Compact High Resolution ATM Camera User Manual SCB-3020 SCB-2020
Safety information CAUTION RISK OF ELECTRIC SHOCK.DO NOT OPEN Compact High Resolution ATM Camera User Manual CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSISTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT. Copyright ©2010 Samsung Techwin Co., Ltd. All rights reserved.
Safety information Safety information 3. DO NOT CONNECT MULTIPLE CAMERAS TO A SINGLE ADAPTER. EXCEEDING THE CAPACITY MAY CAUSE ABNORMAL HEAT GENERATION OR FIRE. CAUTION 4. SECURELY PLUG THE POWER CORD INTO THE POWER RECEPTACLE. INSECURE CONNECTION MAY CAUSE FIRE. 1. DO NOT DROP OBJECTS ON THE PRODUCT OR APPLY STRONG BLOWS TO IT. KEEP AWAY FROM A LOCATION SUBJECT TO EXCESSIVE VIBRATION OR MAGNETIC INTERFERENCE. 5. WHEN INSTALLING THE CAMERA, FASTEN IT SECURELY AND FIRMLY.
Safety information Safety information 2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. Caution THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS FOR A CLASS A DIGITAL DEVICE, PURSUANT TO PART 15 OF FCC RULES. THESE LIMITS ARE DESIGNED TO PROVIDE REASONABLE PROTECTION AGAINST HARMFUL INTERFERENCE WHEN THE EQUIPMENT IS OPERATED IN A COMMERCIAL ENVIRONMENT.
Contents Important Safety Instructions 1. 2. 3. 4. 5. 6. 7. 8. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Do not install near any heat sources such as radiators, heat registers, or other apparatus (including amplifiers) that produce heat. 9.
Introduction Features ❖ High Resolution • This camera has realized high resolution of 600 lines using the top-notch full digital image processing and special algorithm technologies. ❖ VPS(Virtual Progressive Scan) • This is an advanced technology that reproduces a sharp progressive image. This is appropriate to high quality recording and file transfer via the Internet. ( For SCB-2020, the VPS option is not available.
Introduction Introduction ❖ Rear PART NAMES AND FUNCTIONS ❖ Front 1. EXT-IN 2. KEY_E 3. GND 4. DSPSTB 5. DSPSDI 6. DSPSDO 7. DSPSCK 8. FSPE 1. L/L PULSE 2. Alarm_out 3. GND 4. Video out 5. GND 6. V+12V n o n Port for camera’s firmware update. For further details, refer to the below table: L-PUL SE GND p q r s t ALM .OU R n Lens 3.7mm (F2.0) o Bracket Used to fix the product on a wall or ceiling. p Video Out Outputs camera’s video signal, which is to be connected to a monitor’s Video In.
Introduction Installation ❖ Rear CONNECTING THE REMOTE CONTROLLER To control the camera, a remote controller should be connected to. POWER STATUS POWER (X)10 (X)1 23 23 9 01 23 9 01 9 01 ADDRESS (X)100 78 ON L 45 6 S 78 OFF CABLE COMPENSATION 45 6 1. L/L Pulse PULSE 2. Alarm_out Alarm out 3. GND 4. Video out ou 5. GND 6. V+12V ON ON 1 2 1 2 3 4 5 6 7 8 TERMINATION PROTOCOL 45 6 1. L/L PULSE 2. Alarm_out 3. GND 4. Video out 5. GND 6. V+12V 78 1. EXT-IN 2. KEY_E 3. GND 4.
Installation How to use OSD Menu CONNECTING TO MONITOR USING ICONS IN THE MENU Connect the Video Output jack to the VIDEO-IN jack of monitor. • (EXIT) Exits the menu setting. Before you exits the menu setting, select SAVE to save your settings, or select QUIT to cancel. POWER VIDEO • (RET) MAIN MENU MAIN MENU PROFILE CAMERA SET INTELLIGENCE PRIVACY ZONE OTHER SET SYSTEM INFO Returns to the previous menu.
How to use OSD Menu How to use OSD Menu PROFILE CAMERA SET Menu ePROFILEf Previous Menu STANDARD ITS BACKLIGHT DAY/NIGHT GAMING CUSTOM MID Previous Menu Sub-menus VPS (OFF)--- (OFF)--- (OFF)--- (OFF)--- AUTOx2 AUTOx2 AUTOx4 AUTOx4 XDR MID MID MID MID MID AUTO AUTO DAY AUTO DAY NIGHT OFF DAY DAY/NIGHT DAY DAY/NIGHT DAY - - - - - ATW1 ATW2 ATW1 ATW1 0 OFF OFF RED 0 0 0 0 ELC ELC ELC ELC ELC BLUE 0 0 0 0 0 0 OFF - User setting allowed User set
How to use OSD Menu How to use OSD Menu CAMERA SET Menu CAMERA SET Menu Previous Menu STANDARD Sub-menus ELC ELC ITS ELC - BACKLIGHT ELC - DAY/NIGHT ELC - GAMING Previous Menu NIGHT ELC - - LEVEL 0 0 0 0 0 OFF BLC OFF OFF MOTION (F.FAST)--- (F.FAST)--- F.FAST (F.
How to use OSD Menu How to use OSD Menu ❖ CAMERA ID CAMERA SETUP eCAMERA SETf eCAMERA SETf CAMERA ID OFF VPS OFF IRIS ELC MOTION F.FAST DNR MID SHUTTER (OFF)--SENS-UP AUTO X2 FLICKERLESS (OFF)--XDR MID d CAMERA ID IRIS MOTION DNR SHUTTER SENS-UP FLICKERLESS XDR d DAY/NIGHT DAY WHITE BAL DIGITAL ZOOM OFF DETAIL [2] V-SYNC INT AGC COLOR SUP MID REVERSE OFF POSI/NEGA + PIP OFF d DIS DIS OFF OFF Setup the general functions of zoom camera module.
How to use OSD Menu ELC LEVEL [00]----I---BACKLIGHT BLC AREA USER ③ If you set the BACKLIGHT option to WDR, you will see a menu where you can set the WDR options. Specify the composition level in the WEIGHT menu. You can also select any of OUTDOOR, and INDOOR in WHITE BAL. For ANTI ROLLING, select an option to reduce the COLOR ROLLING effect.
How to use OSD Menu ❖ DAY/NIGHT [DAY,NIGHT,AUTO] • DAY If set to DAY, it will be fixed to DAY mode regardless of the ambient conditions. • NIGHT If set to NIGHT, it will be fixed to Black-and-White mode regardless of the ambient conditions. If you press the SETUP switch with a NIGHT sub menu selected, you will see a menu where you can set Burst to OFF/ON. If BURST is set to ON, the Burst signal will output together with the black-and-white composite video signal.
How to use OSD Menu Note : – You can set the values of R-GAIN and B-GAIN only in AWC mode. – If AGC is set to OFF or FIX, you can not access the NIGHT menu. – For adjusting the white balance, the following 5 modes are provided: • ATW1(Auto Tracing White Balance mode 1): The camera can automatically adjust the color temperature in real time, according to the ambient conditions. The color temperature ranges from approx. 2500K to 9300K.
How to use OSD Menu ❖ ADVANCED INTELLIGENCE eINTELLIGENCEf MOTION ADVANCED MASK AREA DISPLAY SENSITIVITY RESOLUTION ALARM OUT 1 [3] [3] OFF OFF 2 3 4 ON [OFF, FIXED/MOVED, FENCE] Detects a motion of an object and displays an image of any moving object before tracking the moving route.
How to use OSD Menu Note : – If you set the LINE of the FENCE to ON, PRIVACY 12 will not be available. Functions of FENCE, PIP, DIS and DIGITAL ZOOM (if the digital zoom factor is set to larger than 1x) can not be used simultaneously. – In the boundary of the defined AREA and LINE, a FENCE detection error may occur if two or more moving objects overlap with each other or one object separates in multiple directions.
How to use OSD Menu Use the cdef switch to select one from PRIVACY 1 through 12. Select one from PRIVACY 1~12 and press the SETUP switch to confirm your setting. You can specify a pixel that moves as you change the PIXEL LEVEL to set the position. PRIVACY ZONE SET1 PIXEL LEVEL [4] - How to set the position You can move the position of the overall area. 1 By pressing the SETUP switch in , you can move the overall position of the privacy zone.
How to use OSD Menu ❖ Initial Configuration Table SYSTEM INFORMATION SPECIFICATIONS • Camera Configuration eSYSTEM INFOf TYPE 3_ATM_WDR_P SERIAL NO. 000000000000000 CAMERA VER. V1.00_100528 Specifications You can view the system information including the serial number and camera version.
Specifications Items Specifications SCB-3020P SCB-2020P Operational On Screen Display Chinese Camera Title Communication Color / B/W / Auto / Extern Off / On / WDR Wide Dynamic Range On / Off Digital Image Stabilization On / Off Operating Temperature / Humidity Dimension Weight Motion Detection Built-in Privacy Function On / Off (12 Areas, Polygonal Type) Sens-up (Frame Integration) Auto / Off (Selectable x2 ~ x512) Gain Control SCB-2020P On / Off 1 Output Coaxial Control by SPC-300 (Opti
MEMO MEMO
MEMO MEMO
SALES NETWORK SAMSUNG TECHWIN CO., LTD. Samsungtechwin R&D Center, 701, Sampyeong-dong, Bundang-gu, Seongnam-si, Gyeonggi-do, Korea, 463-400 TEL : +82-70-7147-8740~60, FAX : +82-31-8018-3745 SAMSUNG TECHWIN AMERICA Inc. 1480 Charles Willard St, Carson, CA 90746, UNITED STATES Tol Free : +1-877-213-1222, FAX : +1-310-632-2195 www.samsungcctvusa.com www.samsungsecurity.com www.samsungtechwin.com SAMSUNG TECHWIN EUROPE LTD.
