LFD DISPLAY User Manual ED65D ED75D The color and the appearance may differ depending on the product, and the specifications are subject to change without prior notice to improve the performance.
Table of contents Before Using the Product Copyright 5 Safety Precautions Symbols Cleaning Storage Electricity and Safety Installation Operation 6 6 6 7 7 8 10 Installing the Wall Mount Kit Wall Mount Kit Specifications (VESA) 24 25 Remote Control (RS232C) Cable Connection Connection Control Codes 26 26 27 28 Checking the Components Components 13 13 Parts Panel Key Reverse Side External sensor KIT Assembling the Holder-Wire stand Anti-theft Lock Remote Control 15 15 16 17 19 19 20 Before Install
Table of contents Dynamic Contrast Black Tone Flesh Tone RGB Only Mode Color Space White Balance Gamma Motion Lighting 54 54 54 54 55 55 55 55 Applications Picture Options Color Tone Color Temp.
Table of contents Reset All 86 Support Software Update By USB 87 87 Contact Samsung 87 Troubleshooting Guide Requirements Before Contacting Samsung Customer Service Center Testing the Product Checking the Resolution and Frequency Check the followings.
Chapter 01 Before Using the Product Copyright The contents of this manual are subject to change without notice to improve quality. © 2014 Samsung Electronics Samsung Electronics owns the copyright for this manual. Use or reproduction of this manual in parts or entirety without the authorization of Samsung Electronics is prohibited. Microsoft, Windows are registered trademarks of Microsoft Corporation. VESA, DPM and DDC are registered trademarks of the Video Electronics Standards Association.
Safety Precautions Cleaning ――Exercise care when cleaning as the panel and exterior of advanced LCDs are easily scratched. Caution ――Take the following steps when cleaning. ――The following images are for reference only. Real-life situations may differ from what is shown in the images. RISK OF ELECTRIC SHOCK DO NOT OPEN Caution : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER. (OR BACK) THERE ARE NO USER SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO QUALIFIED PERSONNEL.
Storage Connect the power plug to a grounded power socket (type 1 insulated devices only). High-glossy models can develop white stains on the surface if an ultrasonic wave humidifier is used nearby. ――Contact Customer Service Center if the inside of the product needs cleaning (service fee will be •• An electric shock or injury may result. ! Do not bend or pull the power cord with force. Be careful not to leave the power cord under a heavy object. charged).
Installation Caution Do not disconnect the power cord while the product is being used. •• The product may become damaged by an electric shock. Warning DO NOT PLACE CANDLES, INSECT REPELLANTS OR CIGARETTES ON TOP OF THE PRODUCT. DO NOT INSTALL THE PRODUCT NEAR HEAT SOURCES. •• A fire may result. Only use the power cord provided with your product by Samsung. Do not use the power cord with other products. •• A fire or electric shock may result. Have a technician install the wall-mount hanger.
Do not install the product on an unstable or vibrating surface (insecure shelf, sloped surface, etc.) Caution •• The product may fall and become damaged and/or cause an injury. Do not drop the product while moving. •• Using the product in an area with excess vibration may damage the product or cause a fire. Do not install the product in a vehicle or a place exposed to dust, moisture (water drips, etc.), oil, or smoke. •• Product failure or personal injury may result.
Operation Do not leave heavy objects or items that children like (toys, sweets, etc.) on top of the product. •• The product or heavy objects may fall as children try to reach for the toys or sweets resulting in a serious injury. Warning There is a high voltage inside the product. Never disassemble, repair or modify the product yourself. During a lightning or thunderstorm, power off the product and remove the power cable. •• A fire or electric shock may result. •• A fire or electric shock may result.
Do not use or keep combustible spray or an inflammable substance near the product. Caution •• An explosion or fire may result. Leaving the screen fixed on a stationary image for an extended period of time may cause afterimage burn-in or defective pixels. ! Ensure the vents are not blocked by tablecloths or curtains. •• Activate power-saving mode or a moving-picture screen saver if you will not be using the product for an extended period of time.
Rest your eyes for more than 5 minutes for every 1 hour of product use. Be careful that children do not place the battery in their mouths when removed from the remote control. Place the battery in a location that children or infants cannot reach. •• Eye fatigue will be relieved. •• If children have had the battery in their mouths, consult your doctor immediately. ! Do not touch the screen when the product has been turned on for an extended period of time as it will become hot.
Chapter 02 Preparations Checking the Components -- Contact the vendor where you purchased the product if any components are missing. Components -- The appearance of the components and items sold separately may differ from the image shown. -- A stand is not provided with the product. To install a stand, you can purchase one separately. Quick setup guide Warranty card D-SUB cable (P.
Items sold separately Wall-mount Kit HDMI cable (P.39) HDMI-DVI cable (P.38) PIM RS232C-Stereo cable RS232C(OUT) adapter Component cable (P.40) DVI cable (P.
Parts Panel Key Power on the product. If you press the [ ] button when the product is turned on, the control menu will be displayed. To exit the OSD menu, press and hold the panel key for at least one second. Move to the upper or lower menu. You can also adjust the value of an option. DVI IN RGB / DVI / HDMI / AV / COMPONENT AUDIO IN Move to the left or right menu. You can adjust the volume by moving the panel key left or right when the control menu is not displayed.
Port Reverse Side HDMI IN Connects to a source device using an HDMI cable. SERVICE (5V 0.5A) This port is used to upgrade the software. EXTERNAL IR / AMBIENT SENSOR IN Supplies power to the External ambient sensor board or receives the light sensor signal. External ambient sensor: Sold separately DVI IN RGB / DVI / HDMI / AV / COMPONENT AUDIO IN DVI IN PIM RGB / DVI / HDMI / AV / COMPONENT AUDIO IN Description RGB IN Connects to a source device using a D-SUB cable.
Buttons External sensor KIT Description ――The External sensor KIT has a remote-control sensor, a brightness sensor and Aim the remote control towards this spot on the LCD Display. ――Keep the area between the remote sensor and remote control obstacle-free. function keys. If mounting the display onto a wall, you can move the External sensor KIT to the side of the display. ――The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality.
Attaching the External sensor KIT to the side ――This External sensor KIT can be attached to any part of the display using the double-sided tape provided with the sensor. ――The External sensor KIT can also be attached to a wall near the display. ――Do not attach the External sensor KIT to the display if the display does not have plastic or metal sides. The display can be damaged.
Assembling the Holder-Wire stand Anti-theft Lock ――An anti-theft lock allows you to use the product securely even in public places. ――The locking device shape and locking method depend on the manufacturer. Refer to the user guide provided with your anti-theft locking device for details. To lock an anti-theft locking device: ――Stand: Sold separately 1 Fix the cable of your anti-theft locking device to a heavy object such as a desk. 2 Put one end of the cable through the loop on the other end.
Remote Control ――Using other display devices in the same space as the remote control of this product can cause the other display devices to be inadvertently controlled. ――A button without a description in the image below is not supported on the product. OFF Power on the product. .QZ 1 ABC 2 DEF 3 GHI JKL MNO PRS TUV WXY DEL-/-- SYMBOL MUTE 4 7 5 8 0 6 VOL MagicInfo Lite/S SOURCE -- Remote control button functions may differ for different products. Enter the password in the OSD menu.
Quickly select frequently used functions. TOOLS INFO Display information on the screen. Move to the upper, lower, left or right menu, or adjust an option's setting. Confirm a menu selection. Return to the previous menu. RETURN EXIT PC DVI HDMI DP A B C D MAGICINFO 3D LOCK Exit the current menu. Manually select a connected input source from PC, DVI, HDMI. It sets safe lock function. -- Remote control button functions may differ for different products.
Before Installing the Product (Installation Guide) To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the installation instructions. •• Ensure that an authorized installation company installs the wall mount. •• Otherwise, it may fall and cause personal injury. •• Make sure to install the specified wall mount. Tilting Angle and Rotation 15 ˚ ――Contact Samsung Customer Service Center for further details.
Figure 1.3 Side view Installation on an Indented Wall ――Contact Samsung Customer Service Center for further details. B D D Plane view A Minimum 40 mm B Minimum 70 mm A C Minimum 50 mm D Minimum 50 mm E Ambient temperature: Under 35 C ――When installing the product on an indented wall, allow at least the space specified above between the product and wall for ventilation and ensure that the ambient temperature is kept below 35 C. C E Figure 1.
Installing the Wall Mount Installing the Wall Mount Kit The wall mount kit (sold separately) allows you to mount the product on the wall. For detailed information on installing the wall mount, see the instructions provided with the wall mount. We recommend you contact a technician for assistance when installing the wall mount bracket. Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if you elect to install the wall mount on your own.
Wall Mount Kit Specifications (VESA) ――Install your wall mount on a solid wall perpendicular to the floor. Before attaching the wall mount to surfaces other than plaster board, please contact your nearest dealer for additional information. If you install the product on a slanted wall, it may fall and result in severe personal injury. •• Samsung wall mount kits contain a detailed installation manual and all parts necessary for assembly are provided.
Remote Control (RS232C) •• Pin assignment 1 2 3 4 5 Cable Connection RS232C Cable Interface RS232C (9 pins) Pin TxD (No.2), RxD (No.3), GND (No.
Connection •• RS232C cable Connector: 9-Pin D-Sub to Stereo Cable •• Connection 1 9 3 2 1 5 -P2- 6 -P1- 1 IN -P1Female -P1- -P2- RS232C OUT IN RS232C OUT IN RS232C OUT IN RS232C OUT -P2- Rx 2 --------> 3 Tx STEREO Tx 3 <-------- 2 Rx PLUG Gnd 5 ---------- 5 Gnd (3.
No. Control Codes Viewing control state (Get control command) Header Command 0xAA Command type ID Data length Command 0xAA Command type Command type 10 Video Wall On 0x84 0~1 11 Video Wall User Control 0x89 - E.g. Power On & ID=0 Data length Data 1 Value Checksum Command No. Value range •• All communications take place in hexadecimals. The checksum is calculated by adding up all values except the header.
Power control Volume control •• Function A product can be powered on and off using a PC. •• Function The volume of a product can be adjusted using a PC.
――MagicInfo is only available with models that contain the MagicInfo function. Input source control ――RF(TV), DTV are only available with models that include a TV. •• Function The input source of a product can be changed using a PC.
Screen mode control •• Nak •• Function The screen mode of a product can be changed using a PC. Screen mode cannot be controlled when the Video Wall function is enabled. ――This control can only be used on models that include a TV.
PIP On/Off control Auto adjustment control (PC and BNC only) •• Function The PIP mode of a product can be turned on or off using a PC. •• Function Automatically adjust the PC system screen using a PC. ――Only available on models that have the PIP function. ――The mode cannot be controlled if Video Wall is set to On. •• Viewing auto adjustment state (Get Auto Adjustment Status) None ――This function is not available in MagicInfo.
Video Wall Mode Control Safety Lock •• Function Video Wall mode can be activated on a product using a PC. •• Function PC can be used to turn the Safety Lock function on or off on a product. This control is only available on a product whose Video Wall is enabled. This control is available regardless of whether or not the power is turned on.
Video Wall On •• Nak •• Function Turn Video Wall on or off on the product from your computer. Header Command 0xAA 0xFF ID Data length Ack/Nak r-CMD Val1 3 'N' 0x84 ERR Checksum •• Get Video Wall On/Off Status Header Command 0xAA 0x84 ID Data length "ERR": A code showing what error has occurred Checksum Video Wall User Control 0 •• Function Turn the Video Wall function on or off on the product from your computer.
10x10 Video Wall Model 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Off 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 1 0x11 0x12 0x13 0x14 0x15 0x16 0x17 0x18 0x19 0x1A 0x1B 0x1C 0x1D 0x1E 0x1F 2 0x21 0x22 0x23 0x24 0x25 0x26 0x27 0x28 0x29 0x2A 0x2B 0x2C 0x2D 0x2E 0x2F 3 0x31 0x32 0x33 0x34 0x35 0x36 0x37 0x38 0x39 0x3A 0x3B 0x3C 0x3D 0x3E 0x3F 4 0x41 0x42 0x43 0x44 0x45 0x46 0x47 0x48 0x49 0x4A 0
Wall_SNo: Product Number code assigned to the product 10x10 Video Wall Model : ( 1 ~ 100) Set Number Data 1 0x01 2 0x02 ... ...
Chapter 03 Connecting and Using a Source Device Before Connecting Check the following before you connect this product with other devices. Devices that can be connected to this product include PCs, camcorders, speakers, set top boxes and DVD/Blu-ray Disc players. Pre-connection Checkpoints ――Before connecting a source device, read the user manual provided with it. The number and locations of ports on source devices may differ from device to device.
Connection using a DVI cable (Digital type) Connection Using an HDMI-DVI Cable ――When you connect a PC to the product using an HDMI-DVI cable, set Edit Name to DVI PC to access video and audio content stored on the PC.
Connection Using an HDMI Cable DVI IN RGB / DVI / HDMI / AV / COMPONENT AUDIO IN HDMI IN 39
Connecting to a Video Device Connection Using the component Cable •• Do not connect the power cable before connecting all other cables. Ensure you connect a source device first before connecting the power cable. •• You can connect a video device to the product using a cable. ――Connecting parts may differ in different products. DVI IN RGB / DVI / HDMI / AV / COMPONENT AUDIO IN ――Press the SOURCE button on the remote control to change the source.
Connection Using an HDMI-DVI Cable ――Audio will not be enabled if the product is connected to a video device using an HDMI-DVI cable. To resolve this, additionally connect an audio cable to the audio ports on the product and video device. When you connect a video device to the product using an HDMI-DVI cable, set Edit Name to DVI Devices to access video and audio content stored on the video device. ――Supported resolutions include 1080p (50/60Hz), 720p (50/60Hz), 480p, and 576p.
Connecting to an Audio System Changing the Input source ――Connecting parts may differ in different products. ――The displayed image may differ depending on the model. Source DVI IN RGB / DVI / HDMI / AV / COMPONENT AUDIO IN HDMI PC HDMI-CEC BD Player AV Component PC DVI ---- AUDIO OUT Source T MENUm : Applications Source List ENTER Source allows you to select a variety of sources and change source device names. You can display the screen of a source device connected to the product.
Chapter 04 Using MDC MDC (Multiple Display Control) is an application that allows you to easily control multiple display devices simultaneously using a PC. Configuring Settings for Multi Control MENU m :System T Multi Control ENTER Assign an individual ID to your product. Configuring settings for Multi Control •• ID Setup Assign an ID to a set. (Range: 0~99) Press to select a number, and press . •• ID Input Enter the ID number of the product connected to the input cable for input signal reception.
For details on how to use the MDC program, refer to Help after installing the program. The MDC program is available on the website. MDC installation can be affected by the graphics card, mother board and network conditions. If the directory path is not specified, the program will be installed in the default directory path. Select "Launch MDC Unified" and click "Finish" to run the MDC program immediately. MDC Program Installation/Uninstallation Installation 1 Click the MDC Unified installation program.
Connecting to MDC Multiple display control "MDC" is an application that allows you to easily control multiple display devices simultaneously using a PC. Using MDC via RS-232C (serial data communications standards) An RS-232C serial cable must be connected to the serial ports on the PC and monitor.
Chapter 05 Screen Adjustment Configure the Picture settings (Backlight, Color Tone, etc.). -- The layout of the Picture menu options may vary depending on the product. Picture Mode MENU m :Picture T Picture Mode Select a picture mode (Picture Mode) suitable for the environment where the product will be used. Different Picture Mode options are displayed depending on the current input source.
Backlight / Contrast / Brightness / Sharpness / Color / Tint (G/R) MENU m :Picture T ENTER Picture Picture Mode Information · Backlight 100 100 · Contrast 100 100 · Brightness 45 45 · Sharpness 50 50 · Color 50 50 · Tint (G/R) G50 50 Your product has several options for adjusting picture quality.
Picture Size MENU m :Picture T Picture Size Picture Size If you have a cable box or satellite receiver, it may have its own set of screen sizes as well. However, we highly recommend you use your product’s 16:9 mode most of the time. ENTER •• 16:9: Sets the picture to 16:9 wide mode. •• Zoom1: Use for moderate magnification. Cuts off the top and sides. Picture Size Picture Size •• Zoom2: Use for a stronger magnification.
Picture Sizes available by Input Source.
Position Adjusts the picture position. Position is only available if Picture Size is set to Zoom1, Zoom2, Wide Fit, Screen Fit. ――To use the Position function after selecting Zoom1, Zoom2, Wide Fit, Screen Fit or Original Ratio, follow these steps. Picture Size Picture Size 16:9 · Position Resolution Select 1 Press the button to select Position. Press the 2 Press the or 3 Press the button. button to move the picture up or down. button.
Resolution Select If the picture is not normal even when the resolution of the graphics card is one of the following, you can optimize the picture quality by selecting the same resolution for the product as the PC using this menu. Available resolutions: Off / 1024x768 / 1280x768 / 1360x768 / 1366x768 Picture Size Picture Size 16:9 · Position Resolution Select Off -- Available in PC mode only. -- The displayed image may differ depending on the model.
PC Screen Adjustment •• Coarse / Fine Removes or reduces picture noise. If the noise is not removed by Fine-tuning alone, use the Coarse function to adjust the frequency as best as possible (Coarse) and Fine-tune again. After the noise has been reduced, re-adjust the picture so that it is aligned with the center of screen. PC Screen Adjustment Coarse Fine Position 50 0 •• Position To adjust the PC’s screen position if it is not centered or does not fit the product screen.
PIP T MENUm : System PIP Settings PIP ENTER The picture from the external video source will be in the main screen and the picture from the product will be in the PIP subpicture screen. Main picture Sub picture Picture AV PC, DVI, HDMI PIP Component DVI, HDMI PC AV, DVI, HDMI DVI, HDMI AV, PC, Component -- The displayed image may differ depending on the model. -- For PIP sound, refer to the Sound Select instructions.
Advanced Settings MENU m :Picture T Advanced Settings Input Source ENTER Advanced Settings Dynamic Contrast Medium Black Tone Off Flesh Tone 0 RGB Only Mode Color Space Picture Mode PC, DVI, HDMI (when a PC is connected) Advanced Settings Information White Balance / Gamma Advertisement White Balance / Gamma AV, Component, HDMI Natural / Dynamic Not available AV, Component, HDMI Standard Dynamic Contrast / Black Tone / Flesh Tone / RGB Only Mode / Color Space / White Balance / Gamma / M
Color Space Advanced Settings Adjusts the range and variety of colors (the color space) available to create images. Color Space Native White Balance White Balance Gamma Motion Lighting •• Auto / Native 0 Off Adjust the color temperature for a more natural picture. •• R-Offset / G-Offset / B-Offset: Adjust each color’s (red, green, blue) darkness. •• R-Gain / G-Gain / B-Gain: Adjust each color’s (red, green, blue) brightness. •• Reset: Resets the White Balance to its default settings.
Picture Options MENUm Picture : TPicture Options Select an option using the Color Temp. arrow keys, and the press Use the arrow keys to change the setting, and then press ENTER Input source PC Picture Options Color Tone and Standard 10000K Digital Clean View Off MPEG Noise Filter Off HDMI Black Level Normal Film Mode Off Dynamic Backlight Off DVI, HDMI(when a PC is connected) AV, Component, HDMI Picture Mode . . Picture Options Information Color Tone / Color Temp.
Color Tone Picture Options Color Tone Color Temp. Standard 10000K Digital Clean View Off MPEG Noise Filter Off HDMI Black Level Normal Film Mode Off Dynamic Backlight Off If the input source is PC, DVI, HDMI(PC connection). •• Off / Cool / Standard / Warm If the input source is AV, Component, HDMI. •• Off / Cool / Standard / Warm1 / Warm2 ――Warm1 or Warm2 will be deactivated when the Picture Mode is Dynamic.
HDMI Black Level Picture Options HDMI Black Level Normal Film Mode Off Dynamic Backlight Off Selects the black level on the screen to adjust the screen depth. •• Normal / Low ――Available only in HDMI mode (AV Timing : 480p, 576p, 720p, 1080i, 1080p). Film Mode This mode is suitable to view movies. -- The displayed image may differ depending on the model. Sets the product to automatically sense and process film signals from all sources and adjust the picture for optimum quality.
Picture Off The product screen is turned off but the audio will continue. Press any key on your remote to turn the screen back on. Picture Picture Off Reset Picture -- The displayed image may differ depending on the model. Reset Picture Resets your current picture mode to its default settings. Picture Picture Off Reset Picture -- The displayed image may differ depending on the model.
Chapter 06 Sound Adjustment Configure the sound (Sound) settings for the product. Sound Mode MENU m :Sound T Sound Mode You can select a sound mode to suit your personal preferences. •• Standard: Selects the normal sound mode. ENTER •• Movie: Provides the best sound for movies. •• Clear Voice: Emphasizes voices over other sounds. Sound Sound Mode •• Music: Emphasizes music over voices.
Sound Effect MENU m :Sound T Sound Effect Configure your preferred sound effect for output sound. ――If Speaker Select is set to External, Sound Effect is disabled. ENTER Sound Sound Mode Standard Sound Effect Speaker Settings Reset Sound ――Available only when Sound Mode is set to Standard. •• DTS TruSurround (Off / On) This function provides a virtual 5.1 channel surround sound experience through a pair of speakers using HRTF(Head Related Transfer Function) technology.
Speaker Settings MENU m :Sound T Speaker Settings ENTER Sound •• Speaker Select (External / Internal / Receiver) If you are listening to the sound track of a broadcast or movie through an external receiver, you may hear a sound echo caused by the difference in decoding speed between the products speakers and the speakers attached to your audio receiver. If this occurs, set the product to External. ――When you set Speaker Select to External, the products speakers are turned off.
Chapter 07 Applications Source List Refresh T MENUm : Applications Source List TOOLS Refresh Source allows you to select a variety of sources and change source device names. If you cannot find a device you want, select Refresh to refresh the list. You can display the screen of a source device connected to the product. Select a source from Source List to display the screen of the selected source. ――The input source can also be changed by using the SOURCE button on the Edit Name remote control.
Chapter 08 System Menu Language Set the menu language. ――A change to the language setting will only be applied to the onscreen menu display. It will not be applied to other functions on your PC. T MENUm : System Menu Language ENTER System Menu Language English Multi Control Time Eco Solution Screen Burn Protection Ticker Off -- The displayed image may differ depending on the model.
Multi Control MENU m : System T Multi Control Configuring settings for Multi Control •• ID Setup Assign an ID to a set. (Range: 0~99) ENTER Press to select a number, and press . •• ID Input Enter the ID number of the product connected to the input cable for input signal reception. System Menu Language or English Enter the number you want using the number buttons on the remote control.
Time MENU m : System T You can configure Clock Set or Sleep Timer. You can also set the product to automatically turn on or off at a specified time using the Timer function. Time ENTER Time Clock Set Sleep Timer Clock Set Set the clock to use the various various timer features of the product. •• Clock Set Set the Date and Time. Select Clock Set. Select Date or Time, and then press . Use the number buttons to enter numbers or press the up and down arrow buttons.
Time On Timer On Timer Set On Timer so that your product turns on automatically at a time and on a day of your choosing. The power is turned on with the specified volume or input source. Off Timer On Timer: Set the on timer by making a selection from one of the seven options. Ensure you set the current time first. Holiday Management (On Timer1 ~ On Timer7 ) ――You must set the clock before you can use On Timer. •• Setup: Select Off, Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or Manual.
Time On Timer Off Timer Holiday Management Off Timer Set the off timer (Off Timer) by making a selection from one of the seven options. (Off Timer1 ~ Off Timer7) ――You must set the clock before you can use Off Timer. •• Setup: Select Off, Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or Manual. If you select Manual, you can choose the days you want Off Timer to turn off your product. ――The check mark indicates days you’ve selected. •• Time: Set the hour and minute.
Eco Solution Energy Saving Reduce the power consumption by adjusting the screen brightness. T Eco Solution MENUm : System ENTER •• Off / Low / Medium / High Eco Sensor Eco Solution Energy Saving Off Eco Sensor Off Auto Power Off Off To enhance your power savings, the picture settings will automatically adapt to the light in the room. •• Off / On ――Adjusting the Backlight setting under Picture while Eco Sensor is on will disable the Off. •• Min.
Screen Burn Protection T MENUm : System Screen Burn Protection To reduce the possibility of screen burn, this unit is equipped with Pixel Shift screen burn prevention technology. Pixel Shift moves the picture slightly on the screen. ENTER Pixel Shift Screen Burn Protection Minimize image retention by finely moving pixels horizontally or vertically. Pixel Shift Off Timer Off Immediate Display Off Side Gray Off -- The displayed image may differ depending on the model.
Timer Screen Burn Protection You can set the timer for Screen Burn Protection. Pixel Shift Off Timer Off •• Off Immediate Display Off •• Repeat: Display the image retention-preventive pattern set in Mode at specified time intervals(Period). ―― Period and Time can be configured when Repeat is selected. Side Gray Off -- The displayed image may differ depending on the model. The Pixel Shift feature stops automatically after a specified period of time.
Immediate Display Screen Burn Protection Pixel Shift Off Timer Off Immediate Display Off Side Gray Off Select the screen saver you want to display immediately. •• Off / Pixel / Rolling Bar / Fading Screen Side Gray When the screen is set to 4:3 aspect ratio, adjust the brightness of white margins on sides to protect the screen. •• Off / Light / Dark -- The displayed image may differ depending on the model.
Ticker T MENUm : System Input text while a video or image is displayed and display the text on the screen. Ticker ENTER System Screen Burn Protection Ticker Video Wall Source AutoSwitch Settings •• Off / On ――Message, Time, Position, Motion, and Font Style are enabled only when Ticker is set to On. •• Message: Enter a message to display on the screen. •• Time: Set the Start Time and End Time to display a Message. •• Position: Select an orientation to display a Message from Horizontal and Vertical.
Video Wall T MENUm : System Customize the layout of multiple displays that are connected to form a video wall. In addition, display part of a whole picture or repeat the same picture on each of the connected multiple displays. Video Wall Video Wall ENTER You can activate or deactivate Video Wall. Video Wall To organize a video wall, select On. Video Wall On · Format Full · Horizontal 1 · Vertical 1 · Screen Position Format Select a format to display images on multiple displays.
Vertical Video Wall Video Wall On · Format Full · Horizontal 1 · Vertical 1 · Screen Position This function automatically divides the screen according to the specified number of vertical displays. Enter the number of vertically arranged displays. The vertical screen will automatically be divided according to the number entered. A maximum of 15 displays can be assigned to the vertical arrangement.
Source AutoSwitch Settings Turning on the display with Source AutoSwitch On, and the previous video source selection is not active, the display will automatically search the different video input sources for active video. T MENUm : System Source AutoSwitch Source AutoSwitch Settings ENTER When the Source AutoSwitch is On, the display video source will automatically be searched for active video.
Change PIN T MENUm : System Change PIN The Change PIN screen will appear. Choose any 4 digits for your PIN and enter it in Enter New PIN. Reenter the same 4 digits in Confirm New PIN. ENTER When the Confirm screen disappears, press the Close button. The product has memorized your new PIN. System Change PIN -- The displayed image may differ depending on the model.
General Max. Power Saving Turns off the product to reduce power consumption after the PC has been left idle for a specified period of time. T MENUm : System General •• Off / On ――Available only PC, DVI, HDMI mode. ENTER General Game Mode Max. Power Saving On Game Mode Off When connecting to a game console such as PlayStation™ or Xbox™, you can enjoy a more realistic gaming experience by selecting game mode.
Button Lock General This menu can be used to lock the buttons on the product. Max. Power Saving On Game Mode Off Auto Power Off Standby Control Safety Lock Off You can set the screen standby mode to be applied when an input signal is received. Button Lock Off Standby Control Off Lamp Schedule Off Only the remote control can control the product if Button Lock is set to On.
OSD Display General Displays or hides a menu item on the screen. ――Source OSD / No Signal OSD / MDC OSD OSD Display Power On Adjustment 0 sec Temperature Control 77 Power On Adjustment You can set the warm-up time for the screen to turn on after the power button is pressed. (Range: 0 – 50 seconds) ――A warm-up time that is too short may damage the product due to overvoltage. -- The displayed image may differ depending on the model.
Anynet+ (HDMI-CEC) Anynet+ (HDMI-CEC) T MENUm : System Anynet+ is a function that enables you to control all connected Samsung devices that support Anynet+ with your Samsung product remote. The Anynet+ system can be used only with Samsung devices that have the Anynet+ feature. To be sure your Samsung device has this feature, check if there is an Anynet+ logo on it. ――You can only control Anynet+ devices using the product remote control, not the buttons on the product.
Auto Turn Off Anynet+ (HDMI-CEC) Anynet+ (HDMI-CEC) On Auto Turn Off Yes Setting an Anynet+ Device to turn Off automatically when the product is turned off. •• No / Yes ――If Auto Turn Off is set to Yes, running external devices will turn off at the same time as the product powers off. ――May not be enabled depending on the device. Switching between Anynet+ Devices -- The displayed image may differ depending on the model.
Troubleshooting for Anynet+ Problem Anynet+ does not work. Possible Solution •• Check if the device is an Anynet+ device. The Anynet+ system supports Anynet+ devices only. •• You can connect only one receiver (home theater). •• Check if the Anynet+ device power cord is properly connected. •• Check the Anynet+ device’s Video/Audio/HDMI cable connections. •• Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+setup menu. •• Check whether the remote control is Anynet+ compatible.
Problem The connected device is not displayed. Possible Solution •• Check whether or not the device supports Anynet+ functions. •• Check whether or not the HDMI cable is properly connected. •• Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+ System menu. •• Search Anynet+ devices again. •• Anynet+ requires an HDMI connection. Make sure the device is connected to your product with an HDMI cable. •• Some HDMI cables may not support Anynet+ functions.
Magic Clone T Magic Clone MENUm : System Export the product settings to a USB device or load the settings via a USB device. This option is useful when assigning the same settings to several products. ENTER Magic Clone •• Clone to USB: Copy the product settings to a USB device. •• Clone From USB: Assign the settings saved in a USB device to the product. -- After configuration is complete, the product is rebooted automatically.
Reset All T Reset All MENUm : System This option returns all the current settings for a display to the default factory settings. ENTER System Reset All -- The displayed image may differ depending on the model.
Chapter 09 Support Software Update T MENUm : Support Software Update ENTER The Software Update menu lets you upgrade your product software to the latest version. ――Be careful not to turn off the power until the upgrade is complete. The product will turn off and on automatically after completing the software upgrade. ――When you upgrade software, all video and audio settings you have made will return to their default settings.
Chapter 10 Troubleshooting Guide Requirements Before Contacting Samsung Customer Service Center Before calling Samsung Customer Service Center, test your product as follows. If the problem persists, contact Samsung Customer Service Center. Testing the Product Check if your product is operating normally by using the product test function. If the screen remains blank while the power LED blinks even when the product is correctly connected to a PC, perform product testing.
Check the followings. Installation issue (PC mode) The screen keeps switching on and off. Check the cable connection between the product and PC, and ensure the connection is secure. Blank spaces are found on all four sides of the screen when an HDMI or HDMI-DVI cable is connected to the product and PC. The blank spaces found on the screen have nothing to do with the product. Blank spaces on the screen are caused by the PC or graphics card.
Screen issue The screen is not clear. The screen is blurry. Adjust Coarse and Fine. Remove any accessories (video extension cable, etc) and try again. Set the resolution and frequency to the recommended level. The screen appears unstable and shaky. There are shadows or ghost images left on the screen. Check that the resolution and frequency of the PC and graphics card are set within a range compatible with the product.
Screen issue The screen display does not look normal. Encoded video content may cause the display to appear corrupted in scenes featuring fast moving objects such as in a sports event or action video. Low signal level or low picture quality may cause the display to appear corrupted. This does not mean the product is defective. A cell phone within a distance of one-meter radius may cause static on analog and digital products. The brightness and color do not look normal.
Sound issue There is no sound. Check the connection of the audio cable or adjust the volume. Check the volume. The volume is too low. Adjust the volume. If the volume is still low after turning it up to the maximum level, adjust the volume on your PC sound card or software program. Video is available but there is no sound. If an HDMI cable is connected, check the audio output settings on the PC. Go to Sound and change Speaker Select to Internal.
Sound issue There is audible sound when the volume is muted. When Speaker Select is set to External, the volume button and mute function are disabled. Adjust the volume for the external speakers. Audio settings for main speakers are separate from the internal speakers on the product. Changing or muting the volume on the product does not affect an external amplifier(decoder). Sound from the monitor does not change after Sound Mode is changed.
Other issue Small particles are found on the edges of the product. The particles are part of the product design. The product is not defective. The PIP menu is not available. The menu is enabled or disabled depending on the Source mode. ――Refer to page 53 for details about the PIP menu. When I try to change the PC resolution, a message "The defined resolution is not currently supported." appears. The message "The defined resolution is not currently supported.
Other issue The IR sensor is not functioning. Make sure the sensor light turns on when a button is pressed on the remote control. •• If the sensor light does not turn on, turn the power switch off and then on again on the back of the product. (The power LED lights up red when the screen is switched off.) If the sensor light still does not turn on after the power switch is turned off and then on again, an internal jack may be disconnected. Contact your nearest service center to have the product serviced.
Q&A Question How can I change the frequency? Answer Set the frequency on your graphics card. •• Windows XP: Go to Control Panel → Appearance and Themes → Display → Settings → Advanced → Monitor and adjust the frequency in Monitor Settings. •• Windows ME/2000: Go to Control Panel → Display → Settings → Advanced → Monitor and adjust the frequency in Monitor Settings. Refer to the user manual for your PC or graphics card for further instructions on adjustment.
Question How do I set powersaving mode? Answer •• Windows XP: Set power-saving mode in Control Panel → Appearance and Themes → Display → Screen Saver Settings or BIOS SETUP on the PC. •• Windows ME/2000: Set power-saving mode in Control Panel → Display → Screen Saver Settings or BIOS SETUP on the PC. •• Windows Vista: Set power-saving mode in Control Panel → Appearance and Personalization → Personalize → Screen Saver Settings or BIOS SETUP on the PC.
Chapter 11 Specifications 1 General Size Model Name Panel 2 ED65D Size 65 Class (64.5 inches / 163 cm) 75 Class (75 inches / 189 cm) Display area 1431.4 (H) x 806.5 (V) mm 1653.3 (H) x 931.3 (V) mm 56.4 (H) x 31.8 (V) inches 65.1 (H) x 36.7 (V) inches 1467.5 x 848.0 x 65.0 mm 1675.0 x 958.5 x 65.0 mm 57.8 x 33.4 x 2.6 inches 65.9 x 37.7 x 2.6 inches Weight (without stand) 26.8 kg / 59.1 lbs 28.8 kg / 63.5 lbs Power Supply This product uses 100 to 240V.
――Plug-and-Play This monitor can be installed and used with any Plug-and-Play compatible systems. Two-way data exchange between the monitor and PC system optimizes the monitor settings. Monitor installation takes place automatically. However, you can customize the installation settings if desired. ――Panel Dots (Pixels) Due to the nature of the manufacturing of this product, approximately 1 pixel per million (1ppm) may appear brighter or darker on the panel. This does not affect product performance.
PowerSaver The power-saving function of this product reduces power consumption by switching off the screen and changing the color of the power LED if the product is not used for a specified period of time. The power is not turned off in power-saving mode. To switch the screen back on, press any key on the keyboard or move the mouse. Powersavign mode only functions when the product is connected to a PC with a power-saving function.
Preset Timing Modes ――This product can be set to only one resolution for each screen size to obtain the optimum picture quality due to the nature of the panel. Using a resolution other than the specified resolution may degrade the picture quality. To avoid this, it is recommended that you select the optimum resolution specified for your product. Check the frequency when you exchange a CDT product (connected to a PC) for an LCD product.
Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock (MHz) Sync Polarity (H/V) VESA, 800 x 600 35.156 56.250 36.000 +/+ VESA, 800 x 600 37.879 60.317 40.000 +/+ VESA, 800 x 600 48.077 72.188 50.000 +/+ VESA, 800 x 600 46.875 75.000 49.500 +/+ VESA, 1024 x 768 48.363 60.004 65.000 -/- VESA, 1024 x 768 56.476 70.069 75.000 -/- VESA, 1024 x 768 60.023 75.029 78.750 +/+ VESA, 1280 x 720 45.000 60.000 74.250 +/+ VESA, 1280 x 1024 63.981 60.
Chapter 12 Appendix Contact SAMSUNG WORLD WIDE ――If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. NORTH AMERICA U.S.A 1-800-SAMSUNG (726-7864) CANADA 1-800-SAMSUNG (726-7864) http://www.samsung.com/us http://www.samsung.com/ca (English) http://www.samsung.com/ca_fr (French) LATIN AMERICA ARGENTINE 0800 333 3733 http://www.samsung.com.ar BOLIVIA 800-10-7260 http://www.samsung.
LATIN AMERICA http://www.samsung.com/latin (Spanish) COSTA RICA 0-800-507-7267 DOMINICA 1-800-751-2676 ECUADOR 1-800-10-7267 EL SALVADOR 800-6225 GUATEMALA 1-800-299-0013 HONDURAS 800-27919267 JAMAICA 1-800-234-7267 NICARAGUA 001-800-5077267 MEXICO 01-800-SAMSUNG (726-7864) PANAMA 800-7267 PARAGUAY 009 800 542 0001 http://www.samsung.com.py PERU 0-800-777-08 http://www.samsung.com/pe PUERTO RICO 1-800-682-3180 http://www.samsung.com http://www.samsung.
LATIN AMERICA TRINIDAD & TOBAGO 1-800-SAMSUNG (726-7864) http://www.samsung.com URUGUAY 000 405 437 33 http://www.samsung.com VENEZUELA 0-800-100-5303 http://www.samsung.com/ve AUSTRIA 0810 - SAMSUNG (7267864, € 0.07/min) http://www.samsung.com BELGIUM 02-201-24-18 BOSNIA 051 331 999 http://www.samsung.com BULGARIA 07001 33 11 , share cost tariff http://www.samsung.com/bg CROATIA 062 SAMSUNG (062 726 786) http://www.samsung.com/hr CYPRUS 8009 4000 only from landline http://www.
EUROPE 0180 6 SAMSUNG bzw. GERMANY http://www.samsung.com 0180 6 7267864* (*0,20 €/Anruf aus dem dt. Festnetz, aus dem Mobilfunk max. 0,60 €/Anruf ) GREECE 80111-SAMSUNG (80111 726 7864) only from land line (+30) 210 6897691 from mobile and land line http://www.samsung.com/gr HUNGARY 06-80-SAMSUNG (726-7864) http://www.samsung.com/hu ITALIA 800-SAMSUNG (726-7864) http://www.samsung.com LATVIA 8000-7267 http://www.samsung.com/lv LITHUANIA 8-800-77777 http://www.samsung.
EUROPE SLOVAKIA 0800 - SAMSUNG (0800-726 786) http://www.samsung.com SPAIN 902172678 http://www.samsung.com SWEDEN 0771 726 7864 (SAMSUNG) http://www.samsung.com SWITZERLAND 0848 - SAMSUNG (7267864, CHF 0.08/min) U.K 0330 SAMSUNG (7267864) http://www.samsung.com ARMENIA 0-800-05-555 http://www.samsung.com AZERBAIJAN 088-55-55-555 http://www.samsung.com BELARUS 810-800-500-55-500 http://www.samsung.com GEORGIA 0-800-555-555 http://www.samsung.
CIS UZBEKISTAN 8-10-800-500-55-500 http://www.samsung.com AUSTRALIA 1300 362 603 http://www.samsung.com/au CHINA 400-810-5858 http://www.samsung.com HONG KONG (852) 3698 4698 ASIA PACIFIC INDIA INDONESIA 1800 3000 8282 1800 266 8282 0800-112-8888 (Toll Free) (021) 56997777 http://www.samsung.com/hk (Chinese) http://www.samsung.com/hk_en (English) http://www.samsung.com/in http://www.samsung.com/id JAPAN 0120-327-527 http://www.samsung.com MALAYSIA 1800-88-9999 http://www.samsung.
ASIA PACIFIC VIETNAM 1800 588 889 http://www.samsung.com ALGERIA 0800 100 100 http://www.samsung.com/n_africa BAHRAIN 8000-4726 EGYPT 08000-726786 http://www.samsung.com IRAN 021-8255 http://www.samsung.com MENA JORDAN 0800-22273 06 5777444 http://www.samsung.com/ae (English) http://www.samsung.com/ae_ar (Arabic) http://www.samsung.com/Levant (English) http://www.samsung.
MENA TUNISIA 80-1000-12 http://www.samsung.com/n_africa TURKEY 444 77 11 http://www.samsung.com U.A.E 800-SAMSUNG (726-7864) http://www.samsung.com BOTSWANA 8007260000 http://www.samsung.com BURUNDI 200 http://www.samsung.com CAMEROON 7095-0077 http://www.samsung.com COTE D’ IVOIRE 8000 0077 http://www.samsung.com DRC 499999 http://www.samsung.com 0800-10077 http://www.samsung.com AFRICA GHANA 0302-200077 KENYA 0800 545 545 http://www.samsung.
AFRICA SUDAN 1969 http://www.samsung.com TANZANIA 0685 88 99 00 http://www.samsung.com UGANDA 0800 300 300 http://www.samsung.com ZAMBIA 0211 350370 http://www.samsung.
Responsibility for the Pay Service (Cost to Customers) ――When the service is requested, in spite of in warranty, we may charge you for a visit from a service technician in the following cases. Not a product defect Cleaning of the product, Adjustment, Explanation, Re-installation and etc. •• If a service technician gives instructions on how to use product or simply adjusts options without disassembling product. •• If a defect is caused by external environmental factors (Internet, Antenna, Wired Signal, etc.
Optimum Picture Quality and Afterimage Burn-in Prevention Optimum Picture Quality •• Due to the nature of the manufacturing of this product, approximately 1 pixel per million (1ppm) may be brighter or darker on the panel. This does not affect product performance. -- The number of sub-pixels by panel type: 6,220,800 •• Run Auto Adjustment to improve the picture quality. If noise is still found even after auto adjustment, adjust Coarse or Fine.
•• Avoid combinations of a text color and background color of contrasting brightness. ――Avoid using grey as it may contribute to afterimage burn-in. ――Avoid using colors of contrasting brightness (black and white; grey). FLIGHT : TIME FLIGHT : TIME OZ348 : 20:30 OZ348 : 20:30 •• Regular Text color Change -- Use bright colors of similar brightness.
License DivX Certified Ⓡ to play DivX Ⓡ video up to HD 1080p, including premium content. Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. ® Premium Sound 5.1 Manufactured under a license from U.S. Patent No’s: 5,956,674, 5,974,380, 5,978,762, 6,487,535, 6,226,616, 7,212,872, 7,003,467, 7,272,567, 7,668,723, 7,392,195, 7,930,184, 7,333,929 and 7,548,853.
Terminology 480i / 480p / 720p / 1080i / 1080p____ Each of the scanning rates above refers to the number of effective scanning lines that decides the screen resolution. The scanning rate may be indicated in i (interlaced) or p (progressive), depending on the scanning method. - Scanning Scanning refers to a process of sending pixels that form an image progressively. A larger number of pixels will deliver a clearer and more vivid picture.
