Specifications
B
15
Repeat A ↔ B Function
Repeat A
↔
B button
Repeat A
↔
B
button
1
Press
CD( ) or TAPE button.
Result: The CD(TAPE) player starts playing.
2
Press
Repeat A
↔ B
button .
Result
: A Time is memorized.
3
Press
Repeat A
↔ B
button .
Result
: B Time is memorized.
Your selected passages are repeated 3 times.
Power
Surround
Sleep
CD SYNC
REC/Pause
Repeat
A B
CD
Repeat
Program/
Set
Mono/ST
Band
Random
+10
Deck A/B
Counter
Reset
TAPE
EQ
Mute
VOL.
VOL.
Mode
When you select CD(TAPE) Repeat A
↔
B playback, the music passages to
which you were listening is repeated 3 times.
You can decide:
The order of the track desired to listen
The track not desired to listen
A maximum of up to 24 order of tracks desired to listen may be programmed.
Before selecting the track, the CD player should be stopped.
This function may be used simultaneously with the CD Repeat function.
4
When you have finished the Repeat playback, Press Repeat
A
↔ B
.
When setting the Repeat A
↔
B function during tape playback, an end point B
cannot be set within seven seconds after setting the start point A.
1
Press Program/Set.
Result: The following indications are displayed:
2
Select the required track by pressing:
or
to move back through the tracks
or
to move forward through the tracks
3
Press Program/Set to confirm your selection.
Result: The selection is stored and is displayed.
GB
16
Programming the Order of Playback
Power
Surround
Sleep
CD SYNC
REC/Pause
Repeat
A B
CD
Repeat
Program/
Set
Mono/ST
Band
Random
+10
Deck A/B
Counter
Reset
TAPE
EQ
Mute
VOL.
VOL.
Mode
1,3 ,6
2
5
1,3,6
2
5
program no. Track Track no.
4
To select other tracks, repeat Steps 2 to 3.