coa
Dimension 34_ specifications Unit: mm
Unit: mm
SALES NETWORK SAMSUNG TECHWIN CO., LTD. Samsung Techwin R&D Center, 6, Pangyo-ro 319beon-gil, Bundang-gu, Songnam-si, Gyeonggi-do 463-400, Korea TEL : +82-70-7147-8740~60, FAX : +82-31-8018-3745 SAMSUNG TECHWIN AMERICA Inc. 100 Challenger Rd. Suite 700 Ridgefield Park, NJ 07660 Toll Free : +1-877-213-1222 Direct : +1-201-325-6920 Fax : +1-201-373-0124 www.samsungcctvusa.com www.samsungtechwin.com www.samsungsecurity.com SAMSUNG TECHWIN EUROPE LTD.
