User Manual

English 29
Maintenance
A
24. Use a at-head screwdriver to remove
the middle-hinge screw cap (A), and
then reinsert it on the opposite side.
A
B
25. Use the at-head screwdriver to remove
the ange-screw cap (A) to reveal
the ange screw (B). Use a Phillips
screwdriver to remove the ange screw
(B), and then tighten it on the opposite
side. Finally, close the ange-screw cap
(A) on the opposite side.
A
26. Flip the middle hinge (A) 180 degrees
as shown.
A
27. Fasten the middle hinge (A) on the
opposite side.
NOTE
When you reverse the door to open from
the right, you must attach the middle hinge
prior to the bottom hinge.
Untitled-2 29 2021-07-13  6:31:47