SCB-4000(P) SCB-4000PH DIGITAL COLOR CAMERA user manual imagine the possibilities Thank you for purchasing this Samsung product. To receive more complete service, please register your product at www.samsungsecurity.
Safety information CAUTION RISK OF ELECTRIC SHOCK.DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSISTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT.
Safety information 9. IF THIS PRODUCT FAILS TO OPERATE NORMALLY, CONTACT THE NEAREST SERVICE CENTER. NEVER DISASSEMBLE OR MODIFY THIS PRODUCT IN ANY WAY. (SAMSUNG IS NOT LIABLE FOR PROBLEMS CAUSED BY UNAUTHORIZED MODIFICATIONS OR ATTEMPTED REPAIR.) 10. WHEN CLEANING, DO NOT SPRAY WATER DIRECTLY ONTO PARTS OF THE PRODUCT. DOING SO MAY CAUSE FIRE OR ELECTRIC SHOCK. CAUTION d of nce nce y c ed k, uch e zed 1. DO NOT DROP OBJECTS ON THE PRODUCT OR APPLY STRONG BLOWS TO IT.
Important Safety Instructions 1. Read these instructions. 2. 3. 4. 5. 6. 7. 8. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Do not install near any heat sources such as radiators, heat registers, or other apparatus (including amplifiers) that produce heat. 9.
es wide sult have y, or Contents Introduction Features PRODUCT & ACCESSORIES Part Names and Functions 6 7 8 Installation Connecting the Auto Iris Lens Connector Mounting the lens Connecting cables and checking operation 11 11 12 How to use OSD Menu Using Icons in the Menu Main Menu Profile Camera Setup Intelligence Privacy Zone Setup Other Set Communication System Information 13 13 14 16 22 24 25 26 26 Specifications Specifications 28 English – 5
Introduction FEATURES ❖ High Resolution • This camera has realized high resolution of 600 lines using the top-notch full digital image processing and special algorithm technologies. ❖ Intelligent Motion Detection & Tracking • This is an intelligent function that automatically detects a motion of an object. You can set a virtual fence so it sounds an alert if an object passes / enters /exits the virtual fence or virtual area.
Introduction PRODUCT & ACCESSORIES and ❖ Product & Accessories • Main Product t e.
Introduction ❖R PART NAMES AND FUNCTIONS ❖ Side View Mount Adapter Fixing Grooves Auto Iris Lens Connector Camera Lens Auto Iris Lens Control Cable • Auto Iris Lens Connector This groove is used for screwing the mount adapter, a part of the bracket where the camera will be installed. • Auto Iris Lens Control Cable This cable transmits the power and signals from the camera for controlling the Auto Iris Lens.
Introduction ❖ Rear Panel n o p q r s alled.
Introduction n Input/Output Connector This connector has input and output ports for RS-485 control signals, DAY/NIGHT switching, and alarm output signals. No. Function 1 ALARM OUT 2 GND Grounding Port. 3 GND Grounding Port. 4 SHUTTER (S0) 5 SHUTTER (S1) 6 SHUTTER (S2) Description Alarm out port for motion detection. (Open collector type) This is a port for selecting an external high speed shutter mode. If connected in LOW (0V), it will become ON inside.
e the CONNECTING THE AUTO IRIS LENS CONNECTOR MOUNTING THE LENS When using the CS lens Mount the CS lens by rotating it clockwise as shown in the picture: CS lens CS 렌즈 ENG he Installation Connect each uncovered shutter control cables to the Auto Iris Lens Connector as the following When using the C lens Pin No.
Installation CONNECTING CABLES AND CHECKING OPERATION ① Connect one end of the BNC cable to the VIDEO OUT Port on the rear of the camera. ② Connect another end of the BNC cable to the VIDEO IN Port on the monitor. USI ③ Finally connect the power adapter to the camera. You can connect 2 lines of the power adapter to the camera using the Slot Head screwdriver as shown in the picture. (GND: cable with the white stripe line) • E B sa • R • R • 1. ALA 2. GNDRAM OUT 3. GND 5. SHU 4. SHU 6.
wer How to use OSD Menu USING ICONS IN THE MENU • (EXIT) Exits the menu setting. Before you exits the menu setting, select SAVE to save your settings, or select QUIT to cancel. • (RET) Returns to the previous menu. MAIN MENU ÃÃMAIN MENUÃÃ PROFILE CAMERA SET INTELLIGENCE PRIVACY ZONE OTHER SET COMMUNICATION SYSTEM INFO • (SAVE) Used to save your settings of MASK AREA, PRIVACY ZONE and more. Once you save your settings, they will remain even if you select QUIT in the menu.
How to use OSD Menu PROFILE ePROFILEf Pr M ÃSTANDARD ITS BACKLIGHT DAY/NIGHT GAMING CUSTOM W In the PROFILE menu, you can configure the following camera settings at once. CAMERA SET Menu Previous Menu Sub-menus IRIS ALC LENS LEVEL STANDARD ITS BACKLIGHT DAY/NIGHT GAMING ALC ALC ALC ALC ALC - - - - - DC DC DC DC DC 0 0 0 0 0 OFF OFF BLC OFF OFF MOTION (F.FAST)--- (F.FAST)--- NORM (F.
How to use OSD Menu CAMERA SET Menu Previous Menu Sub-menus WHITE BAL DAY MODE ITS BACKLIGHT DAY/NIGHT GAMING DAY DAY/NIGHT DAY DAY/NIGHT DAY - - - - - ATW2 ATW1 ATW1 ATW1 ATW1 RED 0 0 0 0 0 BLUE 0 0 0 0 0 NIGHT BRIGHTNESS MODE DETAIL STANDARD - - - - - User setting allowed MID User setting allowed MID User setting allowed OFF ATW2 OFF ATW2 OFF RED User setting allowed 0 User setting allowed 0 User setting allowed BLUE User setting allowed 0 User
How to use OSD Menu ❖ CAMERA ID CAMERA SETUP eCAMERA SETf ABCDEFGHIJKLMNOPQRSTUVWXYZ0 123456789 :?-+*()/ CAMERA ID OFF IRIS ALC MOTION (F.FAST)--DNR MID SHUTTER OFF SENS-UP AUTO X4 FLICKERLESS (OFF)--XDR MID d c DAY/NIGHT AUTO WHITE BAL DIGITAL ZOOM OFF DETAIL [2] V-SYNC INT AGC COLOR SUP LOW REVERSE OFF POSI/NEGA + PIP OFF d SPffeeSP LOCATION .......................... ........................... The CAMERA ID menu is used for you to assign a unique name to a camera.
How to use OSD Menu The LEVEL menu is used to adjust the overall brightness, where “+” will increase the brightness and “–” will decrease it. ② If you set the BACKLIGHT option to BLC, you will see a menu where you can set the BLC area. you can set the desired BLC zone by defining the size and location. ALC sign ct LENS DC LEVEL [00]----I---BACKLIGHT BLC AREA USER D.
How to use OSD Menu ❖ SHUTTER AGC FIX LEVEL [OFF, AUTO 1/100(PAL:1/120), AUTO 1/250, AUTO 1/500, AUTO 1/1000, AUTO 1/2000, AUTO 1/4000, AUTO 1/10K , 1/100(PAL:1/120), 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10K , EXT] [01] If you press the SETUP switch with a FIX sub menu selected, you will see the appropriate screen. As a fixed value of the AGC gain is used in FIX mode, you can select one of the 16 detailed levels from VERY LOW to VERY HIGH before fixing it.
UTO 0, d /120) r, ect. es ast e LC will er s DEO FF h d R(S2) F F F How to use OSD Menu 1/2000 ON OFF ON 1/4000 OFF ON ON 1/10K ON ON ON Note : – If IRIS mode is set to ELC, the SHUTTER menu will be deactivated as you adjust the brightness using the electronic shutter. – If the SENS-UP function is set to AUTO, only items of OFF and AUTO are available in the SHUTTER menu. – If the SENS-UP mode is set to FIX, the SHUTTER menu will be deactivated.
How to use OSD Menu • AUTO • NI MASK AREA The camera will automatically switch between DAY and NIGHT mode, according to the lighting condition. If you press the SETUP switch with an AUTObased sub menu selected, you will see the appropriate screen. AUTO BURST DAYÆNIGHT BRIGHTNESS DWELL TIME NIGHTÆDAY BRIGHTNESS DWELL TIME MASK AREA OFF MID 2SEC 1 MID 5SEC 2 You can specify Mask 1 and 2 simultaneously.
How to use OSD Menu • NIGHT r will will nd ernal he f d in n – RED : Adjusts the strength of the red color. Use the NIGHT mode if you want to set the white balance differently according to the ambient luminance. If the NIGHT mode is set to OFF, the white balance will always operate as set in DAY mode; if not to OFF, the camera will switch to as set in DAY/NIGHT mode according to the brightness. In NIGHT mode, you can set the values of RED, BLUE and BRIGHTNESS.
How to use OSD Menu ❖ V-SYNC [INT, LINE] INTELLIGENCE Select the vertical sync mode for INT or LINE. If you select INT, the camera will use the internal synchronization. If selecting LINE, the camera will use the external power source frequency for the synchronization. You can adjust the LL-PHASE. Note : – Use of DC 12V will fix V-SYNC to INT, which can not be changed. ❖ AGC COLOR SUP [LOW , MID, HIGH] Adjust the color scheme according to the AGC value.
the ION] How to use OSD Menu - How to set the area FENCE LINE AREA OFF OFF You can set the position and detection direction of the LINE, and the size and position of the AREA. - How to set the line LINE PIXEL LEVEL DIRECTION [4] §¨ s NCE] n he cted mes e r line TER” he AREA PIXEL LEVEL [4] ① If you press the SETUP switch with the LINE option set to ON, you can specify the position and detection direction of the line.
How to use OSD Menu ❖ MASK AREA [1~4] Specify a detection exception area to mask. Select a mask number and specify the size and position. MASK AREA 2 8 3 9 4 10 PRIVACY SET STYLE 5 11 ❖ DISPLAY [ON, OFF] With the DISPLAY option set to ON, a motion or a set ADVANCED function will be displayed on the screen, if detected. ❖ SENSITIVITY ② The PRIVACY function will protect your privacy by screening the privacy area that you have specified during monitoring.
y cy CY ze How to use OSD Menu - How to set the point You can set each position of the 4 points. ① If you press the SETUP switch in , you will see the points available in the PRIVACY ZONE. Each time you press the SETUP switch, the points available will move. ② Use the cdef switch to set the position of each point. Set each position of the four points and press the SETUP switch to complete the positioning. - How to set the position You can move the position of the overall area.
How to use OSD Menu COMMUNICATION eCOMMUNICATIONf RS-485 PROTOCOL BAUD RATE ADDRESS eSYSTEM INFOf SAMSUNG-E 9600 0 The COMMUNICATION menu is used to configure the settings regarding RS-485 communications. Use the rear panel of the camera to connect to RS-485. [Camera I/O Connector] Use the cdef switch to specify the protocol, baud rate and address (0~255) for communications. ❖ PROTOCOL Select a communication protocol. ❖ BAUD RATE Select a baud rate.
he mera How to use OSD Menu ❖ Initial Configuration Table • Camera Configuration CAMERA ID OFF IRIS ALC AGC VERY HIGH MOTION (F.
Specifications SPECIFICATIONS Items Sub-items SCB-4000N CCTV Camera (DAY/NIGHT) Camera Type Device Image Pixels 1/2” Exview-HAD IT CCD Total 811 x 508 Effective 768 x 494 System Interlace Scanning Line 525 lines Frame Scanning 30frame/1sec Horizontal Frequency Vertical Frequency Min. Scene Illumination Internal Mode 15,734 Hz Line-lock Mode 15,750 Hz Internal Mode 59.94 Hz Line-lock Mode Sens-up OFF OFF OFF 512 times 512 times 512 times Min. Scene illumination DAY NIGHT 0.10 Lux 0.
Specifications Items Sub-items S/N Ratio 600 TV Lines Vertical 350 TV Lines - VBS 1.0Vp-p, 75 Ω Video Output Lens SCB-4000N Horizontal Resolution S/N Ratio Approx. 52dB Lens Drive Type MANUAL/AI(VIDEO/DC) Mount Type CS/C Alarm Input N/A Output 1 Output Remote Control Coaxitron (Data On Coax cable) Yes (with SCX-RD100) RS-485 Yes (Multi Protocol, 8ea) Environmental Conditions Operating Temperature -10˚C ~ +50˚C Humidity Less than 90% Power Requirement AC24V ± 10%(60Hz ± 0.
Specifications Items Sub-items SCB-4000P/SCB-4000PH Camera Type CCTV Camera (DAY/NIGHT) Device Image Pixels 1/2” Exview-HAD IT CCD Total 795 x 596 Effective 752 x 582 System Interlace Scanning Line 625 lines Frame Scanning 25frame/1sec Horizontal Frequency Vertical Frequency Min. Scene Illumination Internal Mode 15,625 Hz Line-lock Mode 15,625 Hz Internal Mode 50 Hz Line-lock Mode Sens-up OFF OFF OFF 512 times 512 times 512 times Condition F No. Level 1.2 IRE 50 IRE 1.2 30 1.
Specifications Items Sub-items Video Output - S/N Ratio Lens SCB-4000P/SCB-4000PH VBS 1.0Vp-p, 75 Ω S/N Ratio Approx. 52dB Lens Drive Type MANUAL/AI(VIDEO/DC) Mount Type CS/C Alarm Input N/A Output 1 Output Remote Control Coaxitron (Data On Coax cable) Yes (with SCX-RD100) RS-485 Yes (Multi Protocol, 8ea) Environmental Conditions Operating Temperature -10˚C ~ +50˚C Humidity Less than 90% Power Requirement SCB-4000P : AC24V ± 10%(50Hz±0.
SALES NETWORK SAMSUNG TECHWIN CO., LTD. Samsungtechwin R&D Center, 701, Sampyeong-dong, Bundang-gu, Seongnam-si, Gyeonggi-do, Korea, 463-400 TEL : +82-70-7147-8740~60 FAX : +82-31-8018-3745 SAMSUNG TECHWIN AMERICA Inc. 1480 Charles Willard St, Carson, CA 90746, UNITED STATES Tol Free : +1-877-213-1222 FAX : +1-310-632-2195 www.samsungcctvusa.com www.samsungsecurity.com www.samsungtechwin.com SAMSUNG TECHWIN EUROPE LTD.
