Compact High Resolution ATM Camera User Manual SCB-3020 SCB-2020
C Compact High Resolution ATM Camera User Manual Copyright ©2010 Samsung Techwin Co., Ltd. All rights reserved. Trademark is the registered logo of Samsung Techwin Co., Ltd. The name of this product is the registered trademark of Samsung Techwin Co., Ltd. Other trademarks mentioned in this manual are the registered trademark of their respective company. Restriction Samsung Techwin Co., Ltd shall reserve the copyright of this document.
Safety information CAUTION RISK OF ELECTRIC SHOCK.DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSISTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT.
Safety information 3. DO NOT CONNECT MULTIPLE CAMERAS TO A SINGLE ADAPTER. EXCEEDING THE CAPACITY MAY CAUSE ABNORMAL HEAT GENERATION OR FIRE. CA 4. SECURELY PLUG THE POWER CORD INTO THE POWER RECEPTACLE. INSECURE CONNECTION MAY CAUSE FIRE. 1. D F 5. WHEN INSTALLING THE CAMERA, FASTEN IT SECURELY AND FIRMLY. THE FALL OF CAMERA MAY CAUSE PERSONAL INJURY. 6. DO NOT PLACE CONDUCTIVE OBJECTS (E.G. SCREWDRIVERS, COINS, METAL PARTS, ETC.) OR CONTAINERS FILLED WITH WATER ON TOP OF THE CAMERA.
E. LLED OCK, Safety information CAUTION 1. DO NOT DROP OBJECTS ON THE PRODUCT OR APPLY STRONG BLOWS TO IT. KEEP AWAY FROM A LOCATION SUBJECT TO EXCESSIVE VIBRATION OR MAGNETIC INTERFERENCE. 2. DO NOT INSTALL IN A LOCATION SUBJECT TO HIGH TEMPERATURE (OVER 50°), LOW TEMPERATURE (BELOW -10°), OR HIGH HUMIDITY. DOING SO MAY CAUSE FIRE OR ELECTRIC SHOCK. 3. IF YOU WANT TO RELOCATE THE ALREADY INSTALLED PRODUCT, BE SURE TO TURN OFF THE POWER AND THEN MOVE OR REINSTALL IT. R 4.
Safety information 2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. Caution THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS FOR A CLASS A DIGITAL DEVICE, PURSUANT TO PART 15 OF FCC RULES. THESE LIMITS ARE DESIGNED TO PROVIDE REASONABLE PROTECTION AGAINST HARMFUL INTERFERENCE WHEN THE EQUIPMENT IS OPERATED IN A COMMERCIAL ENVIRONMENT.
Safety information E ED Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with other household waste at the end of their working life.
Important Safety Instructions 1. 2. 3. 4. 5. 6. 7. 8. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Do not install near any heat sources such as radiators, heat registers, or other apparatus (including amplifiers) that produce heat. 9.
Contents Introduction Features .................................................. 10 PRODUCT & ACCESSORIES .................................................. 11 Part Names and Functions .................................................. 12 Installation der Connecting the Remote Controller .................................................. 15 Connecting to Monitor .................................................. 16 Connecting to Power ..................................................
Introduction Features ❖ High Resolution • High Resolution This camera has realized high resolution of 600 lines using the top-of the range full digital image processing and special algorithm technologies. ❖ VPS(Virtual Progressive Scan) • This is an advanced technology that reproduces a sharp progressive image. This is appropriate to high quality recording and file transfer via the Internet. ( For SCB-2020, the VPS option is not available.
Introduction ❖ Digital Power Synchronization • The full digital Line Lock function directly adjusts the vertical camera synchronization to enhance the operationability and reliability of this camera. ❖ Random Trigger Function • Recording video while synchronized to a random trigger signal is available. (This feature is not supported by SCB-2020.
Introduction ❖R PART NAMES AND FUNCTIONS ❖ Front n o n Po L-PUL SE GND p q r s t ALM .OU R n Lens 3.7mm (F2.0) o Bracket Used to fix the product on a wall or ceiling. p Video Out Outputs camera’s video signal, which is to be connected to a monitor’s Video In. The port can be used for menu control if connected with a controller. q Power In Power cable is connected to this terminal. r L/L PULSE Clock port for LINE-LOCK control. s GND Grounding port. t ALM.
be Introduction ❖ Rear 1. EXT-IN 2. KEY_E 3. GND 4. DSPSTB 5. DSPSDI 6. DSPSDO 7. DSPSCK 8. FSPE 1. L/L PULSE 2. Alarm_out 3. GND 4. Video out 5. GND 6. V+12V 1. EXT-IN 2. KEY_E 3. GND 4. DSPSTB 5. DSPSDI 6. DSPSDO 7. DSPSCK 8. FSPE n Port for camera’s firmware update. For further details, refer to the below table: NO Port Name 1 EXT-IN Input port for random trigger. Description 2 KEY-E Input port for multiplexed analog voltage key. 3 GND Grounding port for the board.
Introduction ❖ Rear CO To c 1. EXT-IN 2. KEY_E 3. GND 4. DSPSTB 5. DSPSDI 6. DSPSDO 7. DSPSCK 8. FSPE 1. L/L PULSE 2. Alarm_out 3. GND 4. Video out 5. GND 6. V+12V 1. L/L Pulse PULSE 2. Alarm_out Alarm out 3. GND 4. Video out ou 5. GND 6. V+12V o Port for camera’s firmware update. For further details, refer to the below table: NO Port Name 1 L/L PULSE Clock port for LINE-LOCK control. Description 2 Alarm_out Alarm out port for motion detection. 3 GND 4 Video out Grounding Port.
Installation CONNECTING THE REMOTE CONTROLLER To control the camera, a remote controller should be connected to. POWER STATUS POWER (X)1 23 23 9 01 (X)10 9 01 23 45 6 78 L 45 6 S ON ON 1 2 1 2 3 4 5 6 7 8 TERMINATION PROTOCOL 45 6 9 01 ADDRESS (X)100 78 ON 78 OFF CABLE COMPENSATION REMOTE CONTROLLER SPC-300 1. Connect the camera’s video out port to the CONTROLLER’s VIDEO IN. 2. Connect the CONTROLLER’s VIDEO OUT port to a monitor’s video in.
Installation CONNECTING TO MONITOR US Connect the Video Output jack to the VIDEO-IN jack of monitor. • E B s POWER VIDEO • R • CCTV Camera Monitor • CONNECTING TO POWER Connect the adaptor to the power input terminal as shown in the figure below. The recommended adaptor specification for SCB-3020/SCB-2020 is DC 12V / 500mA.
How to use OSD Menu USING ICONS IN THE MENU • (EXIT) Exits the menu setting. Before you exits the menu setting, select SAVE to save your settings, or select QUIT to cancel. • (RET) MAIN MENU MAIN MENU PROFILE CAMERA SET INTELLIGENCE PRIVACY ZONE OTHER SET SYSTEM INFO Returns to the previous menu. • (SAVE) Used to save your settings of MASK AREA, PRIVACY ZONE and more. Once you save your settings, they will remain even if you select QUIT in the menu.
How to use OSD Menu PROFILE ePROFILEf Prev STANDARD ITS BACKLIGHT DAY/NIGHT GAMING CUSTOM DNR SHU SEN XDR DAY In the PROFILE menu, you can configure the following camera settings at once.
How to use OSD Menu CAMERA SET Menu Previous Menu STANDARD Sub-menus ITS BACKLIGHT DAY/NIGHT GAMING DNR MID MID MID MID MID SHUTTER (OFF)--- (OFF)--- (OFF)--- (OFF)--- (OFF)--- SENS-UP AUTOx2 AUTOx2 AUTOx2 AUTOx4 AUTOx4 XDR MID MID MID MID MID AUTO DAY/NIGHT NIGHT AUTO - BURST OFF DAY ON OFF OFF DAY/NIGHT DAY DAY/NIGHT DAY - - - - BLUE 0 NIGHT ATW1 ATW2 ATW1 ATW1 0 0 0 0 0 - User setting allowed MODE OFF 0 - MID 0 - 0 - User setting allowed MID
How to use OSD Menu CAMERA SET Menu Previous Menu STANDARD Sub-menus ELC ELC ITS ELC - BACKLIGHT ELC - DAY/NIGHT ELC - GAMING Prev ELC - - IRIS LEVEL 0 BACKLIGHT OFF MOTION (F.FAST)--- 0 0 0 0 OFF (F.FAST)--- BLC OFF OFF F.FAST (F.
How to use OSD Menu CAMERA SET Menu Previous Menu STANDARD Sub-menus NIGHT - BRIGHTNESS WHITE BAL DETAIL ITS User setting allowed MODE OFF BACKLIGHT MID DAY/NIGHT - GAMING - - User setting allowed MID User setting allowed ATW2 OFF ATW2 OFF RED User setting allowed 0 User setting allowed 0 User setting allowed BLUE User setting allowed 0 User setting allowed 0 User setting allowed 2 2 2 2 2 ❖ ITS It will be set automatically so you can easily check the traffic condition
How to use OSD Menu ❖C CAMERA SETUP eCAMERA SETf eCAMERA SETf CAMERA ID OFF VPS OFF IRIS ELC MOTION F.FAST DNR MID SHUTTER (OFF)--SENS-UP AUTO X2 FLICKERLESS (OFF)--XDR MID d CAMERA ID IRIS MOTION DNR SHUTTER SENS-UP FLICKERLESS XDR d OFF ELC F.
e. How to use OSD Menu ❖ CAMERA ID [OFF, ON] ABCDEFGHIJKLMNOPQRSTUVWXYZ0 123456789 :?-+*()/ SPffeeSP LOCATION CAMERA-1.................. ........................... The CAMERA ID menu is used for you to assign a unique name to a camera. If you press the SETUP switch with the CAMERA ID menu selected, you will see the appropriate screen. You can enter up to 54 alphanumeric or special characters for the CAMERA ID.
How to use OSD Menu ELC LEVEL [00]----I---BACKLIGHT BLC AREA USER ③ If you set the BACKLIGHT option to WDR, you will see a menu where you can set the WDR options. Specify the composition level in the WEIGHT menu. You can also select any of OUTDOOR, and INDOOR in WHITE BAL. For ANTI ROLLING, select an option to reduce the COLOR ROLLING effect.
How to use OSD Menu Note : – If the DAY/NIGHT menu of the CAMERA SET is set to AUTO, the MOTION menu will be deactivated. AGC FIX CCD LEVEL [01] F. C e he ue. en. ur ❖ DNR [OFF,LOW,MID,HIGH, USER(1~16)] You can configure the DNR (Digital Noise Reduction) related settings. If you press the SETUP switch with a FIX sub menu selected, you will see the appropriate screen.
How to use OSD Menu ❖ XDR (eXtended Dynamic Range) [OFF, LOW, MID, HIGH] Actively controls the gamma compensation in the way it operates the ambient luminance contrast in a certain pixel unit to determine the optimal visibility. Select one from OFF, LOW, MID and HIGH. Closing to HIGH will increase the compensation level. ❖ DAY/NIGHT [DAY,NIGHT,AUTO] • DAY If set to DAY, it will be fixed to DAY mode regardless of the ambient conditions.
e. r ble he rion for ble he ng by ch How to use OSD Menu If you press the SETUP switch in item 1 or 2 of the MASK menu, you will see a menu where you can specify an area to mask. MASK AREA WHITE BAL DAY/NIGHT MODE RED BLUE R-GAIN B-GAIN DAY AWC [00]----I---[00]----I---[0128] [0128] You can specify Mask 1 and 2 simultaneously. The mask is used only for determining the switch and any excessive bright area at night will be masked.
How to use OSD Menu Note : – You can set the values of R-GAIN and B-GAIN only in AWC mode. – If AGC is set to OFF or FIX, you can not access the NIGHT menu. – For adjusting the white balance, the following 5 modes are provided: • ATW1(Auto Tracing White Balance mode 1): The camera can automatically adjust the color temperature in real time, according to the ambient conditions. The color temperature ranges from approx. 2500K to 9300K.
How to use OSD Menu ❖ DETAIL . L ❖ V-SYNC the e s of ❖ AGC COLOR SUP [0~3] Controls the horizontal or vertical distinction. [INT, LINE] Select the vertical sync mode for INT or LINE. If you select INT, the camera will use the internal synchronization. If selecting LINE, the camera will use the external power source frequency for the synchronization. You can adjust the LL-PHASE.
How to use OSD Menu ❖ ADVANCED INTELLIGENCE eINTELLIGENCEf MOTION ADVANCED MASK AREA DISPLAY SENSITIVITY RESOLUTION ALARM OUT 1 [3] [3] OFF OFF 2 3 4 ON -H • FENCE This is to detect if a moving object passes through the specified LINE or AREA. You can set the motion detection and tracking in the INTELLIGENCE menu. ❖ MOTION [OFF, FIXED/MOVED, FENCE] Detects a motion of an object and displays an image of any moving object before tracking the moving route.
How to use OSD Menu - How to set the line age - How to set the area LINE PIXEL LEVEL DIRECTION [4] §¨ AREA PIXEL LEVEL [4] gh d s e R” or ea. e 1 If you press the SETUP switch with the LINE option set to ON, you can specify the position and detection direction of the line. 2 If you change the PIXEL LEVEL for setting the position, specify the pixel that moves by a single pressure of the cdef switch.
How to use OSD Menu Note : – If you set the LINE of the FENCE to ON, PRIVACY 12 will not be available. Functions of FENCE, PIP, DIS and DIGITAL ZOOM (if the digital zoom factor is set to larger than 1x) can not be used simultaneously. – In the boundary of the defined AREA and LINE, a FENCE detection error may occur if two or more moving objects overlap with each other or one object separates in multiple directions. ❖ MASK AREA [1~4] ❖A Specify a detection exception area to mask.
or n en a How to use OSD Menu ❖ ALARM OUT PRIVACY ZONE SETUP If you set a desired menu item to ON, the camera will sound an alert if it detect the appropriate motion. ePRIVACY ZONEf 1 7 ALARM OUT MOTION FIXED/MOVED FENCE LINE AREA ENTER EXIT ON ON 2 8 3 9 4 10 PRIVACY SET STYLE 5 11 6 12 ON MOSAIC1 ON ON ON The PRIVACY function will protect your privacy by screening the privacy area that you have specified during monitoring. You can specify up to 12 privacy zones.
How to use OSD Menu Use the cdef switch to select one from PRIVACY 1 through 12. - How to set the position You can move the position of the overall area. Select one from PRIVACY 1~12 and press the SETUP switch to confirm your setting. You can specify a pixel that moves as you change the PIXEL LEVEL to set the position. 1 By pressing the SETUP switch in , you can move the overall position of the privacy zone.
How to use OSD Menu OTHER SET N>, cy ion EXTERNAL TRG STILL TIME DELAY TIME OFF FIX eOTHER SETf EXTERNAL TRG FACTORY DEFAULTS OSD COLOR OFF BW You can set the STILL TIME to 1~4 seconds. VACY of eOTHER SETf FACTORY DEFAULTS OSD COLOR BW If DELAY TIME is set to FIX, the DELAY TIME will be set in sync with the STILL TIME if set to USER, the DELAY TIME will be set to your setting. Note : – If VPS is set to OFF, the EXTERNAL TRG menu will be deactivated.
How to use OSD Menu ❖ Initial Configuration Table SYSTEM INFORMATION eSYSTEM INFOf TYPE 3_ATM_WDR_P SERIAL NO. 000000000000000 CAMERA VER. V1.00_100528 SP • Camera Configuration You can view the system information including the serial number and camera version. CAMERA ID OFF VPS OFF IRIS ELC AGC VERY HIGH MOTION F.
Specifications SPECIFICATIONS Items SCB-3020N SCB-3020P SCB-2020N SCB-2020P POWER Input Voltage/Current Power Consumption 12V DC Max. 2.0W Max. 1.6W Video Imaging Device 1/3” Double Scan CCD 1/3” Super HAD CCD Total Pixels 811(H) x 508(V) 795(H) x 596(V) 811(H) x 508(V) 795(H) x 596(V) Effective Pixels 768(H) x 494(V) 752(H) x 582(V) 768(H) x 494(V) 752(H) x 582(V) Scanning System 2 : 1 Interlace Synchronization Frequency Horizontal Resolution Min.
Specifications Items SCB-3020N SCB-3020P Multi-language Support English, Japanese, Spanish, French, Portuguese, Taiwanese, Korean Multi-language Support English, French, German, Spanish, Italian, Chinese, Russian, Polish, Czech, Romanian, Serbian, Swedish, Danish, Turkish, Portuguese SCB-2020N SCB-2020P Multi-language Support English, Japanese, Spanish, French, Portuguese, Taiwanese, Korean Multi-language Support English, French, German, Spanish, Italian, Chinese, Russian, Polish, Czech, Romanian, Se
, h, , , n, h, , Specifications Items SCB-3020N SCB-3020P SCB-2020N SCB-2020P Electronic Shutter Speed 1/60 ~ 1/200,000 1/50 ~ 1/200,000 1/60 ~ 1/200,000 1/50 ~ 1/200,000 Digital Zoom Flip / Mirror Profile Off/On (1x ~ 16x) Off/H/V/(H/V) Standard / ITS / Backllight / Day & Night / Gaming / Custom VPS SCB-3020N,SCB-3020P : OFF/ON SCB-2020N,SCB-2020P : - Intelligent Video (Fixed / Moved), Fence(Line, Area) PIP Off / On Alarm 1 Output Communication Coaxial Control by SPC-300 (Option) ENVIR
Specifications DIMENSIONS Unit (mm) 40 – High Resolution Compact ATM Camera
mm) MEMO
MEMO
MEMO
SALES NETWORK SAMSUNG TECHWIN CO., LTD. Samsungtechwin R&D Center, 701, Sampyeong-dong, Bundang-gu, Seongnam-si, Gyeonggi-do, Korea, 463-400 TEL : +82-70-7147-8740~60, FAX : +82-31-8018-3745 SAMSUNG TECHWIN AMERICA Inc. 1480 Charles Willard St, Carson, CA 90746, UNITED STATES Tol Free : +1-877-213-1222, FAX : +1-310-632-2195 www.samsungcctvusa.com www.samsungsecurity.com www.samsungtechwin.com SAMSUNG TECHWIN EUROPE LTD.
