the P6_i_l::it
g Use this camera in the following order. Before connecting the camera to a PC, via the USB cable, you will need to set upthe camera driver, tnstall the camera driver that is contained in Application software CD-ROM. (p.74) Thank you for buying a Samsung Digital Camera. • Prior to using this camera, please read the user manual thoroughly. • When you require After Sales service, please bhng the camera and the cause of the camera malfunction (such as battery, Memory card etc.) to the A/S centre.
DANGER indicates an imminently hazardo_tssituation which, if not avoided, wilt result indeath or serious injury. • Do net attempt to modify this camei:a jB_an_,ay. To de so may result in fire, injury, electric shock or severe _ma_ i_iyo_r your camera. Internal inspection, maintenance and [8_airs _ld oniy be carried out by your dealeror Samsung Camera Self/ice _ntre. _ '_"_ • P ease do not use th s pr_uct n c ce _rox m y to_mmab e or expos ve gases, as this could inq'[_se the ris_plceion.
CAUTION indicates a potentially hazardous situation which, if not avoided, may result in a minor or moderate injury. • Leaking, overheating, or damaged battery could resultin fire or injury. • Use battery with the correct specification for the camera. • Donot short circuit, heat or dispose of battery in fire. • How to use the ASR (Advanced Shake Reduction) mode ............ 15 • System chart ........................... • identification of features ...............
•E(Effect) button ..................... 27 • On camera movie trimming ......... 4t •Special Effect :Colour ............... 27 • Playing back a recorded voice .,,42 • LCD monitor indicator ............... 42 •Special Effect : Preset focus frames .................. 28 • Using the camera buttonsto set the camera ................................. 43 •Special Effect : Composite shooting .................. 29 • Thumbnail / Enlargement button.,,43 •Special Effect :Photo Frame ...... 30 • Voice memo/Up button .....
Please check that you have the correct contents nearest Samsung dealer or Samsung before using this product. The contents < Included Camera case can vary depending on the sales region. To buy the optional equipment, contact your service centre. User manual Product warranty items > Camera strap Software CD Computer PictBridge compatible printer (see p74) (see p77) (see p.57) i i i i DPOF compatible SD memory card/MMC printer (see p.
Mode dial Power button Shutter button Speaker p/ Auto focus lamp m-- USB / AV connection terminal Lens / Lens cover ,-- DC input connection port Microphone _6_
Camera status lamp Zoom Tbutton (Digital zoom) LCD monitor Zoom Wbutton (Thumbnail) E(Effects) button Strap eyelet +/button, Delete button 5function button Tripod socket Play mode / Printer button {7}
iiiilililililililili i!! ! ii ! ! ii i: i! • Self-timer lamp icon Status Description For the first 7 seconds, the lamp blinks at 1 second intervals. Battery chamber cover Blinking Memory card slot Batterychamber ®,s Blinking _,,_ Blinking For the final 3 seconds, the lamp blinks quickly at 0.25second intervals. For the 2 seconds, the lamp blinks quickly at 0.
• Mode icon: Refer topage 15-,18 formore information about the camera mode setting. MODEAUTOPROGRAM A S M _con MODE _con ral ra ASR IB! MOVIE _ [] [] V01CE RE00RDING PLAY Q I_1 Mode] I_1 SCENE MODE NIGHT Icon MODE m SUNSET ,con I_1 PORTRAIT CHILDREN LANDSCAPETEXT [] DAWN I_1 • We recommend using batteriesfor a digitalcamera (Within a year from the date of manufacture).The batteries are listed below.
• There are 4indicators for battery condition that are displayed on the LCD monitor. Battery indicator _ _ Lowbattery Battery status • insert tbe battery as shown - if the camera does not turn on after you have inserted battery, please check whether the battery is inserted with the correct polarity (+/-). - When the battery chamber cover is opened, do not press the battery chamber cover by force. This may cause damage to the battery chamber cover.
• Be sureto format the memory card (see p.63) ff you are using a newly purchased memory for the first time, if it contains data that the camera cannot recognise,or if it contains images captured with a different camera. • Turn off the camera power whenever the memory card is being inserted or removed. • Repeated use of the memory card will eventually reduce the memory cards performance. Should this be the case, you will need to purchase a new memory card.
• When using a 256MB MMC (Multi Media Card),the specified shooting capacity will be as follows. These figures are approximate as image capacities can be affected by variables such as sub .=ctmatter and memory card type. Recorded image size Fine 57 103 180 5M 93 158 271 3M 172 265 425 1M 558 663 742 Print 7M(P) 68 115 206 Wide 6M(W) 84 134 233 • The camera can use SD/SDHC Memory Cards and MMC (Multi Media Cards). Please consult the enclosed manual for using the MMC Cards.
g The LCD monitor displays informationabout the shooting functions and selections. d} @ No. Description 4 Continuous shot 5 @ @ @ @ @ Recording mode _ AEB _ 2 Battery 3 Aperture Value/ ShutterSpeed r'_lO_ IBI IDI I1/] _ OQDD_BI_Dm _ _ C]] F2.8,1/30 [_1Q CZ] Q 6 Self-timer 7 Macro _ @ _ _ _s (_/(_) _s _ _ 8 Metering [] 9 Card insertedindicator _ _ _ p.22~23 r.'l p.37 [] p.37 Auto focus frame _("_ p.18 @ @ 12 Date/Time 2007/01/01 01:00 PM p.
• How touse the AUTO mode (_ ) Please select this mode for quick and easy picture taking with minimal user interaction. 1.insert the batteries (p.10). Insert thebatteries taking note ofthe poladty (+/ -). 2. Insert the memory card (p.10). As this camera has a 20MB internal memory, you do not need to insert the memory card. if the memory card is not inserted, an image wilt be stored in the internal memory. If the memory card is inserted, an image wilt be stored on the memory card. 3.
• How to use the SHUTi-ER PRIORITY mode ( S ) 1. Selectthe SHUlq-ER PRIORITY Mode by rotating the mode dial. • How to use the ASR (Advanced Shake Reduction) mode (_]}) ASR ) Advanced Shake Reduction (ASR) mode. This mode will reduce the effectof camera shake and /f"/_ c,__'_ 2. Set the shutter speed by using the +/-, up/down button. help you get a well-exposed image in dim conditions. Press the ASR button. 3. Press the +/- button twice and take an image.
• Wise Shot • How to usethe SCENE mode ( SCENE 2 images are taken at a time. One is taken inthe FiiFInFlash mode and the other is taken in the ASR mode. You can select and save only one of the images. • How to use the Wise Shot ) Use the menu to easily configure optimal settings for a variety of shooting situations. 1. Select the SCENE mode by rotating the mode dial. 2. Press the menu button and select a desired scene menu. 1. Select the ASR mode by rotating the mode dial. 2.
• How touse the MOVIE CLIP mode (p_l_ ) Amovie dip can berecorded foraslong asthe available recording time ofthe memory capacity allows. 1.Select the MOVIE CLIP mode byrotating the mode dial. 2.The MOVIE CLIP mode icon and available recording time will display onthe LCD monitor. 3.Point the camera towards the subject and compose the image byusing the LCD monitor. Press the shutter button and movie clips are [ MOVE CLIP mode recorded foraslong asthe available recording time.
• Pressing the shutter button down half way. Ughfly press the shutter buttonto confirm focus and flash battery charge. Press the shutter button all way down to take the picture. • How to use the VOICE RECORDING mode ( _ ) A voice can be recorded for as longas the availab}e recordingtime (max:lhour) allows. 1. tn any mode with the exception of Movie c{ipmode, select the VOICE RECORDING mode by pressing the Voice recording button twice. 2. Press the shutter button to record a voice.
• Under certain conditions the auto focus system may not perform asexpected. • The recording mode function can beset upbyusing the camera buttons. -When photographing asubject that has little contrast. -Ifthe subject ishighly reflective orshiny. -Ifthe subject ismoving athigh speed. -When there isstrong reflected light, orwhen the background isvery bright. -When thesubject matter has only horizontal lines orthe subject isvery narrow • Used forturning the camera's power on/ off. (such asastick orflagpole).
• Ifthe menu isnot displayed, this button works as the OPTICAL ZOOM orDIGITAL ZOOM button. • This camera has a5Xoptical zoom and a5Xdigital zoom function. Using both will offer atotal zoom ratio of25X. • TELE Zoom Optical zoom TELE:Pressing the ZOOM Tbutton. This witl zoom into the subject i.e. the subject will appear nearer. Digital zoom TELE:When the maximum (5X) optical zoom isselected, pressing the ZOOM Tbutton activates the digital zoom software.
• While the menu is showing, pressthe UP button to move up the sub menu. When the menu is not displayed on the LCD monitor the UP button operates as the voice recording or voice memo ( _ ) button. You can add your voice-overto a stored still image. Refer to page 18for more information about the voice recording. • Recording a voice memo 1. Rotatethe MODE DIAL to select a RECORDING mode with the exception of MOVIE CLiP mode. 2. Press the VOICE MEMO ( _ ) button.
• While the menu is showing, pressthe DOWN button to move from the main menu to a sub menu, or to move down the sub menu. When the menu is not showing, you can usethe MACRO / DOWN buttonto take macro pictures.The distance ranges are shown below. Press the Macro button until the desired macro mode indicator displayson the LCD monitor.
• Available focusing method, by recording mode (O: Selectable, X: Not selectable, oo:Infinityfocus range) [] B _ • To focus on a subject not positioned in the centre of the picture, use the focus lock function.
• When the menu is displayed on the LCD monitor, pressing the LEFT button makes the cursor shift to the left tab. • When the menu is not displayed on the LCD monitor, the LEFT button operates as the FLASH [Selecting the Auto flash] ( _. )button. • Selecting the flash mode 1. Rotate the MODE DIAL to select a RECORDING mode withthe exceptionof MOVIE CLIP mode. 2. Press the Flashbutton until the desired flash mode indicator displays on the LCD monitor. 3.
• Flash mode indicator Menu tab (_) 3 : Selectable X : Not selectable) Available flash mode, by recording mode Flash mode Description Auto flash If the subject or background is dark, the camera flash will operate automatically. Auto & Red eye reduction If a subject or background is dark, the camera flash will work automatically and wilt reduce the red-eye effectby using the red-eye reduction function.
• Whenthe menuis displayedon the LCD monitor,pressingthe Rightbuttonmakesthe curasrsh_tothe righttab. • Whenthe menuis notdisplayedon the LCDmonitor,the RIGHTbuttonoperatesas the Self-timer(_ ) button.This functionis used when the photographerwouktalso liketo be inthe image. • Selecting the self-timer 1. Rotate the MODE D_ALto select a RECORDING mode withthe exception of VOICE RECORDING mode. 2. Press the SELF-TIMER button untit the desired mode indicatordisplays on the LCD monitor.
• It is possible to add spedal effectsto your images by using this button. • Still image mode : You can select the coIour, outfocus, composite and frame menus. • By using the camera's digital processor, it is possible to add special effectsto your images 1. Press the E button in any recording mode. • Movie clip mode : You can select the colour and stabitiser menus.
• You can make the subject stand out from its surroundings. The subject will be sharp and infocus while making the rest out of focus. 1. Press the E button in the available camera • Moving and changing the focus frame You can change the focus frame after selecting a Range menu. 1. Point the camera towards the subject and compose the image by using the LCD monitor. 2. Press the +/- button. modes(Not available: Movie clip, Voice, Auto, Manual, ASR, Scene). 2.
• You can combine 2 - 4 different shots in a still image 1. Press the E button in the availabIe camera modes(Not available: Movie dip, Voice, Auto, Manual, ASR, Scene). 2. Selectthe _ button. menu by pressing the Left/Right 3. Selecta desired sub menu by pressing the Up/Down buttonand press the OK button.
• Changing a part of composite shot after taking the last shot 1. Aftertaking the last shot, a cursor to select a frame wilt display. Press the Up/ Down/Left/Right button to select the frame. 2. Press the +/- button and an image will be deleted. Composite frame will be activated. 3. Press the Shutter button You can take other images again by using the Up/ Down/Left/Right button and +/- button. 4. Press the OK button againto save the captured image.
4.The photo frame wilt appear. Press the shutter button tocapture animage • This function helps stabiiise images captured during movie recording. You can select this menu only inthe MOVIE CLIP mode. 1.Press the Ebutton inthe Movie clip mode. 2.Press the Left/Right buttons toselect the stabilizer menu tab. 3.Select adesired sub menu bypressing the UP/ DOWN button and press the OK button. - t_ :Movie clip frame stabiliserfunction becomes disabled. - 1_ : Reducescamera shake during movie recording.
• RGB :Allows theuser toadjust the R(Red), G(Green), and B(Blue) values of the images tobecaptured. • Setting RGB Values 1.Press the +/-button, and then use the UP and DOWN buttons toselect the RGB icon (RGB ). The RGB menu bar will appear asshown. 2.Use the UP/DOWN/LEFT and RtGHT buttons toselect the desired RGB value. -Up/Down Button :Navigates between R,G, and Bicons. -Left/Right Button :Changes value ofeach icon. 3.
• White balance :The white balance control allows you toadjust the colours to appear more natural. • Selecting a White Balance 1. Press the +/- button, and then use the UP and DOWN buttons to selectthe white balance icon (AWB). The white balance menu bar will appear as shown. 2. Use the LEFT and RIGHTbuttons to set the white balance to the desired value. The value you set wi] be displayed on the LCD monitor.
• Exposure compensation :This camera automatisaliy adjusts the exposure according tothe ambient lighting conditions. You can also select the exposure value byusing the +/ - button. • You can use the menu on the LCD monitor to set up recording functions. In any mode with the exceptionof VOICE RECORDING mode, pressing the MENU button displays the menu on the LCD monitor. • Compensating Exposure 1.
Menu_b Main menu Sub menu Camera workingmode Page B_UUO_U_mD p.38 Continuous r'l SHOOTING M0fl0nOaptdre AEB 1.Turn on the camera and press the MENU button. A menu for each camera mode appears. However, there is no menu for Voice Recording mode ( _ ). 2. Use the LEFT and RIGHT buttonsto navigate through the menus. Interval SHARPNESS OSD INFORMATION so_ Vivid _ua,',_n_oo ............................................................ DaBQQE_m_a p.3g Basic IOlolOIDaQaal_ 3.
• You can select theimage size appropriate for your application. Mode Normal Print angle Wide angle Stilt Icon [] !_ [] [] _ image mode Size %vieclip r_0de Icon Size 3264X 2448 2592X 1944 [] 800X592 2048X 1536 _ 720X480 1024X 768 3264X 2176 I"_ 640X480 3264X 1824 • You can select the compression ratio appropriate for your applicationof the captured images. The higher the compression ratio, the lower the picture quality.
• If youcannot obtain suitableexposure conditions, you can change the metering method to take brighter pictures. [Multi] : Exposure wilt be calculated based on an average of the available light in the image area. However, the calculation will be biased towards the centre of the image area. This is suitable for general use. [Spot] : Only the rectangular area in the centre of [PROGRAM mode the LCD monitor will be metered for light.
• You can select continuous shot, and AEB (Auto Exposure Bracketing). -[Singie] - [Continuous] :Take one picture only :Images will be taken continuously untit the shutter button is released. Tile shooting capacity depends on the memory. [PROGRAM mode] - [Motion Capture] :This takes 30 sbets per second, when the shutter is pressed and held down. After completing the continuous shooting, images are saved and the images play back on the Rear LCD.
• You can adjust the sharpness of the picture you want to take. You cannot check the sharpness effect on the LCD monitor before you take a picture, because this function is applied only when the captured image is stored on the memory. • in any mode with the exception of VOICE RECORDING mode, youcan check the recording status in the LCD monitor. [PROGRAM mode] Sub menu Soft Description Icon The edges of the image are softened. This effect is suitable for editing images on your PC.
g If the memory card is inserted in the camera, all the camera functions apply only to the memory card. g If the memory card is not inserted inthe camera all the camera functions apply only to the internal memory. g If you have turned on the camera by pressingthe POWER button, you can press the PLAY MODE button once to switch to Play mode and press it again to switch to Recording mode. g You can tum the power on with the play mode button. The camera is turned on in play mode.
•Movie clip capture function :capture still images from the movie clip. • How tocapture the movie clip Steps 1-3 are the same asthose forplaying back amovie clip. 4.Press the Play / Pause button while playing the movie clip. Then press the E button. 5. The paused movie clip is saved in a new file name.
• Playingback a recorded voice Steps from f -2 are the same as those to play back a stiffimage. 3. Select the recorded voice fite and press the Play & Pause button to play back a recorded voice file. • The LCD monitor displays shooting information about the displayed image. _m ®-- - To pause a recorded voice file, while playing it back, press the play & pause button again. - To resume playback of the voice file, press the play & pause button.
•InPlay mode, you can use the buttons onthe camera toconveniently set upthe Play mode functions. •You can view multiple pictures, enlarge aselected picture, and crop and save a selected area ofanimage. •Thumbnail display 1.While animage isdisplayed onfull screen, press the T o, thumbnail button. 2.The thumbnail display will highlight the image that had been showing atthe time the thumbnail mode was selected. 3.Press the 5function button tomove toadesired image. 4.
• The maximum enlargement rate inproportion to the image size. Image size 8M Max,mumenargemenrae X 2.0 7MP 6MW 5M 3M 1M Xl .3 X9.5 X9.0 X8.0 X4.0 • Trimming : You can extract part of the image that you want and save it separately. 1. Select an image that you want to enlarge and press the enlargement button. Press the Menu button and a message will be displayed. 2. Select a desired sub menu by pressing the Left/Right button and press the OK button.
• In Play mode, the play & pause/down button works as follows: - If the menu is displayed Press the DOWN button to movefrom the main menu to a sub menu,or to move down the sub menu cursor. - If a still image with a voice memo, a voice file, or a movie clip is playing In Stop mode : Plays a still image with a voice memo a voice file, or a movie clip. During playback : Temporarilystops playback.
• This deletes images stored on the memory. • Deleting Images in Play Mode 1. Select an image that yea want to delete by pressing the LEFT/RIGHT button and press the DELETE( t_ ) button, 2. A message will display as shown alongsideon the LCD monitor. 3. Select the sub menu values by pressing the LEFT/ RIGHT button and then press the OK button. If [Yes] is selected : deletes the selected images. If [No] is selected : cancels "Delete Image". _,46} • Deleting Images in Thumbnail Display Mode 1.
• Ifyou select [Computer] sub menu inthe [USB] setup menu, [Connecting Computer] message will display when you connect the camera toyour printer and the connection will not beestablished. Inthis case, press thePrinter button. [Connecting Printer[ message will display and the Easy printing mode will beselected. *tnsome instances the camera may not connect tothe printer, this will depend on the manufacturer oftheprinter. -After the connection, the Easy printing menu wilt display ontheLCD monitor.
• PLAY mode functions can be changed by using the LCD monitor. _nthe PLAY mode, pressing the MENU button displays the menu on the LCD monitor.The menus you can set up in Play mode are as follows. To capture an image after setting up the play menu, press the PLAY mode button or shutter button.
• This menu is availablewhile the camera is connectedto a PictBridge supporting printer (direct connection to the camera, sold separately)with a USB cable. Menu tab Main menu Sub menu Secondarymenu Menu tab Main menu Type AUTO SET Auto p.58 Yes Draft Auto [] PostCard CUSTOM SET Quality Date On 2L Auto File Name A4 Auto Standard p.58 PRINT Furl 1 Index p.59 No DPOF PRINT 2 4 Off On A3 Layout Off L Letter [] p.
• Images can be displayed continuously at pre-set intervals. You can view the slide show by connecting the camera to an external monitor. f. Press the play mode button and press the menu button. 2. Press the LEFT / RIGHT button and selectthe [SLIDE] menu tab. • Start the slide show :The slide show can startonly in the [Show] menu. 1. Use the Up/Down buttons to select the [Show] menu and press the Right button. 2. Select a desired sub menu by pressing the Up/Down button.
• You can check shooting informationabout the displayed image. • Hew to select the type of information you want to see 1. Press the play mode button and pressthe menu button. 1. Press the play mode button and press the menu button. 2. Press the LEFT/RIGHT button and selectthe 2. Selectthe [OSD INFORMATION] menu tab by pressingthe LEFT/RIGHT button. 3. Select a desired sub menu by pressing the UP/ DOWN button and press the OK button. [Full] [Basq • You can rotate the stored images by various degrees.
• Change the resolution (size) ofpictures taken. Select the[User Image] tosave animage tobethe start-up image. The resized image will have anew file name. f.Press the play mode button and press the menu button. 2.Press theLEFT/RIGHT button and select the [RESlZE] menu tab. 3.Select adesired sub menu bypressing the UP/ DOWN button and press the OK button. • Image Resize Types ...............
• This is used to protect specific shots from being accidentally erased (Lock). It also unprotects images that have been previously protected (Unlock). • Protecting Images 1. Press the play mode button and pressthe menu button. 2. Press the LEFT/RIGHT button and selectthe [PROTEC]] menu tab. 3. Select a desired sub menu by pressing the UP/ DOWN button and press the OK button. [Select ] : Selection window for an image to be protected/released is displayed.
• This enables you to copy image files, movie clips and voice recording files to the memory card. • Copying to the Memory Card 1. Press the play mode buttonand press the menu button. 2. Select the [COPY TO CARD] menu tab by pressing the LEFT/RIGHT button. 3. Select a desired sub menu by pressing the UP/ DOWN button and press the OK button. -[No] : Cancets "Copy to Card".
DPOF(Digital Print Order Format) allows you to embed printing informationon your memory cards MISC folder. Select the pbtures to be printed and how many prints to make. BThe DPOF indicatorwill display on the LCD monitor when an image that has DPOF information plays back. Imagescan then be printed on DPOF printers, or at an increasing number of photo labs. This function is not availablefor Movie clips and Voice recording files.
• Images (except for movie clips and voice file) are printed as indextype. 1. Press the play mode buttonand press the menu button. 2. Press the LEFT/RIGHT button and select the [DPOF] menu tab. 3. Select the [Index] menu by pressing the UP/ DOWN button and press the RIGHT button. 4. Select a desired sub menu by pressing the UP/ DOWN button. If [No] is selected : Cancel the index print setting. If [Yes] is selected : The image will be printed in index format. 5. Press the OK button to confirm the setting.
• You can use the USB cable toconnect this camera toaprinter that supports PictBridge (sold separately) and print the stored images directly. Movie clips and voice files cannot beprinted. • Setting upthe camera for connection with the printer 1.Inany mode with theexceptionof Voice Recording mode, press the MENU button. 2. Press the LEFT/RIGHT button and select [SETUP] menu tab. 3. Select [USB] menu by pressing the UP/DOWN button and press the RIGHT button. 4.
• Setting the Number of Copies to Print - Select [One Pic] or [All Pics]. A screen where you can set the number of copies to print will appear as shown below. • AUTO SET 1. Use the LEFT and RIGHT buttons to select the [AUTO SET] menu tab. 2. Use the UP and DOWN buttons to selectthe desired sub menu value, and then press the OK button. [No] : [CUSTOM SE]7 values are kept. [Yes] : All values in the [CUSTOM SET] are automatically changed.
Menu Size Layout Function Settingthe size of the printing paper Sub menu Auto, PostCard,Card 4x6, L. 2L, Letter, A4, A3 Settingthe number of pictures to be printed on a sheet of paper Auto, Full 1, 2. 4, 8.
• DPOF Print :This allows you todirectly print the files with DPOF information.• Initialises user-changed configurations. f.Use the LEFT and RIGHT buttons toselect the 1.Use the LEFT and RIGHT buttons toselect the [DPOF PRIN'[] menu tab. [RESEll menu tab. 2.Use the UP and DOWN buttons toselect the 2.Use the UP and DOWN buttons toselect the desired sub menu value and then press the desired sub menu value, and then press the ON OK button. button.
gInthis mode, you can set upbasic settings. You can use the setup menu inall camera modes except Voice Recording mode. The items indicated by are default settings. Menu tab Main menu File Power Off Language Format Sub menu Secondary menu Reset Page Menu tab Main menu World Time p.62 Off, 1_3;5,10rain p.
[ File name ] [ Autopower off ] • This function allows the user to selectthe file naming format. • This function switches the camera off after a set amount of time in order to prevent unnecessary battery drainage. • Assigning File Names 1. tn any mode with the exception of Voice Recording mode, press the MENU button. 2. Press the LEFT/RIGHT buttonand select the [SETUP] menu tab. 3. Select the [File ] menu by pressingthe UP/ DOWN button and press the RIGHT button. 4.
[ Formattinga memory ] • This is used for formatting the memory. If you run [Format] on the memory, all images, including the protected images, will be deleted. Be sure to download important images to your PC before formatting the memory. • Sub menus [No] : The memory will not be formatted. Press the menu button three times and the menu display wiltdisappear. [Yes] : A [ProceseingE]message appears and the memory will be formatted. If you run FORMAT in Play mode, a [No Image!] message will appear.
[World Time ] [ Auto Focus lamp] R This menu enables you to displaythe local date and time on the LCD monitor. • You can turn on and off the Auto Focus lamp. • Sub menus [Off] :The AF lamp will not light up in a low light condition. [On] :The AF lamp will light up in a low light condition. [ Imprintingthe recordingdate ] [ Sound ] • There is an option to include DATE / TIME on still images.
[ Connectingan ExternalDevice(USB)] • You can select an external device to which you want to connect the camera using the USB cable. • Sub menus - [Computer] : Selectthis if you want to connect the camera to your PC. Refer to page 77 for instructions on how to connect the camera to your PC. - [Printer] : Selectthis if you want to connect the camera to your printer.
- NTSC : U.S.A, Canada, Japan, South Korea, Taiwan, Mexico. [ Quickview ] - PAL : Australia, Austria Belgium, China, Denmark, Finland Germany, U.K. Holland, Italy, Kuwait,Malaysia, New Zealand, Singapore, • If you enable Quick View before capturing an image, you can view the image you just captured on the LCD monitor for the duration set in the [Quick View] setup. Quick view is possible only with still images. Spain, Sweden Switzerland Thailand, No_,ay.
• You can set upastart upimage, start upsound and shutter sound. Every camera working mode (with the exception ofVoice recording mode) has the MyCAM menu. The items indicated by are default settings. Menu tab Main menu Sub menu Page LOGO Start Image User p.67 Image I User Image 2 • You can select the sound that is activated whenever the camera is turned on.
Be sure to observe the following precautions! • This unit contains precision electronic components. Do not use or store this unit in the following locations. - Areas exposed to severe changes in temperature and humidity. - Areas exposed to dust and dirt. - Areas exposed to direct sunlightor the inside of a vehicle in hot weather. - Environments where there is high magnetism or excessive vibration. - Areas with high explosives or highly flammable materials.
• Camera Maintenance -Use asoft brush (available from photo stores) togently clean thelensand LCD assemblies• If this does not work, lens-cleaningpaper with lens cleaning fluid can be used. Cleanthe camera body with a soft cloth• Do not allow this camera to come into contact with solvent materials such as benzol, insecticide,thinners etc. This may damage the body sbeltof the camera and also affect its performance. Rough handling can damage the LCD monitor.
Low Battery! - There is low battery capacity Insett fresh batteries. Low Light! - When taking pictures in dark places Take pictures in Flash Photography mode. Battery power quickly drains • The Camera is being used in low temperatures Keep the camera in warm conditions (i.e.
The images are unclear • A picture was taken the subject without setting an appropriate macro mode Select an appropriate macro mode to take a clear image.
• Image Sensor - Type : 1/1.8" CCD • Exposure - Control : Program AE, Shutter Priority AE, Aperture PriorityAE or Manual - Effective Pixel :Approx. 8.1Mega-pixel - Total Pixel :Approx. 8.3Mega-pixel Exposure - Metering : Multi, Spot - Compensation : +2EV (1/2EV steps) - ISO Equivalent :Auto, 50, 100,200, 400, 800, 1600 • Lens - Focal Length : SliD f = 7.8 N 39mm (35mm film equivalent :38 ~ 190mm) - F No. : F2.8_4.4 - Digital Zoom :, Still Image mode : 1.OX~ 5.0X • Play mode : 1.0X _ 12.
-Movie Clip :. With Audio (recording time :memory capacity dependent) • Size: 800x592 720x480, 640x480 320x240 g Image Play - Type : Single image, Thumbnails, Slide show, Movie Clip • Frame rate :30 fps, 20 fps, 15 fps (15/20 fps for 800x592, 720x480) - Editing :Trimming, Resizing Rotate, Color Effect g Interface • Stabifizer . Optical Zoom :up to 5.0X - Digitaloutput connector : USB 2.0(High Speed) - Audio : Mono g Storage - Media :.
Please ensure that you read the instruction manual carefully before use. •The attached software isacamera driver and image editing software tool for Windows. •Under nocircumstances should altorpart ofeither the software orthe user manual bereproduced. •Copyrights forsoftware are licensed only foruse with acamera. •Inthe unlikely event ofamanufacturing fault, we will repair orexchange your camera. We cannot, however, be held responsible in any way for damage caused by inappropriate use.
• To use this camera with a PC, install the application software first. Afterthis has been done, the stored images in the camera can be moved to the PC and can be edited by an image editing program. • You can visit the Samsung web-site through the internet. http://www.samsungcamera.com :English http://www.samsungcamera.co.kr: Korean 1. The auto runframe will display. Click the [install] menu in the Auto run frame. 2.
3.After restarting the computer, connect the PC tothe camera with theUSB cable. 4.Turn the camera power on. The [Found New Hardware Wizard] will open and the computer will recognise the camera. ÷Ifyour OS isWindows XP, animage viewer program will open. Ifthe download window ofDigmax Master opens after starting Digimax Master, the camera driver was set upsuccessfully.
• _fyou connect the USB cable to a USB port on your PC and then turn on the power, the camera will automaticallysw4tchto "computer connection mode". • _nthis mode, you can download stored images to your PC through the USB cable. • Connecting the camera to a PC • The LCD monitor is always turned off in PC mode. • Connecting the camera to a PC 1. In any mode with the exception of Voice Recording mode, press the Menu button. 2. Press the LEFT/RIGHT button and selectthe [SETUP] menu tab. 3.
• Downloading stored images You can download the still images stored on the camera to your PC'shard disk and print them or use a photo editing software to edit them. 6. Press the rightmouse button and a pop-up menu will open. Click [Paste]. 1. Connect the camera to your PC with the USB cable. 2. On your computer's desktop display, select [My computer] and double click [Removable Disk _ DCtM _ 100SSCAM]. The image files will then be displayed. 7. An image file is transferred from the camera to your PC.
• %ndows 98/98SE 1. Check whether the camera and PC are transferring a file. If the camera status lamp blinks, please wait until the lamp has finished blinking and is constantly on. 2. Unplug the USB cable. • Windows 2000/ME/XP 5. A [Safe to Remove Hardware] window will open. Click the [OK] button. 6. A [Unplug or Eject Hardware[window will open. Click the [Close] button and the removable disk wilt be removed safely. (The illustrationsmay differ from those shown depending on the Windows O/S.) 1.
1. A USB Driver for MAC is not included with the software CD as MAC OS supports the camera driver. 2. Check the MAC OS version during start-up. This camera is compatible with MAC OS 10.0~ 10.3. 3. Connect the camera to the Macintosh and turn the camera power on. 4. A new icon witl be displayed on the desktop after connectingthe camera to the MAC. • To remove the USB driver, refer to the process shown below. 1. Connect the camera to your PC and turn them on. 2.
• You can download, view, edit and save your images and movies with this software. This software isonly compatible with Windows except for the Windows 98. • To start the program, click [Start _ Programs _ Samsung _ Digimax Master Digimax Master]. • Downloading images 1.Connect the camera toyour PC. 2.Awindow fordownloading images wilt display after connecting the camera toyour PC. - To download the captured images, select the [Select All] button.
• Image viewer :You can view the stored images. • image edit : You can edit the still image. - Image viewer functions are listed below. G?Menu bar : You can select menus. File, Edit, View, Tools, Change functions, Auto download, help, etc. - Image edit functions are listed below. (i) Edit menu : You can select the following menus. [Tools] : You can resize or crop the selected image. See the [Help] menu. [Adjust] : You can modify image quality. See the [Help] menu.
• Movie edit : You can get the still image movie dip. narration, music files together in a movie clip. • Please check the following if the USB connection malfunctions. USB cable is not connected or it is not the supplied USB cabIe. Connect the supplied USB cabIe. The camera is not recognised by your PC. Sometimes, the camera may appear under [Unknown Devices] in Device Manager. Installthe camera driver correctly.
When I open the Device Manager (by clicking Start _ (Settings) Control Panel _ (Performance and Maintenance) _ System (Hardware) _ Device Manager), there are Unknown Devices or Other Devices entries with a yellow question mark(?) beside them or devices with an exclamation mark(!) beside them. Right-clickon the entry with the question (?) or exclamation d) mark and select "Remove". Restart the PC and connect the camera again.
• When the DirectX 9.0 orlater isnot installed Install theDirectX 9.0 orlater Equipment) Correct Dieposal ofThis Product (Waste Electrical & Electronic (Applicable in the European Unionand other European countries with 1)Insert the CD provided with the camera separate collection systems) This marking shown on the product or its 2)Run the windows explorer and select the [CD-ROM drive:\ USB Driver\DirectX 9.0] folder and click the DXSETUP.exe file.
M Declaration of Conformity Trade Name :SAMSUNG TECHWIN Mode_No. : DigimaxS850 Responsible Party :Samsung Opto-Electronics America tNO. Address :40 Seaview Dr. Secaucus,NJ 07094 Telephone No. :201-902-0347 This device complies with Part 15of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received including interference that may cause undesired operation.
(87}
{88}
SAMSUNGTEOHWlNOO, LTD. SAMSUNGFRANCESAS SAMSUNGOPTO_ELEOTRONIOS UK LIMITED OPTICS& DIGITALIMAGINGDIVISION BP51TOURMAINEMONTPARNASSE 33, 145-3,SANGDAEWONI-DONG, JUNGWONGU, AV .DUMAINE75755,PARISOEDEX15,FRANCE HOTLINEPHOTONUMERIQUE: SAMSUNGHOUSE1000HILLSWOODDRIVE HLSWOOD BUSINESSPARK SUNGNAM-OITY, KYUNGKI-DO,KOREA 462-121 CHERTSEYKT16 OPSU.
