User guide

Get Your Device Ready
Install the Battery
1. Remove the battery compartment cover on
the back of the device.
2. Align the battery’s contacts with those
inside the battery compartment and gently
press down until the battery is seated.
3. Replace the back cover.
Charge the Battery
1. Insert the USB cable into the charging head.
2. Slide open the Charger/Accessory Jack
cover and insert the small end of the USB
cable into the jack.
3. Plug the charging head into a standard AC
power outlet.
Turn the Device On
•Pressandhold to turn your device on.
Unlock the Screen
•PressandholdtheUnlockicon[ ] and then
slide your finger to the right.
Turn Off the Display Screen
•Press .