User manual

English _93
PictBridge menu
Setting the date/time imprint option
Touch the Menu ( ) tab

“Date/Time”

“Off,” “Date,” “Time,” or “Date & Time”

Return ( ) tab.
To print using the DPOF setting
If the printer is compatible with DPOF, you can use the DPOF setting.

page 91
• If the printer is not recognized, or to print again after direct printing with a PictBridge
printer, remove the USB cable, select “PictBridge” in the menu again, and then
reconnect the cable.
• The date/time imprint option may not be supported by all printers. Check with your
printer manufacturer. The “Date/Time” menu cannot be setup if the printer does
not support this option.
• PictBridge™ is a registered trademark of CIPA (Camera & Imaging Products
Association), an image transfer standard developed by Canon, Fuji, HP, Olympus,
Seiko Epson, and Sony.
• Use the USB cable provided with the HD camcorder.
• Use the AC power adaptor for your HD camcorder during PictBridge direct printing.
Turning your HD camcorder off during printing might damage data on the storage
media.
• Movie images are not available for printing.
• You can set various printing options depending on the printer. Please refer to the
user manual of the printer for details.
• Do not remove USB cable or memory card during printing.
• You may not print photo images recorded on other devices.
• If the printer is not recognized, or to print again after direct printing with a PictBridge
Off
Date
Time
Date & Time
Date/Time
1 / 1
Date/Time
1 / 1
80
Min