User manual
Setting up your French Door Refrigerator
GETTING READY TO INSTALL THE REFRIGERATOR
Congratulations on your purchase of the Samsung French Door Refrigerator. We hope you enjoy the state-of-art
features and efficiencies that this new appliance offers.
SelectingthebestlocationfortheRefrigerator
• A
location with easy access to the water supply.
• A
location without direct exposure to sunlight.
• A
location with level (or nearly level) flooring.
• A
location with enough space for the Refrigerator doors to
open easily.
•
Allow sufficient space for air circulation of the internal cooling
system.
If the Refrigerator does not have enough space, the internal
cooling system may not work properly.
8_ Setting Up
First thing! Make sure that you can easily move your Refrigerator to its final location by measuring doorways
(both width and height), thresholds, ceilings, stairways, etc.
The following chart details the exact height and depth of Samsung French Door Refrigerator.
•
Allow clearance to the right, left, back and top when installing. This will help reduce power consumption
and keep your energy bills lower.
•
Do not install the Refrigerator where the temperature will go below 10 ºC.
•
Condensation may occur on the french door areas when you use Refrigerator for the first time.
The E.Saver function is automatically set to on when power is supplied to the Refrigerator.
If you experience excess condensation, press the E.Saver button again to turn the feature off.
Depth
MODEL
Capacity(Cu.Ft)
Dimension (inch)
Width
Case Height
with Hinge
without Hinge
with Door
without Door
RF266AB(Internal water dispenser), RF265AB
26
35 ¾
70
68 ⅝
35 ⅝
29 ⅛
1 inch
2 inch
1/2 inch
CAUTION
FLOORING
For proper installation, this regrigerator must be placed on a
level surface of hard material that is the same height as the
rest of the flooring. This surface should be strong enough
to support a fully loaded regrigerator, or approximately
660lbs(299kg). Protect the finish of the flooring. Cut a
large section of the cardboard carton and place under the
regrigerator where you are working. When moving, be sure
to pull the unit straight out and push back in straight.