User Manual
Table Of Contents
- T-TYPE_RF9000A_DA68-04023U-00_EN
- Safety information
- What you need to know about the safety instructions
- Important safety symbols and precautions:
- Important safety precautions
- Severe warning signs for transportation and site
- Critical installation warnings
- Installation cautions
- Critical usage warnings
- Usage cautions
- Cleaning cautions
- Critical disposal warnings
- Additional tips for proper usage
- Instructions about the WEEE
- Installation
- Operations
- Maintenance
- Troubleshooting
- Open Source Announcement
- Safety information
- T-TYPE_RF9000A_DA68-04023U-00_MES
- Información sobre seguridad
- Qué debe saber sobre las instrucciones de seguridad
- Símbolos y advertencias de seguridad importantes:
- Precauciones importantes de seguridad
- Señales de advertencia importantes para el transporte y el emplazamiento
- Advertencias muy importantes para la instalación
- Precauciones para la instalación
- Advertencias muy importantes para el uso
- Precauciones de uso
- Precauciones para la limpieza
- Advertencias muy importantes para la eliminación de residuos
- Recomendaciones adicionales para el uso adecuado
- Instrucciones acerca de WEEE
- Instalación
- Funcionamiento
- Mantenimiento
- Solución de problemas
- Open Source Announcement
- Información sobre seguridad
Installation
English42
Installation
STEP 4 Leveling the refrigerator
CAUTION
• When installed, the refrigerator must be leveled on a at, solid oor. Not leveling the
refrigerator can cause damage to the refrigerator or physical injury.
• Leveling must be performed with the refrigerator empty. Make sure no food items are
inside the refrigerator.
• For safety reasons, adjust the front a little higher than the rear.
Level the refrigerator using the special screws (levelers) on the front legs. Use a at-head
screwdriver to turn the levelers.
• To adjust the height of the left side:
Insert a at-head screwdriver into the
leveler of the left side front leg. Turn
the leveler clockwise to raise the left
side or turn it counterclockwise to
lower.
• To adjust the height of the right side:
Insert a at-head screwdriver into the
leveler of the right side front leg. Turn
the leveler clockwise to raise the right
side or turn it counterclockwise to
lower.
Untitled-1 42 2022-01-18 12:11:06