User Guide

•RGB:AllowstheusertoadjusttheR(Red),G(Green),andB(Blue)valuesof
theimagestobecaptured.
•SettingRGBValues
1.Pressthe+/-button,andthenusetheUPand
DOWNbuttonstoselecttheRGBicon(RGB).
TheRGBmenubarwillappearasshown.
2.UsetheUP/DOWN/LEFTandRtGHTbuttons
toselectthedesiredRGBvalue.
-Up/DownButton:NavigatesbetweenR,G,
andBicons.
-Left/RightButton:Changesvalueofeachicon.
3.Whenyoupressthe+/-buttonagain,thevalueyousetwillbesavedand
RGBsetupmodewillend.
÷Whenspecialeffect(colour)fromtheiconotherthanft_ is selected, it will
not be able to select the RGB.
• ISO :You can selectthe tSO sensitivitywhen taking pictures.
The speed or specific light-sensifivityof a camera israted by ISO numbers.
• Selecting an ISOSensitivity
1. Press the+/- button,and then use the UP and
DOWN buttonsto select the tSO icon( _ ).
The tSO menu bar will appear as shown.
2. Use the LEFT and RIGHT buttons to selectthe
desired ISO sensifivity value.
- AUTO
:The camerds sensitivityis automatically
changed byvariables such as lighting valueor subject brightness.
- 50, 100, 200, 400, 800, 1600
:You can increasethe shutter speed while thesame amount of light is
present, by increasingthe ISOsensitivity. However,the image may be
saturated in high luminance. The higher the tSO value, the higher the
camera's sensitivity to light isand therefore thegreater its capacity to take
pictures in dark conditions. However,the noise levelin the image wilI
increase as the ISOvalue increases, makingthe imageappear coarse.
3. When you press the +/- button again,the value you setwill be savedand ISO
setup mode willend.
(32}