User Manual
Table Of Contents
- T-TYPE_RF9000A_DA68-04023U-00_EN
- Safety information
- What you need to know about the safety instructions
- Important safety symbols and precautions:
- Important safety precautions
- Severe warning signs for transportation and site
- Critical installation warnings
- Installation cautions
- Critical usage warnings
- Usage cautions
- Cleaning cautions
- Critical disposal warnings
- Additional tips for proper usage
- Instructions about the WEEE
- Installation
- Operations
- Maintenance
- Troubleshooting
- Open Source Announcement
- Safety information
- T-TYPE_RF9000A_DA68-04023U-00_MES
- Información sobre seguridad
- Qué debe saber sobre las instrucciones de seguridad
- Símbolos y advertencias de seguridad importantes:
- Precauciones importantes de seguridad
- Señales de advertencia importantes para el transporte y el emplazamiento
- Advertencias muy importantes para la instalación
- Precauciones para la instalación
- Advertencias muy importantes para el uso
- Precauciones de uso
- Precauciones para la limpieza
- Advertencias muy importantes para la eliminación de residuos
- Recomendaciones adicionales para el uso adecuado
- Instrucciones acerca de WEEE
- Instalación
- Funcionamiento
- Mantenimiento
- Solución de problemas
- Open Source Announcement
- Información sobre seguridad
English 47
Installation
STEP 6 Connect to a water source (applicable models only)
CAUTION
• The new hose-sets supplied with the appliance are to be used and that old hose-sets
should not be reused.
• The water line must be connected by a qualied technician.
• The warranty for your refrigerator does not cover the water line installation. The
water line installation will be performed at your own costs unless the installation fee is
included in the retailer’s price.
• Samsung takes no responsibility for the water line installation. If water leaks occur,
contact the installer of the water line.
To connect the cold water pipe to the water ltering hose
CAUTION
• Make sure the water ltering hose is connected to a cold, potable water source pipe.
Connecting to the hot water pipe may cause the purier to malfunction.
1
A
B
A
A. Close Main Water pipe
B. No gap
1. Shut off the water supply by closing the
main water valve.
2. Locate the cold, potable water pipe (1).
3. Follow the Water Line Installation to
connect to the water pipe.
4. When connection is complete, open the
main water valve and dispense about
3 liters of water. This is to remove
impurities inside the pipe.
Untitled-1 47 2022-01-18 12:11:07