User manual S22B360V S22B360VW The color and the appearance may differ depending on the product, and the specifications are subject to change without prior notice to improve the performance.
Table Of Contents BEFORE USING THE PRODUCT 7 Copyright 7 7 Icons used in this manual Symbols for safety precautions 8 Cleaning 8 9 9 Cleaning Securing the Installation Space Precautions for storage 10 Safety Precautions 10 11 13 Electricity and Safety Installation and Safety Operation and Safety 17 Correct posture to use the product 18 Checking the Contents 18 19 Removing the Packaging Checking the Components 20 Parts 20 22 Frontal Buttons Reverse Side 23 Installation 23 24 25 Att
Table Of Contents SCREEN SETUP CONFIGURING TINT 31 Connecting and Using a PC 31 33 34 35 36 Connecting to a PC Connecting to Headphones or Speakers Driver Installation Setting Optimum Resolution Changing the Resolution Using a PC 40 Brightness 40 Configuring Brightness 41 Contrast 41 Configuring Contrast 42 Sharpness 42 Configuring Sharpness 43 SAMSUNG MAGIC Bright 43 Configuring SAMSUNG MAGIC Bright 45 SAMSUNG MAGIC Angle 45 Configuring SAMSUNG MAGIC Angle 47 Coarse 47 Adjusti
Table Of Contents RESIZING OR RELOCATING THE SCREEN SETUP AND RESET 53 Blue 53 Configuring Blue 54 Color Tone 54 Configuring the Color Tone Settings 55 Gamma 55 Configuring Gamma 56 H-Position & V-Position 56 Configuring H-Position & V-Position 57 Image Size 57 Changing the Image Size 59 Menu H-Position & Menu V-Position 59 Configuring Menu H-Position & Menu VPosition 60 Reset 60 Initializing Settings (Reset) 61 Language 61 Configuring Language 62 Eco Saving 62 Configur
Table Of Contents 68 Customized Key 68 Configuring Customized Key 69 Auto Source 69 Configuring Auto Source 70 Display Time 70 Configuring Display Time 71 Menu Transparency 71 Changing Menu Transparency INFORMATION MENU AND OTHERS 72 INFORMATION 72 Displaying INFORMATION INSTALLING THE SOFTWARE 73 MagicTune 73 73 74 What is "MagicTune"? Installing the Software Removing the Software 75 MultiScreen 75 76 Installing the Software Removing the Software 77 Requirements Before Conta
Table Of Contents 94 Responsibility for the Pay Service (Cost to Customers) 94 94 94 Not a product defect A Product damage caused by customer's fault Others 96 Correct Disposal 96 Correct Disposal of This Product (Waste Electrical & Electronic Equipment) 97 Terminology INDEX Table Of Contents 6
Before Using the Product Copyright The contents of this manual are subject to change without notice to improve quality. 2012 Samsung Electronics Samsung Electronics owns the copyright for this manual. Use or reproduction of this manual in parts or entirety without the authorization of Samsung Electronics is prohibited. Microsoft, Windows and Windows NT are registered trademarks of Microsoft Corporation. VESA, DPM and DDC are registered trademarks of the Video Electronics Standards Association.
Before Using the Product Cleaning Cleaning Exercise care when cleaning as the panel and exterior of advanced LCDs are easily scratched. Take the following steps when cleaning. 1. Power off the monitor and computer. 2. Disconnect the power cable from the monitor. Hold the power cable by the plug and do not touch the cable with wet hands. Otherwise, an electric shock may result. 3. Wipe the monitor screen using a clean, soft and dry cloth.
Before Using the Product Securing the Installation Space z Ensure some space around the product for ventilation. An internal temperature rise may cause fire and damage the product. Be sure to allow the amount of space as shown below or greater when installing the product. The exterior may differ depending on the product. 10 cm 10 cm 10 cm 10 cm 10 cm Precautions for storage Be sure to contact Samsung Customer Service Center (page 88) if the inside of the monitor needs cleaning.
Before Using the Product Safety Precautions Electricity and Safety The following images are for reference only. Real-life situations may differ from what is shown in the images. Warning Do not use a damaged power cable or plug, or a loose power socket. z An electric shock or fire may result. Do not plug many products into the same power socket. z Otherwise, the socket may overheat and cause a fire. Do not touch the power cable with wet hands. z Otherwise, an electric shock may result.
Before Using the Product Caution Do not disconnect the power cable while the product is being used. z The product may become damaged by an electric shock. Do not use the power cable for products other than authorized products supplied by Samsung. z ! An electric shock or fire may result. Keep the power socket where the power cable is connected unobstructed. z If any problem occurs in the product, unplug the power cable to completely cut the power to the product.
Before Using the Product Do not install the product on an unstable or vibrating surface (insecure shelf, sloped surface, etc.). z The product may fall and break or cause a personal injury. z Using the product in an area with excess vibration may damage the product or cause a fire. Do not install the product in a vehicle or a place exposed to dust, moisture (water drips, etc.), oil, or smoke. z ! An electric shock or fire may result.
Before Using the Product Put down the product carefully. z The product may fall and break or cause a personal injury. ! SAMSUNG ! Installing the product in an unusual place (a place exposed to a lot of fine particles, chemical substances or extreme temperatures, or an airport or train station where the product should operate continuously for an extended period of time) may seriously affect its performance.
Before Using the Product During a lightning or thunderstorm, power off the product and remove the power cable. z ! An electric shock or fire may result. Do not drop objects on the product or apply impact. z An electric shock or fire may result. ! Do not move the product by pulling the power cord or any cable. z Otherwise, the cable may be damaged and product failure, an electric shock or fire may result. If a gas leakage is found, do not touch the product or power cable.
Before Using the Product Caution Leaving the screen fixed on a stationary image for an extended period of time may cause afterimage burn-in or defective pixels. z ! If you are not going to use the product for an extended period of time, activate power-saving mode or a moving-picture screen saver. -_! Disconnect the power cable from the power socket if you do not plan on using the product for an extended period of time (vacation, etc.).
Before Using the Product Do not hold the monitor upside-down or move it by holding the stand. z The product may fall and break or cause a personal injury. Do not use humidifiers or stoves around the product. z An electric shock or fire may result. Rest your eyes for more than 5 minutes for every 1 hour of product use. z Eye fatigue will be relieved. ! Do not touch the screen when the product has been turned on for an extended period of time as it will become hot.
Before Using the Product Correct posture to use the product Use the product in the correct posture as follows: z Straighten your back. z Allow a distance of 45 to 50cm between your eye and the screen, and look slightly downward at the screen. Keep your eyes directly in front of the screen. z Adjust the angle so light does not reflect on the screen. z Keep your forearms perpendicular to your upper arms and level with the back of your hands. z Keep your elbows at about a right angle.
1 1.1 Preparations Checking the Contents 1.1.1 Removing the Packaging 1 Open the packaging box. Be careful not to damage the product when you open the packaging with a sharp instrument. 2 Remove the styrofoam from the product. 3 Check the components and remove the styrofoam and plastic bag. This image is for reference only. 4 Store the box in a dry area so that it can be used when moving the product in the future.
1 Preparations 1.1.2 Checking the Components z Contact the dealer from whom you purchased the product if any item is missing. z The appearance of the components and items sold separately may differ from the image shown.
1 1.2 Preparations Parts 1.2.1 Frontal Buttons The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. Key Guide MHL SAMSUNG MAGIC ANGLE MHL AUTO SAMSUNG MAGIC ANGLE AUTO This is a touch-type button. Tap the button lightly with a finger. Icons Description z Open or close the onscreen display (OSD) menu, or return to the parent menu.
1 Preparations Icons Description Configure Customized Key and press [ be enabled. SAMSUNG MAGICAngle ]. The following options will SAMSUNG - MAGIC Bright - Eco Saving - Image Size To configure Customized Key, go to SETUP&RESET → Customized Key and select the mode you want. Confirm a menu selection. Pressing the [ ] button when the OSD menu is not displayed will change the input source (Analog/HDMI/MHL).
1 Preparations 1.2.2 Reverse Side The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. DC 14V DC 14V Port HDMI IN/MHL HDMI IN/MHL RGB IN AUDIO OUT RGB IN AUDIO OUT About ports Connect to the DC power adapter. HDMI IN / MHL Connect to a source device that has the MHL function using the MHL cable. Connect to a source device using an HDMI cable. Connect to a PC using the D-SUB cable.
Installation 1.3.1 Attaching the cradle Before assembling the product, place the product down on a flat and stable surface so that the screen is facing downwards. Place a soft cloth over the table to protect the product and place the product onto the cloth so that the front of the product is facing downwards. Hold the main body of the product with your hand as shown by the figure. Turn the connecting screw at the bottom of the stand fully so that it is completely fixed.
1 Preparations 1.3.2 Adjusting the Product Tilt The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. -1° (± 2°) ~ 20° (± 2°) z You can adjust the tilt of your monitor. z Hold the lower part of the product and adjust the tilt carefully.
1 Preparations 1.3.3 Anti-theft Lock An anti-theft lock allows you to use the product securely even in public places. The locking device shape and locking method depend on the manufacturer. Refer to the user guide provided with your anti-theft locking device for details. The lock device is sold separately. DC 14V HDMI IN/MHL RGB IN AUDIO OUT The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality.
2 2.1 Using "MHL(Mobile High-Definition Link)" MHL (Mobile High-Definition Link) This feature allows you to enjoy videos and photos (imported from a connected mobile device that supports MHL) on the screen of the product. MHL z To use the MHL function, you need an MHL-certified mobile device. You can check if your mobile device is MHL certified on the device manufacturer's website. To find a list of MHL-certified devices, visit the official MHL website (http://www.mhlconsortium.org).
2 Using "MHL(Mobile High-Definition Link)" 2.1.1 Using "MHL" 1 Connect the USB port on the mobile device to the [HDMI IN / MHL] port on the product using the MHL cable. HDMI IN / MHL DC 14V 2 HDMI IN/MHL RGB IN AUDIO OUT z When the MHL cable is used, [HDMI IN / MHL] is the only port on the product that supports the MHL function. z A mobile device should be purchased separately. Connect the DC power adapter to the product and a power socket. (For details, refer to "3.2 Connecting the Power".
2 Using "MHL(Mobile High-Definition Link)" When the mobile device is in power-saving mode When the mobile device is in sleep mode, the following message will appear in place of the MHL screen. To display the MHL screen, deactivate sleep mode. MHL device is in sleep mode. When the mobile device is not connected or does not support MHL z When the mobile device is not connected to the product or does not support the MHL function, the following message will appear.
2 Using "MHL(Mobile High-Definition Link)" 2.1.2 Disabling "MHL" Disabling MHL by using the [MHL] button When MHL is active, press the [MHL] button. The MHL function will be disabled. DSUB (or HDMI1) [MHL] MHL DSUB/HDMI1 The input source changes automatically only when a cable is connected to a port other than [HDMI IN / MHL].
3 3.1 Connecting and Using a Source Device Before Connecting DC 14V HDMI IN/MHL RGB IN AUDIO OUT 3.1.1 Pre-connection Checkpoints z Before connecting a source device, read the user manual provided with it. The number and locations of ports on source devices may differ from device to device. z Do not connect the power cable until all connections are completed. Connecting the power cable during connection may damage the product. z 3.
3 3.3 Connecting and Using a Source Device Connecting and Using a PC 3.3.1 Connecting to a PC Select a connection method suitable for your PC. Connecting parts may differ in different products. Connection Using the D-SUB Cable (Analogue Type) Do not connect the power cable before connecting all other cables. Ensure you connect a source device first before connecting the power cable.
3 Connecting and Using a Source Device 3 Press the [ ] button on the product to change the input source to HDMI/MHL. Connection Using an HDMI-DVI Cable Do not connect the power cable before connecting all other cables. Ensure you connect a source device first before connecting the power cable. HDMI IN / MHL DC 14V 1 HDMI IN/MHL RGB IN AUDIO OUT Connect the HDMI-DVI cable to the HDMI port on the back of the product and the DVI port on the PC.
3 Connecting and Using a Source Device 3.3.2 Connecting to Headphones or Speakers Do not connect the power cable before connecting all other cables. Ensure you connect a source device first before connecting the power cable. AUDIO OUT DC 14V 1 HDMI IN/MHL RGB IN AUDIO OUT Connect an audio output device such as headphones or speakers to [AUDIO OUT] on the product. This product won't make any sound when only the HDMI cable is connected without a speaker connected.
3 Connecting and Using a Source Device 3.3.3 Driver Installation 1 2 3 z You can set the optimum resolution and frequency for this product by installing the corresponding drivers. z An installation driver is contained on the CD supplied with the product. z If the file provided is faulty, visit the Samsung homepage (http://www.samsung.com) and download the file. Insert the user manual CD provided with the product into the CD-ROM drive. Click "Windows Driver".
3 Connecting and Using a Source Device 3.3.4 Setting Optimum Resolution An information message about setting optimum resolution will appear if you power on the product for the first time after purchase. Select a language on the product and change the resolution on your PC to the optimum setting. The optimal resolution for this monitor is as follows: **** x **** ** Hz Use the above settings to set the resolution on your PC.
3 Connecting and Using a Source Device 3.3.5 Changing the Resolution Using a PC z Adjust the resolution and refresh rate in Control Panel on your PC to obtain optimum picture quality. z The picture quality of TFT-LCDs may degrade if the optimum resolution is not selected. Changing the Resolution on Windows XP Go to Control Panel 1 Display Settings and change the resolution.
3 Connecting and Using a Source Device Changing the Resolution on Windows Vista Go to Control Panel Personalization Display Settings and change the resolution.
3 Connecting and Using a Source Device Changing the Resolution on Windows 7 Go to Control Panel Display Screen Resolution and change the resolution.
3 Connecting and Using a Source Device Changing the Resolution on Windows 8 Go to Settings Control Panel Display Screen Resolution and change the resolution.
4 4.1 Screen Setup Configure the screen settings such as brightness. Brightness You can adjust the general brightness of the picture. (Range: 0~100) A higher value will make the picture appear brighter. z SAMSUNG This menu is not available when MAGIC Bright is set to Dynamic Contrast mode. z Not available if Eco Saving is set to On. 4.1.1 Configuring Brightness 1 Press any button on the front of the product to display the Key Guide. Next, press [ 2 3 ] to display the corresponding menu screen.
4 4.2 Screen Setup Contrast Adjust the contrast between the objects and background. (Range: 0~100) A higher value will increase the contrast to make the object appear clearer. z SAMSUNG This menu is not available when MAGIC Bright is in Cinema or Dynamic Contrast mode. z SAMSUNG This menu is not available when MAGIC Color is in Full or Intelligent mode. 4.2.1 Configuring Contrast 1 Press any button on the front of the product to display the Key Guide.
4 4.3 Screen Setup Sharpness Make the outline of objects more clear or blurry. (Range: 0~100) A higher value will make the outline of objects clearer. z SAMSUNG This menu is not available when MAGIC Bright is in Cinema or Dynamic Contrast mode. z SAMSUNG This menu is not available when MAGIC Color is in Full or Intelligent mode. 4.3.1 Configuring Sharpness 1 Press any button on the front of the product to display the Key Guide. Next, press [ 2 3 ] to display the corresponding menu screen.
4 4.4 Screen Setup SAMSUNG MAGIC Bright This menu provides an optimum picture quality suitable for the environment where the product will be used. z Not available if Eco Saving is set to On. z SAMSUNG This menu is not available when MAGIC Angle is enabled. You can customize the brightness to suit your preferences. 4.4.1 Configuring SAMSUNG MAGIC Bright 1 Press any button on the front of the product to display the Key Guide. Next, press [ 2 3 ] to display the corresponding menu screen.
4 Screen Setup PICTURE Brightness Contrast Sharpness SAMSUNG MAGIC Bright Dynamic ࢽ࣏ ࡈی SAMSUNG MAGIC Angle Coarse ଥࢿ Movie Fine Standard Custom AUTO SAMSUNG When the external input is connected through HDMI and PC/AV Mode is set to AV, MAGIC Bright has four automatic picture settings (Dynamic, Standard, Movie and Custom) that are preset at the factory. You can activate either Dynamic, Standard, Movie or Custom.
4 4.5 Screen Setup SAMSUNG MAGIC Angle SAMSUNG MAGICAngle allows you to configure the settings to obtain the optimum picture quality according to your viewing angle. z SAMSUNG This menu is not available when MAGIC Bright is in Cinema or Dynamic Contrast mode. z SAMSUNG This menu is not available when MAGIC Color is enabled. You can customize the angle to suit your preferences. 4.5.1 Configuring SAMSUNG MAGIC Angle 1 Press any button on the front of the product to display the Key Guide.
4 Screen Setup 4 5 Press [ ] to move to the option you want and press [ ]. The selected option will be applied.
4 4.6 Screen Setup Coarse Adjust the screen frequency. This menu is available in Analog mode only. 4.6.1 Adjusting Coarse 1 Press any button on the front of the product to display the Key Guide. Next, press [ 2 3 ] to display the corresponding menu screen. Press [ ] to move to PICTURE and press [ Press [ ] to move to Coarse and press [ ] on the product. ] on the product. The following screen will appear.
4 4.7 Screen Setup Fine Fine-adjust the screen to obtain a vivid picture. This menu is available in Analog mode only. 4.7.1 Adjusting Fine 1 Press any button on the front of the product to display the Key Guide. Next, press [ 2 3 ] to display the corresponding menu screen. Press [ ] to move to PICTURE and press [ Press [ ] to move to Fine and press [ ] on the product. ] on the product. The following screen will appear.
4 4.8 Screen Setup HDMI Black Level If a DVD player or set-top box is connected to the product via HDMI, image quality degradation (contrast/ color degradation, black level, etc.) may occur, depending on the connected source device. In such case, HDMI Black Level can be used to adjust the image quality. If this is the case, correct the degraded picture quality using HDMI Black Level. 4.8.1 Configuring the HDMI Black Level Settings 1 Press any button on the front of the product to display the Key Guide.
5 Configuring Tint SAMSUNG Adjust the tint of the screen. This menu is not available when MAGIC Bright is set to Cinema or Dynamic Contrast mode. 5.1 SAMSUNG MAGIC Color SAMSUNG MAGICColor is a new picture-quality improvement technology developed independently by Samsung, which delivers vivid natural colors without picture quality degradation. SAMSUNG This menu is not available when MAGIC Angle is enabled. 5.1.
5 5.2 Configuring Tint Red Adjust the value of the color red in the picture. (Range: 0~100) A higher value will increase the intensity of the color. SAMSUNG This menu is not available when MAGIC Color is in Full or Intelligent mode. 5.2.1 Configuring Red 1 Press any button on the front of the product to display the Key Guide. Next, press [ 2 3 ] to display the corresponding menu screen. Press [ ] to move to COLOR and press [ Press [ ] to move to Red and press [ ] on the product.
5 5.3 Configuring Tint Green Adjust the value of the color green in the picture. (Range: 0~100) A higher value will increase the intensity of the color. SAMSUNG This menu is not available when MAGIC Color is in Full or Intelligent mode. 5.3.1 Configuring Green 1 Press any button on the front of the product to display the Key Guide. Next, press [ 2 3 ] to display the corresponding menu screen. Press [ ] to move to COLOR and press [ Press [ ] to move to Green and press [ ] on the product.
5 5.4 Configuring Tint Blue Adjust the value of the color blue in the picture. (Range: 0~100) A higher value will increase the intensity of the color. SAMSUNG This menu is not available when MAGIC Color is in Full or Intelligent mode. 5.4.1 Configuring Blue 1 Press any button on the front of the product to display the Key Guide. Next, press [ 2 3 ] to display the corresponding menu screen. Press [ ] to move to COLOR and press [ Press [ ] to move to Blue and press [ ] on the product.
5 5.5 Configuring Tint Color Tone Adjust the general color tone of the picture. z SAMSUNG This menu is not available when MAGIC Color is in Full or Intelligent mode. z SAMSUNG This menu is not available when MAGIC Angle is enabled. 5.5.1 Configuring the Color Tone Settings 1 Press any button on the front of the product to display the Key Guide. Next, press [ 2 3 ] to display the corresponding menu screen. Press [ ] to move to COLOR and press [ ] on the product.
5 5.6 Configuring Tint Gamma Adjust the mid-range brightness (Gamma) of the picture. SAMSUNG This menu is not available when MAGIC Angle is enabled. 5.6.1 Configuring Gamma 1 Press any button on the front of the product to display the Key Guide. Next, press [ 2 3 ] to display the corresponding menu screen. Press [ ] to move to COLOR and press [ ] on the product. Press [ ] to move to Gamma and press [ ] on the product. The following screen will appear.
6 6.1 Resizing or Relocating the Screen H-Position & V-Position H-Position: Move the screen to the left or right. V-Position: Move the screen up or down. z Available only when Image Size is set to Screen Fit. z This menu is available in Analog mode only. z When a 720P or 1080P signal is input in AV mode, select Screen Fit to adjust horizontal position in 0-6 levels. (The S22B360VW model does not support 1080p.) 6.1.
6 6.2 Resizing or Relocating the Screen Image Size Change the picture size. 6.2.1 Changing the Image Size 1 Press any button on the front of the product to display the Key Guide. Next, press [ 2 3 ] to display the corresponding menu screen. Press [ ] to move to SIZE&POSITION and press [ Press [ ] to move to Image Size and press [ ] on the product. ] on the product. The following screen will appear.
6 Resizing or Relocating the Screen SIZE&POSITION H-Position V-Position Image Size Ѱ :LGH 6FUHHQ )LW Menu H-Position Menu V-Position AUTO z 4:3: Display the picture with an aspect ratio of 4:3. Suitable for videos and standard broadcasts. z Wide: Display the picture in full screen regardless of the aspect ratio of the input source. z Screen Fit: Display the picture with the original aspect ratio without cutting off.
6 6.3 Resizing or Relocating the Screen Menu H-Position & Menu V-Position Menu H-Position: Move the menu position to the left or right. Menu V-Position: Move the menu position up or down. 6.3.1 Configuring Menu H-Position & Menu V-Position 1 Press any button on the front of the product to display the Key Guide. Next, press [ 2 3 ] to display the corresponding menu screen. Press [ ] to move to SIZE&POSITION and press [ ] on the product.
7 7.1 Setup and Reset Reset Return all the settings for the product to the default factory settings. 7.1.1 Initializing Settings (Reset) 1 Press any button on the front of the product to display the Key Guide. Next, press [ 2 3 ] to display the corresponding menu screen. Press [ ] to move to SETUP&RESET and press [ Press [ ] to move to Reset and press [ ] on the product. ] on the product. The following screen will appear.
7 7.2 Setup and Reset Language Set the menu language. z A change to the language setting will only be applied to the onscreen menu display. z It will not be applied to other functions on your PC. 7.2.1 Configuring Language 1 Press any button on the front of the product to display the Key Guide. Next, press [ 2 3 ] to display the corresponding menu screen. Press [ ] to move to SETUP&RESET and press [ Press [ ] to move to Language and press [ ] on the product. ] on the product.
7 7.3 Setup and Reset Eco Saving The Eco Saving function reduces power consumption by controlling the electric current used by the monitor panel. SAMSUNG This menu is not available when MAGIC Bright is in Dynamic Contrast mode. 7.3.1 Configuring Eco Saving 1 Press any button on the front of the product to display the Key Guide. Next, press [ 2 3 ] to display the corresponding menu screen. Press [ ] to move to SETUP&RESET and press [ Press [ ] to move to Eco Saving and press [ ] on the product.
7 7.4 Setup and Reset Off Timer On/Off You can set the product to automatically turn off. 7.4.1 Configuring Off Timer On/Off 1 Press any button on the front of the product to display the Key Guide. Next, press [ 2 3 ] to display the corresponding menu screen. Press [ ] to move to SETUP&RESET and press [ Press [ ] to move to Off Timer On/Off and press [ ] on the product. ] on the product. The following screen will appear.
7 7.5 Setup and Reset Off Timer Setting The off timer can be set within a range of 1 to 23 hours. The product will automatically power off after the specified number of hours. This menu is available only when Off Timer On/Off is set to On. 7.5.1 Configuring Off Timer Setting 1 Press any button on the front of the product to display the Key Guide. Next, press [ 2 3 ] to display the corresponding menu screen.
7 7.6 Setup and Reset PC/AV Mode Set PC/AV Mode to AV. The picture size will be enlarged. This option is useful when you view a movie. z This function does not support Analog mode. z Supplied for the wide models only such as 16:9 or 16:10. z If the monitor (when set to HDMI) is in power saving mode or is displaying the message Check Signal Cable, press the MENU button to display the On Screen Display (OSD). You can select PC or AV. 7.6.
7 7.7 Setup and Reset Volume When connected to an audio output device, such as headset, press [ ] to adjust the volume. Available only in HDMI mode. 7.7.1 Configuring Volume 1 Press any button on the front of the product to display the Key Guide. Next, press [ 2 3 ] to display the corresponding menu screen. Press [ ] to move to SETUP&RESET and press [ Press [ ] to move to Volume and press [ ] on the product. ] on the product. The following screen will appear.
7 7.8 Setup and Reset Key Repeat Time Control the response rate of a button when the button is pressed. 7.8.1 Configuring Key Repeat Time 1 Press any button on the front of the product to display the Key Guide. Next, press [ 2 3 ] to display the corresponding menu screen. Press [ ] to move to SETUP&RESET and press [ Press [ ] to move to Key Repeat Time and press [ ] on the product. ] on the product. The following screen will appear.
7 7.9 Setup and Reset Customized Key You can customize Customized Key as follows. 7.9.1 Configuring Customized Key 1 Press any button on the front of the product to display the Key Guide. Next, press [ 2 3 ] to display the corresponding menu screen. Press [ ] to move to SETUP&RESET and press [ Press [ ] to move to Customized Key and press [ ] on the product. ] on the product. The following screen will appear. SETUP&RESET .H\ 5HSHDW 7LPH : $FFHOHUDWLRQ &XVWRPL]HG .
7 Setup and Reset 7.10 Auto Source You can activate Auto Source. 7.10.1 Configuring Auto Source 1 Press any button on the front of the product to display the Key Guide. Next, press [ 2 3 ] to display the corresponding menu screen. Press [ ] to move to SETUP&RESET and press [ Press [ ] to move to Auto Source and press [ ] on the product. ] on the product. The following screen will appear. SETUP&RESET .H\ 5HSHDW 7LPH : $FFHOHUDWLRQ &XVWRPL]HG .
7 Setup and Reset 7.11 Display Time Set the on-screen display (OSD) menu to automatically disappear if the menu is not used for a specified period of time. Display Time can be used to specify the time after which you want the OSD menu to disappear. 7.11.1 Configuring Display Time 1 Press any button on the front of the product to display the Key Guide. Next, press [ 2 3 ] to display the corresponding menu screen.
7 Setup and Reset 7.12 Menu Transparency Set the transparency for the menu windows: 7.12.1 Changing Menu Transparency 1 Press any button on the front of the product to display the Key Guide. Next, press [ 2 3 ] to display the corresponding menu screen. Press [ ] to move to SETUP&RESET and press [ Press [ ] to move to Menu Transparency and press [ ] on the product. ] on the product. The following screen will appear.
8 8.1 INFORMATION Menu and Others INFORMATION View the current input source, frequency and resolution. 8.1.1 Displaying INFORMATION 1 Press any button on the front of the product to display the Key Guide. Next, press [ ] to display the corresponding menu screen. 2 Press [ ] to move to INFORMATION. The current input source, frequency and resolution will appear.
9 9.1 Installing the Software MagicTune 9.1.1 What is "MagicTune"? "MagicTune" is a software program that helps with monitor adjustments by providing comprehensive descriptions of monitor functions and easy-to-understand guidelines. You can adjust the product with the mouse and the keyboard without using the operating buttons of the product. 9.1.2 Installing the Software 1 2 Insert the installation CD into the CD-ROM drive. Select the "MagicTune" setup program.
9 Installing the Software 9.1.3 Removing the Software You can only remove "MagicTune™" through [Add or Remove Programs] in Windows. To remove "MagicTune™", complete the following steps. 1 Click [Start] select [Settings], and select [Control Panel] from the menu. For Windows XP, click [Start], and select [Control Panel] from the menu. 2 3 4 5 6 Double-click the [Add or Remove Programs] icon in the Control Panel. In the [Add/Remove] window, find and select "MagicTune™" so that it is highlighted.
9 9.2 Installing the Software MultiScreen MultiScreen MultiScreen enables users to use the monitor by partitioning multiple sections. 9.2.1 Installing the Software 1 2 Insert the installation CD into the CD-ROM drive. Select the "MultiScreen" setup program. If the pop-up screen for the software installation does not appear on the main screen, find and double-click the "MultiScreen" setup file on the CD-ROM. 3 4 When the Installation Wizard appears, click [Next].
9 Installing the Software Hardware z At least 32MB of memory z At least 60MB of free space on the hard disk drive 9.2.2 Removing the Software Click [Start], select [Settings]/[Control Panel], and then double-click [Add or Remove Programs]. Select "MultiScreen" from the program list and click the [Add/Delete] button.
10 Troubleshooting Guide 10.1 Requirements Before Contacting Samsung Customer Service Center 10.1.1 Testing the Product Before calling Samsung Customer Service Center, test your product as follows. If the problem persists, contact Samsung Customer Service Center. Check if your product is operating normally by using the product test function. If the screen is turned off and the power indicator blinks even though the product is properly connected to a PC, perform a self-diagnosis test.
10 Troubleshooting Guide Screen issue Not Optimum Mode is displayed. This message appears when the signal from the graphics card exceeds the maximum resolution or frequency for the product. Change the maximum resolution and frequency to suit the product performance, referring to Standard Signal Mode Table (page 85). The images on the screen look distorted. Check the cable connection to the product (Refer to "3.3 Connecting and Using a PC") The screen is not clear. The screen is blurry.
10 Troubleshooting Guide Sound issue The volume is too low. Adjust the volume. If the volume is still low after turning it up to the maximum level, adjust the volume on your PC sound card or software program. Source device issue A beeping sound is heard when my PC is booting. If a beeping sound is heard when your PC is booting, have your PC serviced.
10 Troubleshooting Guide 10.2 Q & A Question How can I change the frequency? Answer Set the frequency on your graphics card. z Windows XP: Go to Control Panel Appearance and Themes Advanced Display Settings Monitor, and adjust Refresh rate under Monitor settings. z Windows ME/2000: Go to Control Panel Settings Advanced Display Monitor, and adjust Refresh rate under Monitor settings.
10 Troubleshooting Guide Question How can I change the resolution? Answer z Windows XP: Go to Control Panel Appearance and Themes Display Settings, and adjust the resolution. z Windows ME/2000: Go to Control Panel Display Settings, and adjust the resolution. z Windows Vista: Go to Control Panel Appearance and Personalization Personalize Display Settings, and adjust the resolution.
11 Specifications 11.1 General Model Name Panel Synchronization S22B360VW Size 21.5 Inches (54 cm) 22 Inches (55 cm) Display area 476.64 mm (H) x 268.11 mm (V) 473.76 mm (H) x 296.1 mm (V) Horizontal Frequency 30 – 81 kHz Vertical Frequency 56 – 75 Hz Display Color Resolution S22B360V 16.
11 Specifications Model Name S22B360V S22B360VW Plug-and-Play This monitor can be installed and used with any Plug-and-Play compatible systems. Two-way data exchange between the monitor and PC system optimizes the monitor settings. Monitor installation takes place automatically. However, you can customize the installation settings if desired.
11 Specifications 11.2 PowerSaver The power-saving function of this product reduces power consumption by switching off the screen and changing the color of the power LED if the product is not used for a specified period of time. The power is not turned off in power-saving mode. To switch the screen back on, press any key on the keyboard or move the mouse. Power-saving mode functions only when the product is connected to a PC that has a power-saving function.
11 Specifications 11.3 Standard Signal Mode Table z This product can be set to only one resolution for each screen size to obtain the optimum picture quality due to the nature of the panel. Therefore, a resolution other than the specified resolution may degrade the picture quality. To avoid this, it is recommended that you select the optimum resolution specified for the screen size of your product. z Check the frequency when you exchange a CDT monitor (connected to a PC) for an LCD monitor.
11 Specifications Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock (MHz) Sync Polarity (H/V) MAC, 1152 x 870 79.976 75.025 135.000 +/+ VESA, 640 x 480 55.935 59.887 106.500 -/+ VESA, 640 x 480 60.000 60.000 108.000 +/+ VESA, 640 x 480 65.290 59.954 146.250 -/+ VESA, 800 x 600 67.500 60.000 148.500 +/+ Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock (MHz) Sync Polarity (H/V) 720 x 480, 480p 31.470 59.940 27.
11 Specifications Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock (MHz) Sync Polarity (H/V) VESA, 1024 x 768 48.363 60.004 65.000 -/- VESA, 1024 x 768 56.476 70.069 75.000 -/- VESA, 1024 x 768 60.023 75.029 78.750 +/+ VESA, 1152 x 864 67.500 75.000 108.000 +/+ VESA, 1280 x 720 45.000 60.000 74.250 +/+ VESA, 1280 x 800 49.702 59.810 83.500 -/+ VESA, 1280 x 1024 63.981 60.020 108.000 +/+ VESA, 1280 x 1024 79.976 75.025 135.
Appendix Contact SAMSUNG WORLD WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. NORTH AMERICA U.S.A 1-800-SAMSUNG (726-7864) http://www.samsung.com CANADA 1-800-SAMSUNG (726-7864) http://www.samsung.com/ca (English) http://www.samsung.com/ca_fr (French) MEXICO 01-800-SAMSUNG (726-7864) http://www.samsung.com LATIN AMERICA ARGENTINE 0800-333-3733 http://www.samsung.com BOLIVIA 800-10-7260 http://www.samsung.
Appendix LATIN AMERICA GUATEMALA 1-800-299-0013 http://www.samsung.com/latin (Spanish) http://www.samsung.com/latin_en (English) HONDURAS 800-27919267 http://www.samsung.com/latin (Spanish) http://www.samsung.com/latin_en (English) JAMAICA 1-800-234-7267 http://www.samsung.com NICARAGUA 00-1800-5077267 http://www.samsung.com/latin (Spanish) http://www.samsung.com/latin_en (English) PANAMA 800-7267 http://www.samsung.com/latin (Spanish) http://www.samsung.
Appendix EUROPE CZECH 800 - SAMSUNG (800-726786) http://www.samsung.com Samsung Electronics Czech and Slovak, s.r.o., Oasis Florenc, Sokolovská 394/17, 180 00, Praha 8 DENMARK 70 70 19 70 http://www.samsung.com EIRE 0818 717100 http://www.samsung.com ESTONIA 800-7267 http://www.samsung.com FINLAND 09 85635050 http://www.samsung.com FRANCE 01 48 63 00 00 http://www.samsung.com GERMANY 0180 5 SAMSUNG bzw. http://www.samsung.com 0180 5 7267864* (*0,14 €/Min. aus dem dt.
Appendix EUROPE SWITZERLAND 0848-SAMSUNG (7267864, CHF 0.08/min) http://www.samsung.com/ch (German) http://www.samsung.com/ch_fr (French) U.K 0330 SAMSUNG (7267864) http://www.samsung.com CIS ARMENIA 0-800-05-555 http://www.samsung.com AZERBAIJAN 088-55-55-555 http://www.samsung.com BELARUS 810-800-500-55-500 http://www.samsung.com GEORGIA 0-800-555-555 http://www.samsung.com KAZAKHSTAN 8-10-800-500-55-500 (GSM: 7799) http://www.samsung.com KYRGYZSTAN 00-800-500-55-500 http://www.
Appendix ASIA PACIFIC INDONESIA 0800-112-8888 021-5699-7777 http://www.samsung.com JAPAN 0120-327-527 http://www.samsung.com MALAYSIA 1800-88-9999 http://www.samsung.com NEW ZEALAND 0800 SAMSUNG (0800 726 786) http://www.samsung.com PHILIPPINES 1-800-10-SAMSUNG (726-7864) for PLDT http://www.samsung.com 1-800-3-SAMSUNG (726-7864) for Digitel 1-800-8-SAMSUNG (726-7864) for Globe 02-5805777 SINGAPORE 1800-SAMSUNG (726-7864) http://www.samsung.com TAIWAN 0800-329-999 http://www.samsung.
Appendix MIDDlE EAST OMAN 800-SAMSUNG (726-7864) http://www.samsung.com/ae (English) http://www.samsung.com/ae_ar (Arabic) SAUDI ARABIA 9200-21230 http://www.samsung.com/ae (English) http://www.samsung.com/ae_ar (Arabic) TURKEY 444 77 11 http://www.samsung.com U.A.E 800-SAMSUNG (726-7864) http://www.samsung.com AFRICA ANGOLA 91-726-7864 http://www.samsung.com BOTSWANA 0800-726-000 http://www.samsung.com CAMEROON 7095- 0077 http://www.samsung.com COTE D’ IVOIRE 8000 0077 http://www.
Appendix Responsibility for the Pay Service (Cost to Customers) When the service is requested, in spite of in warranty, we may charge you for a visit from a service technician in the following cases. Not a product defect Cleaning of the product, Adjustment, Explanation, Re-installation and etc. z If a service technician gives instructions on how to use product or simply adjusts options without disassembling product. z If a defect is caused by external environmental factors.
Appendix If customer requests a service in case the product has no defect, service fee may be charged. So please read User Manual first.
Appendix Correct Disposal Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in countries with separate collection systems) This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with other household waste at the end of their working life.
Appendix Terminology OSD (On Screen Display) On screen display (OSD) allows you to customize on-screen settings to optimize the picture quality as required. You can change the screen brightness, tint, size and many other settings using menus displayed on the screen. Gamma The Gamma menu adjusts the grey scale that represents middle tones on the screen. Adjusting the brightness brightens the whole screen, but adjusting Gamma only brightens the medium brightness.
Appendix Resolution Resolution is the number of horizontal pixels and vertical pixels that form a screen. It represents the level of display detail. A higher resolution displays a greater amount of information on the screen and is suitable for performing multiple tasks at the same time. E.g. A resolution of 1920 x 1080 consists of 1,920 horizontal pixels (horizontal resolution) and 1,080 vertical lines (vertical resolution).
Index A H Auto Source 69 HDMI Black Level 49 B I Before Connecting 30 Image Size 57 Blue 53 INFORMATION 72 Brightness 40 Installation 23 C K Checking the Contents 18 Key Repeat Time 67 Cleaning 8 Coarse 47 Color Tone 54 L Language 61 Connecting and Using a PC 31 Contact SAMSUNG WORLD WIDE 88 Contrast 41 Copyright 7 Correct Disposal 96 Correct posture to use the product 17 M Menu Transparency 71 MHL(Mobile High-Definition Link) 26 MultiScreen 75 Customized Key 68 O D Display Time 70 E
Index S Safety Precautions 10 SAMSUNG MAGIC Angle 45 SAMSUNG MAGIC Bright 43 SAMSUNG MAGIC Color 50 Sharpness 42 Standard Signal Mode Table 85 T Terminology 97 U Using "MHL" 27 Index 100
