High Resolution Camera User Manual SCB-2005
␃ 㢜 ■ ■ High Resolution Camera User Manual Copyright © Samsung Techwin Co., Ltd. All rights reserved. Trademark is the registered logo of Samsung Techwin Co., Ltd. The name of this product is the registered trademark of Samsung Techwin Co., Ltd. Other trademarks mentioned in this manual are the registered trademark of their respective company. Restriction Samsung Techwin Co., Ltd shall reserve the copyright of this document.
⏥ Before operating the camera, confirm the camera model and correct input power voltage. To help you understand this manual thoroughly, we’ll introduce our model description.
Safety information CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol indicates that dangerous voltage consisting a risk of electric shock is present within this unit.
6. Do not place conductive objects (e.g. screwdrivers, coins, metal parts, etc.) or containers filled with water on top of the camera. doing so may cause personal injury due to fire, electric shock, or falling objects. 8. If any unusual smells or smoke come from the unit, stop using the product. in such case, immediately disconnect the power source and contact the service center. continued use in such a condition may cause fire or electric shock. 9.
Safety information fCC sTATemeNT This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions : 1) This device may not cause harmful interference, and 2) This device must accept any interference received including interference that may cause undesired operation. CAUTION This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of FCC Rules.
Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus Samsung Techwin cares for the environment at all product manufacturing stages to preserve the environment, and is taking a number of steps to provide customers with more environment-friendly products.The Eco mark represents Samsung Techwin’s will to create environment-friendly products, and indicates that the product satisfies the EU RoHS Directive.
Contents INTRODUCTION 9 10 11 Features What’s included Component names and Functions CONNECTION 13 15 15 16 Lens Connecting to Monitor Connecting to Power Using coaxial communications SETUP 18 18 Menu Configration Menu Setup 29 Troubleshooting 3 Specifications 32 Dimension 9 13 18 TROUBLESHOOTING 29 SPECIFICATIONS 30 8_ Contents
⮈ FEATURES ᄔ high Resolution By adopting a diagonal 6mm (1/3”) 520,000 pixel (NTSC), 610,000 pixel (PAL) SONY CCD, the camera produces clear picture quality with a horizontal resolution of 700TV lines(ER mode). y excellent sensitivity The built-in high sensitivity COLOR CCD produces a clear image. 0.1Lux (50IRE@F1.2) / 0.0002Lux (50IRE@F1.
Introduction WHAT’S INCLUDED Check if the following items are included in the product package.
COMPONENT NAMES AND FUNCTIONS Front ● INTRODUCTION ❶ ➌ ಲ y y ➍ ➋ ❶ Tripod Mounting Bracket Screw Hole : Used to fix the Tripod Mounting Bracket . The screw size : use this screw to fix the mounting bracket . 1/4” -20UNC(20THREAD) L : 4.5mm±0.2mm (ISO Standard), or 0.197” (ASA Standard) ➋ Mount Lens Adapter : Install this adapter to use a CS-Mount Lens. ➌ Back Focus Control Lever : Adjust focus by this Back Focus Control Lever. ➍ Auto Iris Lens Connector : Used to connect Auto Iris Lens plug.
Introduction Back ➏ ➐ ➎ VIDEO POWER ➑ ➏ ➐ ➎ ➑ CLASS 2 ONLY VIDEO POWER ➎ Power input terminal : Connects to the power appropriate to each model. ➏ Video OUT Terminal : Sends video signal and connects to the video input terminal of the monitor. ➐ Power LED : This lamp is lit when the camera is receiving power normally.
Connection Lens The lens is not supplied with this camera. Purchase a lens suitable for your environment. This camera accepts the auto iris lens and both C and CS-mount lens. lens is used. Keep the lens surface clean, if it becomes contaminated with dirt or fingerprints the picture quality suffers. When Using Auto Iris Lens 1. Remove the protective cover from the front of the camera, and fasten the auto iris lens by turning it clockwise. 2.
Connection 2. Turn the C-Mount lens clockwise to install it. C-Mount Adapter 3. Set focus of camera using Back Focus Control Lever of camera side after combining C-Mount lens. Note that C-Mount adaptor is not supplied with camera. When Install a CS-Mount lens Remove the protective cover from the front of the camera, and turn the CS-Mount lens clockwise to install it. And set focus of camera using Back Focus Control Lever of camera side after combining CS-Mount lens.
CONNECTING TO MONITOR ಲ Connect the Video OUT port on the rear panel of the camera to a monitor. ㎫ VIDEO ● CONNECTION CLASS 2 ONLY POWER Monitor Camera As the connecting method varies with the instruments, refer to the manual supplied y with the instrument. Only connect the cable when the power is turned off. y CONNECTING TO POWER ಲ Since power specifications differ depending on the model, make sure to check your model name and specifications before connecting power.
Connection SCB-2005D For DC power • Since SCB-2005D the power specification support DC, connect DC 12V, 500mA Adaptor. VIDEO POWER Power When the resistance value of copper wire is at [20°C(68°F)] #24(0.22mm2) #22(0.33mm2) #20(0.52mm2) #18(0.83mm2) Resistance (Ω/m) 0.078 0.050 0.030 0.018 Voltage Drop (V/m) 0.028 0.018 0.011 0.006 Copper wire size (AWG) • As shown in the table above, voltage decreases as the wire gets longer.
DVR SET MENU/ENTER CONTROLLER OSD KEY UP UP KEY JOYSTICK UP DOWN DOWN KEY JOYSTICK DOWN LEFT LEFT KEY JOYSTICK LEFT RIGHT RIGHT KEY JOYSTICK RIGHT DVR ALARM HDD NETWORK BACKUP REC REC 1 DVD RECORDER 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 OPEN/CLOSE ZOOM FREEZE BACKUP TELE WIDE VIEW MODE AUDIO ALRAM PRESET y y MENU USB MENU SEARCH MULTI REC MENU PRESET CAM MON GROUP PTZ 1 DVR %1& 56 TRACK MTX 2 3 SETUP 4 7 FUNC 5 8 ESC 9 E
Setup MENU CONFIGRATION mAIN seTUp leNs ● DC ● MANUAL expOsURe ● BRIGHTNESS ● SENS-UP ● SHUTTER ● RETURN ● AGC defOG ● OFF ● AUTO ● MANUAL WhITe bAl ● ATW ● MANUAL ● OUTDOOR ● AWC → SET ● INDOOR ● HLC bACKlIGhT ● Off ● USER BLC SSNR3 ● ON ● OFF dAy/NIGhT ● AUTO ● COLOR ● B/W speCIAl ● IMAGE ADJ ● MOTION DET ● SSDR ● CAM TITLE ● SYNC ● RETURN ● PRIVACY ● COAX exIT ● SAVE ● NOT SAVE ● RESET meNU seTUp Use the Function Setup switch within the camera.
㔤 Select the function using the Function Setup switch. ܓ DC OFF ATW OFF ON AUTO Change the status using the Function Setup switch. ● SETUP MAIN SETUP 䯝 1.LENS 2.EXPOSURE 3.DEFOG 4.WHITE BAL 5.BACKLIGHT 6.SSNR3 7.DAY/NIGHT 8.SPECIAL 9.EXIT SAVE 2. Select a desired function using the Function Setup switch. y Place the cursor over a desired item. 3. Set up a selected item by using the Function Setup switch. 4. To finish the setting, select ‘EXIT’ and press the Function Setup switch.
Setup EXPOSURE 1. When the SETUP menu screen is displayed, select EXPOSURE by using the Function Setup switch so that the arrow indicates 'EXPOSURE'. 2. Select a desired mode using the Function EXPOSURE SETUP Setup switch. 䯝 1.BRIGHTNESS IIIIIIIII*IIIIIIII 10 BRIGHTNESS : Adjusts the video brightness. －－－ 2.SHUTTER SHUTTER : You can select the shutter. 3.AGC MIDDLE - A.FLK : Select this when you experience 4.SENS-UP AUTO picture flicker, which can happen 5.
WHITE BAL (WHITE BALANCE) Use the White Balance function to adjust the screen color. 1. When the SETUP menu screen is displayed, select ‘White Bal’ by using the Function Setup switch so that the arrow indicates ‘White Bal’. ● SETUP 2. Select a desired mode using the Function Setup switch. ※ Select one of the following 5 modes, as appropriate for your purpose. y ATW : Select this when the color temperature is between 1,800°K and 10,500°K.
Setup 2. Select a desired mode using the Function Setup switch depending on the camera purpose. UseR blC : Enables a user to directly select a desired area from a picture, and to view the area more clearly. - LEVEL : Adjust level of the BLC function. - TOP/BOTTOM/LEFT/RIGHT : Adjust the area to be enhanced. HlC (High light Compensation) : This function masks the strong light to minimize white out due to over exposure and preserve much of the on-screen details when the camera aims a strong light source.
DAY/ NIGHT AUTO SETUP - BURST MODE : You can turn on or off the ▶1.BURST MODE burst signal on B/W mode. 2.COLORB/W - DURATION : You can select the brightness DURATION level at which the camera switches from day DWELL TIME to night mode. 3.B/WCOLOR - DWELL TIME : You can select the duration DURATION DWELL TIME time about changing the day/night mode. 4.RETURN →3s, 5s, 7s, 10s, 15s, 20s, 30s, 40s, 60s ON FAST 5 SEC FAST 10 SEC COlOR : The picture is always displayed in color.
Setup IMAGE ADJ 1) When the SPECIAL menu screen is displayed, select ‘IMAGE ADJ’ by using the Function Setup switch so that the arrow indicates ’IMAGE ADJ‘. 2) Select a desired mode using the Function Setup switch. IMAGE SETUP ▶ 1.MONITOR LCD 2.REVERSE OFF 3.SHARPNESS ON ENGLISH 4.LANGUAGE 5.RETURN - monitor : Please change the settings value LCD MONITOR of video appropriate to your monitor. ▶ 1. GAMMA 0.55 LCD: Please select this menu item when IIIIIIIII*IIIIIIIIIIII 45 2.
CAm TITle : If you enter a title, the title will appear on the monitor. 4 Use the Function Setup switch to move to a desired letter and select the letter by pressing the switch. Repeat this to enter multiple letters. You can enter up to 15 letters. Move the cursor to ↑ for entering a space, then press the Function Setup switch, the cursor will skip to the next. 5 Enter a title, move the cursor to ’POS’ and press the Function Setup switch. The entered title appears on the screen.
Setup pRIVACy : Mask an area you want to hide on the screen. 1 When the SPECIAL menu screen is displPRIVACY AREA SETUP ayed, press the Function Setup switch so AREA1 ▶ 1.AREA that the arrow indicates ‘PRIVACY’. 2.MODE OFF 2 Set up the mode using the Function Setup 3.MASK COLOR WHITE switch. 4.SEL POS LEFT - AREA : You can select up to 8 PRIVACY areas. *IIIIIIIIIIIIIIIIIIIIIIIIII 9 5.POS - MODE : Determines whether to use the area 6.RETURN selected. - MASK COLOR : Determine area color.
SYNC ▶ PHASE *IIIIIIIIIIIIIIIIIIIII 0 Press SET to Return ● SETUP syNC : In areas where the supply is at 60Hz(NTSC), 50Hz(PAL), you can synchronize the output phase of multiple cameras using the power synchronization function (Line-Lock) without using a synchronization signal generator. - INT: Internal Synchronization Type - L/L : Power Synchronization Type, Line-lock Press the Function Setup switch. You can select a desired phase from 0 to 359 when select ‘phase’.
Setup EXIT Select a desired EXIT mode using the Function Setup switch depending on the camera purpose. sAVe : Save the current settings and exit the MAIN SETUP menu. NOT sAVe : Do not save the current settings and exit the MAIN SETUP menu. ReseT : Resets the camera settings to the factory defaults. Monitor, Language and COAX settings are not initialized.
Troubleshooting TROUBLESHOOTING If you have trouble operating your camera, refer to the following table. If the guidelines do not enable you to solve the problem, contact an authorized technician. SOLUTION Nothing appears on the screen. ▶ Check that the power cord and line connection between the camera and monitor are fixed properly. ▶ Check that you have properly connected VIDEO cable to the camera VIDEO output jack. The image on the screen is dim.
Specifications މ SPECIFICATIONS 6&% 1' 6&% 1 6&% 3' 6&% 3 Video Imaging Device 1/3’’ Super HAD CCD II (Double Scan) Total Pixels 1020(H) x 508(V) 1020(H) x 596(V) Effective Pixels 976(H) x 494(V) 976(H) x 582(V) Scanning System 2:1 Interlace Internal / Line Lock Internal Synchronization Internal Frequency H : 15.734KHz / V : 59.94Hz Internal / Line Lock H : 15.625KHz / V : 50Hz Horizontal Resolution 700 TV lines(ER Mode) Min. Illumination 0.1Lux (50IRE@F1.2) / 0.
6&% 1' Gain Control 6&% 1 6&% 3' 6&% 3 Off / Low / Middle / High Electronic Shutter Speed 1/60 ~ 1/120,000 sec 1/50 ~ 1/120,000 sec ATW / Outdoor / Indoor / Manual / AWC → SET (1,800K° ~10,500K°) Reverse OFF / H-REV Communication Coaxial Control ( SPC-300 Compatible ) Protocol Coax : Pelco-C ( Coaxitron ) Environmental Operating Temperature -10°C ~ +55°C (+14°F ~ +131°F) / Less than 90% RH / Humidity Electrical Electrical Input Voltage DC 12V±10% Current 0.
Specifications DIMENSION Unit: mm 32_ Specifications
SALES NETWORK SAMSUNG TECHWIN CO., LTD. Samsungtechwin R&D Center, 701, Sampyeong-dong, Bundang-gu, Seongnam-si, Gyeonggi-do, Korea, 463-400 TEL : +82-70-7147-8740~60, FAX : +82-31-8018-3745 SAMSUNG TECHWIN AMERICA Inc. 100 Challenger Rd. Suite 700 Ridgefield Park, NJ 07660 Toll Free : +1-877-213-1222 Direct : +1-201-325-6920 Fax : +1-201-373-0124 www.samsungcctvusa.com www.samsungtechwin.com www.samsungsecurity.com SAMSUNG TECHWIN EUROPE LTD.
