LFD DISPLAY User Manual MD32C MD40C MD46C MD55C The color and the appearance may differ depending on the product, and the specifications are subject to change without prior notice to improve the performance.
Table of contents Before Using the Product Copyright 7 Safety Precautions Symbols Cleaning Storage Electricity and Safety Installation Operation 8 8 8 9 9 10 12 Installing the Wall Mount Kit Wall Mount Kit Specifications (VESA) 28 28 Remote Control (RS232C) Cable Connection Connection Control Codes 30 30 33 34 Checking the Contents Removing the Packaging (for MD32C MD40C and MD46C models only) Removing the Packaging (for MD55C models only) Checking the Components 15 Parts Control Panel Anti-theft
Table of contents Other Functions Group Management Schedule Management Troubleshooting Guide 84 85 87 89 Screen Adjustment Picture Mode If the input source is PC, DVI If the input source is AV, Component, HDMI 91 91 91 Backlight / Contrast / Brightness / Sharpness / Colour / Tint (G/R) 92 Screen Adjustment Picture Size Position Zoom/Position PC Screen Adjustm Resolution Select 93 93 95 95 96 96 Auto Adjustment 97 Rotation 97 Aspect Ratio 98 Advanced Settings Dynamic Contrast Black Tone Flesh T
Table of contents System Multi Control Configuring settings for Multi Control 117 117 Time Clock Set Sleep Timer On Timer Off Timer Holiday Management 118 118 118 119 120 120 Menu Language 121 Rotate menu 122 Eco Solution Energy Saving Eco Sensor No Signal Power Off Auto Power Off 123 123 123 123 123 Security Safety Lock Button Lock Change PIN 124 124 124 124 PIP 125 Auto Protection Time 126 Screen Burn Protection Pixel Shift Timer Immediate display Side Grey 127 127 128 129 129 Ticker 13
Table of contents AllShare Play MagicInfo Lite MagicInfo Videowall S What is AllShare Play? 148 Read the following before using AllShare Play with a USB device 148 Using a USB device 150 Connecting to a PC over a network 151 Using the AllShare Play features 152 File Formats Compatible with MagicInfo Lite player Read before using MagicInfo Lite player 164 164 Approving a connected device from the server 169 MagicInfo Lite MagicInfo Lite player Local Schedule Manager Content manager Settings When Cont
Table of contents Appendix Contact SAMSUNG WORLD WIDE 235 Responsibility for the Pay Service (Cost to Customers) Not a product defect A Product damage caused by customer's fault Others 244 244 244 244 WEEE 245 Correct Disposal of This Product (Waste Electrical & Electronic Equipment) 245 Correct disposal of batteries in this product 245 Optimum Picture Quality and Afterimage Burnin Prevention 246 Optimum Picture Quality 246 Prevention of Afterimage Burn-in 247 Licence 249 Terminology 250 6
Chapter 01 Before Using the Product Copyright The contents of this manual are subject to change without notice to improve quality. © 2013 Samsung Electronics Samsung Electronics owns the copyright for this manual. Use or reproduction of this manual in parts or entirety without the authorization of Samsung Electronics is prohibited. Microsoft, Windows are registered trademarks of Microsoft Corporation. VESA, DPM and DDC are registered trademarks of the Video Electronics Standards Association.
Safety Precautions Cleaning ――Exercise care when cleaning as the panel and exterior of advanced LCDs are easily scratched. Caution ――Take the following steps when cleaning. ――The following images are for reference only. Real-life situations may differ from what is shown in the images. RISK OF ELECTRIC SHOCK DO NOT OPEN Caution : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER. (OR BACK) THERE ARE NO USER SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO QUALIFIED PERSONNEL.
Storage Connect the power plug to a grounded power socket (type 1 insulated devices only). Due to the characteristics of high-glossy products, using a UV humidifier nearby may create whitecoloured stains on the product. ――Contact Customer Service Centre if the inside of the product needs cleaning (service fee will be •• An electric shock or injury may result. ! Do not bend or pull the power cord with force. Be careful not to leave the power cord under a heavy object. charged).
Installation Caution Do not disconnect the power cord while the product is being used. •• The product may become damaged by an electric shock. Warning DO NOT PLACE CANDLES, INSECT REPELLANTS OR CIGARETTES ON TOP OF THE PRODUCT. DO NOT INSTALL THE PRODUCT NEAR HEAT SOURCES. •• A fire may result. Only use the power cord provided with your product by Samsung. Do not use the power cord with other products. •• A fire or electric shock may result. Have a technician install the wall-mount hanger.
Do not install the product on an unstable or vibrating surface (insecure shelf, sloped surface, etc.) Caution •• The product may fall and become damaged and/or cause an injury. Do not drop the product while moving. •• Using the product in an area with excess vibration may damage the product or cause a fire. Do not install the product in a vehicle or a place exposed to dust, moisture (water drips, etc.), oil, or smoke. •• Product failure or personal injury may result.
Operation Do not leave heavy objects or items that children like (toys, sweets, etc.) on top of the product. •• The product or heavy objects may fall as children try to reach for the toys or sweets resulting in a serious injury. Warning There is a high voltage inside the product. Never disassemble, repair or modify the product yourself. During a lightning or thunderstorm, power off the product and remove the power cable. •• A fire or electric shock may result. •• A fire or electric shock may result.
Do not use or keep combustible spray or an inflammable substance near the product. Caution •• An explosion or fire may result. Leaving the screen fixed on a stationary image for an extended period of time may cause afterimage burn-in or defective pixels. ! Ensure the vents are not blocked by tablecloths or curtains. •• Activate power-saving mode or a moving-picture screen saver if you will not be using the product for an extended period of time.
Rest your eyes for more than 5 minutes for every 1 hour of product use. Be careful that children do not place the battery in their mouths when removed from the remote control. Place the battery in a location that children or infants cannot reach. •• Eye fatigue will be relieved. •• If children have had the battery in their mouths, consult your doctor immediately. ! Do not touch the screen when the product has been turned on for an extended period of time as it will become hot.
Chapter 02 Preparations Checking the Contents 2 Remove the styrofoam from the product. 3 Check the product and remove the styrofoam and plastic bag. Removing the Packaging (for MD32C MD40C and MD46C models only) ――The following images are for reference only. Real-life situations may differ from what is shown in the images. 1 Remove the black locking device at the bottom of the box. ――The appearance of the actual product may differ from the image shown. ――This image is for reference only.
Removing the Packaging (for MD55C models only) 2 Using the grooves in the box, lift and remove the top of the box. 3 Check the components and remove the styrofoam and plastic bag. ――The following images are for reference only. Real-life situations may differ from what is shown in the images. 1 Remove the black locking device at the bottom of the box. 1 2 3 ――The appearance of actual components may differ from the image shown.
Checking the Components -- Contact the vendor where you purchased the product if any components are missing. Components ――Components may differ in different locations. -- The appearance of the components and items sold separately may differ from the image shown. Warranty card Quick setup guide (Not available in some locations) User manual MagicInfo Lite Edition Software CD Power cord D-SUB cable (P.44) - + - -- A stand is not provided with the product.
Items sold separately -- The following items can be purchased at your nearest retailer. Wall-mount Kit Stand RS232C-Stereo cable (P.56) DVI cable (P.44) HDMI-DVI cable (P.45) HDMI cable (P.45) Video cable (P.48) Component cable (P.48) RCA stereo cable (P.50) RCA cable (P.48) AV/Component adapter (P.48) Stereo cable RS232C(IN) adapter RS232C(OUT) adapter LAN cable -- The RS232C adapter can be used to connect to another monitor using the D-SUB (9-pin) type RS232C cable.
――The colour and shape of parts may differ from what is shown. Specifications are subject to change without notice to Parts improve quality. Panel Key Control Panel Buttons Description Power on the product. If you press the button when the product is turned on, the control menu will be displayed. ――To exit the OSD menu, press and hold the panel key for at least one second. ON Move to the upper or lower menu. You can also adjust the value of an option. Move to the left or right menu.
――If you press the button on the panel key (P.19) when the product is turned on, the control menu will be displayed. Buttons Description Select the connected input source. Control menu Source Move the panel key right to select Source in the control menu. When the list of input sources is displayed, move the panel key up or down to select the desired input source. Next, press the panel key. Display the OSD menu.
Reverse Side Port ――The colour and shape of parts may differ from what is shown. Specifications are RS232C IN subject to change without notice to improve quality. Description Connects to MDC using an RS232C-stereo adapter. RS232C OUT AUDIO OUT Connects to the audio of a source device. RGB / DVI / HDMI / AV / COMPONENT / AUDIO IN Receives sound from a PC via an audio cable. USB Connect to a USB memory device. HDMI IN Connects to a source device using an HDMI cable.
Anti-theft Lock ――An anti-theft lock allows you to use the product securely even in public places. ――The locking device shape and locking method depend on the manufacturer. Refer to the user guide provided with your anti-theft locking device for details. ――Stand: Sold separately To lock an anti-theft locking device: 1 Fix the cable of your anti-theft locking device to a heavy object such as a desk. 2 Put one end of the cable through the loop on the other end.
Remote Control ――Using other display devices in the same space as the remote control of this product can cause the other display devices to be inadvertently controlled. OFF Power on the product. .QZ ABC DEF GHI JKL MNO PRS TUV WXY DEL-/-- SYMBOL MUTE 1 4 7 Adjust the volume. Change the input source. MagicInfo Lite, MagicInfo Premium S, MagicInfo Videowall S Launch Button. The buttons can vary according to the Play Mode settings.
Quickly select frequently used functions. TOOLS INFO Display information about the current input source. Move to the upper, lower, left or right menu, or adjust an option's setting. Confirm a menu selection. Return to the previous menu. MagicInfo Quick Launch Button. This button is disabled for products that do not support MagicInfo. MagicInfo can only be enabled when a network box is connected. RETURN EXIT PC DVI HDMI DP A B C D MagicInfo 3D LOCK Exit the current menu.
Adjusting the OSD with the Remote Control Description 1 Open the OSD menu. 2 Select from Picture, Sound, Network, System or Support in the displayed OSD menu screen. 7m ~ 10m Buttons Remote Control Reception Range 3 4 30˚ 30˚ Change settings as desired. Finish setting. Use the remote control within 7m to 10m from the sensor on the product at an angle of 30 from the left and right. ――Store used batteries out of reach of children and recycle. ――Do not use a new and used battery together.
Before Installing the Product (Installation Guide) To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the installation instructions. •• Ensure that an authorized installation company installs the wall mount. •• Otherwise, it may fall and cause personal injury. •• Make sure to install the specified wall mount. 15 ˚ Tilting Angle and Rotation ――Contact Samsung Customer Service Centre for further details.
Figure 1.3 Side view Installation on an Indented Wall ――Contact Samsung Customer Service Centre for further details. B D D Plane view A Minimum 40 mm B Minimum 70 mm A C Minimum 50 mm D Minimum 50 mm E Ambient temperature: Under 35 C ――When installing the product on an indented wall, allow at least the space specified above between the product and wall for ventilation and ensure that the ambient temperature is kept below 35 C. C E Figure 1.
Installing the Wall Mount Installing the Wall Mount Kit The wall mount kit (sold separately) allows you to mount the product on the wall. For detailed information on installing the wall mount, see the instructions provided with the wall mount. We recommend you contact a technician for assistance when installing the wall mount bracket. Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if you elect to install the wall mount on your own.
Unit: mm (inches) Model name VESA screw hole specs (A * B) in millimeters Standard Screw Quantity MD32C 200 × 200 / 7.9 × 7.9 M6 MD40C 4 MD46C 400 × 400 / 15.7 × 15.7 M8 MD55C ――Do not install your Wall Mount Kit while your product is turned on. It may result in personal injury due to electric shock.
Remote Control (RS232C) •• Pin assignment 1 2 3 4 5 Cable Connection RS232C Cable Interface RS232C (9 pins) Pin TxD (No.2), RxD (No.3), GND (No.
LAN Cable •• RS232C cable Connector: 9-Pin D-Sub to Stereo Cable 9 •• Pin assignment 3 2 1 5 1 2 3 4 5 6 7 8 -P2- 6 -P1- 1 -P1Female -P1- -P2- -P2- Rx 2 --------> 3 Tx STEREO Tx 3 <-------- 2 Rx PLUG Gnd 5 ---------- 5 Gnd (3.
Cross LAN cable (PC to PC) •• Connector : RJ45 Direct LAN cable (PC to HUB) HUB P1 P2 Signal P1 P2 Signal TX+ 1 <--------> 3 RX+ RJ45 P2 RJ45 P1 P1 P2 RJ45 MDC P2 Signal TX- 2 <--------> 6 RX- <--------> 1 TX+ RX+ 3 <--------> 1 TX+ 2 <--------> 2 TX- RX- 6 <--------> 2 TX- RX+ 3 <--------> 3 RX+ RX- 6 <--------> 6 RX- Signal P1 TX+ 1 TX- 32
Connection •• Connection 2 •• Connection 1 RJ45 IN RS232C OUT IN RS232C OUT IN RS232C OUT IN RS232C RJ45 OUT •• Connection 3 RJ45 RS232C OUT IN RS232C OUT IN RS232C OUT IN RS232C OUT 33
No. Control Codes Viewing control state (Get control command) Header Command 0xAA Command type ID Data length Command 0xAA Command type Command type 10 Video Wall On 0x84 0~1 11 Video Wall User Control 0x89 - E.g. Power On & ID=0 Data length Data 1 Value Checksum Command No. Value range •• All communications take place in hexadecimals. The checksum is calculated by adding up all values except the header.
Power control Volume control •• Function A product can be powered on and off using a PC. •• Function The volume of a product can be adjusted using a PC.
――MagicInfo is only available with models that contain the MagicInfo function. Input source control ――RF(TV), DTV are only available with models that include a TV. •• Function The input source of a product can be changed using a PC.
Screen mode control •• Nak •• Function The screen mode of a product can be changed using a PC. Screen mode cannot be controlled when the Video Wall function is enabled. ――This control can only be used on models that include a TV.
PIP On/Off control Auto adjustment control (PC and BNC only) •• Function The PIP mode of a product can be turned on or off using a PC. •• Function Automatically adjust the PC system screen using a PC. ――Only available on models that have the PIP function. ――The mode cannot be controlled if Video Wall is set to On. •• Viewing auto adjustment state (Get Auto Adjustment Status) None ――This function is not available in MagicInfo.
Video Wall Mode Control Safety Lock •• Function Video Wall mode can be activated on a product using a PC. •• Function PC can be used to turn the Safety Lock function on or off on a product. This control is only available on a product whose Video Wall is enabled. This control is available regardless of whether or not the power is turned on.
Video Wall On •• Nak •• Function Turn Video Wall on or off on the product from your computer. Header Command 0xAA 0xFF ID Data length Ack/Nak r-CMD Val1 3 'N' 0x84 ERR Checksum •• Get Video Wall On/Off Status Header Command 0xAA 0x84 ID Data length "ERR": A code showing what error has occurred Checksum Video Wall User Control 0 •• Function Turn the Video Wall function on or off on the product from your computer.
10x10 Video Wall Model 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Off 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 1 0x11 0x12 0x13 0x14 0x15 0x16 0x17 0x18 0x19 0x1A 0x1B 0x1C 0x1D 0x1E 0x1F 2 0x21 0x22 0x23 0x24 0x25 0x26 0x27 0x28 0x29 0x2A 0x2B 0x2C 0x2D 0x2E 0x2F 3 0x31 0x32 0x33 0x34 0x35 0x36 0x37 0x38 0x39 0x3A 0x3B 0x3C 0x3D 0x3E 0x3F 4 0x41 0x42 0x43 0x44 0x45 0x46 0x47 0x48 0x49 0x4A 0
10x10 Video Wall Model : ( 1 ~ 100) Set Number Data 1 0x01 2 0x02 ... ...
Chapter 03 Connecting and Using a Source Device Before Connecting Check the following before you connect this product with other devices. Devices that can be connected to this product include PCs, camcorders, speakers, set top boxes and DVD/Blu-ray Disc players. Pre-connection Checkpoints ――Before connecting a source device, read the user manual provided with it. The number and locations of ports on source devices may differ from device to device.
Connecting to a PC •• Do not connect the power cable before connecting all other cables. Ensure you connect a source device first before connecting the power cable. •• A PC can be connected to the product in a variety of ways. Select a connection method suitable for your PC. ――Connecting parts may differ in different products.
Connection Using an HDMI-DVI Cable Connection Using an HDMI Cable ――When you connect a PC to the product using an HDMI-DVI cable, set Edit Name to DVI PC to access video and audio content stored on the PC.
Changing the Resolution ――Adjust the resolution and refresh rate in Control Panel on your PC to obtain optimum picture quality. ――The picture quality of TFT-LCDs may degrade if the optimum resolution is not selected. Changing the Resolution on Windows XP Go to Control Panel Display Settings, and change the resolution. Changing the Resolution on Windows Vista Go to Control Panel Personal Settings Display Settings, and change the resolution.
Changing the Resolution on Windows 7 Go to Control Panel Display Screen Resolution, and change the resolution. Changing the Resolution on Windows 8 Go to Settings Control Panel Display Screen Resolution, and change the resolution.
Connecting to a Video Device •• Do not connect the power cable before connecting all other cables. Ensure you connect a source device first before connecting the power cable. •• You can connect a video device to the product using a cable. ――Connecting parts may differ in different products. ――Press the SOURCE button on the remote control to change the source.
Connection Using an HDMI-DVI Cable ――Audio will not be enabled if the product is connected to a video device using an HDMI-DVI cable. To resolve this, additionally connect an audio cable to the audio ports on the product and video device. When you connect a video device to the product using an HDMI-DVI cable, set Edit Name to DVI Devices to access video and audio content stored on the video device. ――Supported resolutions include 1080p (50/60Hz), 720p (50/60Hz), 480p, and 576p.
Connecting to an Audio System ――Connecting parts may differ in different products.
Connecting the network box (Sold separately) ――For details on how to connect to a network box, refer to the user's manual provided with the network box upon purchase. MagicInfo To use MagicInfo, a network box (sold separately) must be connected to the product. ――To change the MagicInfo settings, run "MagicinfoSetupWizard" on the desktop. ――For details on how to use MagicInfo, refer to the DVD provided with the network box.
4 MagicInfo Setup Wizard - v.1.12 Enter the IP information. MagicInfo Setup Wizard - v.1.12 6 Select a display mode. 7 Double-check the settings you have Select Screen Type - step 4 Select TCP/IP - step 2 Obtain an IP address automatically Landscape Use the following IP address: IP address: 192 . 168 . 0 . 102 Subnet mask: 255 . 255 . 255 . 0 Default gateway: 192 . 168 . 0 . 1 Portrait Obtain DNS server address automatically Use the following DNS server address: Preferred DNS server: 10 .
Changing the Input source Source allows you to select a variety of sources and change source device names. Source ――The screen may not display correctly if an incorrect source is selected for the source device you want to convert to. You can display the screen of a source device connected to the product. Select a source from source list to display the screen of the selected source. ――The input source can also be changed by using the SOURCE button on the remote control.
Chapter 04 Using MDC Configuring Settings for Multi Control MENUm→ System → Multi Control → ENTERE Assign an individual ID to your product. Configuring settings for Multi Control •• ID Setup Assign an ID to a set. (Range: 0~99) Press ▲/▼ to select a number, and press E. •• ID Input Enter the ID number of the product connected to the input cable for input signal reception. Enter the number you want using the number buttons on the remote control.
MDC Programmeme Installation/Uninstallation Installation MDC installation can be affected by the graphics card, mother board and network conditions. If a software installation window is not displayed on the main screen, install with the MDC Unified execution file in the MDC folder on the CD. If the directory path is not specified, the programme will be installed in the default directory path. Select "Launch MDC Unified" and click "Finish" to run the MDC programme immediately.
What is MDC? Multiple display control "MDC" is an application that allows you to easily control multiple display devices simultaneously using a PC. Connecting to MDC Using MDC via RS-232C (serial data communications standards) An RS-232C serial cable must be connected to the serial ports on the PC and monitor.
Using MDC via Ethernet Enter the IP for the primary display device and connect the device to the PC. One display device can connect to another using an RS-232C serial cable. Connection using a direct LAN cable ――Multiple products can be connected using the RJ45 port on the product and the LAN ports on the HUB.
Connection using a cross LAN cable ――Multiple products can be connected using the RS232C IN / OUT port on the product.
Connection Management Connection management includes the Connection list and Connection list modification options. Connection list - Connection list shows the details of the connections such as connection setting (IP/COM, Port No, MAC, and Connection Type), connection status, Set ID Range, and detected devices. Each connection can contain a maximum of 100 devices connected in serial daisy-chain fashion.
User Login Launching the programme displays the user login window. The initial login ID (password: admin) and password (Auto Login: admin) are set to admin. ――After logging in for the first time, make sure to change the password to ensure security. ――To change the password, go to Home > User Settings. After you are logged in, [User Login : admin] appears at the right bottom of the programme. To log in automatically when the programme restarts, select the Auto Login checkbox in the User Login window.
Auto Set ID Auto Set ID feature assigns a Set ID for all the LFDs connected in daisy-chain of a selected connection. There can be a maximum of 100 LFDs in a connection. The Set ID is assigned sequentially in the daisychain running from 1 to 99, and then finally to Set ID 0. ――ID for the last 100th LFD is set to 0.
Cloning Using the Cloning feature, you can copy the setting of one LFD and apply it to multiple selected LFDs. You can select specific tab categories or all tab categories for cloning, using the copy setting option window. ――To delete the settings you have configured, click the Paste Settings button.
Command Retry This feature is used to specify the maximum number of times the MDC command will be retried in case of there being no reply or a corrupted reply from an LFD. The retry count value can be set using the MDC options window. The retry count value must be between 1-10. The default value is 1.
Getting Started with MDC 1 To start the programme, click Start → Programmes → Samsung → MDC Unified. The login window appears after the MDC programme is launched. Enter the user ID and password. •• The default user ID and password are admin. •• Make sure to change the password after the first login. 2 Click Add to add a display device. SET ID Range: Select a range of the unique ID assigned to a monitor. -- If the connection is established via RS232C, go to Serial and specify the COM Port.
Main Screen Layout 1 6 1 Menu Bar Change the status of a display device or the properties of the programme. 2 Device Category View a list of connected display devices or device groups. 3 Schedule Category View a list of schedules for display devices. 4 Set List Select the display device you want to adjust. 2 5 Modify the Set List Add, edit, regroup or delete sets. 3 6 Help Topics Display help topics for the programme.
――The volume can be changed or the sound can be muted only for displays that are turned on. Volume Volume •• Adjust the volume of a selected display. 2 Alert 3 •• The volume can be adjusted using the slider bar in the range of 0 to 100. Mute •• Enable or disable Mute for a selected display. Mute will automatically be disabled if Volume is adjusted when Mute is on.
User Login User Settings •• Add, delete or edit login information. Logout •• Log out from the current user account as follows. •• Click Logout. The message "Do you want to log admin out?" is displayed •• Click Yes. The user login window appears. •• If you do not want to log in, click Close. The programme is closed. ――If you close the programme using Logout, the login window will appear prompting you to enter user information even if the Auto Login checkbox is selected.
Color Color •• Adjust the colours for the selected display device. Tint (G/R) •• Adjust the tint for the selected display device. Color Tone •• Adjust the background colour tone for the selected display device. Color Temp. -- Color and Tint (G/R) are not available if the input source is PC. -- Color, Tint (G/R), Color Tone and Color Temp. are not available if both PC Source and Video Source are selected. Options •• Adjust the colour temperature for the selected display device.
MPEG Noise Filter Reduces MPEG noise to provide improved picture quality. •• Off / Low / Medium / High / Auto Smart LED Controls the LED backlight to maximize picture clarity. Cinema Black In Movie mode, this feature dims the top and bottom areas of the video image to provide a more immersive viewing experience. •• Off: Turns off the Cinema Black feature. •• On: Adjusts the dimming of the top and bottom areas of the screen according to the video.
Advanced features 3D Mode Select the 3D input format. 3D L/R Change Swap the left and right pictures. 3D → 2D Displays the image for the left eye only. 3D Auto View 3D Control If you set 3D Auto View to Message Notice, a pop up message window appears when the product receives a 3D signal. 3D Optimization The overall adjustment of 3D effect. 3D Expert Pattern View a 3D pattern. 3D Effect Adjust 3D effects like perspective and depth for your preferred 3D viewing experience.
Advanced Settings Dynamic Contrast Adjust the screen contrast. Gamma Control Adjust the primary colour intensity. RGB Only Mode Displays the Red, Green and Blue colour for making fine adjustments to the hue and saturation. Flesh Tone Emphasize pink “Flesh Tone.” Motion Lighting Reduces power consumption by reducing screen brightness when the picture on the screen is in motion. LED Motion Plus Removes blur and judder from scenes with larger amounts of rapid movement to provide a clearer picture.
Sound Adjustment You can change the sound settings. Choose display devices from the list of sets, and select the Sound tab. Bass •• Adjust the bass for the selected display. Treble •• Adjust the treble for the selected display. -- The Bass or Treble item will be disabled if the item is not supported by the selected set. Balance(L/R) •• Adjust the volume of the left and right speakers of the selected display device. SRS TS XT •• Enable or disable the SRS TS XT effect for the selected display device.
Format H •• Select the format to display the split screen. •• Select the number of horizontal display devices. •• A maximum of 15 displays can be arranged in a row. ――A maximum of 6 can be assigned to V if 15 is assigned to H. V •• Select the number of vertical display devices. •• A maximum of 15 displays can be arranged in a row. ――A maximum of 6 can be assigned to H if 15 is assigned to V.
General User Auto Color •• Automatically adjust the screen colours. ――Available only in PC mode. Auto Power •• Set the product to automatically power on. Standby Control •• Set the standby mode to activate if an input source is not detected. Fan & Temperature Configure the settings required to detect the fan speed and internal temperature for the product's protection. Fan Control •• Select a method to configure the fan speed. Fan Speed Setting •• Configure the fan speed.
Security Safety Lock •• Lock the on-screen menus. ――To unlock the menus, set Safety Lock to Off. Button Lock •• Lock the buttons on the display device. ――To unlock the buttons, set Button Lock to Off. OSD Display Source OSD •• Select whether to display a message when the Source is changed. Not Optimum Mode OSD •• Select whether to display a message when a non-compatible mode is selected. No Signal OSD •• Select whether to display a message when there is no input signal.
Time Clock Set Change the current time on the selected display device according to the time set on a PC. If the time is not set on the display device, null values will be displayed. Timer On Timer •• Repeat: Specify the period for which you want to repeat the selected Timer. Once, EveryDay, Mon~Fri, Mon~Sat, Sat~Sun, Manual •• Holiday Apply: The Holiday Management settings can be applied to the Timer. •• On Time: Set the time to power on the selected display device.
Holiday Management Holiday Management allows you to prevent devices that are set to be powered on by the Timer from turning on at a specified date. ――The Holiday Management function can be enabled or disabled in the Timer settings menu. •• Add: You can specify holidays. Click the Add button in the Holiday Management window. •• Delete: Delete holidays. check the corresponding checkboxes and click this button. •• List of holidays: View a list of holidays you have added.
Screen Saver This function prevents screen burn-in when the screen of the selected display device is left idle for an extended period of time. Timer: You can set the timer for Screen Saver. •• Off •• Repeat: Display the image retention-preventive pattern set in Mode at specified time intervals (Period). •• Interval: Display the image retention-preventive pattern set in Mode for a specified period of time (from Start Time to End Time). •• Mode: Select a screen protective pattern to display.
Safety Screen The Safety Screen function can be used to prevent screen burn-in when a stationary image displays on the screen of a display device for an extended period of time. Lamp Control Lamp Control is used to adjust the backlight to reduce power consumption. Automatically adjust the backlight of the selected display device at a specified time. If Manual Lamp Control is adjusted, Auto Lamp Control will automatically switch to Off. Manually adjust the backlight for the selected display.
Ticker Input text while a video or image is displayed and display the text on the screen. Ticker Enable or disable Ticker. •• Off / On Message Enter a message to display on the screen. Timer Set the Start Time and End Time to display a message (Message). Position Select an orientation to display a message (Message) from Horizontal and Vertical. Motion Specify the Direction and Speed to display a message (Message).
Tool Settings •• Panel Control: Turn on or off the screen of a display device. •• Remote Control: Enable or disable the remote control. Security Reset •• Reset Picture: Reset the screen settings. •• Reset Sound: Reset the sound settings. •• Reset System: Reset the system settings. •• Reset All: Reset the screen, sound and system settings at the same time.
Edit Column Options Configure the settings for the items that will be displayed on the list of displays. •• Language: Select a language to use in the MDC programme. After selecting a language, restart the MDC programme to use the selected language. •• Command Retry Count: Specify the number of retry attempts when a command fails. •• Error Status Interval: Specify the time interval to query the display device in order to check if "Fault Device" has occurred.
Monitor Window A window appears showing details for data transfer between the computer and display devices. •• Filter Information View the programme information.
Other Functions Resizing a Window Place the mouse pointer on a corner of the programme window. An arrow will appear. Move the arrow to customize the size of the programme window.
Group Management Create groups and manage the list of sets on a group basis. ――Duplicate group names cannot be used. Creating Groups 1 Right-click and select Group 2 In the Edit Group window displayed, click Add on the same level or Add on the sub level. Edit in the display device list section on the left side of the programme window. •• Add on the same level: Create a group on the same level as the selected group.
•• Add on the sub level: Create a sub-group under the selected group. Deleting Groups 3 Enter the group name. 1 Select a group name, and click Edit. 2 In the Edit Group window displayed, click Delete. 3 Click Yes. The group will be deleted.
Renaming Groups 1 Select a group name, and click Edit. 2 In the Edit Group window displayed, click Rename. 3 If a cursor appears in the old group name, enter a new group name. Rename Schedule Management Creating Schedules Create and register a schedule on a group basis. 1 Click All Schedule List in the schedule section on the left side of the programme window. The Add button will be enabled in the middle.
2 Click the Add button. The Add Schedule window will appear. 3 Click Add below the Device Group item, and select the group you want to add a schedule to. 4 Select Date&Time/Action and click OK. The schedule will be added and a list of schedules will appear in the set list window. -- Device Group: Select a group. -- Date&Time Instant Execution: Run the schedule immediately. Timer: Set the date, time and interval to run the schedule.
Troubleshooting Guide -- This programme may malfunction sometimes due to a communication problem between the PC and display or electromagnetic waves emitted from nearby electronic devices. Issue The display you want to control does not appear on the system information chart. Solution 1 Check the connection of the RS232C cable (check that the cable is properly connected to appropriate serial port). 2 Check that another display with a duplicate ID is not connected.
How display properties are shown when multiple displays are used 1 When no display is selected: The default value is displayed. 2 When one display is selected: Settings for the selected display are displayed. 3 When two displays are selected (e.g. in sequence of ID 1 and ID 3): The settings for ID 1 are displayed before the settings for ID 3. 4 When the All+Select checkbox is checked and all displays are selected: The default settings are displayed.
Chapter 05 Screen Adjustment Configure the Picture settings (Backlight, Colour Tone, etc.). -- The layout of the Picture menu options may vary depending on the product. Picture Mode If the input source is PC, DVI •• Information: This mode reduces eye fatigue and is suitable for displaying information to the public. MENUm → Picture → Picture Mode → ENTERE •• Advertisement: This mode is suitable for displaying video content and indoor/outdoor advertisements.
Backlight / Contrast / Brightness / Sharpness / Colour / Tint (G/R) MENUm → Picture → ENTERE Your product has several options for adjusting picture quality.
Screen Adjustment choose size and aspect ratio picture displayed on screen. MENUm → Picture → Screen Adjustment → ENTERE •• Zoom1: Use for moderate magnification. Cuts off the top and sides. 16:9 •• Zoom2: Use for a stronger magnification. •• Smart View 1: Reduces the 16:9 picture by 50%. ――Smart View 1 is enabled only in HDMI mode. · Zoom/Position PC Screen Adjustment Resolution Select ――Different Screen Adjustment options are displayed depending on the current input source.
Picture Sizes available by Input Source.
Position Adjusts the picture position. Position is only available if Picture Size is set to Zoom1, Zoom2, Wide Fit, Screen Fit or Custom. ――To use the Position function after selecting Zoom1, Zoom2, Wide Fit or Screen Fit, follow these steps. Screen Adjustment Picture Size Zoom1 · Position 1 Press the ▼ button to select Position. Press the E button. 2 Press the ▲ or ▼ button to move the picture up or down. 3 Press the E button.
PC Screen Adjustm •• Coarse / Fine Removes or reduces picture noise. If the noise is not removed by Fine-tuning alone, use the Coarse function to adjust the frequency as best as possible (Coarse) and Fine-tune again. After the noise has been reduced, re-adjust the picture so that it is aligned with the Centre of screen. Screen Adjustment Picture Size Custom · Zoom/Position •• Position To adjust the PC’s screen position if it is not Centreed or does not fit the product screen.
Auto Adjustment Adjust frequency values/positions and fine tune the settings automatically. MENUm → Picture → Auto Adjustment → ENTERE Picture Auto Adjustment -- Available in PC mode only. -- The displayed image may differ depending on the model. Rotation Rotate the product screen orientation. •• Landscape: Display the screen in landscape mode (default). MENUm → Picture → Rotation → ENTERE •• Portrait: Display the screen in portrait mode. ――Available in PC/DVI/HDMI/MagicInfo mode.
Aspect Ratio Set the rotated screen to be either full screen or original. •• Full Screen: Display the rotated screen in full screen. MENUm → Picture → Aspect Ratio → ENTERE •• Original: Display the rotated screen in the original aspect ratio. ――Available only when Rotation is set to Portrait. Picture Rotation · Aspect Ratio Portrait Full Screen -- The displayed image may differ depending on the model.
Advanced Settings Input Source MENUm → Picture → Advanced Settings → ENTERE Advanced Settings Dynamic Contrast Medium Black Tone Off Flesh Tone 0 RGB Only Mode Colour Space PC, DVI, HDMI (when a PC is connected) Picture Mode Information White Balance / Gamma Advertisement Dynamic Contrast / Black Tone / Flesh Tone / Colour Space / White Balance / Gamma AV, Component, HDMI Natural, Dynamic Not available AV Standard Dynamic Contrast / Black Tone / Flesh Tone / RGB Only Mode / Colour Space
Dynamic Contrast Advanced Settings Dynamic Contrast Medium Black Tone Off Flesh Tone 0 RGB Only Mode Colour Space Off Native White Balance 10p White Balance Off Adjust the screen contrast. •• Off / Low / Medium / High Black Tone Select the black level to adjust the screen depth. •• Off / Dark / Darker / Darkest Flesh Tone Emphasize pink Flesh Tone. RGB Only Mode Displays the Red, Green and Blue colour for making fine adjustments to the hue and saturation.
White Balance Advanced Settings Adjust the colour temperature for a more natural picture. •• R-Offset / G-Offset / B-Offset: Adjust each colour’s (red, green, blue) darkness. White Balance 10p White Balance Gamma Motion Lighting •• R-Gain / G-Gain / B-Gain: Adjust each colour’s (red, green, blue) brightness. Off 0 Off •• Reset: Resets the White Balance to its default settings. 10p White Balance Controls the white balance in 10 point interval by adjusting the red, green, and blue brightness.
Picture Options Select an option using the ▲ and ▼ arrow keys, and the press E. MENUm → Picture → Picture Options → ENTERE Input source Use the arrow keys to change the setting, and then press E. PC, DVI Picture Options Colour Tone Standard Colour Temp. 10000K Digital Noise Filter Off MPEG Noise Filter Off HDMI Black Level Normal Film Mode Off Motion Plus Off -- The displayed image may differ depending on the model. Picture Mode Picture Options Information Colour Tone / Colour Temp.
Colour Tone Picture Options Colour Tone 10000K Colour Temp. Off Digital Noise Filter Off MPEG Noise Filter If the input source is PC, DVI or HDMI (PC connection). •• Off / Cool / Standard / Warm If the input source is AV, Component, HDMI. •• Off / Cool / Standard / Warm1 / Warm2 ――Warm1 or Warm2 will be deactivated when the Picture Mode is Dynamic. ――Settings can be adjusted and stored for each external device connected to an input on the product. Colour Temp.
HDMI Black Level Picture Options HDMI Black Level Normal Selects the black level on the screen to adjust the screen depth. •• Normal / Low ――Available only in HDMI and DVI mode (AV Timing : 480p, 576p, 720p, 1080i, 1080p). Film Mode Off Motion Plus Off Film Mode Dynamic Backlight Off This mode is suitable to view movies. Sets the product to automatically sense and process film signals from all sources and adjust the picture for optimum quality.
Dynamic Backlight Picture Options HDMI Black Level Normal Film Mode Off Motion Plus Off Dynamic Backlight Off Automatically adjust the backlight to provide the best possible screen contrast under the current conditions. •• Off / On ――The Dynamic Backlight is not available when the input source is set to PC, AV Component while Video Wall is On. -- The displayed image may differ depending on the model. Reset Picture Resets your current picture mode to its default settings.
Chapter 06 Sound Adjustment Configure the sound (Sound) settings for the product. Sound Mode You can select a sound mode to suit your personal preferences. •• Standard: Selects the normal sound mode. MENUm → Sound → Sound Mode → ENTERE •• Movie: Provides the best sound for movies. •• Clear Voice: Emphasizes voices over other sounds. Sound Sound Mode •• Music: Emphasizes music over voices.
Sound Effect Configure your preferred sound effect for output sound. ――If Speaker Select is set to External, Sound Effect is disabled. MENUm → Sound → Sound Effect → ENTERE Sound Sound Mode Standard Sound Effect Speaker Settings Reset Sound ――Available only when Sound Mode is set to Standard. •• Virtual Surround (Off / On) This function provides a virtual 5.1 channel surround sound experience through a pair of speakers using HRTF(Head Related Transfer Function) technology.
Speaker Settings MENUm → Sound → Speaker Settings → ENTERE ――When you set Speaker Select to External, the products speakers are turned off. You will hear sound through the external speakers only. When the Speaker Select is set to Internal, both the product speakers and the external speakers are on. You will hear sound through both.
Reset Sound Reset all sound settings to the factory defaults. MENUm → Sound → Reset Sound → ENTERE Sound Sound Mode Standard Sound Effect Speaker Settings Reset Sound -- The displayed image may differ depending on the model.
Chapter 07 Network Network Settings Connecting to a Wired Network There are three ways to attach your product to your LAN using cable. MENU m → Network → Network Settings → ENTER E Network Settings •• You can attach your product to your LAN by connecting the LAN port on the back of your product to an external modem using a LAN cable. See the diagram below. LAN No network cable or Samsung Wireless LAN Adapter connected. Please plug in a network cable or a Samsung Wireless LAN Adapter.
•• Depending on how your network is configured, you may be able to attach your product to your LAN by connecting the LAN port on the back of your product directly to a network wall outlet using a LAN cable. See the diagram below. Note that the wall outlet is attached to a modem or router elsewhere in your house. LAN The LAN Port on the Wall RJ45 Wired Network Settings Set the network connection to use Internet services such as perform software upgrades.
3 On the dialog that appears, click the Support tab. Connecting to a Wireless Network 4 On the Support Tab, click the Details button. The Network connection values are displayed. To connect your product to your network wireless, you need a wireless router or modem and a Samsung Wireless LAN adapter (WIS10ABGN, WIS12ABGNX) , which you connect to your product back or side panel USB port. See the illustration below. How to set up manually 1 Go to the Network Settings screen.
――If your router, modem, or device is not certified, it may not connect to the product via the “Samsung Wireless LAN adapter”. 4 have security, go to step 7. ――Ensure the product is turned on before you connect the “Samsung Wireless LAN adapter”. ――Connection Methods: You can setup the wireless network connection in three ways.
10 How to set up manually 1 Go to the Network Settings screen. Select Start, press E. 2 The Network function searches for available wireless networks. When done, it displays a list of the appears and the verification process starts. 11 In the list of networks, press the or button to select a network, and then press the E button twice.
Network Status Wi-Fi Direct MENU m → Network → Network Status → ENTER E MENU m → Network → Wi-Fi Direct → ENTER E You can check the current network and Internet status. Set to connect the product to wireless mobile devices. Using this function, you can connect wireless mobile devices with your product directly without a router. ――To use this function, your mobile device should be supported by the Wi-Fi Direct. Network Status Your wireless network and Internet connection are setup and ready to use.
Soft AP AllShare Settings MENU m → Network → Soft AP → ENTER E MENU m → Network → AllShare Settings → ENTER E Using this function, you can connect the product on your mobile devices if your mobile devices do not support Wi-Fi Direct. Set the options for connection of Wi-Fi device. Shows a list of mobile phones or connected devices which have been set up to use the AllShare Play function with this product. •• Soft AP Turns on or off the Soft AP.
Chapter 08 System Multi Control Configuring settings for Multi Control •• ID Setup Assign an ID to a set. (Range: 0~99) MENUm → System → Multi Control → ENTERE Press ▲ or ▼ to select a number, and press E. Multi Control •• ID Input Enter the ID number of the product connected to the input cable for input signal reception. ID Setup 00 ID Input -- MDC Connection RS232C MDC Enter the number you want using the number buttons on the remote control.
Time You can configure Clock Set or Sleep Timer. You can also set the product to automatically turn on or off at a specified time using the Timer function. MENUm → System → Time → ENTERE Clock Set Set the clock to use the various various timer features of the product. Time •• Clock Set Set the Date and Time. Clock Set Sleep Timer Off 끄기 On Timer Off Timer Holiday Management Select Clock Set. Select Date or Time, and then press E.
Time On Timer Set On Timer so that your product turns on automatically at a time and on a day of your choosing. On Timer The power is turned on with the specified volume or input source. Off Timer On Timer: Set the on timer by making a selection from one of the seven options. Ensure you set the current time first. Holiday Management (On Timer1 ~ On Timer7) ――You must set the clock before you can use On Timer. •• Setup: Select Off, Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or Manual.
Time On Timer Off Timer Holiday Management Off Timer Set the off timer (Off Timer) by making a selection from one of the seven options. (Off Timer1 ~ Off Timer7) ――You must set the clock before you can use Off Timer. •• Setup: Select Off, Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or Manual. If you select Manual, you can choose the days you want Off Timer to turn off your product. ――The check mark indicates days you’ve selected. •• Time: Set the hour and minute.
Menu Language Set the menu language. ――A change to the language setting will only be applied to the onscreen menu display. It will not be applied to other functions on your PC. MENUm → System → Menu Language → ENTERE System Time Menu Language Rotate menu English Landscape Eco Solution -- The displayed image may differ depending on the model.
Rotate menu Configure the menu screen. •• Landscape: Display the menu in landscape mode (default). MENUm → System → Rotate menu → ENTERE •• Portrait: Display the menu in portrait mode on the right side of the product screen. ――Available in PC/DVI/HDMI/MagicInfo mode. System Time Menu Language Rotate menu English Landscape Eco Solution -- The displayed image may differ depending on the model.
Eco Solution Energy Saving Reduce the power consumption by adjusting the screen brightness. MENUm → System → Eco Solution → ENTERE Selecting Picture Off switches off the screen. The volume is not disabled. To switch the screen on, press any button other than the volume button. Eco Solution •• Off / Low / Medium / High / Picture Off Energy Saving Off Eco Sensor Eco Sensor Off To enhance your power savings, the picture settings will automatically adapt to the light in the room.
Security Every time you access the Security functions, the PIN screen will appear and the default PIN number is "0-0-0-0" (default password: 0 - 0 - 0 - 0). MENUm → System → Security → ENTERE Safety Lock It sets safe lock function. Security •• Off / On Safety Lock Off All the menus and buttons of the product and remote control, except for the LOCK button on the remote control, will be locked by the Safety Lock function.
PIP PIP Settings The picture from the external video source will be in the main screen and the picture from the product will be in the PIP subpicture screen. MENUm → System → PIP → ENTERE Main picture System PIP Off Auto Protection Time Off Screen Burn Protection Ticker Off Video Wall PC AV AV PC, DVI, HDMI HDMI, DVI, AV MagicInfo Lite PC, DVI, AV, Component, HDMI •• PIP (Off / On): Activate or deactivate the PIP function. •• Source: You can select a source of the sub picture.
Auto Protection Time If the screen displays a still image for a certain period of time you define, the product activates the screen saver to prevent the formation of burnt in ghost images on the screen. •• Off / 2 hours / 4 hours / 8 hours / 10 hours MENUm → System → Auto Protection Time → ENTERE System Auto Protection Time Off Screen Burn Protection Ticker Off Video Wall Source AutoSwitch Settings -- The displayed image may differ depending on the model.
Screen Burn Protection To reduce the possibility of screen burn, this unit is equipped with Pixel Shift screen burn prevention technology. Pixel Shift moves the picture slightly on the screen. MENUm → System → Screen Burn Protection → ENTERE The Pixel Shift Time setting allows you to programme the time between movements of the picture in minutes. Pixel Shift Screen Burn Protection Minimize image retention by finely moving pixels horizontally or vertically.
Timer Screen Burn Protection Pixel Shift Off Timer Off Immediate display Off Side Grey Off You can set the timer for Screen Burn Protection. The Pixel Shift feature stops automatically after a specified period of time. Timer •• Off •• Repeat: Display the image retention-preventive pattern set in Mode at specified time intervals(Period). •• Interval: Display the image retention-preventive pattern set in Mode for a specified period of time (from Start Time to End Time).
Immediate display Screen Burn Protection Pixel Shift Off Timer Off Immediate display Off Side Grey Off Select the screen saver you want to display immediately. •• Off / Pixel / Rolling bar / Fading screen Side Grey When the screen is set to 4:3 aspect ratio, adjust the brightness of white margins on sides to protect the screen. •• Off / Light / Dark -- The displayed image may differ depending on the model.
Ticker Input text while a video or image is displayed and display the text on the screen. •• Off / On ――Message, Time, Position, Motion, and Font options are enabled only when Ticker is set to On. MENUm → System → Ticker → ENTERE •• Message: Enter a message to display on the screen. •• Time: Set the Start Time and End Time to display a Message.
Video Wall Customize the layout of multiple displays that are connected to form a video wall. In addition, display part of a whole picture or repeat the same picture on each of the connected multiple displays. To display multiple images, refer to MDC Help or the MagicInfo user guide. Some models may not support the MagicInfo function.
Vertical Video Wall Video Wall On · Format Full · Horizontal 1 · Vertical 1 · Screen Position This function automatically divides the screen according to the specified number of vertical displays. Enter the number of vertically arranged displays. The vertical screen will automatically be divided according to the number entered. A maximum of 15 displays can be assigned to the vertical arrangement.
Source AutoSwitch Settings Turning on the display with Source AutoSwitch On, and the previous video source selection is not active, the display will automatically search the different video input sources for active video. MENUm → System → Source AutoSwitch Settings → ENTERE Source AutoSwitch When the Source AutoSwitch is On, the display video source will automatically be searched for active video.
General Max. Power Saving Turns off the product to reduce power consumption after the PC has been left idle for a specified period of time. MENUm → System → General → ENTERE •• Off / On ――Available only PC, DVI, HDMI mode. General Max.
Sound Feedback General Sound Feedback Off Auto Power Off Standby Control Auto Lamp Schedule Off Sound Feedback is enabled by default. Turn off Sound Feedback or adjust its volume. This function is enabled by default. The volume can be adjusted or muted. ――Off / Low / Medium / High Auto Power Enabling this option will automatically power on the product if the power cable is connected. OSD Display Power On Adjustment Your product gives sound feedback when you use product.
Lamp Schedule General Sound Feedback Off Auto Power Off Standby Control Auto Lamp Schedule Off OSD Display Power On Adjustment 0 Sec Temperature Control 77 Enables the lamp value to be adjusted to a user-specified value at a specified time in MDC mode. •• Off / On OSD Display Displays or hides a menu item on the screen. ――Source OSD / No Signal OSD / MDC OSD Power On Adjustment You can set the warm-up time for the screen to turn on after the power button is pressed.
Anynet+ (HDMI-CEC) Anynet+ (HDMI-CEC) MENUm → System → Anynet+ (HDMI-CEC) → ENTERE Anynet+ is a function that enables you to control all connected Samsung devices that support Anynet+ with your Samsung product remote. The Anynet+ system can be used only with Samsung devices that have the Anynet+ feature. To be sure your Samsung device has this feature, check if there is an Anynet+ logo on it. ――You can only control Anynet+ devices using the product remote control, not the buttons on the product.
Auto Turn Off Anynet+ (HDMI-CEC) Anynet+ (HDMI-CEC) On Auto Turn Off Yes Receiver Off Setting an Anynet+ Device to turn Off automatically when the product is turned off. •• No / Yes ――If Auto Turn Off is set to Yes, running external devices will turn off at the same time as the product powers off. ――May not be enabled depending on the device. Switching between Anynet+ Devices -- The displayed image may differ depending on the model.
Troubleshooting for Anynet+ Problem Anynet+ does not work. Possible Solution •• Check if the device is an Anynet+ device. The Anynet+ system supports Anynet+ devices only. •• Check if the Anynet+ device power cord is properly connected. •• Check the Anynet+ device’s Video/Audio/HDMI cable connections. •• Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+setup menu. •• Check whether the remote control is Anynet+ compatible. •• Anynet+ doesn’t work in certain situations.
Problem The connected device is not displayed. Possible Solution •• Check whether or not the device supports Anynet+ functions. •• Check whether or not the HDMI cable is properly connected. •• Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+ Setup menu. •• Search Anynet+ devices again. •• Anynet+ requires an HDMI connection. Make sure the device is connected to your product with an HDMI cable. •• Some HDMI cables may not support Anynet+ functions.
DivX® Video On Demand MENUm → System → DivX® Video On Demand → ENTERE Shows the registration code authorized for the product. If you connect to the DivXⓇ web site and register using that code, you can download the VOD registration file. For more information about DivXⓇ VOD, visit “http://vod.divx.com”. System DivX® Video On Demand On -- The displayed image may differ depending on the model. Play Mode Select Play Mode. Changing Play Mode will change the functions in Contents Home.
Magic Clone MENUm → System → Magic Clone → ENTERE Magic Clone Clone to USB Clone From USB Export the product settings to a USB device or load the settings via a USB device. This option is useful when assigning the same settings to several products. •• Clone to USB: Copy the product settings to a USB device. •• Clone From USB: Assign the settings saved in a USB device to the product. -- After configuration is complete, the product is rebooted automatically.
Reset All This option returns all the current settings for a display to the default factory settings. MENUm → System → Reset All → ENTERE System Reset All -- The displayed image may differ depending on the model. PC module power MENUm → System → PC module power → ENTERE The PC module can be turned on/off separately from the LFD. Synced power-on To turn on the PC module without turning on the LFD, select Off.
Chapter 09 Support Software Update MENUm → Support → Software Update → ENTERE -- Current Version: This is the software version already installed in the product. The Software Update menu lets you upgrade your product software to the latest version. ――Be careful not to turn off the power until the upgrade is complete. The product will turn off and on automatically after completing the software upgrade.
Contact Samsung MENUm → Support → Contact Samsung → ENTERE View this information when your product does not work properly or when you want to upgrade the software. You can find information regarding our call Centres and how to download products and software. ――Contact Samsung and find the product Model Code and Software Version.
Contents Home MagicInfo Lite MENUm → Support → Contents Home → ENTERE MENU m → Support → Contents Home → MagicInfo Lite → ENTER E ――MagicInfo Lite can also be accessed by pressing MagicInfo Lite/S on the remote control. ――To launch MagicInfo Lite, select MagicInfo Lite for the Play Mode on the System. Support Contents Home MagicInfo Lite player allows you to play content (image, video, document files) at a desired time. You can play content saved in Internal memory or USB memory.
AllShare Play MENU m → Support → Contents Home → AllShare Play → ENTER E Enjoy videos, photos, music files saved on a USB Mass Storage Class (MSC) device. ――Refer to page 148 for details about the AllShare Play menu. Source -- The input source can also be changed by using the SOURCE button on the remote control. MENUm → Support → Contents Home → Source → ENTERE You can display the screen of a source device connected to the product.
Chapter 10 AllShare Play Enjoy videos, photos, music files saved on a USB Mass Storage Class (MSC) device. What is AllShare Play? AllShare Play can also be accessed by pressing CONTENET(HOME) on the remote control. Play photo, video or music files saved on a storage device. Wirelessly connect a smartphone to a PC using a wireless network.
Compatible devices with AllShare Play •• Some types of USB devices, digital cameras and audio devices may not be compatible with the product. •• AllShare Play is only compatible with USB MSC devices. •• MSC device refers to a Mass Storage Class Bulk-Only Transport device. Examples of MSC devices include Thumb drives, Flash card readers and USB HDDs. (USB hubs are not supported.) These MSC devices must be connected directly to a USB port on the product.
Using a USB device Connecting a USB device It is recommended to use a USB HDD that has a power adapter. 1 Turn on your product. 2 Connect a USB device containing photo, music and/or movie files to the USB port on the back or side panel of the product. 3 A message New device connected. appears when the USB device is connected properly. Select type of content to play from Videos, Photos, and Music. ――If only one USB device is connected, files saved on the USB device are displayed automatically.
Connecting to a PC over a network Play photo, video and music files saved on a PC through a network connection in AllShare Play mode. •• For details on how to configure a network, refer to the section Network Settings. •• To view content saved on the PC, connect the product and PC to the same wireless router and visit http://www.samsung.com to download the AllShare PC software. •• Ensure the product and PC are connected to the same network subnet.
Using the AllShare Play features If you connect the product and a source device such as a cell phone or PC to the same network, you can play media content saved on the device such as videos, photos and music. Visit http://www.samsung.com or contact the Samsung Electronics Customer Centre for more information. Additional software may need to be installed on your mobile device. Refer to the mobile device user manual for details.
Using the Basic AllShare Play Features MENUm → Support → Contents Home → AllShare Play → ENTERE Sorting the file lists To sort files, press D on the remote control to specify the sorting criteria. Sort Criteria Operation Videos Photos Music Folder view Displays the whole folder. You can view the file name and thumbnail by selecting the folder. c c c Title Sorts and displays the file title in Symbol/Number/ Alphabet/Special order. c c c Latest Date Sorts and shows files by the latest date.
Playing Selected Files Creating a Playlist 1 Select files from the list of Videos, Photos, or Music files. 1 Select files from the list of Videos, Photos, or Music files. 2 Press TOOLS on the remote control and select Play selection. 2 Press TOOLS on the remote control and select Add to Playlist. ――The option does not appear if a folder is highlighted by the cursor. 3 Select files and press Play. ――The option does not appear if a folder is highlighted by the cursor.
My list MENUm → Support → Contents Home → AllShare Play → My list → ENTERE Access desired content more conveniently and quickly. To play files, select files or a Playlist and press E. •• Recently played: Display video, photo or music files that were recently played. This mode is suitable when playing files again that were played before. •• What's new: Display new video, photo or music files that were uploaded to a PC or USB device. This mode is suitable when playing new files that were recently uploaded.
Videos MENUm → Support → Contents Home → AllShare Play → Videos → ENTERE Playing a Video 1 Select the internal memory or a USB device. Select files from the list of files. 2 Press the E button or ∂ (Play) button. •• The file name appears on the top with its playing time. •• If video time information is unknown, the playing time and progress bar are not displayed. •• During video playback, you can search using the ◄ and ► buttons.
Photos MENUm → Support → Contents Home → AllShare Play → Photos → ENTERE Viewing a Photo (or Slide Show) 1 Select the internal memory or a USB device. Select a file from the list of files. 2 Press the E button. •• To view files manually, one at a time, press the left or right arrow buttons. •• To start the slide show, press the ∂(Play) button when the file you selected is displayed. •• During the slide show, all files in the file list are displayed in order, starting from the file you selected.
Music MENUm → Support → Contents Home → AllShare Play → Music → ENTERE Playing Music 1 Select the internal memory or a USB device. Select files from the list of files. 2 Press the E button or ∂(Play) button. •• When the music is playing, you can search using the π(REW) and µ(FF) button. ――If the sound is abnormal when you play MP3 files, adjust the Equaliser in the Sound menu. (An over-modulated MP3 file may cause a sound problem.
Videos / Photos / Music Play Option menu -- Pressing the INFO button while a device name is selected will display information about the selected device. -- Pressing the INFO button while a file is selected will display information about the selected file. When playing video or photo files, you can press the TOOLS button to display an Options menu. Option Name Operations Videos Photos Music View Sort music files grouped by Folder view, Title, Artist, Album or Genre.
Option Name Operations Videos Sound Mode You can change the Sound Mode. c Audio Language You can enjoy video in one of supported languages. c Photos Music c The function is enabled only when you play stream-type files which support multiple audio formats. Subtitle You can view a subtitle. You can select a specific language if the subtitle file contains multiple languages. c Subtitle Settings Displays the Subtitle Settings. You can set up a subtitle option.
Supported Subtitle and AllShare Play file formats Subtitle External Internal •• MPEG-4 timed text (.ttxt) •• Xsub Container: AVI •• SAMI (.smi) •• SubStation Alpha Container: MKV •• SubRip (.srt) •• SubViewer (.sub) •• Advanced SubStation Alpha Container: MKV •• Micro DVD (.sub or .txt) •• SubStation Alpha (.ssa) •• SubRip Container: MKV •• Advanced SubStation Alpha (.ass) •• Powerdivx (.psb) •• MPEG-4 timed text Container: MP4 Supported image resolutions File Extension Type Resolution *.
Supported music file formats File Extension Type Codec Comments *.mp3 MPEG MPEG1 Audio Layer 3 *.m4a, *.mpa, *.aac, *.3ga MPEG4 AAC *.flac FLAC FLAC The Seek (jump) function is not supported. Supports up to 2 channel Supported Video Formats •• Video content will not play, or not play correctly, if there is an error in the content or the container. •• Sound or video may not work if the contents have a standard bitrate/frame rate above the compatible Frame/sec listed in the table above.
File Extension Container *.avi AVI *.mkv MKV *.asf ASF *.wmv MP4 *.mp4 3GP *.mov VRO *.3gp VOB *.vro PS *.mpg TS Video Codec DIVX 3.11 / 4.x / 5.x / 6.x Resolution 1920 x 1080 Frame rate (fps) 6~30 Bit rate (Mbps) 30 Audio Codec AC3 LPCM ADMPCM MPEG4 SP / ASP (IMA, MS) AAC HE-AAC H.264 BP / MP / HP WMA DD+ Motion JPEG MPEG(MP3) *.mpeg DTS Core *.ts Window Media Video v9 G.711(ALaw,μ-Law) *.tp *.trp MPEG2 *.mov *.flv MPEG1 *.vob *.svi *.m2ts *.mts *.divx *.
Chapter 11 MagicInfo Lite -- To launch MagicInfo Lite, select MagicInfo Lite for the Play Mode on the System. File Formats Compatible with MagicInfo Lite player Read before using MagicInfo Lite player •• The file system supports FAT16, FAT32 and NTFS. •• A file with a vertical and horizontal resolution larger than the maximum resolution cannot be played. Check the vertical and horizontal resolution of the file. •• Check the supported video and audio Codec types and Versions.
Contents File Extension Container *.avi AVI *.mkv MKV *.asf ASF *.wmv MP4 *.mp4 3GP *.mov VRO *.3gp VOB *.vro PS *.mpg TS Video Codec DIVX 3.11 / 4.x / 5.x / 6.x Resolution 1920 x 1080 Frame rate (fps) 6~30 Bit rate (Mbps) 30 Audio Codec AC3 LPCM AAC MPEG4 SP / ASP HE-AAC WMA H.264 BP / MP / HP DD+ MPEG(MP3) DTS Core Motion JPEG G.711(ALaw,μ-Law) *.mpeg *.ts Window Media Video v9 *.tp *.trp MPEG2 *.flv *.vob *.svi MPEG1 *.m2ts *.mts VP6 640 x 480 4 *.
Video •• 3D video is not supported. •• Content with a resolution larger than the resolution specified in the table above is not supported. •• Video content with a Bit rate or Frame rate larger than the rate specified in the table above can cause choppy video during playback. •• Video content will not play, or not play correctly, if there is an error in the content or the container. •• Some USB/digital camera devices may not be compatible with the player.
Flash Power Point •• Compatible with Flash 10.1 •• Flash Animation -- Compatible file format : SWF •• Recommended resolution : 960 x 540 -- Caution Performance comparable to Flash Player on a Windows operating system cannot be guaranteed Optimization is needed during content creation •• Flash Video -- Compatible file format : FLV -- Video Codec : H.264 BP Resolution : 1920 x 1080 -- Audio Codec : H.
PDF •• Compatible document file formats -- Extension : pdf •• Functions not supported -- Content less than 1 pixel not supported because of performance degradation issue. -- Masked Image, Tiled Image content not supported. -- Content with Rotated Text, not supported. -- 3D Shadow Effects not supported. WORD •• Compatible document file formats -- Extension : .doc, .
Approving a connected device from the server 1 4 Select Lite from the menus on the left. 5 Select Unapproved from the sub-menus of Lite. 6 Select the Approve button for your device from the list of unapproved Lite devices. Access the server you have assigned to your device. 2 Enter your ID and password to log in. 3 Select Device from the top menu bar.
7 Enter the information required to approve the device. 9 When the device is approved by the server, the schedule registered in the selected group will be downloaded to the device. The schedule will run after it is downloaded. ――For further details on how to configure a schedule, refer to the . ――If a device is deleted from the list of devices approved by the server, the device will reboot to reset its settings.
2 MagicInfo Lite Select Network schedule in the MagicInfo Lite player menu. MagicInfo Lite player MENUm → Support → Contents Home → MagicInfo Lite → ENTERE ――To launch MagicInfo Lite, select MagicInfo Lite for the Play Mode on the System. ――Press the MagicInfo Lite/S button on the remote control. Network schedule Local schedule Internal Auto Play MagicInfo Lite player Network schedule You can view whether the server is connected (approval) in the MagicInfo Lite menu screen.
Local schedule Go to Local Schedule Manager → Click Create to create a schedule → Select the schedule you want to run 1 MagicInfo Lite player Select Local schedule in the MagicInfo Lite player menu screen. Run schedules created in Local Schedule Manager. Network schedule ――This menu is disabled if there was no schedule run previously in Local Schedule Manager.
――The option is enabled only when there is at least one content item, except for music files, in the "MagicInfoSlide" folder on USB Device Auto Play USB Storage. ――Ensure a USB device is inserted. Be sure to create a folder named "MagicInfoSlide" in the USB device and put content in the MagicInfo Lite player folder. Network schedule 1 Local schedule Select USB Device Auto Play in the MagicInfo Lite player menu screen.
2 Local Schedule Manager Select Create in the Local Schedule Manager screen. Configure the settings for playback from Local schedule. Local Schedule Manager Alternatively, select and play content from internal or USB memory according to the customized playback sequence. Storage Edit No Playing Schedule Registering a Local schedule 1 Create Internal Memory Delete Run Select Local Schedule Manager in the MagicInfo Lite menu screen.
4 Select Contents to specify the content you want to play. 5 Select Duration Contents Direction USB Internal Memory No Items Contents Folder1 1 Menu1.jpg 2 Menu2.jpg Duration Menu1.jpg 00:00:05 Menu2.jpg 00:00:05 OK Up Deselect All Down Cancel Save Duration Cancel Return Return -- A maximum of 99 content files can be selected. Specify the sequence and time duration to play content files.
6 Select Save. Select the memory space you want to save the content to. ――Ensure at least one Local schedule is registered. Create Time --:-- am~ --:-- pm Contents Modifying a Local schedule 1 Delete Select Local Schedule Manager in the MagicInfo Lite menu screen. Menu1.
3 Deleting a Local schedule Select Edit. ――Ensure at least one Local schedule is registered. Edit Time 12:00 am~ 12:00 pm Contents Menu1.jpg Menu2 Time Contents 1 Delete Select Local Schedule Manager in the MagicInfo Lite menu screen.
Running a Local schedule Stopping a Local schedule ――Ensure at least one Local schedule is registered. ――This function is enabled only when a schedule is running. 1 Selecting Stop will change the running mode from Local schedule to Network schedule. Select Local Schedule Manager in the MagicInfo Lite menu screen. 1 Select Local Schedule Manager in the MagicInfo Lite menu screen.
Viewing the details of a Local schedule 1 3 The details of the schedule will be displayed. Select Local Schedule Manager in the MagicInfo Lite menu screen. Information 2012.01.01_1834.lsch MagicInfo Lite 12:00 am~12:00 pm, 2 File(s) - Menu1.jpg Menu2.jpg MagicInfo Lite player Local Schedule Manager Close Content manager Close Settings Mode Server USB Local schedule Connected Connected Return Return 2 Select the local schedule you want to view the details of.
3 Copying a Local schedule 1 Select local schedule files and press Copy. Select Local Schedule Manager in the MagicInfo Lite menu screen. Local Schedule Manager Storage MagicInfo Lite Internal Memory No Playing Schedule MagicInfo Lite player Create Edit Delete All schedules Local Schedule Manager 2012.01.01_1834.
2 Content manager Content manager Copying content 1 Select the content you want to copy. Internal Memory Select Content manager in the MagicInfo Lite menu screen. USB Folder1 No Items Menu1.jpg Menu2.jpg MagicInfo Lite player MagicInfo Lite player Copy Local Schedule Manager Content manager Free Space 5549.2MB Free Space 6227.2MB Selected File(s) : 0.0MB (0) Selected File(s) : 0.
2 Deleting content 1 Select Content manager in the MagicInfo Lite menu screen. Select the content you want to delete. Next, select Delete. •• Content under Internal Memory and USB memory can be deleted at the same time. Content manager MagicInfo Lite player Internal Memory MagicInfo Lite player Folder1 Menu3.jpg Local Schedule Manager USB Menu4.jpg Menu1.jpg Content manager Menu2.jpg Close Settings Copy Mode Server USB Local schedule Connected Connected Return Free Space 5549.
Settings Server Network Settings To run MagicInfo Lite, connect to a network. Settings Server Network Settings Server Default content duration Enter the MagicInfo Lite server settings. (E.g.: http://192.168.0.10:7001/MagicInfo/) Content ratio Default content None •• If the SSL option is enabled, the server is configured to use https and data transfer is encrypted. ――Enter the server IP address and port number. Use 7001 as the port number.
Default content duration Content Layout Specify the duration to play content. Change the screen orientation to landscape or portrait view. •• Image Viewer Time, Doc viewing time, PPT Viewer Time, PDF viewing time, Flash viewing time ――The duration must be at least 5 seconds. Content Ratio •• Landscape / Portrait Schedule Name Select a schedule title format when creating a local schedule. •• YYYYMMDD / YYYYDDMM / DDMMYYYY Specify the display aspect ratio by type when playing content.
When Content is Running Viewing the details of the content that is running Information Software Version : A-LUBXGDSP-0100.18 Device Name : Monitor Device ID : FF-FF-FF-FF-FF-FF Mode : Local schedule Server : Disconnected USB : Connected Schedule download : No Schedule to download Press the INFO button on the remote control.
Changing the settings for the content that is running Tools Picture Mode Standard Sound Mode Standard PIP Off Background Music Off Background Music Setting Safely Remove USB Device Press the TOOLS button on the remote control. You can change the Picture Mode or Sound Mode setting or safely remove a USB device (Safely Remove USB Device) while content is playing by pressing the TOOLS button on the remote control.
Chapter 12 MagicInfo Premium S -- To launch MagicInfo Premium S, select MagicInfo Premium S for the Play Mode on the System. A Licence needs to be purchased to use MagicInfo Premium S. To download the software, go to the Samsung homepage at http://www.samsunglfd.com. To purchase a licence, contact a Customer Server Centre. File Formats Compatible with MagicInfo Premium S Player Read before using MagicInfo Premium S Player •• The file system supports FAT16, FAT32 and NTFS.
Video •• 3D video is not supported. •• Content with a resolution larger than the resolution specified in the table above is not supported. •• Video content with a Bit rate or Frame rate larger than the rate specified in the table above can cause choppy video during playback. •• Video content will not play, or not play correctly, if there is an error in the content or the container. •• Some USB/digital camera devices may not be compatible with the player.
Flash Power Point •• Compatible with Flash 10.1 •• Flash Animation -- Compatible file format : SWF •• Recommended resolution : 960 x 540 -- Caution Performance comparable to Flash Player on a Windows operating system cannot be guaranteed Optimization is needed during content creation •• Flash Video -- Compatible file format : FLV -- Video Codec : H.264 BP Resolution : 1920 x 1080 -- Audio Codec : H.
WORD Template files •• Compatible document file formats -- Extension : .doc, .docx -- Version : Office 97 ~ Office 2007 •• Functions not supported -- Page background effect -- Some paragraph styles -- Word Art -- Align A group alignment error may occur •• Creation/editing/playback are only available in Template Manager. LFD •• Supported in USB Device Auto Play and Network schedule (Authored in a PC authoring tool for Premium S Player) •• Compatible document file formats -- Extension : .
Network Schedule Multiframe Playback restrictions •• A maximum of two video (Videos) files can be played. •• If PIP mode is enabled, more than one video (Videos) file cannot be played. •• More than one Flash file cannot be played. •• For Office files (PPT and Word files) and PDF files, only one file type is supported at a time. •• LFD(.lfd) files are not supported. Sound output restrictions •• More than one sound output cannot be used.
Playback restrictions •• A maximum of two video (Videos) files can be played. •• If PIP mode is enabled, more than one video (Videos) file cannot be played. •• More than one Flash file cannot be played. •• For Office files (PPT and Word files) and PDF files, only one file type is supported at a time. •• Multiple videos (Videos) cannot be played on a single display of a video wall simultaneously. •• More than one PIP content file cannot be played.
Approving a connected device from the server 1 4 Select Premium from the menus on the left. 5 Select Unapproved from the sub-menus of Premium. 6 Select the Approve button for your device from the list of unapproved Premium devices. Access the server you have assigned to your device. 2 Enter your ID and password to log in. 3 Select Device from the top menu bar.
7 Enter the information required to approve the device. 9 When the device is approved by the server, the schedule registered in the selected group will be downloaded to the device. The schedule will run after it is downloaded. ――For further details on how to configure a schedule, refer to the . ――If a device is deleted from the list of devices approved by the server, the device will reboot to reset its settings.
MagicInfo Premium S 2 Select Network schedule in the MagicInfo Premium S Player menu. MagicInfo Premium S Player T Contents Home MagicInfo Premium S ENTER E MENUm : Support ――To launch MagicInfo Premium S, select MagicInfo Premium S for the Play Mode on the System. ――Press the MagicInfo Lite/S button on the remote control.
Local schedule Go to Local Schedule Manager → Click Create to create a schedule → Select the schedule you want to run 1 MagicInfo Premium S Player Select Local schedule in the MagicInfo Premium S Player menu screen. Run schedules created in Local Schedule Manager. Network schedule ――This menu is disabled if there was no schedule run previously in Local Schedule Manager.
――The option is enabled only when there is at least one content item, except for music files, in Internal Memory. Internal Auto Play 1 MagicInfo Premium S Player Select Internal Auto Play in the MagicInfo Premium S Player menu screen. •• Play content, which has been copied to Internal Memory, in alphabetical order.
2 Local Schedule Manager Select Create in the Local Schedule Manager screen. Configure the settings for playback from Local schedule. Local Schedule Manager Alternatively, select and play content from internal or USB memory according to the customized playback sequence. Storage Edit No Playing Schedule Registering a Local schedule 1 Create Internal Memory Delete Run Select Local Schedule Manager in the MagicInfo Premium S menu screen.
4 Select Contents to specify the content you want to play. 5 Select Duration Contents Direction USB Internal Memory No Items Contents Folder1 1 Menu1.jpg 2 Menu2.jpg Duration Menu1.jpg 00:00:05 Menu2.jpg 00:00:05 OK Up Deselect All Down Cancel Save Duration Cancel Return Return -- A maximum of 99 content files can be selected. Specify the sequence and time duration to play content files.
6 Select Save. Select the memory space you want to save the content to. ――Ensure at least one Local schedule is registered. Create Time --:-- am~ --:-- pm Contents Modifying a Local schedule 1 Delete Select Local Schedule Manager in the MagicInfo Premium S menu screen. Menu1.
3 Deleting a Local schedule Select Edit. ――Ensure at least one Local schedule is registered. Edit Time 12:00 am~ 12:00 pm Contents Menu1.jpg Menu2 1 Delete Select Local Schedule Manager in the MagicInfo Premium S menu screen.
Running a Local schedule Stopping a Local schedule ――Ensure at least one Local schedule is registered. ――This function is enabled only when a schedule is running. 1 Selecting Stop will change the running mode from Local schedule to Network schedule. Select Local Schedule Manager in the MagicInfo Premium S menu screen. 1 Select Local Schedule Manager in the MagicInfo Premium S menu screen.
Viewing the details of a Local schedule 1 3 The details of the schedule will be displayed. Select Local Schedule Manager in the MagicInfo Premium S menu screen. Information 2012.01.01_1834.lsch MagicInfo Premium S 12:00 am~12:00 pm, 2 File(s) - Menu1.jpg Menu2.
3 Copying a Local schedule 1 Select local schedule files and press Copy. Select Local Schedule Manager in the MagicInfo Premium S menu screen. Local Schedule Manager Storage MagicInfo Premium S Internal Memory No Playing Schedule Edit Delete MagicInfo Premium S Player All schedules Local Schedule Manager 2012.01.01_1834.
2 Template Manager Select Create in the Template Manager screen. Template Manager Registering a Template 1 Storage Select Template Manager in the MagicInfo Premium S menu screen.
4 Organize a template by inserting text, video, photo, or PDF files as desired. Contents Contents Create Type Select the position and the background. None Contents Use background image Preview No Items Size Fit to screen Source PC Previous Next OK Cancel Return Cancel •• Type: Select a file type to use to organize a template. -- PIP / Videos / Image / Flash / Office / PDF •• Contents: Select a file saved in Internal Memory or a USB device.
5 6 Select sound or background music. Select Save. Select the memory space you want to save the content to. Create Create Select sound or background music. Save the template and finish. Internal Storage Background Music Template Name Preview 20130101_2222 Preview Previous Previous Next OK Cancel Cancel •• If two Videos files are assigned, select the file with the sound you want to use. -- If one of the video files includes PIP content, sound from the PIP content can be selected.
2 Content manager Content manager Copying content 1 Select the content you want to copy. Internal Memory Select Content manager in the MagicInfo Premium S menu screen. USB Folder1 No Items Menu1.jpg Menu2.jpg MagicInfo Premium S MagicInfo Premium S Player Copy Local Schedule Manager Template Manager Content manager Free Space 5549.2MB Free Space 6227.2MB Selected File(s) : 0.0MB (0) Selected File(s) : 0.
2 Deleting content 1 Select Content manager in the MagicInfo Premium S menu screen. Select the content you want to delete. Next, select Delete. •• Content under Internal Memory and USB memory can be deleted at the same time. Content manager MagicInfo Premium S Internal Memory MagicInfo Premium S Player Folder1 Menu3.jpg Local Schedule Manager USB Menu4.jpg Menu1.jpg Template Manager Menu2.
Server Network Settings Settings To run MagicInfo Premium S, connect to a network. Settings Server Server Network Settings Enter the MagicInfo Premium S server settings. Default content duration •• If the SSL option is enabled, the server is configured to use https and data transfer is encrypted. ――Enter the server IP address and port number. Use 7001 as the port number.
Default content duration Content Layout Specify the duration to play content. Change the screen orientation to landscape or portrait view. •• Image Viewer Time, Doc viewing time, PPT Viewer Time, PDF viewing time, Flash viewing time ――The duration must be at least 5 seconds. Content Ratio •• Landscape / Portrait Schedule Name Select a schedule title format when creating a local schedule. •• YYYYMMDD / YYYYDDMM / DDMMYYYY Specify the display aspect ratio by type when playing content.
When Content is Running Viewing the details of the content that is running Information Software Version : A-LUBXGDSP-0100.18 Device Name : Monitor Device ID : FF-FF-FF-FF-FF-FF Mode : Local schedule Server : Disconnected USB : Connected Schedule download : No Schedule to download Press the INFO button on the remote control.
Changing the settings for the content that is running Press the TOOLS button on the remote control. You can change the Picture Mode or Sound Mode setting or safely remove a USB device (Safely Remove USB Device) while content is playing by pressing the TOOLS button on the remote control.
Chapter 13 MagicInfo Videowall S -- To launch MagicInfo Videowall S, select MagicInfo Videowall S for the Play Mode on the System. A licence needs to be purchased to use MagicInfo Videowall S. To download the software, go to the Samsung homepage at http://www.samsunglfd.com. To purchase a licence, contact a Customer Server Centre.
Video Image •• 3D video is not supported. •• Compatible image file format : Jpeg, bmp, png •• Content with a resolution larger than the resolution specified in the table above is not supported. •• Supported maximum resolution : 15,360 x 8,640 -- A higher resolution image may take longer to display on the screen. •• Video content with a Bit rate or Frame rate larger than the rate specified in the table above can cause choppy video during playback.
Restrictions •• Only one video (Videos) file can be played per client. ――Different content files can be played on the displays of a video wall. Two video (Videos) files cannot be played on a single display of a video wall.
MagicInfo Videowall S MENUm → Support → Contents Home → MagicInfo Videowall S → ENTERE → RETURN ――To launch MagicInfo Videowall S, select MagicInfo Videowall S for the Play Mode on the System. ――Press the MagicInfo Lite/S button on the remote control. Settings Default Storage Specify the location you want to save content (downloaded from the server) to. •• Internal Memory: Save the content to the internal memory of the product. •• External: Save the content to USB memory.
When Content is Running Information Software Version : A-LUBXGDSP-0100.18 Device Name : Monitor Device ID : FF-FF-FF-FF-FF-FF USB : Connected Press the INFO button on the remote control.
Chapter 14 Troubleshooting Guide Requirements Before Contacting Samsung Customer Service Centre Before calling Samsung Customer Service Centre, test your product as follows. If the problem persists, contact Samsung Customer Service Centre. Testing the Product Check if your product is operating normally by using the product test function. If the screen remains blank while the power LED blinks even when the product is correctly connected to a PC, perform product testing.
Check the followings. Installation issue (PC mode) The screen keeps switching on and off. Check the cable connection between the product and PC, and ensure the connection is secure. Blank spaces are found on all four sides of the screen when an HDMI or HDMI-DVI cable is connected to the product and PC. The blank spaces found on the screen have nothing to do with the product. Blank spaces on the screen are caused by the PC or graphics card.
Screen issue The screen is not clear. The screen is blurry. Adjust Coarse and Fine. Remove any accessories (video extension cable, etc) and try again. Set the resolution and frequency to the recommended level. The screen appears unstable and shaky. There are shadows or ghost images left on the screen. Check that the resolution and frequency of the PC and graphics card are set within a range compatible with the product.
Screen issue The screen display does not look normal. Encoded video content may cause the display to appear corrupted in scenes featuring fast moving objects such as in a sports event or action video. Low signal level or low picture quality may cause the display to appear corrupted. This does not mean the product is defective. A cell phone within a distance of one-meter radius may cause static on analogue and digital products. The brightness and colour do not look normal.
Sound issue There is no sound. Check the connection of the audio cable or adjust the volume. Check the volume. The volume is too low. Adjust the volume. If the volume is still low after turning it up to the maximum level, adjust the volume on your PC sound card or software programmeme. Video is available but there is no sound. If an HDMI cable is connected, check the audio output settings on the PC. Go to Sound and change Speaker Select to Internal.
Sound issue There is audible sound when the volume is muted. When Speaker Select is set to External, the volume button and mute function are disabled. Adjust the volume for the external speakers. Audio settings for main speakers are separate from the internal speakers on the product. Changing or muting the volume on the product does not affect an external amplifier(decoder). Sound from the monitor does not change after Sound Mode is changed.
Other issue The product smells like plastic. The plastic smell is normal and disappears over time. The monitor appears tilted. Remove and then attach the stand again to the product. Audio or video cuts out intermittently. Check the cable connection and connect it again if required. Using a very hard or thick cable may corrupt audio and video files. Make sure cables are flexible enough to ensure durability. When mounting the product onto a wall, it is recommended to use right-angle cables.
Other issue There is no sound in HDMI mode. Displayed picture colours may not look normal. Video or sound may not be available. This can occur if a source device that only supports an older version of the HDMI standard is connected to the product. If these issues occur, connect an audio cable along with the HDMI cable. Some PC graphics cards may not automatically recognize HDMI signals that do not include sound. In this case, manually select a sound input. The IR sensor is not functioning.
Q&A Question How can I change the frequency? Answer Set the frequency on your graphics card. •• Windows XP: Go to Control Panel → Appearance and Themes → Display → Settings → Advanced → Monitor and adjust the frequency in Monitor Settings. •• Windows ME/2000: Go to Control Panel → Display → Settings → Advanced → Monitor and adjust the frequency in Monitor Settings. Refer to the user manual for your PC or graphics card for further instructions on adjustment.
Question How do I set powersaving mode? Answer •• Windows XP: Set power-saving mode in Control Panel → Appearance and Themes → Display → Screen Saver Settings or BIOS SETUP on the PC. •• Windows ME/2000: Set power-saving mode in Control Panel → Display → Screen Saver Settings or BIOS SETUP on the PC. •• Windows Vista: Set power-saving mode in Control Panel → Appearance and Personalization → Personalize → Screen Saver Settings or BIOS SETUP on the PC.
Chapter 15 Specifications 1 General Size Model Name Panel 2 MD32C Size 32 CLASS (31.5 inches / 80 cm) 40 CLASS (40.0 inches / 101 cm) Display area 698.4 mm (H) x 392.85 mm (V) / 27.5 inches (H) x 15.5 inches (V) 885.6 mm (H) x 498.15 mm (V) / 34.9 inches (H) x 19.6 inches (V) Dimensions (W x H x D) 736.0 x 436.0 x 93.5 mm / 29 x 17.2 x 3.7 inches 925.4 x 542.6 x 93.5 mm /36.4 x 21.4 x 3.7 inches Weight (without stand) 6.4 kg / 14.1 Ibs 9.8 kg / 21.6 Ibs VESA 200 mm × 200 mm / 7.
Display Colour MD32C / MD40C / MD46C: 1.07B(10bits Dithering) MD55C: 16.7M (8Bits Dithering) Synchronization Resolution Horizontal Frequency 30~81 kHz Vertical Frequency 56~75Hz Optimum resolution 1920x1080@60Hz Maximum resolution 1920x1080@60Hz Maximum Pixel Clock 148.5MHz (Analog,Digital) Power Supply AC 100 to 240 VAC (+/- 10%), 60 / 50Hz ± 3Hz. Refer to the label at the back of the product as the standard voltage can vary in different countries.
――Plug-and-Play This monitor can be installed and used with any Plug-and-Play compatible systems. Two-way data exchange between the monitor and PC system optimizes the monitor settings. Monitor installation takes place automatically. However, you can customize the installation settings if desired. ――Due to the nature of the manufacturing of this product, approximately 1 pixel per million (1ppm) may appear brighter or darker on the panel. This does not affect product performance.
PowerSaver The power-saving function of this product reduces power consumption by switching off the screen and changing the colour of the power LED if the product is not used for a specified period of time. The power is not turned off in power-saving mode. To switch the screen back on, press any key on the keyboard or move the mouse. Powersaving mode only functions when the product is connected to a PC with a power-saving function.
Preset Timing Modes ――This product can be set to only one resolution for each screen size to obtain the optimum picture quality due to the nature of the panel. Using a resolution other than -- Horizontal Frequency The time required to scan a single line from the left to the right side of the screen is called a horizontal cycle. The reciprocal number of a horizontal cycle is called horizontal frequency. Horizontal frequency is measured in kHz.
Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock (MHz) Sync Polarity (H/V) VESA, 1024 x 768 56.476 70.069 75.000 -/- VESA, 1024 x 768 60.023 75.029 78.750 +/+ VESA, 1152 x 864 67.500 75.000 108.000 +/+ VESA, 1280 x 720 45.000 60.000 74.250 +/+ VESA, 1280 x 800 49.702 59.810 83.500 -/+ VESA, 1280 x 1024 63.981 60.020 108.000 +/+ VESA, 1280 x 1024 79.976 75.025 135.000 +/+ VESA, 1366 x 768 47.712 59.790 85.500 +/+ VESA,1440 x 900 55.
Chapter 16 Appendix Contact SAMSUNG WORLD WIDE ――If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre. NORTH AMERICA U.S.A 1-800-SAMSUNG(726-7864) http://www.samsung.com CANADA 1-800-SAMSUNG(726-7864) http://www.samsung.com/ca (English) http://www.samsung.com/ca_fr (French) MEXICO 01-800-SAMSUNG(726-7864) http://www.samsung.com ARGENTINE 0800-333-3733 http://www.samsung.com BOLIVIA 800-10-7260 http://www.samsung.
LATIN AMERICA COLOMBIA 01-8000112112 http://www.samsung.com/co Bogotá: 6001272 COSTA RICA 0-800-507-7267 http://www.samsung.com/latin (Spanish) http://www.samsung.com/latin_en (English) DOMINICA 1-800-751-2676 http://www.samsung.com/latin (Spanish) http://www.samsung.com/latin_en (English) ECUADOR 1-800-10-7267 http://www.samsung.com/latin (Spanish) http://www.samsung.com/latin_en (English) EL SALVADOR 800-6225 http://www.samsung.com/latin (Spanish) http://www.samsung.
LATIN AMERICA PUERTO RICO 1-800-682-3180 http://www.samsung.com TRINIDAD & TOBAGO 1-800-SAMSUNG(726-7864) http://www.samsung.com URUGUAY 40543733 http://www.samsung.com VENEZUELA 0-800-100-5303 http://www.samsung.com AUSTRIA 0810 - SAMSUNG (7267864, € 0.07/min) http://www.samsung.com BELGIUM 02-201-24-18 http://www.samsung.com/be (Dutch) EUROPE http://www.samsung.com/be_fr (French) BOSNIA 051 133 1999 http://www.samsung.com BULGARIA 07001 33 11 , normal tariff http://www.samsung.
EUROPE FINLAND 030-6227 515 http://www.samsung.com FRANCE 01 48 63 00 00 http://www.samsung.com/fr GERMANY 0180 5 SAMSUNG bzw. http://www.samsung.com 0180 5 7267864* (*0,14 €/Min. aus dem dt. Festnetz, aus dem Mobilfunk max. 0,42 €/Min.) GREECE 80111-SAMSUNG (80111 726 7864) only from land line http://www.samsung.com (+30) 210 6897691 from mobile and land line HUNGARY 06-80-SAMSUNG(726-7864) http://www.samsung.com ITALIA 800-SAMSUNG(726-7864) http://www.samsung.
EUROPE ROMANIA 08008 SAMSUNG (08008 726 7864) http://www.samsung.com TOLL FREE No. SERBIA +381 11 321 6899 http://www.samsung.com (old number still active 0700 7267864) SLOVAKIA 0800 - SAMSUNG(0800-726 786) http://www.samsung.com SPAIN 902 - 1 - SAMSUNG (902 172 678) http://www.samsung.com SWEDEN 0771 726 7864 (SAMSUNG) http://www.samsung.com SWITZERLAND 0848 - SAMSUNG(7267864, CHF 0.08/min) http://www.samsung.com/ch (German) http://www.samsung.com/ch_fr (French) U.
CIS RUSSIA 8-800-555-55-55 http://www.samsung.com TADJIKISTAN 8-10-800-500-55-500 http://www.samsung.com UKRAINE 0-800-502-000 http://www.samsung.com/ua (Ukrainian) http://www.samsung.com/ua_ru (Russian) UZBEKISTAN 8-10-800-500-55-500 http://www.samsung.com AUSTRALIA 1300 362 603 http://www.samsung.com CHINA 400-810-5858 http://www.samsung.com HONG KONG (852) 3698 4698 http://www.samsung.com/hk (Chinese) ASIA PACIFIC http://www.samsung.
ASIA PACIFIC PHILIPPINES 1-800-10-SAMSUNG(726-7864) for PLDT http://www.samsung.com/ph 1-800-3-SAMSUNG(726-7864) for Digitel 1-800-8-SAMSUNG(726-7864) for Globe 02-5805777 SINGAPORE 1800-SAMSUNG(726-7864) http://www.samsung.com TAIWAN 0800-329-999 http://www.samsung.com 0266-026-066 THAILAND 1800-29-3232 http://www.samsung.com/th 02-689-3232 VIETNAM 1 800 588 889 http://www.samsung.com 8000-4726 http://www.samsung.com/ae (English) MENA BAHRAIN http://www.samsung.
MENA OMAN 800-SAMSUNG(726-7864) http://www.samsung.com/ae (English) http://www.samsung.com/ae_ar (Arabic) QATAR 800-2255 (800-CALL) http://www.samsung.com/ae (English) http://www.samsung.com/ae_ar (Arabic) SAUDI ARABIA 9200-21230 http://www.samsung.com/sa (Arabic) SYRIA 18252273 http://www.samsung.com/Levant (English) TURKEY 444 77 11 http://www.samsung.com U.A.E 800-SAMSUNG (726-7864) http://www.samsung.com ANGOLA 91-726-7864 http://www.samsung.com BOTSWANA 0800-726-000 http://www.
AFRICA SOUTH AFRICA 0860-SAMSUNG (726-7864) http://www.samsung.com TANZANIA 0685 88 99 00 http://www.samsung.com UGANDA 0800 300 300 http://www.samsung.com ZAMBIA 211350370 http://www.samsung.
Responsibility for the Pay Service (Cost to Customers) ――When the service is requested, in spite of in warranty, we may charge you for a visit from a service technician in the following cases. Not a product defect Cleaning of the product, Adjustment, Explanation, Re-installation and etc. •• If a service technician gives instructions on how to use product or simply adjusts options without disassembling product. •• If a defect is caused by external environmental factors (Internet, Antenna, Wired Signal, etc.
WEEE Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in countries with separate collection systems) This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with other household waste at the end of their working life.
Optimum Picture Quality and Afterimage Burn-in Prevention Optimum Picture Quality •• To enjoy the optimum picture quality, go to Control Panel on your PC and adjust the resolution and refresh rate as follows. The picture quality of TFT-LCDs may degrade if the optimum resolution is not selected. -- Resolution: 1920 x 1080 -- Vertical frequency (refresh rate): 56 ~ 75 Hz Screen refresh rate: refers to the number of times a display image is refreshed per second.
What is afterimage burn-in? Prevention of Afterimage Burn-in Black Matrix Common Electrode (ITO) Afterimage burn-in should not occur when the LCD panel is operating normally. Normal operation refers to a continuously changing video pattern. If the LCD panel displays a fixed pattern for an extended period of time (more than 12 hours), a slight voltage difference may occur between the electrodes in pixels that control the liquid crystals.
•• Avoid combinations of a text colour and background colour of contrasting brightness. ――Avoid using grey as it may contribute to afterimage burn-in. ――Avoid using colours of contrasting brightness (black and white; grey). -- Brightness: refers to the lightness or darkness of a colour which varies depending on the amount of light emitted. FLIGHT : TIME FLIGHT : TIME OZ348 : 20:30 OZ348 : 20:30 •• Regular Text colour Change -- Use bright colours of similar brightness.
Licence Manufactured under licence from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. DivX Certified Ⓡ to play DivX Ⓡ video up to HD 1080p, including premium content. DivXⓇ, DivX CertifiedⓇ and associated logos are trademarks of DivX, Inc. and are used under licence. Ⓡ Manufactured under a licence from U.S.
Terminology 480i / 480p / 720p / 1080i / 1080p____ Each of the scanning rates above refers to the number of effective scanning lines that decides the screen resolution. The scanning rate may be indicated in i (interlaced) or p (progressive), depending on the scanning method. - Scanning Scanning refers to a process of sending pixels that form an image progressively. A larger number of pixels will deliver a clearer and more vivid picture.
