User guide

80 2F. Calendar & Tools
䡲 Timer: Acts as a countdown timer. Counts down
time to an based on a preset time length (hours,
minutes, and seconds).
2. Tap (Create alarm).
3. Adjust the hour and minute using the up/down
arrows and then adjust the AM or PM value. When
complete, tap
Set.
4. Tap the Alarm repeat field to select a repeating
status for the alarm.
5. Tap the day(s) to repeat this alarm, or tap Repeat
weekly to check all boxes.
6. Tap Alarm type to select Melody, Vibration, Vibration
and melody, or Briefing.
7. Slide the alarm volume slider left or right to
decrease or increase the alarm volume.
8. Tap Alarm tone to select a ringtone that plays with
the alarm.
9. Tap the Snooze ON/OFF slider to activate
the Snooze feature.
10. Tap Snooze and set a duration (3, 5, 10, 15, or 
30 minutes) and tap a number of times for Snooze
to repeat (
1, 2, 3, 5, or 10 times).
11 . Tap the Smart alarm ON/OFF slider to
activate the Smart alarm feature.
Smart alarm tracks body movement and calculates
the best time to sound the alarm. Place the phone
on the bed, and then the phone’s movement
sensor (accelerometer) detects the movements
that set off the alarm.
12. Tap Smart alarm and set the duration and tone.
13. Enter a name for this alarm event.
14 . Tap Save to store the new alarm event.
Note: The number of hours and minutes left before the alarm
goes off briefly displays onscreen after setting the new
alarm time.
Note: If you set the smart alarm, the sound starts quiets a few
minutes early and slowly increases the volume.