User guide type 35104373 User guide, English OneRemote RMB4 controller installed in a Bang & Olufsen Beo4 remote control. Operate these devices using the modified Beo4: Samsung LED TV 7-series and other. Operate devices that are operate able with RCU’s like: Samsung most remotes for Samsung digital TV.
Congratulations With the OneRemote controller installed inside your Bang & Olufsen Beo4 remote control, you can fully operate your non B&O TV with this terminal. This guide explains how. If your Beo4 has already been correctly set up, you can now proceed to one of the two operation tables: Page 9 If your Beo4 has enabled Navi buttons . *1 Page 8 In any other case.
The OneRemote controller for the Beo4 remote control The OneRemote controller is a small microcomputer module, which is specifically made to be built in to a Bang & Olufsen Beo4 remote control. The controller captures the commands that were meant for operating a Bang & Olufsen device. Before the commands are emitted from the Beo4, these commands are converted, and therefore also able to operate a non Bang & Olufsen TV.
Operating with OneRemote. To be able to operate the non B&O TV optimal using the OneRemote modified Beo4, the user has to be familiar with the operations available when using the original remote control, as described in the TV’s user manual. A beo4 remote control is not equipped with as many keys as most remote controls for non B&O devices. We have designed an operation ‘layout’ that works logically, even when shifting between different OneRemote operated devices.
Programme stepping, up/ down manoeuvring in menus. Most set top boxes and TV’s has 4 arrow buttons for manoeuvring in on-screen menus, up, down, left and right. In addition they are equipped with separate programme stepping buttons for zapping through the programme list. Often these keys are named P+, P -, CH+ or CH-. OneRemote often makes use of the Rand the W keys for programme zapping.
Disabling and Dual TV Option The OneRemote controller in the modified Beo4 remote control can be enabled or disabled using this option. When disabled the Beo4 remote control operates as a Beo4 that has not been modified. In DUAL TV-mode the OneRemote controller enables operation of both a B&O TV and the non B&O TV which the controller is made to operate. Disabling and Dual TV mode: Enter one of these 3 codes within 10 seconds to set the preffered mode. LIGHT mq20p Disables the OneRemote controller.
Translation table when not in Navigation mode. * see page 10 Daily operation Text TV operation t w Turns on the TV Turns off the TV OO Enter W*1*2 R*1*2 Prog + Prog - Q*1*2 E*1*2 Guide Return e m om Exit Source Menu Text TV on/ mix Text TV off TEXT t Playback operations TTV page+ TTV page - Play press 1 sec.
Translation table when in Navigation mode. * see page xxxxxx Daily operation Text TV operation t w Turns on the TV Turns off the TV OO Enter DF CH+ / CHREW / FF AS Playback operations Navi buttons are used for manoeuvring in onscreen menus.
Beo4 NAVI mode option. Newer Beo4 models are named Beo4 Navi due to an added special navigation button. A joystick type control button, placed where previous Beo4 models have a Obutton.
Setting the OneRemote Volume Option When the TV mode is selected by pressing the t button, it automatically powers on the TV and turns on the picture. But often the sound is lead to external speakers attached to a B&O audiomaster or another amplifier. This option set the way that the OneRemote handles volume in TV mode. This option also can power on other B&O devices than the TV, when t is selected. Audio is then typically fed from the TV to the audiomaster from using a Line to Datalink cable.
The Beo4 VMEM / VTAPE button option On your OneRemote modified Beo4 remote control, the VMEM button can be programmed, to open a specific source on your non B&O TV. VMEM/ VTAPE options Enter one of these codes within 10 seconds, to select the source on the non B&O TV that will be selected with the VMEM or VTAPE button. LIGHT mT01p No new source selected. LIGHT mT11p The AV1 socket on the TV is opened. LIGHT mT21p The AV2 socket on the TV is opened. LIGHT mT31p The DTV tuner on the TV is opened.
The Beo4 DTV/ SAT button option On your OneRemote modified Beo4 remote control, the DTV/ SAT button can be programmed, to open a specific source on your non B&O TV. DTV/ SAT options Enter one of these codes within 10 seconds, to select the source on the non B&O TV that will be selected with the DTV/ SAT button. LIGHT mf01p No new source selected. LIGHT mf11p The AV1 socket on the TV is opened. LIGHT mf21p The AV2 socket on the TV is opened. LIGHT mf31p The DTV tuner on the TV is opened.
The Beo4 DVD button option On your OneRemote modified Beo4 remote control, the DVD button can be programmed, to open a specific source on your non B&O TV. DVD options Enter one of these codes within 10 seconds, to select the source on the non B&O TV that will be selected with the VMEM or VTAPE button. LIGHT md01p No new source selected. LIGHT md11p The AV1 socket on the TV is opened. LIGHT md21p The AV2 socket on the TV is opened. LIGHT md31p The DTV tuner on the TV is opened.
The Beo4 VAUX button option On your OneRemote modified Beo4 remote control, the VAUX button in the Listmenu can be programmed, to open a specific source on your non B&O TV. VAUX options Enter one of these codes within 10 seconds, to select the source on the non B&O TV that will be selected with the VMEM or VTAPE button. LIGHT ma01p No new source selected. LIGHT ma11p The AV1 socket on the TV is opened. LIGHT ma21p The AV2 socket on the TV is opened. LIGHT ma31p The DTV tuner on the TV is opened.
Made in Denmark by www.oneremote.
