Contact SAMSUNG WORLDWIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. Country Customer Care Center Web Site Address CANADA 1-800-SAMSUNG(726-7864) www.samsung.com/ca Samsung Electronics Canada Inc., Customer Service 55 Standish Court Mississauga, Ontario L5R 4B2 Canada U.S.A 1-800-SAMSUNG(726-7864) www.samsung.com/us Samsung Electronics America, Inc.
Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance. Product design and specifications may be changed without notice. Important Warranty Information Regarding Television Format Viewing ✎✎ See the warranty card for more information on warranty terms. Wide screen format PDP Displays (16:9, the aspect ratio of the screen width to height) are primarily designed to view wide screen format full-motion video.
Contents Getting Started yy yy yy yy yy yy yy yy Setup Menu............................................................. 18 List of Features.......................................................... 4 Accessories............................................................... 4 Install the Stand......................................................... 5 Viewing the Control Panel.......................................... 6 Remote Control Buttons............................................
Getting Started List of Features yy Excellent Digital Interface & Networking: With a built-in HD digital tuner, nonsubscription HD broadcasts can be viewed without a cable box / STB (Set-Top-Box) satellite receiver. yy SRS TruSurround HD provides a virtual surround system (p. 17). yy Media Play: Allows you to play music files, pictures saved on a USB device (p. 23). yy Self Diagnosis: You can check to make sure picture and sound operate normally (p. 22).
01 Getting Started Install the Stand See separate guide for installing the stand. x4 (M4 X L12) x4 (M4 X L8) Stand (1EA) Guide Stand (1EA) Screws (8EA) Follow the steps below to connect the TV to the stand. Top View x4 (M4 X L12) Front Rear ATTENTION DO NOT USE DO NOT USE DO NOT USE CHEMICALS GREASE OIL 1. Connect the Guide Stand to the Stand using four screws (M4 X L12) as shown. (Correct assembly) (Incorret assembly) x4 (M4 X L8) 2. With your TV upright, connect the TV to the Stand. 3.
Getting Started Viewing the Control Panel ✎✎The product color and shape may vary depending on the model. Power Indicator Remote control sensor Speakers Power Indicator Remote control sensor Blinks and turns off when the power is on and lights up in standby mode. Aim the remote control towards this spot on the TV. P (Power) SOURCEE Turns the TV on or off. Toggles between all the available input sources. In the on-screen menu, use this button as you would use the ENTERE button on the remote control.
Displays and selects the available video sources (p. 12). Turns the TV on and off. 01 Getting Started Remote Control Buttons Press to directly access channels. Press to select additional digital channels (digital) being broadcasted by the same station. For example, to select channel “54-3”, press “54”, then press “–” and “3”. Returns to the previous channel. Cuts off the sound temporarily. Changes channels. Adjusts the volume. Displays the channel list on the screen (p. 13). Brings up the OSD.
Getting Started Connecting to an Antenna or Cable Connection When the TV is initially powered on, basic settings proceed automatically. ✎✎Connecting the power cord and an antenna or cable connection. ✎✎The PDP device may interfere with an amateur radio or AM radio. ✎✎When you move or swivel the TV with Antenna cable tightly connected, there is high risk antenna jack on TV will be broken off.
Connections 02 Connections Connecting to an AV Device Using an HDMI or HDMI/DVI cable: HD connection (up to 720p/1080i) We recommend using the HDMI connection for the best quality HD picture. Available devices: DVD player, Blu-ray player, HD cable box, HD STB (Set-Top-Box) satellite receiver.
Connections Connecting to an Audio Device Using an Optical (Digital) Cable Connection Available devices: Digital Audio System, Amplifier, DVD home theater Digital Audio System OPTICAL Optical Cable (Not Supplied) ✎✎DIGITAL AUDIO OUT (OPTICAL) xx When you connect a Digital Audio System to the DIGITAL AUDIO OUT (OPTICAL) jack, decrease the volume of both the TV and the system. xx 5.1 CH (channel) audio is available when you connect the TV to an external device supporting 5.1 CH.
02 Connections Connecting to a PC Using an HDMI/DVI Cable Audio Cable (Not Supplied) AUDIO OUT DVI OUT HDMI to DVI Cable (Not Supplied) ✎✎Your PC may not support an HDMI connection.
Changing the Input Source Edit Name OO MENUm → Input → Edit Name → ENTERE Source List Use to select TV or an external input sources such as a DVD player / Blu-ray player / cable box / STB satellite receiver. SOURCE OO MENUm → Input → Source List → ENTERE In the Source, press the TOOLS button, and then you can set an external input sources name you want.
¦¦ Using Favorite Channels OO MENUm → Channel → Channel List → ENTERE ¦¦ Seeing Channels Add to Favorite / Delete from Favorite Channel List t The Channel List contains the channels your TV displays (added channels) when you press the Channel button on your remote. On the Channel List, you can view Added Channels, channel information, and Favorites, and manage channels.
Basic Features ✎✎NOTE xx When selecting the Cable TV system: STD, HRC and IRC identify various types of cable TV systems. Contact your local cable company to identify the type of cable system that exists in your particular area. At this point, the signal source has been selected. xx After all the available channels are stored, it starts to remove scrambled channels. The Auto Program menu then reappears. ¦¦ Editing Channels OO MENUm → Channel → Channel List → ENTERE Channel Name Edit 1.
✎✎ This deletes the highlighted or selected program(s). ■■ Information: Display a show you have reserved to watch. (You can also change the reservation Information.) ✎✎ Alternatively, you can view Information by highlighting a program and pressing the ENTERE button. ■■ Select All / Deselect All: Select or deselect all reserved programs.
Basic Features ■■ Color Space (Auto / Native): Adjust the range of colors available to create the image. ■■ White Balance: Adjust the color temperature for a more natural picture. R-Offset / G-Offset / B-Offset: Adjust each color’s (red, green, blue) darkness. R-Gain / G-Gain / B-Gain: Adjust each color’s (red, green, blue) brightness. Reset: Resets the White Balance to it’s default settings. ■■ Flesh Tone: Emphasize pink “Flesh Tone.” ■■ Edge Enhancement (Off / On): Emphasize object boundaries.
✎✎ Available only in HDMI mode. ■■ Film Mode (Off / Auto): Sets the TV so that it senses automatically and then process film signals from all sources and adjusts the picture for optimum quality. ✎✎ Available in TV, AV, COMPONENT (480i / 1080i) and HDMI (480i / 1080i). ■■ Screen Burn Protection: To reduce the possibility of screen burn, this unit is equipped with screen burn prevention technology. The Time setting allows you to program the time between movement of the picture in minutes.
Basic Features Preferred Language (digital channels only) Use the up and down arrow keys to select a language, and then press ENTER. Digital-TV broadcasts can simultaneously transmit many audio tracks (for example, simultaneous translations of the program into foreign languages). Sound Reset (Reset All / Reset Sound Mode / Cancel) MTS ■■ Reset All: Restore all sound settings to the factory defaults. ■■ Reset Sound Mode: Returns all sound values in the currently selected mode to the default settings.
OO MENUm → Setup → Time → Sleep Timer → ENTERE ■■ Sleep Timer: Automatically shuts off the TV after a preset period of time. (30, 60, 90, 120, 150 and 180 minutes). SLEEP ✎✎ To cancel the Sleep Timer, select Off. Repeat: Select Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or Manual to set at you convenience. If you select Manual, you can set up the day you want to activate the timer. The c mark indicates the day is selected.
Basic Features MPAA Rating: You can block movies depending on their MPAA rating. The Motion Picture Association of America(MPAA) has implemented a rating system that provides parents or guardians with advanced information on which films are appropriate for children. –– G: General audience (no restrictions). / PG: Parental guidance suggested. / PG-13: Parents strongly cautioned. / R: Restricted. Children under 17 should be accompanied by an adult. / NC-17: No children under age 17. / X: Adults only.
OO MENUm → Setup → ENTERE The Eco Function can be used to enhance your power savings. Energy Saving (Off / Low / Medium / High) This adjusts the brightness of the TV in order to reduce power consumption. Until the screen turns on again, a distorted picture will be displayed for about 4 seconds. Eco Sensor (Off / On) Eco Sensor detects surrounding light intensity using an optical sensor and adjusts the screen’s brightness. ■■ Eco Sensor (Off / On): Turns the sensor off or on.
Basic Features ✎✎ NOTE xx Digital Caption Options are available only when you can select Default and Service1 ~ Service6 in Caption Mode. xx The availability of captions depends on the program being broadcast. xx The Default setting follows the standards set by the broadcaster. xx You cannot set the Foreground and Background to the same color. xx The Foreground and Background cannot be set to have the same color.
Advanced Features MEDIA.P Enjoy photos and/or music files saved on a USB Mass Storage Class (MSC) device. USB Device Name O 04 Advanced Features Media Play SUM 315.0MB/495.0MB Free MENUm → Application → Media Play (USB) → ENTERE E Enter e Exit ¦ Connecting a USB Device USBTV Side Panel 1. Turn on your TV. 2. Connect a USB device containing photo and/or music files to the USB jack on the side of the TV. Photo SUM 307.2MB/973.7MB 3.
Advanced Features xx Only MP3 and JPEG file formats are supported. xx The Media Play (USB) mp3 format only supports music files with a high sampling frequency (32 kHz, 44.1 kHz, or 48 kHz). xx We recommend the sequential jpeg format. USB xx Do not disconnect the USB device while it is loading. xx MSC supports MP3 and JPEG files, and the PTP device supports JPEG files only. xx MTP (Media Transfer Protocol) is not supported.
USB Photo Photo DSC_0558.JPG 580 * 440 78.0KB Using the MP3 List 03 / 14 Folder icon Music list icon Setup File.....jpg Photo SUM 307.2MB/973.7MB SUM 307.2MB/973.7MB File.....jpg File.....jpg Music File.....jpg File.....jpg File.....jpg File.....jpg File.....jpg File.....jpg File.....jpg File.....jpg SUM 307.2MB/973.7MB File.....jpg File.....jpg Move to the previous folder stage icon ✎✎ The selected file is displayed on the top with itsSetup playing time. Photo Music 1.
2 / 31 01-The Way.mp3 00:03:25 02-Run To Me.mp3 00:03:25 03-No More Sad Songs.mp3 00:03:25 04-Interference-gold.mp3 SUM 307.2MB/973.7MB 00:03:25 05-marketa_irglova-The_hill.mp3 00:03:25 06-I Will Carry You.mp3 00:03:25 07-marketa_irglova.mp3 00:03:25 08-Super World.mp3 00:03:25 Advanced Features Setup Using the Setup Menu ■■ Slide Show speed: Select to control the slide show speed. You can select Fast, Normal or Slow.
xx You must connect an Anynet+ device using an HDMI cable. Some HDMI cables may not support Anynet+ functions. xx Anynet+ works when the AV device supporting Anynet+ is in the standby or on status. xx Anynet+ supports up to 12 AV devices in total. Note that you can connect up to 3 devices of the same type. xx However, you can connect only one Home Theater. Anynet+ Menu The Anynet+ menu changes depending on the type and status of the Anynet+ devices connected to the TV.
Advanced Features ¦¦ Switching between Anynet+ Devices 1. Anynet+ devices connected to the TV are listed. ✎✎ If you cannot find a device you want, press the Red button to refresh the list. 2. Select a device, and then press the ENTERE button. You can switch to the selected device. ✎✎ The Device List menu appears only when you set Anynet+ (HDMI-CEC) to On in the System menu. xx Switching to the selected device may take up to 2 minutes. You cannot cancel the operation during the switching operation.
Problem Possible Solution Anynet+ does not work. • • • • • • • • I want to start Anynet+. • Check if the Anynet+ device is properly connected to the TV and check if the Anynet+ (HDMI-CEC) is set to On in the Anynet+ Setup menu. • Press the TOOLS button to display the Anynet+ menu and select a menu you want. I want to exit Anynet+. • Select View TV in the Anynet+ menu. • Press the SOURCE button on the TV remote control and select a non- Anynet+ device. • Press z, PRE-CH to change the TV mode.
Other Information Installing the Wall Mount Attaching the Blanking Bracket When installing the TV onto a wall, attach the Blanking Bracket as shown. Installing the Wall Mount Kit The wall mount kit (sold separately) allows you to mount the TV on the wall. For detailed information on installing the wall mount, see the instructions provided with the wall mount. Contact a technician for assistance when installing the wall mount bracket.
VESA scew hole specs (A * B) in millimeters 42~50 400 X 400 58~63 600 X 400 70~79 800 X 400 80~ 1400 X 800 Standard Screw Quantity M8 4 PDP TV 05 Other Information Product Family TV size in inches ✎✎ Unscrew the hole around before installing Wall-Mount on the wall. Do not install your Wall Mount Kit while your TV is turned on. It may result in personal injury due to electric shock.
Other Information Securing the TV to the Wall Caution: Pulling, pushing, or climbing on the TV may cause the TV to fall. In particular, ensure your children do not hang over or destabilize the TV. Doing so may cause the TV to tip over, causing serious injuries or death. Follow all safety precautions provided in the included Safety Flyer with your TV. For added stability and safety, you can purchase and install the anti fall device as described below.
If the TV seems to have a problem, first review this list of possible problems and solution. Also review the Troubleshooting Section in the e-Manual. If none of the troubleshooting tips apply, visit www.samsung.com/support or call Samsung customer Service at 1-800-SAMSUNG(1-800-726-7864).
Other Information Issues Solutions and Explanations Poor picture First of all, please perform the Picture Test and confirm that your TV is properly displaying the test image. (go to MENU - Support - Self Diagnosis - Picture Test) (p. 22) If the test image is properly displayed, the poor picture may be caused by the source or signal. The TV image does not look as good as it did in the store. • If you have an analog cable/satellite box, upgrade to an HD digital set top box.
Solutions and Explanations No Picture, No Video The TV won’t turn on. • Make sure the AC power cord is securely plugged in to the wall outlet and the TV. • Make sure the wall outlet is working. • Try pressing the POWER button on the TV to make sure the problem is not the remote. If the TV turns on, refer to “Remote control does not work” below. The TV turns off automatically. • • • • There is no picture/video.
Other Information Issues Solutions and Explanations Image Retention (Burn In) Issue. • To minimize the possibility of screen burn, this unit is equipped with screen burn reduction technology. Pixel Shift technology enables you to set picture movement up/down (Vertical Line) and side to side (Horizontal Dot). The cable/set top box remote control doesn’t turn the TV on or off, or adjust the volume. • Program the Cable/Set remote control to operate the TV.
05 Other Information License TruSurround HD, SRS and symbol are trademarks of SRS Labs, Inc. TruSurround HD technology is incorporated under license from SRS Labs, Inc. Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. Open Source License Notice In the case of using open source software, Open Source Licenses are available on the product menu. Open source used in this product can be found on the following webpage ( http://opensource.
Other Information Dimensions ■■ Front view / Side view 7 1 2 5 3 6 4 8 (Unit: inches) Model name PN43D430 / PN43D440 / PN43D450 PN51D430 / PN51D440 / PN51D450 1 39.8 46.8 2 37.6 44.6 3 21.6 25.0 4 20.1 20.1 5 24.5 27.8 6 27.5 30.8 7 2.2 2.2 8 9.7 9.7 ■■ Jack panel detail / Rear view 5 6 1 2 4 3 (Unit: inches) Model name PN43D430 / PN43D440 / PN43D450 PN51D430 / PN51D440 / PN51D450 1 15.7 15.7 2 3.7 3.9 3 3.4 4.7 4 29.6 36.2 5 15.7 15.7 6 16.7 18.
A F Antenna Anynet+ Auto Volume 13 26 18 B Background Music Balance L/R Batteries Black Tone Blanking Bracket Brightness 26 17 7 15 30 15 C Change PIN Channel Menu Clock Color Tone Component Connecting to a PC Connecting to an Audio Device 20 13 18 16 9 11 10 D DIGITAL AUDIO OUT Dynamic Dynamic Contrast 10, 27 15 15 E Eco Sensor Edit Name Editing Channels Energy Saving Equalizer External Speaker Film Mode Fine Tune Flesh Tone Frequency R 17 15 16 11 H HDMI Home Theater 9, 26 10, 26 31 L Lang
This page is intentionally left blank. 40 English [PD430-ZA]BN68-03325D-01Eng.
