$860 $760 fhank youor buyinga Samsun90a__ea Thismanual_t guideyoutx_e@ usingthe camea nc_d nf_ cap _. n9 sages downoadingmages andusn9 the app caton sofws e Pease_eadtis mansa ca efuly be!oe usingyou_newcamerx_ ]his _Yan.
instructions Getting to Know your camera Use this camera in the following order. Thank you for buying a Samsung Digital Camera. Before connecting the camera to a PC, via the USB cable, you will need to set up the camera driver. Insta!l driver that is contained in CD-ROM. (p.79) into oPrior to using this camera, please read the user manual thoroughly. oil you require After Sales service, please bring the camera and the cause of the camera malfunction (such as battery, Memory card etc.
Danger DANGER indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. Warning WARNING indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. • Do not attempt to modify this camera in any way. To do so may result in fire, injury, electric shock or severe damage to you or your camera, internal inspection, maintenance and repairs should only be carried out by your dealer or Samsung Camera Service centre.
Caution CAUTION indicates a potentially hazardous situation which, if not avoided, may result in a minor or moderate injury. • Leaking, overheating, or damaged battery could result in fire or injury. - Use battery with the correct specification for the camera. - Do not short circuit, heat or dispose of battery in fire. - Do not insert the battery with the polarities reversed. • Remove the battery when not pla_[h_ to use the camera for a long period of time.
Contents 021 Things to Watch Out for When Taking Pictures 022 Using the camera buttons to set the camera SETUP Q 038 camera settings 022 POWER button 022 SHUTTER button 038 Auto Focus type 022 ZOOM W / T button 039 Voice Memo 024 Face Detection(FD) button 039 Voice Recording 025 Function Description / Info / Up button 040 Recording the movie clip without voice 026 Macro / Down button 040 SCENE mode 027 Focus lock 041 Sound menu 028 Flash / Left button 041 Sound 030 Sel
Contents PLAY 046 Formatting a memory 057 046 Initialisation 057 047 File name 059 047 imprinting the recording date 048 Auto power off 060 Starting the Multi Slide Show 048 Selecting Video out type 060 Start the Multi Slide Show 049 Auto Focus lamp 061 Selecting Images 049 Selecting a battery type 061 Configure Multi Slide Show effects 062 Setting ptay interval 050 Starting play mode E (Effect) button : Rotating an image E (Effect) button : Cotour Setting up the play back f
Contents (6) SOFTWARE 077 Software Notes 77 077 System Requirements 078 About the software 079 Setting up the application software 081 Starting PC mode 084 Removing the removable disk 085 Setting up the USB Driver for MAC 085 Using the USB Driver for MAC 085 Removing the USB Driver for Windows 98SE 086 Samsung Master 089 FAQ
System chart Please check that you have the correct contents before using this product. The contents can vary depending on the sales region. To buy the optional equipment, contact your nearest Samsung dealer or Samsung service centre.
identification of features Front & Top Mode dial.
identification of features Back Camera status tamp button (Thumbnail) (Digital zoom) (FD) button (Effects) button LCD monitor-- • -........
identification of features Bottom / 5 Function button Self-timer lamp Battery chamber cover Tripod socket Memory card slot Battery chamber Function Description / information / Up button MENU / OK button Blinking - For the first 8 seconds, the lamp blinks at 1 second intervals. - For the final 2 seconds, the lamp blinks quickly at 0.25-second intervals. _t_)2S Blinking For the 2 seconds, the lamp blinks quickly at 0.25-second intervals. _..
identification of features Connecting to a Power Source Mode icon We recommend batteries for a digital camera (Within a year from the date of manufacture). The batteries are listed below. - Non rechargeable batteries : 2 X AAAIkaline (High Capacity) - Rechargeable batteries (Optional) : SNB-2512 (Ni-MH) Refer to page 16 for more information about the camera mode setting.
Connecting to a Power Source inserting the memory card [] insert the battery as shown [] Insert the memory card as shown. - If the camera does not turn on after - Turn off the camera's power before inserting the memory card. - Have the front of the memory card facing toward the front of the camera (lens) and the card pins toward the back of the camera you have inserted battery, please check whether the battery (+ / -).
instructions on how to use the memory card • Be sure to format the memory card (see p.46) if you are using a newly purchased memory card for the first time, if it contains data that the camera cannot recognise, or if it contains images captured with a different camera. • Turn off the camera power whenever the memory card is being inserted or removed. • Repeated use of the memory card will eventually reduce the memory card's performance. Should this be the case, you wilt need to purchase a new memory card.
instructions on how to use the rnerno_ card The camera can use SD/SDHC Cards). Memory Cards and MMC (Multi Media When using a 256MB MMC memory, the specified shooting capacity will be as follows. These figures are approximate as image capacities can be affected by variables such as subject matter and memory card type.
LCD monitor indicator [] The LCD monitor displays information about the shooting functions and selections. _{!!i!@i;_ii_i_i!i!!!!_i!_i!_i!_i!!i!!i!!i!_i!_i!i!i!iiiiiiiiiii Memory card icon / Internal memoryicon D/[_D Battery p.12 $860 Image Size _[]DI_E_DO_ p.34 $760 ImageQuality/ FrameRate iiii iii :-: /_ [] Metering Sharpness ISO p.34 E,3 p.35 ILl ILl [] [] [] p.35 ISO p.36 ISO ISO ISO ISO ISO_ White Balance [Image & Full Status] I Recording mode p.
Starting the recording mode How to use the Auto mode How to use the Pro_ Select this mode for quick and easy picture taking with minimal user interaction. Selecting the automatic mode will configure the camera with optimal settings. You can still manually configure all functions except the aperture value and shutter speed. 1. Insert the batteries (p.12). Insert the batteries taking note of the polarity (+ /-). 2. Insert the memory card (p.12).
Starting the recording mode How to use the Manual mode How to use the DIS mode You can manually configure all functions aperture value and shutter speed. Digital Image Stabilisation (DIS) mode. This mode will reduce the effect of camera shake and hetp you get a well-exposed image in dim conditions. 1. Select the MANUAL mode by rotating the mode dial. 2. Press the Fn button and menu for the shutter speed and aperture value will display.
Starting the recording mode _the Photo Help guide mode ( Helps the user learn the correct picture taking method and includes solutions for potential problems that may_:" occur. This also enables the user to practice the best __ way to take the pictures. _,. _ _%_ _'%1 j._;_ Pressing the Pressing the Left/Right button -..
Starting the recording mode How to use the Portrait mode Please select this mode for quick and easy portraits. Select Portrait mode using mode dial. The scene modes are listed below. [Nightscene] (_ ) : Use this for shooting still images at night or in other dark conditions. [Children] (_ ) : To take a picture of fast moving objects, [Landscape] (_ ) : To take pictures of distant scenery.
Starting the recording mode How to use the Movie A movie clip can be recorded for as tong as the available recording time of the memory capacity allows. 1. Select the Movie clip mode by rotating the Mode dial. ( The Movie clip mode icon and available recording time will display on the LeD monitor.). _--__.,_ (_:_ _ _OL_ -_ clips are recorded for as long as the available recording time allows. Movie clips will still be recorded if the shutter button is released.
Things to Watch Out for When Taking Pictures • Pressing the shutter button down halfway. Lightly press the shutter button to confirm focus and flash battery charge. Press the shutter button all way down to take the picture. [Lightly press the shutter button] Dress the shutter button] • Under certain conditions the auto focus system expected. - When photographing a subject that has little - If the subject is highly reflective or shiny. - If the subject is moving at high speed.
Using the camera buttons to set the camera ZOOM W / T button The recording mode function can be set up by using the camera buttons. If the menu is not displayed, this button works as the OPTICAL ZOOM or DiGiTAL ZOOM button. POWER button Used for turning the camera's power on / off. If there is no operation during the specified time, the camera's power will be turned off automatically to save battery life. Refer to page 48 for more information about the auto power off function.
ZOOM W / T button [] WIDE Zoom Optical zoom WIDE [TELE zoom] [Optical zoom 2X] Digital zoom WIDE Opticalzoom [ q I I : Pressing the ZOOM W button. This will zoom out from the subject i.e. the subject will appear further away. Pressing the ZOOM W button continuously will set the camera to its minimum zoom setting i.e. the subject appears at its furthest from the camera. m!x 3,0 Digitalzoom [Digital zoom 3.OX] o Images taken using the digital zoom may take a little longer for the camera to process.
Face Detection FJFD_ button [] Face Detection(FD): This mode detects the face position of the subject automatically and then sets the focus and exposure. Select this mode for quick and easy face picture. Setectabte modes: Auto, Program, Manual, DIS, Portrait, Children, Beach & Snow 1. Press the FD(Face Detection) button ( _ ) in the selectable modes. The FD icon wilt be displayed on the screen left side. o o • • • • • This function can detect up to 9 persons.
Face DetectionFJFDJ button [] Self Portrait When taking pictures of yourself, the area of your face is automatically detected so that you can take self pictures more easily and quickly. Selectable modes: Auto, Program, Manual, DIS, Portrait, Beach & Snow Function Description / Info ( IE]I) / Up button While the menu is showing, the Up button operates as a direction button.
Macro( ) / Downbutton While the menu is showing, press the DOWN button to move from the main menu to a sub menu, or to move down the sub menu. When the menu is not showing, you can use the MACRO / DOWN button to take macro pictures. The distance ranges are shown below. Press the Macro button until the desired macro mode indicator appears on the LCD monitor.
Macro( _ ) / Downbutton Focuslock [] Available focusing method, by recording mode ( o : Setectable, oo : infinity focus range) To focus on a subject not positioned in the centre of the picture, use the focus lock function. iliiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii!ii!i!ili _i_ili_!:!IJ_ ¸i_i_ii!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i_i [] 0 [] [] [] [] o [] Using the Focus Lock o 1. Ensure the subject is in the centre of the autofocus frame. o o o o 2. Press the SHUTTER button halfway.
Flash ( _ ) / Left button When the menu is displayed on the LCD ] monitor, pressing the LEFT button makes the cursor shift to the left tab. When the menu is not displayed on the LCD monitor, the LEFT button operates as the FLASH button. o o [Selecting the Auto flash] [] Selecting the flash mode 1. Press the Mode button to select a RECORDING mode with the exception of the Movie clip mode or the DIS mode.(p.16) 2.
Flash ( _ ) / Left button [] Ftash mode indicator _A Auto flash @ Auto & Red eye reduction Fill in flash _S Available flash mode, by recording mode ( o : Setectabte' If the subject or background is dark, the camera flash will operate automatically. If a subject or background is dark, the camera flash will work automatically and will reduce the red-eye effect by using the redeye reduction function. o o o The flash fires regardless of the available light.
Self-timer ( _ ) / Right button When the menu is displayed on the LCD monitor, pressing the Right but- [] Selecting the self-timer ton makes the cursor shift to the right tab. When the menu is not displayed on the LCD monitor, the RIGHT button 1. Rotate the Mode dial to select a desired RECORDING mode. operates as the Self-timer ( _ ) button. This function is used when the photographer would also like to be in the image. 2. Press the SELF-TIMER / RIGHT (d..
MENU / OK button Self-timer ( _ ) / Right button [] MENU button [] Motion Timer f4 Pressing the Shuter button after setting the Motion Timer Blink (1 second interval) Detecting the subject's movement Blink (0.25 second interval) No movement is detected Turn on and the image is taken after 2 seconds - When you press the MENU button, a menu related to each camera mode will be displayed on the LCD monitor. Pressing it again wilt return the LCD to the initial display.
button It is possible to add special effects to your images by using this button. 1. Select a desired sub menu by pressing the Up/Down button and press the OK button. [] Available Effects, by recording mode ( o : Setectabte) o This button will not operate in DIS, Voice recording mode and some scene modes (Nightscene, Text, Sunset, Dawn, Backlight, Firework, Beach&Snow). • Even if the camera is turned off, the effect setting will be preserved. • To cancel the settings, select ( _'_ ).
Fn button How to use the Fn menu You can use the Fn button to set the following menus. ( o : Setectabie) N o o o o o o p.34 1. Press the Fn button in an available mode. 2. Select a desired menu by pressing the Up / Down button. And then a sub menu wilt be displayed at the bottom right of the LCD monitor. Up / Down button 3. Select a desired menu by pressing the Left / Right button and then press the OK button.
Size Quality/Frame You can select the compression ratio appropriate for your application of You can select the image size appropriate for your application. - $860 (Unit: pixel) 640 x 480 rate the captured images. The higher the compression picture quality. ratio, the lower the 320 x 240 -$760 [ STILL IMAGE mode ] [ STILL iMAGE mode ] [ MOVIE CLIP mode ] • The higher the resolution, the lower the number of shots available because high resolution images require more memory.
Metering Sharpness If you cannot obtain suitable exposure conditions, you can change the You can adjust the sharpness of the picture metering method to take brighter pictures. you are about to take. You cannot check the sharpness effect on the LCD monitor before you [Multi]: Exposure will be calculated based on an average of the available light in the image area. However, the calculation will be biased towards the centre of the image area. This is suitable for general use.
ISO White balance You can setect the ISO sensitivity when taking pictures. The speed or specific tight-sensitivity of a camera is rated by ISO numbers. The white balance control allows you to adjust the cotours to appear more natural. [Auto] : The camera's sensitivity is automatically changed by variables such as lighting value or subject brightness. [ISO 80, 100, 200,400,800, 1000 ] : You can increase the shutter speed while the same amount of light is present, by increasing the ISO sensitivity.
White balance Exposure compensation [] Using the Custom White Balance White balance settings may vary slightly depending on the shooting environment. You can select the most appropriate white balance setting for a given shooting environment by setting up the custom white balance. This camera automatically 1. Select the CUSTOM ( _m_ ) menu of the White Balance and place a sheet of white paper in front of the camera so that the LCD monitor shows only white. 2.
Usingthe LCDmonitorto adjustthe camerasettings Recording_j You can use the menu on the LCD monitor to set up recording functions. [] The items indicated by are default settings. Auto Focus tyj_e You can select your preferred Focus Area according to the shooting conditions. MultiAF FoucsArea VoiceMemo iiiiiiiiiiiiiii;!i;!i;!i;!i;!i;!i;!i;!i;!i;!i;!ii!;i!ili!ililil On Dmg_B Bn_mm Q p.38 D_SD p.39 []DDmB-Voice Record (Recording) Voice Mute D[]BmQ p.39 D p.40 mDDDn BmBm_ p.
Recording(_) Voice Memo Voice Recordin9 You can add your voice-over to a stored still image. (Max. 10 sec.) A voice can be recorded for as tong as the available recording time (Max. 10 hour) allows. - If the voice memo indicator is displayed on the LCD monitor, the setting is completed. - Press the shutter button and take a picture. The picture is stored on the memory card. Press the shutter button to record a voice.
Recording(_) Voice RecordincL Pausing while recording a voice Using this function, you can record your favourite voice clips into a voice recording file without having to create multiple voice recording files. Recordincjthe movie clip without voice You can record the movie without voice. Select [On] of [Voice Mute] menu in the Movie clip mode. ((_)) icon will appear on the LCD monitor. Press the Shutter button and a movie will record for as long as the memory capacity allows without voice. 1.
Sound Sound menu In this mode, you can set up sound settings. You can use the setup menu ) Volume in all camera modes, except Voice Recording mode. [] The items indicated by You can select a volume of start up sound, shutter sound, beep sound and AF sound. are default settings. - [Volume] sub menu :[Off], [Low], [Medium], [High] Off Volume Low DDmmQ D p.41 High Start Sound Sound 1 Sound 2 Sound 3 _WDm DDDBH DDmm_ D p.41 OnDDB DDBm_ D p.41 _mmD_ DDBDH DDBm_ D p.
Sound ) Sound If you set sound to ON, various sounds will be activated for camera startup, when buttons are pressed, so that you can be aware of the camera operation status. Setup menu In this mode, you can set up basic settings. You can use the setup menu in all camera modes, except Voice Recording mode. m The items indicated by - [Beep Sound] sub menu : [Off], [Sound 1,2, 3] are default settings.
Setup menu Display ( [_ ) There is a choice of language that can be displayed on the LCD moni- LA,SanFrancisco Denver, Phoenix tor. Even if the battery is removed and inserted again, the language setting will be preserved. Chicago,Dallas NewYork, Miami Date & Time World Time Caracas,La Paz Newfoundland p.44 BuenosAires Mid-Atlantic CapeVerde Logo Start Image (Display) p.44 User image Dark LCD Bright p.
Display( [_ ) the Date / Time / Date tyjpe You can change the date and time that will be displayed on the captured images and set up the date type. Setting [World Time] enables you to display the local date and time on the LCD monitor when travelling overseas. [] Date type : [yyyy/mm/dd], [Off], [dd/mm/yyyy], [mm/dd/yyyy] Start You can select the image that is first displayed on the LCD monitor whenever the camera is turned on.
Display( [_ ) Quick view LCD save If you enable Quick View before capturing an image, you can view the image you just captured on the LCD monitor for the duration set in the [Quick View] setup. Quick view is possible only with still images. If you set the [LCD save] to On and the camera isn't operated during the specified time, the LCD monitor wilt be turned off automatically. [Off] - Sub menus [Off] : The LCD monitor will not be turned off. - Sub menus : The quick view function can't be activated.
Formattin_ Initialisation This is used for formatting the memory. If you run [Format] on the memory, all images, including the protected images, will be deleted. Be sure to download important images to your PC before formatting the memory. All camera menu and function settings will be restored to their default values. However, values for DATE / TIME, LANGUAGE, and VIDEO OUT wilt not be changed. - Sub menus [No] : The memory will not be formatted. [Yes] : A window for confirming the selection displays.
File name the recordincidate This function allows the user to select the file naming format. [Reset] - Sub menus :After using the reset function, the next file name will be set from 0001 [Off] even after formatting, deleting all or inserting a new memory card. [Series] : New files are named using numbers that follow the previous sequence, even when a new memory card is used, or after formatting, or after deleting all pictures.
Auto power off This function switches the camera off after a set amount of time in order to prevent unnecessary battery drainage. -Sub menus [oH : The power off function wilt not operate. [1,3, 5, 10 min] :The power will turn off automatically if not used for the period of time specified. - After replacing the battery, the power off setting will be preserved.
-NTSC :U.S.A, Canada, Japan, South Korea, Taiwan, Mexico. -PAL:Australia, Austria, Belgium, China, Denmark, Finland, Germany, U.K., Holland, Italy, Kuwait, Malaysia, New Zealand, Singapore, Spain, Sweden, Switzerland, Thailand, Norway. -When using aTVasanexternal monitor, you wiltneed toselect the external orAV channel oftheTV. -There willbeadigital noise ontheexternal monitor, butitisnota malfunction. -Iftheimage isnotinthecentre ofthescreen, use theTVcontrols to centre it.
Starting.p_v mode Turn the camera on and select Play mode by pressing the play mode button ( _ ). The camera can now play back the images stored in the memory. If the memory card is inserted in the camera, all the camera functions apply only to the memory card. If the memory card is not inserted in the camera, all the camera functions apply only to the internal memory. Playi_qback a still ima_ 1. Select the PLAY mode by pressing the play mode button ( _ ). 2.
Starting.__Jaymode _ture function _q You can capture still images from the movie clip. [] How to capture the movie clip 1. Press the Play / Pause button( _ ) while playing the movie clip. Then press the E button. 2. The paused movie clip is saved in a new file name. [Paused] The captured movie clip file is the same size as the original movie clip (640x480, 320x240). When you press the E button at the beginning of the movie clip, the first frame of the movie clip will be saved as a still image. 1.
LCD monitor indicator Using the camera buttons to set the camera The LCD monitor displays shooting information about the displayed image. (1) ® ® ® In Play mode, you can use the buttons on the camera to conveniently set up the Ptay mode functions. Thumbnail ( X ) / Enlargement( o, ) button You can view multiple pictures, enlarge a selected picture, and crop and save a selected area of an image. [] Thumbnail display 1. While an image is displayed on fult screen, press the thumbnail button. 2.
Thurnbnail _ /Enlar ernent _ button [] Image enlargement [] The maximum 1. Select an image that you want to enlarge and press the enlargement button. 2. Different parts of the image can be viewed by pressing the 5 function button. 3. Pressing the thumbnail button will zoom back to the original full sized image. - You can tell whether the image displayed is an enlarged view by checking the image enlargement indicator shown at the top left of the LCD monitor.
button Play & Pause ( _ When the menu is displayed on the LCD monitor, the UP button operates as a direction button. When the menu is not displayed on the LCD monitor, pressing the Info button will display image information on the LCD monitor. Info (1131)button Info (1131)button X /nfo In Ptay mode, the play & pause/down button works as follows: - If the menu is displayed Press the DOWN button to move from the main menu to a sub menu, or to move down the sub menu cursor.
Left/Right/Menu / OK button LEFT / RIGHT / MENU / OK buttons activate the following. - LEFT button - RIGHT button - MENU button - OK button Printer _ : While the menu is showing, the LEFT button operates as a direction button. While the menu is not Delete _ _ ) button This deletes images stored on the memory card. 1. Select an image that you want to delete by pressing the Left / Right button and press the DELETE (/i_' ) button. showing, press the LEFT button to select the previous image.
button • Resize Change the resolution (size) of pictures taken. Select [Start image] to save an image to be the start-up image. - $760 o 1. Press the ptay mode button and press the E button. 2. Press the Left / Right button and select the [RESlZE] ( [] ) menu tab. 3. Select a desired sub menu by pressing the Up / Down button and press the OK button.
button • Rotating an image You can rotate the stored images by various degrees. button : Colour It is possible to add colour effects to your images by using this button. 1. Press the play mode button and press the E button. 2. Press the LEFT/RIGHT button and select 1. Press the play mode button and press the E button. 2. Select ( Q ) menu tab by pressing the Left / Right button. the [ROTATE] (_) menu tab. 3. Select a desired sub menu by pressing the UP / DOWN button. 3.
button • Colour [] Custom colour You can change the R (Red), G (Green) and B (Blue) values of the image.
Setting up the play back function usingthe LCD monitor PLAY mode functions can be changed by using the LCD monitor. in the PLAY mode, pressing the MENU button displays the menu on the LCD monitor. The menus you can set up in Ptay mode are as follows. To capture an image after setting up the play menu, press the PLAY mode button or shutter button. This menu is available while the camera is connected to a PictBridge supporting printer (direct connection to the camera, sold separately) with a USB cable.
Settinguptheplaybackfunction usingthe LCDmonitor Starting the Multi Slide Show _) Images can be displayed continuously at pre-set intervals. You can view the Multi Slide Show by connecting the camera to an external monitor. Auto Plain Type 1. Press the play mode button and press the menu button. 2. Press the LEFT / RIGHT button and select the [MULTI SLIDE SHOW] menu tab.
Starting the Multi Slide Show SelectincL/m& ec!es Confiqure Multi Slide Show effects You can select image to view Unique screen effects can be used for the Multi Slide Show. 1. Use the Up / Down buttons to select the [image] menu and press the Right button. 2. Select a desired sub menu by pressing the Up / Down button. jAil] :All images saved in the Memory are played back. [Date] : Images taken in a specified date are played back. [Select] : Play only the selected images.
Starting the Multi Slide Show _) Pla Settingj_lav interval Voice memo Set the Multi Slide Show play interval. You can add your voice to a stored still image. 1. Select the [Interval] sub menu by pressing the UP / DOWN button and press the RIGHT button. 2. Use the Up / Down buttons to select the desired interval. 3. Press the OK button to save the configuration. [Voice memo menu] o The loading time depends on the image size and quality.
Pla DeletinqjrnAcLes Protectin_cLes This deletes images stored on the memory. This is used to protect specific shots from being accidentally erased (Lock). It also unprotects images that have been previously protected (Unlock). 1. Press the Up / Down button and select the [Delete] menu tab. And then press the Right button. 2. Select a desired sub menu by pressing the UP / DOWN button and press the OK button. [Select] : Selection window for an image to delete is displayed.
l=,la DPOF [] DPOF(Digital Print Order Format) allows you to embed printing information on your memory card's MlSC folder. Select the pictures to be printed and how many prints to make. [] The DPOF indicator will display on the LCD monitor when an image that has DPOF information plays back. Images can then be printed on DPOF printers, or at an increasing number of photo tabs. [] This function is not available for Movie clips and Voice recording files.
l=,la [] Index [] Print size Images (except for movie clips and voice file) are printed as index type. You can specify the print size when printing images stored on the memory card. The [Size] menu is available only for DPOF 1.1 compatible printers. 1. Press the Up / Down button and select the [DPOF] menu tab. And then press the Right button. 2. Press the Right button again and [index] sub menu will display. 3. Select a desired sub menu by pressing the UP / DOWN button.
l=,la C..Q._v To Card This enables you to copy image files, movie clips and voice recording files to the memory card. 1. Select the [Copy To Card] menu tab by pressing the Up / Down button. And then press the Right button. 2. Select a desired sub menu by pressing the UP/DOWN button and press the OK button. - [No] : Cancels "Copy to Card". - [Yes] : All images, movie clips and voice recording files saved in the internal memory are copied to the memory card after the [Processing!] message is displayed.
PictBridge You can use the USB cable to connect this camera to a printer that supports PictBridge (sold separately) and print the stored images directly. Movie clips and voice files cannot be printed. If the [USB] menu is set to the [Computer], you cannot connect a Pictbridge compatible printer to the camera through USB cable with [Connecting Computer] message. In this case, remove the cable and do the step 1 and 2 again. [] Setting up the camera for connection to the printer 1.
PictBridge • Picture Selection PictBridge • Print Setting You can select images you want to print. You can select the Paper Size, Print Format, Paper Type, Print Quality, Date Print, and File Name Print menus for printed pictures. [] Setting the Number of Copies to Print 1. Press the Menu button and the PictBridge menu will display. 2. Use the Up / Down buttons to select the [Images] menu and press the Right button. 3. Use the Up / Down buttons to select a desired sub menu and press the OK button.
PictBridge • Reset Initialises user-changed configurations. 1. Use the Up / Down buttons to select the [Reset] menu tab. And then press the Right button. 2. Use the Up / Down buttons to select the desired sub menu value, and then press the OK button. If [No] is selected : Settings will not be reset. important notes Be sure to observe the following precautions! This unit contains precision electronic components. store this unit in the -Areas exposed to -Areas exposed to - Areas exposed to weather.
important notes - If you use this camera in wet places, such as beach or pool, do not let water or sand get inside the camera. Doing so may result in failure or may permanently damage the unit. • Extremes in temperature may cause problems. - If the camera is transferred from a cold to a warm and humid environment, condensation can form on the delicate electronic circuitry. If this occurs, turn the camera off and wait for at least 1 hour until all moisture is dispersed.
Warning indicator There are several warnings that may appear on the LCD display. [ Card Error?] • Memory card error • Memory card error -+ Contact a camera service centre. --e. Turn off the camera power and turn it on again --e. insert the memory card again -+ insert and format the memory card (p.46) [ Card Locked! ] oThe memory card is locked -+ SD/SDHC memory card : Slide the write protect switch to the top of the memory card [ Memory [ File Error! ] oFile error -e Delete the file.
Before contacting a service centre Please check the following The camera doesn't switch on oThere is low battery capacity -4, Insert fresh batteries. (p.12) • Battery is inserted incorrectly with the polarities reversed. -+ Insert the battery according to the polarity marks (+, -). The camera power ceases while in use oThe battery is exhausted -e Insert fresh batteries. oThe Camera is turned off automatically -+ Turn on the camera power again.
Before contacting a service centre The flash does not fire oFtash off mode has been selected -e. Dis-engage flash off mode oThe camera mode can't use the flash -+ Refer to the FLASH instruction (p.
Specifications Image Sensor - Type : 1/2.5" CCD Flash - Effective Pixel : $860 :Approx. 8.1 Mega-pixel $760 : Approx. 7.2 Mega-pixel Stow sync, Flash off - Range : Wide : 0.3m ~ 4.0m, Tele : 0.5m ~ 2.1m - Recharging Time : Approx. 5.5 sec - Total Pixet : $860 : Approx. 8.3 Mega-pixet $760 : Approx. 7.2 Mega-pixet Lens - Modes :Auto, Auto & Red-eye reduction, Fill-in flash, - Focal Length :SHD Lens f = 6.3 ~ 18.9mm (35ram film equivalent: 38 ~ 114mm) - F No. : F2.8(W) ~ F5.2(T) - Digital Zoom : .
Specifications - Movie Clip .With Audio (recording time : memory capacity dependent) •Size : 640x480, 320x240 •Frame rate : 30 fps, 15 fps •3X Optical Zoom and Mute in Zooming •Movie Editing (Embedded): Pause during recording, Still Image Capture Storage - Media •Internal memory : About 11MB flash memory •External Memory (Optional) : MMC card (Up to 1GB guaranteed) SD card (Up to 2GB guaranteed) SDHC card (Up to 4GB guaranteed) - File Format •Still Image : JPEG (DCF), EXIF 2.2, DPOF 1.1, PictBridge 1.
Specifications Power Source - Primary Battery: 2 X AAAIkaline - Rechargeable battery (Optional) : SNB-2512B KIT( 2xAA Ni-MH Battery & Charger ) Included battery may vary depending on sale region. Dimensions (WxHxD) - 93 X 62 X 26.5mm (excluding protrusions) Weight -Approx. Operating Temperature - 0 ~ 40°C 123g (without batteries and card) Operating Humidity - 5 ~ 85% Software - Samsung Master, Adobe Reader Specifications are subject to change without prior notice. •.
Software Notes Please ensure that you read the instruction manual carefully before use. - The attached software is a camera driver and image editing software toot for Windows. - Under no circumstances should all or part of either the software or the user manual be reproduced. - Copyrights for software are licensed only for use with a camera. - In the unlikely event of a manufacturing fault, we will repair or exchange your camera.
About the software After inserting the CD-ROM provided with this camera into the CD-ROM drive, the following window should automatically run. Before connecting the camera to the PC, you should first install the camera driver. [] Camera driver : This enables images to transfer between the camera and PC. This camera uses the USB Storage Driver as the camera driver. You can use the camera as a USB card reader.
Settin_lication software To use this camera with a PC, install the application software first. After this has been done, the stored images in the camera can be moved to the PC and can be edited by an image editing program. 2. Install the camera driver, DirectX, Samsung Master and Adobe Reader by selecting a button shown on the monitor. If a recent version of DirectX has been installed on your computer, DirectX may not be installed. • You can visit the Samsung web-site through the internet. http://www.
Settin_plication software 3. After restarting the computer, connect the PC to the camera with the USB cable. 4. Turn the camera power on. The [Found New Hardware Wizard] will open and the computer wilt recognise the camera, ......... s ................................. _:_ _, .... _ ........t F_ ,_,4 c If your OS is Windows XP/Vista, an image viewer program will open. If the download window of Samsung Master opens after starting Samsung Master, the camera driver was set up successfully.
Settin_lication software If you have installed the camera driver, the [Found New Hardware Wizard] may not open. On a Windows 98SE system, the Found New Hardware Wizard dialog box opens and a window asking you to select a driver file may appear, tn this case, specify "USB Ddver" in the CD supplied. PDF documents of user manual are included in the Software CDROM supplied with tNs camera. Search the PDF files with Windows explorer.
Starting PC mode [] Connecting the camera to a PC [] Downloading stored images You can download the still images stored on the camera to your PC's hard disk and print them or use a photo editing software to edit them. 1. Connect the camera to your PC with the USB cable. 2. On your computer's desktop display, select [My computer] and double click [Removable Disk -+ DClM-e. 100SSCAM]. The image files wilt then be displayed.
Starting PC mode 4. A pop-up menu will open. Click the [Cut] or [Copy] menu. - [Cut] : cuts a selected file. - [Copy] : copies files. 5. Click a folder where you want to paste the file. - By using [Samsung Master], you can see the stored images in the memory directly on the PC monitor and you can copy or move the image files. o view We recommend that you should copyfrom the the images to the PC them. Opening images directly removable disktomay be subject to unexpected disconnection.
Removing the removable disk [] Windows 98SE 1. Check whether the camera and PC are transferring a file. If the camera status lamp blinks, please wait until the lamp has finished blinking and is constantly on. 2. Unplug the USB cable. [] Windows 2000/ME/XP/Vista 5. A [Safe to Remove Hardware] window wilt open. Click the [OK] button. 6. A [Unplug or Eject Hardware] window will open. Click the [Close] button and the removable disk will be removed safely.
Setting up the USB Driver for MAC 1. A USB Driver for MAC is not included with the software CD as MAC OS supports the camera driver. 2. Check the MAC OS version during start-up. This camera is compatible with MAC OS 9.2 ~ 10.4. 3. Connect the camera to the Macintosh and turn the camera power on. 4. A new icon wilt be displayed on the desktop after connecting the camera to the MAC. Removing the USB Driver for Windows 98SE To remove the USB driver, refer to the process shown below. 1.
Sarnsung Master You can download, view, edit and save your images and movies with this software. This software is only compatible with Windows. To start the program, click [Start -+ Programs -+Samsung -+Samsung Master -+Samsung Master]. 4. Select a destination and make a folder to save downloaded images and folders. - Folder names can be made in order of date and images will be downloaded. - Folder name will be made as you want and images wilt be downloaded. [] Downloading images 1.
Sarnsung Master [] Image viewer : You can view the stored images. [] Image edit : You can edit the still image. @.... - Image viewer functions are listed below. 0; Menu bar : You can select menus. File, Edit, View, Tools, Change functions, Auto download, help, etc. {2, Image selection window : You can select the desired images in this window. {_ Media type selection menu : You can select image viewer, image edit and movie edit functions in this menu.
Sarnsung Master [] Movie edit : You can get the still image, movie clip, narration, music files together in a movie clip. Some movie clips that were compressed with a codec that is not compatible with the Samsung Master can't play back in the Samsung Master. Refer to the [Help] menu in Samsung Master for further information. _..=.® - Movie clip edit functions are listed below. i Edit menu : You can select the following menus. [Add Media] : You can add other media elements to a movie.
FAQ Pleasecheck the following ifthe USB connectionmalfunctions. USB cableisnotconnected or itisnotthe suppliedUSB .......... cable Connect the suppliedUSB cable. The camera is not recognised by your PC. Sometimes, the camera may appear under [Unknown Devices] in Device Manager. install the camera driver correctly. Turn off the camera, remove the USB cable, plug in the USB cable again, and then turn on the camera. There is an unexpected error during file transfer.
Correct Disposal of This Product FAQ [] When the DirectX 9.0 or later is not installed -+ Install the DirectX 9.0 or later 1) Insert the CD provided with the camera 2) Run the windows explorer and select the [CD-ROM drive:\ USB Driver\DirectX 9.0] folder and click the DXSETUP.exe file. The DirectX will be installed. Visit the following site for downloading the DirectX.http://www.microsoft.
Correct disposal of batteries in this product FCC notice (Applicable in the European Union and other European " countries orrect disposal of batteries in this product with separate battery return systems.) This marking on the battery, manual or packaging indicates that the batteries in this product should not be disposed of with other household waste at the end of their working life.
MEMO {92}
Inte net address - h_tp:/iwww,samsungcamera,com I Phase the warranty that came with the product youafterosabs purchased,service or inquires. or go torefer our to website http://www.samsungcamera.