User Manual

Table Of Contents
Installation
English20
Installation
STEP 3 Door removal for entrance
If the refrigerator cannot pass through the entrance due to its size, follow these
instructions:
Tools required (not provided)
These tools are used for removing the doors.
Phillips screwdriver
WARNING
Unplug the power cord of the refrigerator before removing the doors.
Detach the doors
CAUTION
The door may fall off or over and damage itself during any of these steps. To prevent
an accident, use extreme caution when performing these steps.
Do not remove both doors simultaneously. Make sure to remove one door at a time.
Otherwise, any of the doors may fall and cause physical injury.
1. With the doors closed, use a Phillips
screwdriver to remove the screws
(x5) from the hinge cover. Pull up
and remove the hinge cover with the
connectors.
Untitled-2 20 2022-11-29  10:50:52