Supreme Resolution WDR Camera User Manual SCB-3003
B h ■ ■ Supreme Resolution WDR Camera User Manual Copyright ©2013 Samsung Techwin Co., Ltd. All rights reserved. Trademark is the registered logo of Samsung Techwin Co., Ltd. The name of this product is the registered trademark of Samsung Techwin Co., Ltd. Other trademarks mentioned in this manual are the registered trademark of their respective company. Restriction Samsung Techwin Co., Ltd shall reserve the copyright of this document.
Before operating the camera, confirm the camera model and correct input power voltage. To help you understand this manual thoroughly, we'll introduce our model description.
safety information 6 CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol indicates that dangerous voltage consisting a risk of electric shock is present within this unit.
6. Do not place conductive objects (e.g. screwdrivers, coins, metal parts, etc.) or containers filled with water on top of the camera. doing so may cause personal injury due to fire, electric shock, or falling objects. 8. If any unusual smells or smoke come from the unit, stop using the product. in such case, immediately disconnect the power source and contact the service center. continued use in such a condition may cause fire or electric shock. c e e 9.
safety information im FCC Statement 1 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions : 2 3 4 5 6 7 1) This device may not cause harmful interference, and 2) This device must accept any interference received including interference that may cause undesired operation. CAUTION This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of FCC Rules.
o e 1. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, or other apparatus (including amplifiers) that produce heat. 9. Do not defeat the safety purpose of the polarized or grounding-type plug.
in contents F INTRODUCTION 9 9 11 11 15 Features Components and Accessories Overview Lens 18 18 19 20 Connecting to Monitor Connecting to Power Control via RS-485 Interface Using Coaxial Communications 21 21 Menu Configuration Menu Setup y y CONNECTION 18 CAMERA OPERATION 21 TROUBLESHOOTING 40 y y 39 Troubleshooting 39 SPECIFICATIONS y y 40 42 Specifications Dimension y y y 8_ contents
introduction Features y Excellent Sensitivity The built-in high sensitivity COLOR CCD produces a clear image. - Color : 0.1Lux @ F1.2, 0.0002 Lux (Sens-up, 512x) B/W : 0.01 Lux @ F1.2, 0.00002 Lux ( Sens-up, 512x ) y Intelligence Without assistance from an external sensor, this camera independently detects and traces objects while examining stillness and movement to activate the alarm.
introduction y VPS(Virtual Progressive Scan) By adopting a proprietary SV-V DSP chip, the camera delivers clear, high quality pictures even in backlight, by increasing exposure in dark areas while decreasing it in bright areas; a corrected image with clear details results. C C y Video/DC Drive Lens Support You can select Video or DC Drive Lens from the menu. y DIS (Digital Image Stabilizer) The DIS function compensates for any camera movement, to produce more stable pictures.
n Components and Accessories Check if the following items are included in the product package. Auto Iris Lens Connector Plug C-Mount Adapter Supreme Resolution WDR Camera Quick Guide SCB-3003 d Quick Manual 10 level terminal block Overview Front View ➊ ➋ ❶ Tripod Mounting Bracket Screw Hole : Used to fix the Tripod Mounting Bracket to the top of the camera. ➋ C-Mount Lens Adapter : Install this adapter to use a C-Mount Lens.
introduction Side View ➌ Auto Iris Lens Connector : Used to connect Auto Iris Lens plug. Bottom View ➍ ➍ Tripod Mounting Bracket Screw Hole : Used to fix the camera on a bracket or tripod. The screw sizes for this hole are as follows. M L 1/4"-20 UNC (20 THREAD) L:4.5mm±0.2mm (ISO standard), or 0.197" (ASA standard) Tripod is not supplied with the camera. Please check the installed documentation of tripod for the installation of cameras.
Rear View ❿ ⓫ ⓬ ⓭ ➏ ⓮ ➐ ➑ ➒ ⓯ ● INTRODUCTION ➎ ⓰ ➎ Function Setup Button y SET button : (Short press) The SIMPLE FOCUS operates. (Long press) The menu screen is displayed. Use it to go the lower menu on the menu screen. y Up & Down button : Used to move the cursor up or down in the menu screen. y Left x right button : Move the cursor left and right on the menu screen. If the menu screen is not desired, move the focus to Near or Far.
introduction ❿ D & N Input Port : You can switch to Day & Night Mode by connecting an external signal to this port. L ⓫ MD Output Port : Motion detection signals are output through this port. T T ⓬ GND ⓭ Video OUT Terminal : Sends video signal and connects to the video input terminal of the monitor. ⓮ Power LED : This lamp is lit when the camera is receiving power normally. ⓯ Power input terminal : Connects to the power appropriate to each model.
The lens is not supplied with this camera. Purchase a lens suitable for your environment. This camera accepts the auto iris lens and both C-and CS-mount lens. M To use the functions of this camera effectively it is recommended that a DC type Auto Iris lens is used. Keep the lens surface clean, if it becomes contaminated with dirt or fingerprints the picture quality suffers. When Using Auto Iris Lens 1. Strip the insulation of the auto iris lens cable 8mm from the end. approx. 8mm 2.
introduction 4. Fit the cover of the auto iris lens connector plug, remove the protective glass cover from the front of the camera, and fasten the auto iris lens by turning it clockwise. 5. Combine the lens and adjust the focus manually first. Then use SIMPLE FOCUS to easily adjust the focus. When Using a C/CS-Mount lens Before installing a lens, identify whether the lens to be installed is a C-Mount or CS-Mount. This camera is set for a CS-Mount Lens by default.
M Use the lens connector shown in the following figure. If the dimensions of the connector are not correct, it may damage the camera, or the lens may not be installed firmly. there may be problems. Use a lens that weighs less than 450g. When adjusting the Automatic Level Control (ALC) of an auto iris lens, use Av mode if available. If you use the Pk mode, the picture brightness may change continuously. C-Mount Lens: 10mm or less CS-Mount Lens: 5mm or less y When Using a C-Mount Lens 1.
connection W Connecting to Monitor Connect the Video OUT port on the rear panel of the camera to a monitor. CCD Camera CCD 카메라 Monitor 모니터 y ö ö y As the connecting method varies with the instruments, refer to the manual supplied with the instrument. y Only connect the cable when the power is turned off. C T C Connecting to Power (1 Since power specifications differ depending on the model, make sure to check your model name and specifications before connecting power.
When the resistance value of copper wire is at [20°C(68°F)] #24 (0.22mm2) #22 (0.33mm2) #20 (0.52mm2) Resistance value( /m) 0.078 0.050 0.030 #18 (0.83mm2) 0.018 Voltage Drop (V/m) 0.028 0.018 0.011 0.006 y As shown in the table above, voltage decreases as the wire gets longer. Therefore use of an excessively long adaptor output line for connection to the camera may affect the performance of the camera.
connection c Using Coaxial Communications M y Coaxial Communications System y OSD Control method y If you set the sensitivity level of the sub menu item (of COAX) to “Low”, you have to press the MENU/ENTER (OSD KEY) button twice in a row to access the OSD menu.
al or Menu Configuration MAIN SETUP LENS ● DC ● VIDEO ● MANUAL EXPOSURE ● BRIGHTNESS ● SENS-UP ● SHUTTER ● RETURN ● AGC WHITE BAL ● ATW ● MANUAL ● OUTDOOR ● AWC→SET ● INDOOR BACKLIGHT ● OFF ● SSDR ● USER BLC ● WDR ● HLC SSNR3 ● ON ● OFF DAY/NIGHT ● AUTO ● B/W ● EXTERN ● COLOR PROFILE ● BASIC ● ITS ● DAY/NIGHT ● INDOOR ● BACKLIGHT ● USER SPECIAL ● IMAGE ADJ ● INTELLIGENCE ● COMM ADJ ● CAM TITLE ● PRIVACY ● LANGUAGE ● SYNC ● DIS ● RETURN EXIT ● SAVE ● NOT SAVE ● RESET Menu
camera operation y Main SETUP menu is displayed on the monitor screen. MAIN SETUP Select the function using the Function Setup button 䯝 1. LENS 2. EXPOSURE 3. WHITE BAL 4. BACKLIGHT 5. SSNR3 6. DAY/NIGHT 7. PROFILE 8. SPECIAL 9. EXIT Change the status by moving the setup switch left or right. DC ATW OFF ON AUTO BASIC SAVE 2. Select a desired function using the Function Setup button. y Place the cursor over a desired item. 3. Set up a selected item by using The Function Setup button. 4.
1) Set your focus to the next sequence. y FOCUS initialization : Move the focus to the default (BFL). y Lens adjustment : Manually adjusts the lens focus and make an image look clearer. y AFTER D/N : Automatically adjust the focus of the video. 2) ER D/N : After D or N is switched, select whether to use the focus readjustment function. - IRIS SPEED (DC) : Adjusts the Iris control speed of the DC lens. If the control speed is too slow or fast, please use this menu to adjust the speed.
camera operation EXPOSURE 1. When the SETUP menu screen is displayed, select ‘EXPOSURE’ by using the Function Setup button so that the arrow indicates ‘EXPOSURE’. MAIN SETUP 1. LENS 䯝 2. EXPOSURE 3. WHITE BAL 2. Select a desired mode using the Function Setup button. DC ATW EXPOSURE SETUP y BRIGHTNESS : Adjusts the video brightness. 䯝 1.BRIGHTNESS y SHUTTER : You can select the shutter. 2.SHUTTER - ESC : Select this to control the shutter 3.AGC speed automatically. If ESC is selected, 4.
When you use a DC lens, set the shutter mode to --- if color rolling occurs. When the SHUTTER is set to ESC after selecting the Internal Synchronization Type, the picture may become unstable if the camera faces a bright fluorescent light. Therefore, take care when choosing the installation position. When the SHUTTER is set to MANUAL or A.FLK mode, SENS-UP will be disabled. When using an external input, Connect the Shutter Speed Select Terminal to the Ground Terminal.
camera operation White Bal (White Balance) Use the White Balance function to adjust the screen color. 1. When the SETUP menu screen is displayed, select ‘White Bal’ by using the Function Setup button so that the arrow indicates ‘White Bal’ . 2. Select a desired mode using the Function Setup button. MAIN SETUP 1. LENS 2. EXPOSURE 䯝 3. WHITE BAL 4. BACKLIGHT 5. SSNR3 DC ATW OFF ON ö Select one of the following 5 modes, as appropriate for your purpose.
g he on The SCB-3003 is designed so that it delivers a distinctive subject and background at the same time, even when the subject is in backlight, by adopting a function of the proprietary SV-V DSP chip. 1. When the SETUP menu screen is displayed, select ‘BACKLIGHT’ by using the Function Setup button. so that the arrow indicates ‘BACKLIGHT’. 2. Select a desired mode using the Function Setup button depending on the camera purpose. MAIN SETUP 1. LENS 2. EXPOSURE 3. WHITE BAL 䯝 4. BACKLIGHT 5.
camera operation y SSDR (Samsung Super Dynamic Range) : SSDR illuminates darker areas of an image while SSDR SETUP retaining the same light level for brighter areas IIIIIIIIIIIÂIIIIIIIIII to even out the overall brightness of images with 䯝 1. LEVEL high contrast between bright and dark areas. Press SET to Return Use the Function Setup button to change the SSDR level in the sub menu according to the contrast between bright and dark areas.
M Because there can be a difference in the effectiveness of HLC according to the amount of light area in the screen, optimize the installation angle for the best HLC performance. When dark, the HLC is only activated when a bright light exceeding a specific size. (In NIGHT ONLY mode). mode). Using the WDR function, select the shutter mode can be either fixed or A.FLK in the DC and Video lens. And in the manual lens, select the shutter mode can be only ESC.
camera operation DAY/NIGHT You can display pictures in color or in black and white. 1. When the SETUP menu screen is displayed, select ‘DAY/NIGHT’ by using the Function Setup button so that the arrow indicates ‘DAY/NIGHT’. 2. Select a desired mode using the Function Setup button according to the picture display you want. MAIN SETUP 1. LENS 2. EXPOSURE 3. WHITE BAL 4. BACKLIGHT 5. SSNR3 䯝 6. DAY/NIGHT 7. PROFILE 8. SPECIAL 9.
1. When the SETUP menu screen is displayed, select ‘PROFILE’ by using the Function Setup button so that the arrow indicates ‘PROFILE’. MAIN SETUP 1. LENS 2. EXPOSURE 3. WHITE BAL 4. BACKLIGHT 5. SSNR3 6. DAY/NIGHT 䯝 7. PROFILE 8. SPECIAL 9. EXIT DC ATW OFF ON AUTO BASIC SAVE 2. Select a desired mode using the Function Setup button according to the picture display you want. y BASIC : The most common environment is set to meet.
SPECIAL 1. When the SETUP menu screen is displayed, select ‘SPECIAL’ by using the Function Setup button so that the arrow indicates ‘SPECIAL’. 2. Select a desired mode using the Function Setup button. MAIN SETUP 1. LENS 2. EXPOSURE 3. WHITE BAL 4. BACKLIGHT 5. SSNR3 6. DAY/NIGHT 7. PROFILE 䯝 8. SPECIAL 9. EXIT y IMAGE ADJ : DC ATW OFF ON AUTO BASIC SAVE SPECIAL 1) When the SPECIAL menu screen is 䯝 1. IMAGE ADJ 2. CAM TITLE displayed, select ‘IMAGE ADJ’ by using 3.
- VPS(Virtual Progressive Scan) : This is an advanced technology that reproduces a sharp progressive image. This is appropriate to high quality recording and file transfer via the Internet. • OFF : You don’t reverse the picture. • H-REV : You can flip the picture horizontally on the screen. • V-REV : You can flip the picture vertically on the screen. • HV-REV : You can flip the picture horizontally and vertically on the screen.
camera operation 3) Press the set button. 4) Use the Function Setup button to move to a desired letter and select the letter by pressing the set button. Repeat this to enter multiple letters. You can enter up to 15 letters. 5) Enter a title, move the cursor to ‘POS’ and press the set button. The entered title appears on the screen. Select the position to display the title on the screen by using the Function Setup button and press the set button.
r r r, - MOTION : Select motion types to detect. • OFF : Not being used. • DETECTION : Since the camera detects motion without any additional external sensor, you can monitor activity more efficient. INTELLIGENCE 䯝 1. MOTION 2. DETECT BOX 3. ALARM OUT 4. DETECT AREA 5. MASK AREA # 6. SENSITIVITY IIIIIIIIÂIIIIIIII 3 # 7. DETECT SIZE 8. RETURN IIIIIIIIÂIIIIIIIII 3 • TRACKING : Commands the camera to detect and trace a moving object. - FENCE : You can select up to 4 FENCE.
camera operation 2) AREA FENCE - SEL POS : Selects a position from AREA FENCE POS1 ~ POS4. 䯝 1. SEL POS POS1 - X POS / Y POS : Adjust the size # 2. X POS IIÂIIIIIIIIIIIIIIII 12 and position of the selected area 1 # 3. Y POS ÂIIIIIIIIIIIIIIIIII fence. 4. DIRECTION IN - DIRECTION 5. RETURN y IN : Detects objects entering the fenced area. y OUT : Detects objects exiting the fenced area y IN/OUT : Detects all objects entering and exiting the fenced area. - RETURN : Return to the TRACKING menu.
• RETURN : Select this to save the MASK AREA menu settings and return to the INTELLIGENCE menu. - SENSITIVITY : Set the sensitivity of the motion detection. When you adjust the lower level, the more sensitive. - RETURN : Return to the SPECIAL menu. y PRIVACY : Mask an area you want to hide on the screen. 1) When the SPECIAL menu screen is PRIVACY AREA SETUP displayed, press the set button so that 䯝 1. AREA AREA1 the arrow indicates ‘PRIVACY’. 2. MODE OFF 2) Set up the mode using the Function 3.
t camera operation y COMM ADJ (Communication Adjustment) : This function sets up the camera communication status when controlling the camera through an external control device. 1) When the SPECIAL menu screen is displayed, press the set button so that the arrow indicates ‘COMM ADJ’. COMM SETUP ÂIIIIIIIIIIIIIIIIIIIII 䯝 1. CAM ID 1 2. BAUD RATE 19200 3. UART MODE 8-N-1 4. RET PKT ENABLE OFF 5. DISP ID SAMSUNG-T 6. PROTOCOL 7. COAX ON 8. RETURN 2) Set up the mode using the Function Setup button.
a g Troubleshooting If you have trouble operating your camera, refer to the following table. If the guidelines do not enable you to solve the problem, contact an authorized technician. Problems Troubleshooting Nothing appears on the screen. y Check that the power cord and line connection between the camera and monitor are properly connected. y Check that you have properly connected BNC cable to the camera. y Check the type of lens. The image on the screen is dim.
specifications Specifications SCB-3003N SCB-3003P M Video Imaging Device 1/3 Super HAD CCD II (Double Scan) P Total Pixels 1,028(H) x 508(V) 1,028(H) x 596(V) Effective Pixels 976(H) x 494(V) 976(H) x 582(V) S ( Scanning System 2:1 Interlace Synchronization Internal / Line-Lock / Extern Frequency H : 15.734KHz / V : 59.94Hz Horizontal Resolution Color : 700 TV lines(ER mode). B/W : 700 TV lines D Min. Illumination Color : 0.1Lux @ F1.2, 0.0002 Lux (Sens-up, 512x) B/W : 0.01 Lux @ F1.
SCB-3003P Built-in Privacy Masking Off / On (12 programmable zones with polygonal masking) Sens-up (Frame Integration) 2x ~ 512x Gain Control Off / Low / High White Balance ATW / Outdoor / Indoor / Manual / AWC (1,700K° ~ 11,000K°) Electronic Shutter Speed 1/60 ~ 1/120,000 sec 1/50 ~ 1/120,000 sec Digital Zoom Off / On (1x ~ 16x) Reverse Off / H-Rev / V-Rev / HV-Rev Profile Basic, Day & Night, Backlight, ITS, Indoor, User VPS Off / On Intelligent Video Fixed_Moved, Fence, Tracking, Dete
Dimension Unit: mm 42_ specifications
MEMO
SALES NETWORK SAMSUNG TECHWIN CO., LTD. Samsungtechwin R&D Center, 701, Sampyeong-dong, Bundang-gu, Seongnam-si, Gyeonggi-do, Korea, 463-400 TEL : +82-70-7147-8740~60, FAX : +82-31-8018-3745 SAMSUNG TECHWIN AMERICA Inc. 100 Challenger Rd. Suite 700 Ridgefield Park, NJ 07660 Toll Free : +1-877-213-1222 Direct : +1-201-325-6920 Fax : +1-201-373-0124 www.samsungcctvusa.com www.samsungtechwin.com www.samsungsecurity.com SAMSUNG TECHWIN EUROPE LTD.