User Manual
Table Of Contents
- FDR_RF8000B_SG_DA68-04540C-00_EN
- Safety information
- What you need to know about the safety instructions
- Important safety symbols and precautions:
- State of California Proposition 65 Warning
- Important safety precautions
- Severe warning signs for transportation and site
- Critical installation warnings
- Installation cautions
- Critical usage warnings
- Usage cautions
- Cleaning cautions
- Critical disposal warnings
- Preparation
- Installation
- Operations
- Maintenance
- Troubleshooting
- LIMITED WARRANTY (U.S.A.)
- Regulatory Notice
- Safety information
- FDR_RF8000B_SG_DA68-04540C-00_MES
- Información sobre seguridad
- Qué debe saber sobre las instrucciones de seguridad
- Símbolos importantes de seguridad y precauciones:
- Advertencias de la Proposición 65 del Estado de California
- Precauciones de seguridad importantes
- Señales de advertencia importantes para el transporte y el emplazamiento
- Advertencias críticas sobre instalaciones
- Precauciones de instalación
- Advertencias críticas sobre el uso
- Precauciones de uso
- Precauciones para la limpieza
- Advertencias críticas sobre el desecho del producto
- Preparación
- Instalación
- Funcionamiento
- Mantenimiento
- Solución de problemas
- GARANTÍA LIMITADA (EE. UU.)
- Aviso regulatorio
- Información sobre seguridad
English 29
Operations
To check the MAC address
1. Tap the Settings icon on the Home screen.
2. Scroll down to and open About Family Hub.
3. The screen displays (among others) the Wi-Fi MAC address.
Peak Demand Off (Override mode)
When you want the refrigerator to ignore the SMART GRID (Demand Response) signal from
the utility company, you can activate Peak Demand Off (Override mode).
When you activate Peak Demand Off (Override mode), the refrigerator ignores the SMART
GRID (Demand Response) signal and is not controlled by the utility company.
Activating and deactivating Peak Demand Off (Override mode)
1. Tap the Fridge Manager icon on the Home screen.
2. Open the Fridge Settings menu on the bottom of the screen.
3. Open the Demand Response menu.
4. Turn the Peak Demand Off (Override mode) on and off. Tap and drag the button to
activate or deactivate “Demand Off”.
NOTE
• Alternatively, you can activate or deactivate Peak Demand Off (Override mode) using
the SmartThings app and the Energy Management function. See the next page.
Using the Energy Management Function
The Energy Management function enables you to control and monitor your Energy
Management refrigerator using the SmartThings app for your convenience.
NOTE
• To use the Energy Management refrigerator functions, you have to install the
corresponding app rst.
1. Operational Status
- You can check the DR and Peak Demand status.
2. Energy Consumption Reporting
- Shows the accumulated power consumption. Power consumption data is updated
every 10 minutes.
NOTE
The energy consumption report may differ from the power consumption specications of
the product depending on the operating environment and the stored food.
3. Delay Defrost Capability
- The Delay Defrost Capability function saves energy by delaying the defrost
operation to a time specied by the user. You can congure the time. and this
function will save energy during the specied period in a 24 hour cycle. If the time
is not set, the function works with the default time settings. The default time settings
are below:
- 6 am to 10 am: 1st. November ~ 30th. April
- 3 pm to 7 pm: 1st. May ~ 31th. October
FDR_RF8000B_SG_DA68-04540C-00_EN.indd 29 2022-07-21 11:12:58