User guide

70 2B. Settings
5.
Draw your pattern by touching your first onscreen
point, then,
without removing your finger from the
screen, drag your finger over adjacent points until
the grey trace line overlaps each point and they are
highlighted with a green circle.
6. When you have connected at least four dots in a
vertical, horizontal or diagonal direction, lift your
finger from the screen and tap
Continue to record
the pattern.
7. Confirm the new pattern by redrawing it and then
tapping
Confirm.
Once the feature is enabled, additional unlock pattern
options are then enabled from within the
Security &
location menu list.
Configuring the Unlock Pattern Settings
To remove the unlock pattern from the Lock screen:
1. Press > and tap > Location &
security.
2. Remove the checkmark adjacent to the Use visible
pattern field.
䡲 Removing this checkmark prevents the unlock
pattern from displaying on the unlock screen.
What to do if you have forgotten your pattern:
If you fail to draw the correct unlock pattern on the
screen after five attempts, you are prompted to wait for
30 seconds before you can try again.
Important: You must slide your finger on the screen to create
the pattern and not touch individual dots. If you
make a mistake or a point is not properly
selected, a red circle displays.
M580.book Page 70 Tuesday, January 17, 2012 9:48 AM